! Started logfile: /scr/pima/bg219e_uvs/J0824-2428_X_dfm.log on Thu May 19 18:30:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0824-2428_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0824-2428_X_uva.fits
! AN table 1: 56 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.860119 visibilities/baseline/integration-bin.
! Found source: J0824-2428
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20808 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0824-2428_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011445Jy  sigma=20.923517
! Fit after  self-cal, rms=0.872729Jy  sigma=17.987538
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7597 mas, bmaj=3.482 mas, bpa=17.36 degrees
! Estimated noise=0.503209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0931591 Jy
! Component: 100  -  total flux cleaned = 0.118567 Jy
! Total flux subtracted in 100 components = 0.118567 Jy
! Clean residual min=-0.005388 max=0.011983 Jy/beam
! Clean residual mean=-0.000017 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 0.118567 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.118567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076831Jy  sigma=1.500825
! Fit after  self-cal, rms=0.076732Jy  sigma=1.499263
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142269 Jy
! Component: 100  -  total flux cleaned = 0.0228234 Jy
! Total flux subtracted in 100 components = 0.0228234 Jy
! Clean residual min=-0.003723 max=0.005334 Jy/beam
! Clean residual mean=-0.000013 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.14139 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.14139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072185Jy  sigma=1.384127
! Fit after  self-cal, rms=0.072145Jy  sigma=1.383524
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=3.954 mas, bpa=15.39 degrees
! Estimated noise=0.24388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112361 Jy
! Component: 100  -  total flux cleaned = 0.0170831 Jy
! Component: 150  -  total flux cleaned = 0.0204743 Jy
! Component: 200  -  total flux cleaned = 0.0225939 Jy
! Total flux subtracted in 200 components = 0.0225939 Jy
! Clean residual min=-0.001938 max=0.003918 Jy/beam
! Clean residual mean=-0.000009 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.163984 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 70 components and 0.163984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070623Jy  sigma=1.342589
! Fit after  self-cal, rms=0.070611Jy  sigma=1.342234
! Inverting map 
! Added new window around map position (2, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312197 Jy
! Component: 100  -  total flux cleaned = 0.00409628 Jy
! Component: 150  -  total flux cleaned = 0.0046715 Jy
! Component: 200  -  total flux cleaned = 0.00502545 Jy
! Total flux subtracted in 200 components = 0.00502545 Jy
! Clean residual min=-0.001684 max=0.002370 Jy/beam
! Clean residual mean=-0.000006 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.169009 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 92 components and 0.169009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070464Jy  sigma=1.339115
! Fit after  self-cal, rms=0.070452Jy  sigma=1.338700
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.01 x 3.954 at 15.39 degrees (North through East)
! Clean map  min=-0.0016819  max=0.13009 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.07     KP        1.03     
!   LA        0.99     NL        1.05     OV        0.97     PT        0.98     
!   SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.02     KP        1.02     
!   LA        1.00     NL        1.06     OV        1.01     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.04     KP        0.99     
!   LA        0.96     NL        1.01     OV        1.03     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.07     KP        0.98     
!   LA        0.97     NL        1.04     OV        1.02     PT        1.01     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.09     KP        1.01     
!   LA        0.97     NL        0.99     OV        1.02     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.04     KP        0.98     
!   LA        0.99     NL        1.00     OV        1.02     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.98     KP        1.00     
!   LA        0.99     NL        1.04     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        1.01     
!   LA        0.98     NL        1.04     OV        0.99     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.01     KP        0.98     
!   LA        1.00     NL        1.02     OV        0.99     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        1.01     NL        1.00     OV        1.00     PT        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.95     NL        1.03     OV        0.97     PT        1.03     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.04     KP        0.99     
