! Started logfile: /scr/pima/bg219e_uvs/J0847-1754_X_dfm.log on Thu May 19 18:31:34 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0847-1754_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0847-1754_X_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.883621 visibilities/baseline/integration-bin.
! Found source: J0847-1754
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22140 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0847-1754_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003441Jy  sigma=21.875801
! Fit after  self-cal, rms=0.945610Jy  sigma=20.601073
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7986 mas, bmaj=3.054 mas, bpa=17.25 degrees
! Estimated noise=0.460113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0402694 Jy
! Component: 100  -  total flux cleaned = 0.0499275 Jy
! Total flux subtracted in 100 components = 0.0499275 Jy
! Clean residual min=-0.003280 max=0.004298 Jy/beam
! Clean residual mean=0.000010 rms=0.000918 Jy/beam
! Combined flux in latest and established models = 0.0499275 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0499275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068427Jy  sigma=1.413382
! Fit after  self-cal, rms=0.067025Jy  sigma=1.383854
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00623135 Jy
! Component: 100  -  total flux cleaned = 0.0101506 Jy
! Total flux subtracted in 100 components = 0.0101506 Jy
! Clean residual min=-0.003012 max=0.004208 Jy/beam
! Clean residual mean=0.000008 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.060078 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 13 components and 0.060078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065902Jy  sigma=1.356747
! Fit after  self-cal, rms=0.065880Jy  sigma=1.356154
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=3.269 mas, bpa=14.84 degrees
! Estimated noise=0.226895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00702459 Jy
! Component: 100  -  total flux cleaned = 0.0108755 Jy
! Component: 150  -  total flux cleaned = 0.013365 Jy
! Component: 200  -  total flux cleaned = 0.0151325 Jy
! Total flux subtracted in 200 components = 0.0151325 Jy
! Clean residual min=-0.001795 max=0.002481 Jy/beam
! Clean residual mean=0.000001 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.0752105 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 46 components and 0.0752106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065138Jy  sigma=1.337893
! Fit after  self-cal, rms=0.065007Jy  sigma=1.335539
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.015 x 3.269 at 14.84 degrees (North through East)
! Clean map  min=-0.0019323  max=0.057495 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.03     KP        1.03     
!   LA        0.91     NL        1.13     OV        0.97     PT        0.99     
!   SC        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.06     KP        0.99     
!   LA        0.94     NL        1.04     OV        1.01     PT        1.03     
!   SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.95     KP        1.01     
!   LA        0.89     NL        1.04     OV        0.99     PT        1.06     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.94     KP        1.06     
!   LA        0.93     NL        1.14     OV        1.03     PT        1.02     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        0.96     KP        1.02     
!   LA        0.89     NL        1.03     OV        0.98     PT        1.00     
!   SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.86     KP        0.98     
!   LA        0.99     NL        1.20     OV        1.03     PT        0.96     
!   SC        0.90     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        0.85     KP        1.09     
!   LA        0.98     NL        1.05     OV        0.97     PT        0.98     
!   SC        1.09     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        0.94     KP        1.02     
!   LA        0.94     NL        1.06     OV        0.99     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        0.88     KP        1.00     
!   LA        0.93     NL        1.07     OV        0.91     PT        0.95     
!   SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.94     KP        1.04     
!   LA        0.96     NL        1.07     OV        0.99     PT        0.92     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.90     HN        0.93     KP        0.99     
!   LA        0.94     NL        0.98     OV        0.98     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.89     HN        1.00     KP        0.96     
!   LA        0.93     NL        1.03     OV        1.07     PT        1.01     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.065007Jy  sigma=1.335539
! Fit after  self-cal, rms=0.063161Jy  sigma=1.331476
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.016 mas, bmaj=3.268 mas, bpa=14.65 degrees
! Estimated noise=0.22267 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161622 Jy
! Component: 100  -  total flux cleaned = 0.00173766 Jy
! Component: 150  -  total flux cleaned = 0.00166836 Jy
! Component: 200  -  total flux cleaned = 0.00160695 Jy
! Total flux subtracted in 200 components = 0.00160695 Jy
