! Started logfile: /scr/pima/bg219e_uvs/J0825+0309_S_dfm.log on Thu May 19 18:30:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0825+0309_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0825+0309_S_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.813889 visibilities/baseline/integration-bin.
! Found source: J0825+0309
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2344 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0825+0309_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.305319Jy  sigma=21.099485
! Fit after  self-cal, rms=0.177355Jy  sigma=2.898874
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.933 mas, bmaj=6.943 mas, bpa=0.7812 degrees
! Estimated noise=1.12838 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.656483 Jy
! Component: 100  -  total flux cleaned = 0.803888 Jy
! Total flux subtracted in 100 components = 0.803888 Jy
! Clean residual min=-0.013897 max=0.050188 Jy/beam
! Clean residual mean=0.000061 rms=0.004663 Jy/beam
! Combined flux in latest and established models = 0.803888 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.803888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110114Jy  sigma=1.657984
! Fit after  self-cal, rms=0.110071Jy  sigma=1.657508
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0482289 Jy
! Component: 100  -  total flux cleaned = 0.0688166 Jy
! Total flux subtracted in 100 components = 0.0688166 Jy
! Clean residual min=-0.010273 max=0.017990 Jy/beam
! Clean residual mean=0.000015 rms=0.002721 Jy/beam
! Combined flux in latest and established models = 0.872705 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 24 components and 0.872705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087123Jy  sigma=1.288297
! Fit after  self-cal, rms=0.087013Jy  sigma=1.286892
! Inverting map 
! Added new window around map position (4, 13).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164228 Jy
! Component: 100  -  total flux cleaned = 0.0268744 Jy
! Total flux subtracted in 100 components = 0.0268744 Jy
! Clean residual min=-0.008209 max=0.011412 Jy/beam
! Clean residual mean=0.000002 rms=0.002329 Jy/beam
! Combined flux in latest and established models = 0.899579 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 42 components and 0.899579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083365Jy  sigma=1.228153
! Fit after  self-cal, rms=0.083278Jy  sigma=1.226654
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.458 mas, bmaj=7.717 mas, bpa=0.5873 degrees
! Estimated noise=0.931902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00841278 Jy
! Component: 100  -  total flux cleaned = 0.0124172 Jy
! Component: 150  -  total flux cleaned = 0.0142855 Jy
! Component: 200  -  total flux cleaned = 0.0155491 Jy
! Total flux subtracted in 200 components = 0.0155491 Jy
! Clean residual min=-0.008389 max=0.008372 Jy/beam
! Clean residual mean=-0.000013 rms=0.001996 Jy/beam
! Combined flux in latest and established models = 0.915128 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 52 components and 0.915128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082058Jy  sigma=1.210800
! Fit after  self-cal, rms=0.082018Jy  sigma=1.210172
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.458 x 7.717 at 0.5873 degrees (North through East)
! Clean map  min=-0.0082953  max=0.84426 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.00     KP        1.01     
!   LA        1.01     MK        1.03     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.99     KP        1.00     
!   LA        1.01     MK        1.00     NL        0.98     OV        0.99     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.99     KP        0.99     
!   LA        1.01     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.95     KP        0.97     
!   LA        0.99     MK        1.02     NL        0.97     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.082018Jy  sigma=1.210172
! Fit after  self-cal, rms=0.076541Jy  sigma=1.153143
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.465 mas, bmaj=7.72 mas, bpa=0.691 degrees
! Estimated noise=0.930828 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00363854 Jy
! Component: 100  -  total flux cleaned = 0.00403927 Jy
! Component: 150  -  total flux cleaned = 0.00423648 Jy
! Component: 200  -  total flux cleaned = 0.00451999 Jy
! Total flux subtracted in 200 components = 0.00451999 Jy
! Clean residual min=-0.006433 max=0.007122 Jy/beam
! Clean residual mean=0.000001 rms=0.001685 Jy/beam
! Combined flux in latest and established models = 0.919648 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.919648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076333Jy  sigma=1.150000
! Fit after  self-cal, rms=0.076318Jy  sigma=1.149836
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076318Jy  sigma=1.149836
! Fit after  self-cal, rms=0.069255Jy  sigma=1.060491
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.465 mas, bmaj=7.722 mas, bpa=0.6819 degrees
! Estimated noise=0.929629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195578 Jy
! Component: 100  -  total flux cleaned = 0.00225642 Jy