!   LA        1.00     NL        1.04     OV        0.99     PT        0.98     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.070452Jy  sigma=1.338700
! Fit after  self-cal, rms=0.071160Jy  sigma=1.334966
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=3.98 mas, bpa=15.49 degrees
! Estimated noise=0.24496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000483155 Jy
! Component: 100  -  total flux cleaned = -0.00068517 Jy
! Component: 150  -  total flux cleaned = -0.000742803 Jy
! Component: 200  -  total flux cleaned = -0.000742433 Jy
! Total flux subtracted in 200 components = -0.000742433 Jy
! Clean residual min=-0.001711 max=0.001693 Jy/beam
! Clean residual mean=-0.000002 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.168267 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 120 components and 0.168267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071127Jy  sigma=1.334434
! Fit after  self-cal, rms=0.071144Jy  sigma=1.334363
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071144Jy  sigma=1.334363
! Fit after  self-cal, rms=0.071269Jy  sigma=1.332720
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=3.982 mas, bpa=15.48 degrees
! Estimated noise=0.244872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000336442 Jy
! Component: 100  -  total flux cleaned = -0.00029112 Jy
! Component: 150  -  total flux cleaned = -0.000271216 Jy
! Component: 200  -  total flux cleaned = -0.000234915 Jy
! Total flux subtracted in 200 components = -0.000234915 Jy
! Clean residual min=-0.001616 max=0.001408 Jy/beam
! Clean residual mean=-0.000002 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.168032 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 128 components and 0.168032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071255Jy  sigma=1.332496
! Fit after  self-cal, rms=0.071260Jy  sigma=1.332481
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.15887e-05 Jy
! Component: 100  -  total flux cleaned = 0.000119001 Jy
! Component: 150  -  total flux cleaned = 0.000163292 Jy
! Component: 200  -  total flux cleaned = 0.000190758 Jy
! Total flux subtracted in 200 components = 0.000190758 Jy
! Clean residual min=-0.001614 max=0.001403 Jy/beam
! Clean residual mean=-0.000002 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.168223 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 137 components and 0.168223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071253Jy  sigma=1.332377
! Fit after  self-cal, rms=0.071254Jy  sigma=1.332369
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071254Jy  sigma=1.332369
! Fit after  self-cal, rms=0.071574Jy  sigma=1.331094
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=3.979 mas, bpa=15.46 degrees
! Estimated noise=0.244693 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110664 Jy
! Component: 100  -  total flux cleaned = -0.000159518 Jy
! Component: 150  -  total flux cleaned = -0.000201037 Jy
! Component: 200  -  total flux cleaned = -0.000188701 Jy
! Total flux subtracted in 200 components = -0.000188701 Jy
! Clean residual min=-0.001469 max=0.001290 Jy/beam
! Clean residual mean=-0.000002 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.168034 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 149 components and 0.168034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071566Jy  sigma=1.330995
! Fit after  self-cal, rms=0.071578Jy  sigma=1.330967
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.64355e-05 Jy
! Component: 100  -  total flux cleaned = 2.53627e-05 Jy
! Component: 150  -  total flux cleaned = 2.49287e-05 Jy
! Component: 200  -  total flux cleaned = 2.47455e-05 Jy
! Total flux subtracted in 200 components = 2.47455e-05 Jy
! Clean residual min=-0.001468 max=0.001294 Jy/beam
! Clean residual mean=-0.000002 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.168059 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 155 components and 0.168059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071575Jy  sigma=1.330924
! Fit after  self-cal, rms=0.071575Jy  sigma=1.330920
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071575Jy  sigma=1.330920
! Fit after  self-cal, rms=0.071763Jy  sigma=1.330896
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.303 mas, bmaj=5.614 mas, bpa=4.194 degrees
! Estimated noise=0.282359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.29381e-05 Jy
! Component: 100  -  total flux cleaned = 3.85838e-05 Jy
! Component: 150  -  total flux cleaned = 5.20641e-05 Jy
! Component: 200  -  total flux cleaned = 5.82049e-05 Jy
! Total flux subtracted in 200 components = 5.82049e-05 Jy
! Clean residual min=-0.001393 max=0.001187 Jy/beam
! Clean residual mean=-0.000002 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.168117 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 167 components and 0.168117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071763Jy  sigma=1.330894