! Clean residual min=-0.001643 max=0.002077 Jy/beam
! Clean residual mean=0.000005 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0768175 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 67 components and 0.0768175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063105Jy  sigma=1.330208
! Fit after  self-cal, rms=0.063120Jy  sigma=1.329745
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063120Jy  sigma=1.329745
! Fit after  self-cal, rms=0.063124Jy  sigma=1.328005
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.015 mas, bmaj=3.264 mas, bpa=14.52 degrees
! Estimated noise=0.22289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000794521 Jy
! Component: 100  -  total flux cleaned = 0.000824197 Jy
! Component: 150  -  total flux cleaned = 0.000745163 Jy
! Component: 200  -  total flux cleaned = 0.000699086 Jy
! Total flux subtracted in 200 components = 0.000699086 Jy
! Clean residual min=-0.001474 max=0.001911 Jy/beam
! Clean residual mean=0.000004 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.0775166 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 0.0775166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063098Jy  sigma=1.327440
! Fit after  self-cal, rms=0.063092Jy  sigma=1.327022
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017589 Jy
! Component: 100  -  total flux cleaned = 0.00268538 Jy
! Component: 150  -  total flux cleaned = 0.00304513 Jy
! Component: 200  -  total flux cleaned = 0.00304619 Jy
! Total flux subtracted in 200 components = 0.00304619 Jy
! Clean residual min=-0.001309 max=0.001683 Jy/beam
! Clean residual mean=0.000003 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.0805628 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 95 components and 0.0805627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063038Jy  sigma=1.325838
! Fit after  self-cal, rms=0.063032Jy  sigma=1.325659
! Inverting map 
! Added new window around map position (5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154021 Jy
! Component: 100  -  total flux cleaned = 0.00215315 Jy
! Component: 150  -  total flux cleaned = 0.00225375 Jy
! Component: 200  -  total flux cleaned = 0.00227741 Jy
! Total flux subtracted in 200 components = 0.00227741 Jy
! Clean residual min=-0.001157 max=0.001233 Jy/beam
! Clean residual mean=0.000002 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.0828401 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 124 components and 0.0828402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062991Jy  sigma=1.324720
! Fit after  self-cal, rms=0.062989Jy  sigma=1.324572
! Inverting map 
! Added new window around map position (-14.8, 33.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000673218 Jy
! Component: 100  -  total flux cleaned = 0.0010199 Jy
! Component: 150  -  total flux cleaned = 0.00112942 Jy
! Component: 200  -  total flux cleaned = 0.00114953 Jy
! Total flux subtracted in 200 components = 0.00114953 Jy
! Clean residual min=-0.001045 max=0.001123 Jy/beam
! Clean residual mean=0.000002 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.0839897 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 143 components and 0.0839897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062963Jy  sigma=1.324040
! Fit after  self-cal, rms=0.062955Jy  sigma=1.323912
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062955Jy  sigma=1.323912
! Fit after  self-cal, rms=0.062885Jy  sigma=1.323627
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=3.26 mas, bpa=14.47 degrees
! Estimated noise=0.22263 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000492763 Jy
! Component: 100  -  total flux cleaned = 0.000822601 Jy
! Component: 150  -  total flux cleaned = 0.00101787 Jy
! Component: 200  -  total flux cleaned = 0.00111411 Jy
! Total flux subtracted in 200 components = 0.00111411 Jy
! Clean residual min=-0.001032 max=0.001085 Jy/beam
! Clean residual mean=0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0851038 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 161 components and 0.0851038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062873Jy  sigma=1.323372
! Fit after  self-cal, rms=0.062872Jy  sigma=1.323315
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (26.4, 27.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000964558 Jy
! Component: 100  -  total flux cleaned = 0.00116771 Jy
! Component: 150  -  total flux cleaned = 0.00124406 Jy
! Component: 200  -  total flux cleaned = 0.00129362 Jy
! Total flux subtracted in 200 components = 0.00129362 Jy
! Clean residual min=-0.000973 max=0.000993 Jy/beam
! Clean residual mean=0.000001 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0863974 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 177 components and 0.0863974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062853Jy  sigma=1.322933
! Fit after  self-cal, rms=0.062849Jy  sigma=1.322885
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062849Jy  sigma=1.322885
! Fit after  self-cal, rms=0.062831Jy  sigma=1.322852
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.184 mas, bmaj=4.548 mas, bpa=2.815 degrees
! Estimated noise=0.265738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554465 Jy
! Component: 100  -  total flux cleaned = 0.000744156 Jy
