! Started logfile: /scr/pima/bg219e_uvs/J0846-2607_S_uvs.log on Thu Apr  7 06:40:12 2016
obs /scr/pima/bg219e_uvs/J0846-2607_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0846-2607_S_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.824786 visibilities/baseline/integration-bin.
! Found source: J0846-2607
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6176 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0846-2607_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018623Jy  sigma=17.005357
! Fit after  self-cal, rms=0.847952Jy  sigma=13.938658
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.885 mas, bmaj=13.57 mas, bpa=14.39 degrees
! Estimated noise=1.02755 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103382 Jy
! Component: 100  -  total flux cleaned = 0.14568 Jy
! Total flux subtracted in 100 components = 0.14568 Jy
! Clean residual min=-0.009990 max=0.020940 Jy/beam
! Clean residual mean=-0.000003 rms=0.003278 Jy/beam
! Combined flux in latest and established models = 0.14568 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.14568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108980Jy  sigma=1.774190
! Fit after  self-cal, rms=0.108849Jy  sigma=1.771868
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250487 Jy
! Component: 100  -  total flux cleaned = 0.041016 Jy
! Total flux subtracted in 100 components = 0.041016 Jy
! Clean residual min=-0.007610 max=0.011351 Jy/beam
! Clean residual mean=-0.000002 rms=0.002221 Jy/beam
! Combined flux in latest and established models = 0.186696 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 46 components and 0.186696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098458Jy  sigma=1.566501
! Fit after  self-cal, rms=0.098450Jy  sigma=1.565848
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.814 mas, bmaj=15.46 mas, bpa=13.27 degrees
! Estimated noise=0.584714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210779 Jy
! Component: 100  -  total flux cleaned = 0.0324601 Jy
! Component: 150  -  total flux cleaned = 0.0392349 Jy
! Component: 200  -  total flux cleaned = 0.0433723 Jy
! Total flux subtracted in 200 components = 0.0433723 Jy
! Clean residual min=-0.009421 max=0.014542 Jy/beam
! Clean residual mean=0.000002 rms=0.002608 Jy/beam
! Combined flux in latest and established models = 0.230069 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 91 components and 0.230069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094320Jy  sigma=1.485466
! Fit after  self-cal, rms=0.094288Jy  sigma=1.484477
! Inverting map 
! Added new window around map position (6.5, 26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137191 Jy
! Component: 100  -  total flux cleaned = 0.0205847 Jy
! Component: 150  -  total flux cleaned = 0.0247831 Jy
! Component: 200  -  total flux cleaned = 0.0274262 Jy
! Total flux subtracted in 200 components = 0.0274262 Jy
! Clean residual min=-0.007855 max=0.005865 Jy/beam
! Clean residual mean=0.000021 rms=0.001713 Jy/beam
! Combined flux in latest and established models = 0.257495 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 160 components and 0.257495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092453Jy  sigma=1.448199
! Fit after  self-cal, rms=0.092009Jy  sigma=1.441291
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.814 x 15.46 at 13.27 degrees (North through East)
! Clean map  min=-0.0070818  max=0.15204 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.06     KP        1.01     
!   LA        0.98     NL        1.12     OV        0.96     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.03     KP        1.02     
!   LA        0.99     NL        1.03     OV        0.96     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.97     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.092009Jy  sigma=1.441291
! Fit after  self-cal, rms=0.091452Jy  sigma=1.434917
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.826 mas, bmaj=15.61 mas, bpa=13.37 degrees
! Estimated noise=0.577188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000835134 Jy
! Component: 100  -  total flux cleaned = 0.0019384 Jy
! Component: 150  -  total flux cleaned = 0.00247214 Jy
! Component: 200  -  total flux cleaned = 0.00308008 Jy
! Total flux subtracted in 200 components = 0.00308008 Jy
! Clean residual min=-0.005948 max=0.004706 Jy/beam
! Clean residual mean=0.000029 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.260575 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 212 components and 0.260575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091135Jy  sigma=1.427653
! Fit after  self-cal, rms=0.091093Jy  sigma=1.426800
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091093Jy  sigma=1.426800
! Fit after  self-cal, rms=0.089748Jy  sigma=1.435982
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.843 mas, bmaj=15.66 mas, bpa=13.36 degrees
! Estimated noise=0.568102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00286768 Jy
! Component: 100  -  total flux cleaned = -0.00267337 Jy
! Component: 150  -  total flux cleaned = -0.00235022 Jy
! Component: 200  -  total flux cleaned = -0.0020104 Jy
! Total flux subtracted in 200 components = -0.0020104 Jy
! Clean residual min=-0.005506 max=0.004408 Jy/beam
! Clean residual mean=0.000035 rms=0.001229 Jy/beam
! Combined flux in latest and established models = 0.258565 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 260 components and 0.258564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089554Jy  sigma=1.430221