! Fit after  self-cal, rms=0.071765Jy  sigma=1.330889
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.56298e-05 Jy
! Component: 100  -  total flux cleaned = 4.11027e-05 Jy
! Component: 150  -  total flux cleaned = 4.60405e-05 Jy
! Component: 200  -  total flux cleaned = 4.14845e-05 Jy
! Total flux subtracted in 200 components = 4.14845e-05 Jy
! Clean residual min=-0.001378 max=0.001175 Jy/beam
! Clean residual mean=-0.000002 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.168159 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 172 components and 0.168159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071765Jy  sigma=1.330894
! Fit after  self-cal, rms=0.071765Jy  sigma=1.330891
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=3.984 mas, bpa=15.48 degrees
! Estimated noise=0.244774 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.01 x 3.984 at 15.48 degrees (North through East)
! Clean map  min=-0.0013217  max=0.13001 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7565 mas, bmaj=3.507 mas, bpa=17.41 degrees
! Estimated noise=0.508928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0941052 Jy
! Component: 100  -  total flux cleaned = 0.120293 Jy
! Component: 150  -  total flux cleaned = 0.134826 Jy
! Component: 200  -  total flux cleaned = 0.143487 Jy
! Total flux subtracted in 200 components = 0.143487 Jy
! Clean residual min=-0.003283 max=0.004528 Jy/beam
! Clean residual mean=-0.000011 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.143487 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.143487 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=3.984 mas, bpa=15.48 degrees
! Estimated noise=0.244774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00989215 Jy
! Component: 100  -  total flux cleaned = 0.0151004 Jy
! Component: 150  -  total flux cleaned = 0.0181019 Jy
! Component: 200  -  total flux cleaned = 0.0199888 Jy
! Total flux subtracted in 200 components = 0.0199888 Jy
! Clean residual min=-0.001501 max=0.001320 Jy/beam
! Clean residual mean=-0.000004 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.163476 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 60 components and 0.163476 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.303 mas, bmaj=5.614 mas, bpa=4.194 degrees
! Estimated noise=0.282359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170547 Jy
! Component: 100  -  total flux cleaned = 0.00267377 Jy
! Component: 150  -  total flux cleaned = 0.00303288 Jy
! Component: 200  -  total flux cleaned = 0.00328073 Jy
! Total flux subtracted in 200 components = 0.00328073 Jy
! Clean residual min=-0.001429 max=0.001228 Jy/beam
! Clean residual mean=-0.000003 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.166757 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179856 Jy
! Component: 100  -  total flux cleaned = 0.000336814 Jy
! Component: 150  -  total flux cleaned = 0.000464391 Jy
! Component: 200  -  total flux cleaned = 0.00051986 Jy
! Total flux subtracted in 200 components = 0.00051986 Jy
! Clean residual min=-0.001399 max=0.001252 Jy/beam
! Clean residual mean=-0.000003 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.167277 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 107 components and 0.167277 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=3.984 mas, bpa=15.48 degrees
! Estimated noise=0.244774 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.49628e-05 Jy
! Component: 100  -  total flux cleaned = -0.000117949 Jy
! Component: 150  -  total flux cleaned = -0.000136855 Jy
! Component: 200  -  total flux cleaned = -0.000120135 Jy
! Total flux subtracted in 200 components = -0.000120135 Jy
! Clean residual min=-0.001378 max=0.001276 Jy/beam
! Clean residual mean=-0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.167157 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.167157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071775Jy  sigma=1.331105
! Fit after  self-cal, rms=0.071769Jy  sigma=1.331082
wmodel /J0824-2428_X_map.mod
! wmodel: Unable to open new model file: /J0824-2428_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0824-2428_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.01 x 3.984 at 15.48 degrees (North through East)
! Clean map  min=-0.0012844  max=0.13081 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0824-2428_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.130806 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000325655 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.74688 0.74688 1.49376 2.98752 5.97504 11.9501 23.9002 47.8003 95.6007
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.13 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  401.67 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0824-2428_X_dfm.log closed on Thu May 19 18:30:23 2016