! Component: 150  -  total flux cleaned = 0.000847026 Jy
! Component: 200  -  total flux cleaned = 0.000913848 Jy
! Total flux subtracted in 200 components = 0.000913848 Jy
! Clean residual min=-0.000929 max=0.001066 Jy/beam
! Clean residual mean=0.000002 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.0873113 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 208 components and 0.0873113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062825Jy  sigma=1.322717
! Fit after  self-cal, rms=0.062824Jy  sigma=1.322702
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193701 Jy
! Component: 100  -  total flux cleaned = 0.000243472 Jy
! Component: 150  -  total flux cleaned = 0.000278402 Jy
! Component: 200  -  total flux cleaned = 0.000289747 Jy
! Total flux subtracted in 200 components = 0.000289747 Jy
! Clean residual min=-0.000934 max=0.001050 Jy/beam
! Clean residual mean=0.000002 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.087601 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 220 components and 0.087601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062820Jy  sigma=1.322627
! Fit after  self-cal, rms=0.062819Jy  sigma=1.322622
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=3.259 mas, bpa=14.46 degrees
! Estimated noise=0.222575 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 3.259 at 14.46 degrees (North through East)
! Clean map  min=-0.0010844  max=0.056363 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7994 mas, bmaj=3.036 mas, bpa=16.91 degrees
! Estimated noise=0.454862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.040448 Jy
! Component: 100  -  total flux cleaned = 0.0515651 Jy
! Component: 150  -  total flux cleaned = 0.0579598 Jy
! Component: 200  -  total flux cleaned = 0.0625379 Jy
! Total flux subtracted in 200 components = 0.0625379 Jy
! Clean residual min=-0.003243 max=0.002943 Jy/beam
! Clean residual mean=0.000011 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.0625378 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0625378 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=3.259 mas, bpa=14.46 degrees
! Estimated noise=0.222575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00643466 Jy
! Component: 100  -  total flux cleaned = 0.0103008 Jy
! Component: 150  -  total flux cleaned = 0.013194 Jy
! Component: 200  -  total flux cleaned = 0.015502 Jy
! Total flux subtracted in 200 components = 0.015502 Jy
! Clean residual min=-0.001569 max=0.001652 Jy/beam
! Clean residual mean=0.000003 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.0780399 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 59 components and 0.0780399 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.184 mas, bmaj=4.548 mas, bpa=2.815 degrees
! Estimated noise=0.265738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272853 Jy
! Component: 100  -  total flux cleaned = 0.00466327 Jy
! Component: 150  -  total flux cleaned = 0.00615655 Jy
! Component: 200  -  total flux cleaned = 0.00702409 Jy
! Total flux subtracted in 200 components = 0.00702409 Jy
! Clean residual min=-0.001267 max=0.001366 Jy/beam
! Clean residual mean=0.000004 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.085064 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000684369 Jy
! Component: 100  -  total flux cleaned = 0.00119813 Jy
! Component: 150  -  total flux cleaned = 0.00152527 Jy
! Component: 200  -  total flux cleaned = 0.00176364 Jy
! Total flux subtracted in 200 components = 0.00176364 Jy
! Clean residual min=-0.001003 max=0.001203 Jy/beam
! Clean residual mean=0.000004 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0868276 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 137 components and 0.0868276 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=3.259 mas, bpa=14.46 degrees
! Estimated noise=0.222575 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135022 Jy
! Component: 100  -  total flux cleaned = 0.000168205 Jy
! Component: 150  -  total flux cleaned = 0.000254814 Jy
! Component: 200  -  total flux cleaned = 0.000362019 Jy
! Total flux subtracted in 200 components = 0.000362019 Jy
! Clean residual min=-0.000958 max=0.001077 Jy/beam
! Clean residual mean=0.000002 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.0871896 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 163 components and 0.0871896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062856Jy  sigma=1.323345
! Fit after  self-cal, rms=0.062848Jy  sigma=1.323120
wmodel /J0847-1754_X_map.mod
! wmodel: Unable to open new model file: /J0847-1754_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0847-1754_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.014 x 3.259 at 14.46 degrees (North through East)
! Clean map  min=-0.00092041  max=0.055509 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0847-1754_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0555091 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000244592 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.3219 1.3219 2.64381 5.28762 10.5752 21.1505 42.3009 84.6018
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.055 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  226.945 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0847-1754_X_dfm.log closed on Thu May 19 18:31:37 2016