! Fit after  self-cal, rms=0.089525Jy  sigma=1.429837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134293 Jy
! Component: 100  -  total flux cleaned = 0.00184989 Jy
! Component: 150  -  total flux cleaned = 0.00229025 Jy
! Component: 200  -  total flux cleaned = 0.00264092 Jy
! Total flux subtracted in 200 components = 0.00264092 Jy
! Clean residual min=-0.005213 max=0.004340 Jy/beam
! Clean residual mean=0.000036 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.261205 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 281 components and 0.261205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089455Jy  sigma=1.428280
! Fit after  self-cal, rms=0.089440Jy  sigma=1.428093
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089440Jy  sigma=1.428093
! Fit after  self-cal, rms=0.088394Jy  sigma=1.425624
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.857 mas, bmaj=15.65 mas, bpa=13.24 degrees
! Estimated noise=0.559378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00284112 Jy
! Component: 100  -  total flux cleaned = -0.00270906 Jy
! Component: 150  -  total flux cleaned = -0.0023429 Jy
! Component: 200  -  total flux cleaned = -0.00202847 Jy
! Total flux subtracted in 200 components = -0.00202847 Jy
! Clean residual min=-0.004829 max=0.004367 Jy/beam
! Clean residual mean=0.000035 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 0.259177 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 314 components and 0.259177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088300Jy  sigma=1.422423
! Fit after  self-cal, rms=0.088294Jy  sigma=1.422278
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000734469 Jy
! Component: 100  -  total flux cleaned = 0.00108825 Jy
! Component: 150  -  total flux cleaned = 0.00140535 Jy
! Component: 200  -  total flux cleaned = 0.00169486 Jy
! Total flux subtracted in 200 components = 0.00169486 Jy
! Clean residual min=-0.004639 max=0.004311 Jy/beam
! Clean residual mean=0.000036 rms=0.001103 Jy/beam
! Combined flux in latest and established models = 0.260872 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 328 components and 0.260872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088261Jy  sigma=1.421475
! Fit after  self-cal, rms=0.088256Jy  sigma=1.421396
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088256Jy  sigma=1.421396
! Fit after  self-cal, rms=0.087186Jy  sigma=1.420337
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.587 mas, bmaj=22.71 mas, bpa=5.695 degrees
! Estimated noise=0.627095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00231076 Jy
! Component: 100  -  total flux cleaned = -0.00182125 Jy
! Component: 150  -  total flux cleaned = -0.00140983 Jy
! Component: 200  -  total flux cleaned = -0.00122056 Jy
! Total flux subtracted in 200 components = -0.00122056 Jy
! Clean residual min=-0.005547 max=0.005104 Jy/beam
! Clean residual mean=0.000060 rms=0.001476 Jy/beam
! Combined flux in latest and established models = 0.259651 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 346 components and 0.259651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087135Jy  sigma=1.418379
! Fit after  self-cal, rms=0.087124Jy  sigma=1.418277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000617183 Jy
! Component: 100  -  total flux cleaned = 0.000877771 Jy
! Component: 150  -  total flux cleaned = 0.00105339 Jy
! Component: 200  -  total flux cleaned = 0.00122131 Jy
! Total flux subtracted in 200 components = 0.00122131 Jy
! Clean residual min=-0.005385 max=0.005068 Jy/beam
! Clean residual mean=0.000061 rms=0.001458 Jy/beam
! Combined flux in latest and established models = 0.260873 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 357 components and 0.260872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087108Jy  sigma=1.417910
! Fit after  self-cal, rms=0.087104Jy  sigma=1.417875
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=15.66 mas, bpa=13.18 degrees
! Estimated noise=0.552076 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.869 x 15.66 at 13.18 degrees (North through East)
! Clean map  min=-0.0043072  max=0.1405 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.911 mas, bmaj=13.65 mas, bpa=14.32 degrees
! Estimated noise=0.985646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0980064 Jy
! Component: 100  -  total flux cleaned = 0.137769 Jy
! Component: 150  -  total flux cleaned = 0.161107 Jy
! Component: 200  -  total flux cleaned = 0.176982 Jy
! Total flux subtracted in 200 components = 0.176982 Jy
! Clean residual min=-0.006562 max=0.008959 Jy/beam
! Clean residual mean=-0.000001 rms=0.002086 Jy/beam
! Combined flux in latest and established models = 0.176982 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.176982 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=15.66 mas, bpa=13.18 degrees
! Estimated noise=0.552076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218756 Jy
! Component: 100  -  total flux cleaned = 0.0360243 Jy
! Component: 150  -  total flux cleaned = 0.0459727 Jy
! Component: 200  -  total flux cleaned = 0.0533572 Jy
! Total flux subtracted in 200 components = 0.0533572 Jy
! Clean residual min=-0.005765 max=0.005004 Jy/beam
! Clean residual mean=0.000019 rms=0.001598 Jy/beam
! Combined flux in latest and established models = 0.23034 Jy
! Adding 112 model components to the UV plane model.