! Component: 150  -  total flux cleaned = 0.00237429 Jy
! Component: 200  -  total flux cleaned = 0.00242181 Jy
! Total flux subtracted in 200 components = 0.00242181 Jy
! Clean residual min=-0.004086 max=0.004547 Jy/beam
! Clean residual mean=-0.000002 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.92207 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 80 components and 0.92207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069098Jy  sigma=1.058429
! Fit after  self-cal, rms=0.069072Jy  sigma=1.058232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25, 82.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00370569 Jy
! Component: 100  -  total flux cleaned = 0.00471594 Jy
! Component: 150  -  total flux cleaned = 0.00540541 Jy
! Component: 200  -  total flux cleaned = 0.00593701 Jy
! Total flux subtracted in 200 components = 0.00593701 Jy
! Clean residual min=-0.003925 max=0.003892 Jy/beam
! Clean residual mean=0.000002 rms=0.000969 Jy/beam
! Combined flux in latest and established models = 0.928007 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 0.928007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068803Jy  sigma=1.054268
! Fit after  self-cal, rms=0.068787Jy  sigma=1.054148
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068787Jy  sigma=1.054148
! Fit after  self-cal, rms=0.068702Jy  sigma=1.053737
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.465 mas, bmaj=7.722 mas, bpa=0.6659 degrees
! Estimated noise=0.92907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122863 Jy
! Component: 100  -  total flux cleaned = 0.00133891 Jy
! Component: 150  -  total flux cleaned = 0.00148784 Jy
! Component: 200  -  total flux cleaned = 0.00153465 Jy
! Total flux subtracted in 200 components = 0.00153465 Jy
! Clean residual min=-0.003764 max=0.003840 Jy/beam
! Clean residual mean=0.000003 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.929542 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.929542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068619Jy  sigma=1.052623
! Fit after  self-cal, rms=0.068611Jy  sigma=1.052568
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002992 Jy
! Component: 100  -  total flux cleaned = 0.000384268 Jy
! Component: 150  -  total flux cleaned = 0.000462003 Jy
! Component: 200  -  total flux cleaned = 0.000537308 Jy
! Total flux subtracted in 200 components = 0.000537308 Jy
! Clean residual min=-0.003733 max=0.003796 Jy/beam
! Clean residual mean=0.000003 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.930079 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 121 components and 0.930079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068565Jy  sigma=1.051905
! Fit after  self-cal, rms=0.068560Jy  sigma=1.051874
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068560Jy  sigma=1.051874
! Fit after  self-cal, rms=0.068527Jy  sigma=1.051746
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.58 mas, bmaj=11.68 mas, bpa=2.438 degrees
! Estimated noise=1.16633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000974479 Jy
! Component: 100  -  total flux cleaned = 0.00075683 Jy
! Component: 150  -  total flux cleaned = 0.000531948 Jy
! Component: 200  -  total flux cleaned = 0.000350344 Jy
! Total flux subtracted in 200 components = 0.000350344 Jy
! Clean residual min=-0.004152 max=0.004473 Jy/beam
! Clean residual mean=0.000005 rms=0.001145 Jy/beam
! Combined flux in latest and established models = 0.930429 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 128 components and 0.930429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068517Jy  sigma=1.051849
! Fit after  self-cal, rms=0.068514Jy  sigma=1.051753
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102172 Jy
! Component: 100  -  total flux cleaned = -0.000196495 Jy
! Component: 150  -  total flux cleaned = -0.00022089 Jy
! Component: 200  -  total flux cleaned = -0.000220469 Jy
! Total flux subtracted in 200 components = -0.000220469 Jy
! Clean residual min=-0.004056 max=0.004528 Jy/beam
! Clean residual mean=0.000006 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.930209 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 132 components and 0.930209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068526Jy  sigma=1.052029
! Fit after  self-cal, rms=0.068523Jy  sigma=1.051996
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.466 mas, bmaj=7.722 mas, bpa=0.6553 degrees
! Estimated noise=0.928777 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.466 x 7.722 at 0.6553 degrees (North through East)
! Clean map  min=-0.0032674  max=0.84237 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068523Jy  sigma=1.051996
! Fit after  self-cal, rms=0.063765Jy  sigma=0.964672
! Inverting map and beam 
! Estimated beam: bmin=3.467 mas, bmaj=7.721 mas, bpa=0.662 degrees
! Estimated noise=0.926934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000721522 Jy
! Component: 100  -  total flux cleaned = -0.000665195 Jy
! Component: 150  -  total flux cleaned = -0.000714082 Jy
! Component: 200  -  total flux cleaned = -0.000669347 Jy
! Total flux subtracted in 200 components = -0.000669347 Jy