! The established model now contains 152 components and 0.23034 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.587 mas, bmaj=22.71 mas, bpa=5.695 degrees
! Estimated noise=0.627095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00794246 Jy
! Component: 100  -  total flux cleaned = 0.0133457 Jy
! Component: 150  -  total flux cleaned = 0.0173317 Jy
! Component: 200  -  total flux cleaned = 0.0204003 Jy
! Total flux subtracted in 200 components = 0.0204003 Jy
! Clean residual min=-0.006093 max=0.004743 Jy/beam
! Clean residual mean=0.000052 rms=0.001576 Jy/beam
! Combined flux in latest and established models = 0.25074 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241233 Jy
! Component: 100  -  total flux cleaned = 0.00433134 Jy
! Component: 150  -  total flux cleaned = 0.00587218 Jy
! Component: 200  -  total flux cleaned = 0.00711581 Jy
! Total flux subtracted in 200 components = 0.00711581 Jy
! Clean residual min=-0.005581 max=0.004514 Jy/beam
! Clean residual mean=0.000058 rms=0.001449 Jy/beam
! Combined flux in latest and established models = 0.257856 Jy
! Adding 117 model components to the UV plane model.
! The established model now contains 256 components and 0.257856 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=15.66 mas, bpa=13.18 degrees
! Estimated noise=0.552076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101499 Jy
! Component: 100  -  total flux cleaned = -5.1592e-05 Jy
! Component: 150  -  total flux cleaned = 7.5612e-05 Jy
! Component: 200  -  total flux cleaned = 0.00023419 Jy
! Total flux subtracted in 200 components = 0.00023419 Jy
! Clean residual min=-0.004628 max=0.003871 Jy/beam
! Clean residual mean=0.000034 rms=0.001063 Jy/beam
! Combined flux in latest and established models = 0.25809 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 272 components and 0.25809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087128Jy  sigma=1.417777
! Fit after  self-cal, rms=0.087114Jy  sigma=1.417470
wmodel /scr/pima/bg219e_uvs/J0846-2607_S_map.mod
! Writing 272 model components to file: /scr/pima/bg219e_uvs/J0846-2607_S_map.mod
wobs /scr/pima/bg219e_uvs/J0846-2607_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0846-2607_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J0846-2607_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J0846-2607_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000548984 Jy
! Component: 100  -  total flux cleaned = -0.000486293 Jy
! Component: 150  -  total flux cleaned = -0.000306937 Jy
! Component: 200  -  total flux cleaned = 3.27734e-05 Jy
! Component: 250  -  total flux cleaned = 0.000568109 Jy
! Component: 300  -  total flux cleaned = 0.00087375 Jy
! Component: 350  -  total flux cleaned = 0.00111662 Jy
! Component: 400  -  total flux cleaned = 0.00121111 Jy
! Component: 450  -  total flux cleaned = 0.00139111 Jy
! Component: 500  -  total flux cleaned = 0.00152206 Jy
! Component: 550  -  total flux cleaned = 0.00177369 Jy
! Component: 600  -  total flux cleaned = 0.00201758 Jy
! Component: 650  -  total flux cleaned = 0.00233458 Jy
! Component: 700  -  total flux cleaned = 0.00275869 Jy
! Component: 750  -  total flux cleaned = 0.00309696 Jy
! Component: 800  -  total flux cleaned = 0.00331665 Jy
! Component: 850  -  total flux cleaned = 0.00363927 Jy
! Component: 900  -  total flux cleaned = 0.00391905 Jy
! Component: 950  -  total flux cleaned = 0.0042265 Jy
! Component: 1000  -  total flux cleaned = 0.00449475 Jy
! Component: 1050  -  total flux cleaned = 0.0048233 Jy
! Component: 1100  -  total flux cleaned = 0.00504842 Jy
! Component: 1150  -  total flux cleaned = 0.00526923 Jy
! Component: 1200  -  total flux cleaned = 0.0054862 Jy
! Component: 1250  -  total flux cleaned = 0.00572998 Jy
! Component: 1300  -  total flux cleaned = 0.00588043 Jy
! Component: 1350  -  total flux cleaned = 0.00617555 Jy
! Component: 1400  -  total flux cleaned = 0.00629197 Jy
! Component: 1450  -  total flux cleaned = 0.00643501 Jy