! Clean residual min=-0.003706 max=0.003917 Jy/beam
! Clean residual mean=0.000003 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.929539 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 145 components and 0.92954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063665Jy  sigma=0.963493
! Fit after  self-cal, rms=0.063662Jy  sigma=0.963455
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000139475 Jy
! Component: 100  -  total flux cleaned = -0.000178799 Jy
! Component: 150  -  total flux cleaned = -0.000179008 Jy
! Component: 200  -  total flux cleaned = -0.000144585 Jy
! Total flux subtracted in 200 components = -0.000144585 Jy
! Clean residual min=-0.003632 max=0.003908 Jy/beam
! Clean residual mean=0.000003 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.929395 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 154 components and 0.929395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063619Jy  sigma=0.962887
! Fit after  self-cal, rms=0.063615Jy  sigma=0.962864
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063615Jy  sigma=0.962864
! Fit after  self-cal, rms=0.063527Jy  sigma=0.962485
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.946 mas, bmaj=6.951 mas, bpa=0.9285 degrees
! Estimated noise=1.11893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.65095 Jy
! Component: 100  -  total flux cleaned = 0.796237 Jy
! Component: 150  -  total flux cleaned = 0.843432 Jy
! Component: 200  -  total flux cleaned = 0.866295 Jy
! Total flux subtracted in 200 components = 0.866295 Jy
! Clean residual min=-0.006834 max=0.011851 Jy/beam
! Clean residual mean=0.000028 rms=0.001970 Jy/beam
! Combined flux in latest and established models = 0.866295 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.866295 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=7.723 mas, bpa=0.6755 degrees
! Estimated noise=0.925801 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196134 Jy
! Component: 100  -  total flux cleaned = 0.0319963 Jy
! Component: 150  -  total flux cleaned = 0.0400007 Jy
! Component: 200  -  total flux cleaned = 0.0456586 Jy
! Total flux subtracted in 200 components = 0.0456586 Jy
! Clean residual min=-0.004865 max=0.004814 Jy/beam
! Clean residual mean=0.000011 rms=0.001114 Jy/beam
! Combined flux in latest and established models = 0.911953 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 61 components and 0.911953 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.583 mas, bmaj=11.67 mas, bpa=2.464 degrees
! Estimated noise=1.16189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0063863 Jy
! Component: 100  -  total flux cleaned = 0.0101769 Jy
! Component: 150  -  total flux cleaned = 0.0128125 Jy
! Component: 200  -  total flux cleaned = 0.0141472 Jy
! Total flux subtracted in 200 components = 0.0141472 Jy
! Clean residual min=-0.003937 max=0.003925 Jy/beam
! Clean residual mean=0.000004 rms=0.001211 Jy/beam
! Combined flux in latest and established models = 0.9261 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000957769 Jy
! Component: 100  -  total flux cleaned = 0.00149495 Jy
! Component: 150  -  total flux cleaned = 0.0018308 Jy
! Component: 200  -  total flux cleaned = 0.00202018 Jy
! Total flux subtracted in 200 components = 0.00202018 Jy
! Clean residual min=-0.003903 max=0.004109 Jy/beam
! Clean residual mean=0.000002 rms=0.001186 Jy/beam
! Combined flux in latest and established models = 0.92812 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 98 components and 0.92812 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.469 mas, bmaj=7.723 mas, bpa=0.6755 degrees
! Estimated noise=0.925801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000799617 Jy
! Component: 100  -  total flux cleaned = 0.0009561 Jy
! Component: 150  -  total flux cleaned = 0.00109267 Jy
! Component: 200  -  total flux cleaned = 0.00121896 Jy
! Total flux subtracted in 200 components = 0.00121896 Jy
! Clean residual min=-0.003952 max=0.003807 Jy/beam
! Clean residual mean=0.000001 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.929339 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 0.929339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063668Jy  sigma=0.965447
! Fit after  self-cal, rms=0.063626Jy  sigma=0.964963
wmodel /J0825+0309_S_map.mod
! wmodel: Unable to open new model file: /J0825+0309_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0825+0309_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.469 x 7.723 at 0.6755 degrees (North through East)
! Clean map  min=-0.0039685  max=0.83889 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0825+0309_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.838893 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000952254 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.34054 0.34054 0.681079 1.36216 2.72432 5.44863 10.8973 21.7945 43.5891 87.1781
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0028 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.838 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  880.954 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0825+0309_S_dfm.log closed on Thu May 19 18:30:27 2016