! Component: 1500  -  total flux cleaned = 0.00663217 Jy
! Component: 1550  -  total flux cleaned = 0.00685396 Jy
! Component: 1600  -  total flux cleaned = 0.00709892 Jy
! Component: 1650  -  total flux cleaned = 0.00723319 Jy
! Component: 1700  -  total flux cleaned = 0.00739246 Jy
! Component: 1750  -  total flux cleaned = 0.00754908 Jy
! Component: 1800  -  total flux cleaned = 0.00770364 Jy
! Component: 1850  -  total flux cleaned = 0.00788162 Jy
! Component: 1900  -  total flux cleaned = 0.00795661 Jy
! Component: 1950  -  total flux cleaned = 0.00807986 Jy
! Component: 2000  -  total flux cleaned = 0.00817755 Jy
! Component: 2050  -  total flux cleaned = 0.00829842 Jy
! Component: 2100  -  total flux cleaned = 0.00844089 Jy
! Component: 2150  -  total flux cleaned = 0.00855837 Jy
! Component: 2200  -  total flux cleaned = 0.00860447 Jy
! Component: 2250  -  total flux cleaned = 0.00876497 Jy
! Component: 2300  -  total flux cleaned = 0.00885576 Jy
! Component: 2350  -  total flux cleaned = 0.00901247 Jy
! Component: 2400  -  total flux cleaned = 0.00901206 Jy
! Component: 2450  -  total flux cleaned = 0.0091219 Jy
! Component: 2500  -  total flux cleaned = 0.0092089 Jy
! Component: 2550  -  total flux cleaned = 0.00929477 Jy
! Component: 2600  -  total flux cleaned = 0.00929508 Jy
! Component: 2650  -  total flux cleaned = 0.00944187 Jy
! Component: 2700  -  total flux cleaned = 0.00956644 Jy
! Component: 2750  -  total flux cleaned = 0.00958708 Jy
! Component: 2800  -  total flux cleaned = 0.00975008 Jy
! Component: 2850  -  total flux cleaned = 0.00983087 Jy
! Component: 2900  -  total flux cleaned = 0.00993064 Jy
! Component: 2950  -  total flux cleaned = 0.0100098 Jy
! Component: 3000  -  total flux cleaned = 0.0101077 Jy
! Component: 3050  -  total flux cleaned = 0.010224 Jy
! Component: 3100  -  total flux cleaned = 0.0102238 Jy
! Component: 3150  -  total flux cleaned = 0.010338 Jy
! Component: 3200  -  total flux cleaned = 0.0103379 Jy
! Component: 3250  -  total flux cleaned = 0.0104314 Jy
! Component: 3300  -  total flux cleaned = 0.010413 Jy
! Component: 3350  -  total flux cleaned = 0.0104316 Jy
! Component: 3400  -  total flux cleaned = 0.0105047 Jy
! Component: 3450  -  total flux cleaned = 0.0105588 Jy
! Component: 3500  -  total flux cleaned = 0.0105588 Jy
! Component: 3550  -  total flux cleaned = 0.0106125 Jy
! Component: 3600  -  total flux cleaned = 0.0107885 Jy
! Component: 3650  -  total flux cleaned = 0.0108059 Jy
! Component: 3700  -  total flux cleaned = 0.0107538 Jy
! Component: 3750  -  total flux cleaned = 0.0108053 Jy
! Component: 3800  -  total flux cleaned = 0.0108565 Jy
! Component: 3850  -  total flux cleaned = 0.0108564 Jy
! Component: 3900  -  total flux cleaned = 0.0109571 Jy
! Component: 3950  -  total flux cleaned = 0.0109735 Jy
! Component: 4000  -  total flux cleaned = 0.010924 Jy
! Component: 4050  -  total flux cleaned = 0.0109571 Jy
! Total flux subtracted in 4096 components = 0.0110225 Jy
! Clean residual min=-0.001485 max=0.000889 Jy/beam
! Clean residual mean=0.000015 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.269112 Jy
keep
! Adding 353 model components to the UV plane model.
! The established model now contains 625 components and 0.269112 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0846-2607_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.869 x 15.66 at 13.18 degrees (North through East)
! Clean map  min=-0.0033147  max=0.14254 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0846-2607_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.142539 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000340574 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.716803 0.716803 1.43361 2.86721 5.73442 11.4688 22.9377 45.8754 91.7508
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.142 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  418.525 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0846-2607_S_uvs.log closed on Thu Apr  7 06:40:16 2016