! Started logfile: /scr/pima/bg219e_uvs/J0824-1827_S_uvs.log on Thu Apr  7 06:39:37 2016
obs /scr/pima/bg219e_uvs/J0824-1827_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0824-1827_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.90873 visibilities/baseline/integration-bin.
! Found source: J0824-1827
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5496 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0824-1827_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.052456Jy  sigma=17.607391
! Fit after  self-cal, rms=0.711519Jy  sigma=11.893147
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.182 mas, bmaj=11.88 mas, bpa=17.8 degrees
! Estimated noise=0.840973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.219752 Jy
! Component: 100  -  total flux cleaned = 0.278375 Jy
! Total flux subtracted in 100 components = 0.278375 Jy
! Clean residual min=-0.009663 max=0.026520 Jy/beam
! Clean residual mean=-0.000006 rms=0.003365 Jy/beam
! Combined flux in latest and established models = 0.278375 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.278375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097378Jy  sigma=1.603105
! Fit after  self-cal, rms=0.097307Jy  sigma=1.602203
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0298919 Jy
! Component: 100  -  total flux cleaned = 0.0474711 Jy
! Total flux subtracted in 100 components = 0.0474711 Jy
! Clean residual min=-0.006035 max=0.009001 Jy/beam
! Clean residual mean=-0.000011 rms=0.001695 Jy/beam
! Combined flux in latest and established models = 0.325847 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 31 components and 0.325846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085618Jy  sigma=1.371729
! Fit after  self-cal, rms=0.085550Jy  sigma=1.370835
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.022 mas, bmaj=12.6 mas, bpa=15.34 degrees
! Estimated noise=0.597032 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141306 Jy
! Component: 100  -  total flux cleaned = 0.021455 Jy
! Component: 150  -  total flux cleaned = 0.025722 Jy
! Component: 200  -  total flux cleaned = 0.0282741 Jy
! Total flux subtracted in 200 components = 0.0282741 Jy
! Clean residual min=-0.004254 max=0.004697 Jy/beam
! Clean residual mean=-0.000017 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.354121 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 55 components and 0.354121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083456Jy  sigma=1.328692
! Fit after  self-cal, rms=0.083429Jy  sigma=1.328207
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.022 x 12.6 at 15.34 degrees (North through East)
! Clean map  min=-0.0040749  max=0.29263 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        0.99     
!   LA        0.99     NL        0.98     OV        1.00     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.07     KP        1.00     
!   LA        0.99     NL        0.98     OV        0.98     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.02     KP        0.98     
!   LA        0.99     NL        0.95     OV        0.97     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.03     HN        1.10     KP        1.02     
!   LA        0.99     NL        0.99     OV        0.98     PT        0.95     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.083429Jy  sigma=1.328207
! Fit after  self-cal, rms=0.083426Jy  sigma=1.314143
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.035 mas, bmaj=12.68 mas, bpa=15.47 degrees
! Estimated noise=0.598082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118357 Jy
! Component: 100  -  total flux cleaned = -0.00122904 Jy
! Component: 150  -  total flux cleaned = -0.00122732 Jy
! Component: 200  -  total flux cleaned = -0.00112343 Jy
! Total flux subtracted in 200 components = -0.00112343 Jy
! Clean residual min=-0.003602 max=0.003294 Jy/beam
! Clean residual mean=-0.000004 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.352997 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 0.352997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083377Jy  sigma=1.313296
! Fit after  self-cal, rms=0.083409Jy  sigma=1.313179
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083409Jy  sigma=1.313179
! Fit after  self-cal, rms=0.083204Jy  sigma=1.306128
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.039 mas, bmaj=12.68 mas, bpa=15.44 degrees
! Estimated noise=0.598217 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000693428 Jy
! Component: 100  -  total flux cleaned = -0.000662867 Jy
! Component: 150  -  total flux cleaned = -0.000607699 Jy
! Component: 200  -  total flux cleaned = -0.000582162 Jy
! Total flux subtracted in 200 components = -0.000582162 Jy
! Clean residual min=-0.003420 max=0.002941 Jy/beam
! Clean residual mean=-0.000003 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.352415 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 76 components and 0.352415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083182Jy  sigma=1.305788
! Fit after  self-cal, rms=0.083185Jy  sigma=1.305748
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.39134e-07 Jy
! Component: 100  -  total flux cleaned = -5.1187e-07 Jy
! Component: 150  -  total flux cleaned = -8.779e-07 Jy
! Component: 200  -  total flux cleaned = -3.86689e-07 Jy
! Total flux subtracted in 200 components = -3.86689e-07 Jy
! Clean residual min=-0.003390 max=0.002906 Jy/beam
! Clean residual mean=-0.000003 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.352415 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 76 components and 0.352415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083173Jy  sigma=1.305583
! Fit after  self-cal, rms=0.083173Jy  sigma=1.305572
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083173Jy  sigma=1.305572
! Fit after  self-cal, rms=0.083276Jy  sigma=1.304991
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.04 mas, bmaj=12.69 mas, bpa=15.44 degrees
! Estimated noise=0.598382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000270997 Jy
! Component: 100  -  total flux cleaned = -0.000230999 Jy
! Component: 150  -  total flux cleaned = -0.000196305 Jy
! Component: 200  -  total flux cleaned = -0.000180666 Jy
! Total flux subtracted in 200 components = -0.000180666 Jy
! Clean residual min=-0.003294 max=0.002782 Jy/beam
! Clean residual mean=-0.000002 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.352234 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 82 components and 0.352234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083266Jy  sigma=1.304834
! Fit after  self-cal, rms=0.083269Jy  sigma=1.304821
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.12819e-06 Jy
! Component: 100  -  total flux cleaned = 6.4105e-06 Jy
! Component: 150  -  total flux cleaned = 5.87302e-06 Jy
! Component: 200  -  total flux cleaned = 5.60659e-06 Jy
! Total flux subtracted in 200 components = 5.60659e-06 Jy
! Clean residual min=-0.003277 max=0.002744 Jy/beam
! Clean residual mean=-0.000002 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.35224 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 87 components and 0.35224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083263Jy  sigma=1.304752
! Fit after  self-cal, rms=0.083263Jy  sigma=1.304744
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083263Jy  sigma=1.304744
! Fit after  self-cal, rms=0.083348Jy  sigma=1.304716
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.841 mas, bmaj=17.32 mas, bpa=6.249 degrees
! Estimated noise=0.679759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254048 Jy
! Component: 100  -  total flux cleaned = -0.000254268 Jy
! Component: 150  -  total flux cleaned = -0.000283213 Jy
! Component: 200  -  total flux cleaned = -0.000282938 Jy
! Total flux subtracted in 200 components = -0.000282938 Jy
! Clean residual min=-0.003251 max=0.002929 Jy/beam
! Clean residual mean=-0.000005 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.351957 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 97 components and 0.351957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083347Jy  sigma=1.304687
! Fit after  self-cal, rms=0.083346Jy  sigma=1.304659
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.44767e-05 Jy
! Component: 100  -  total flux cleaned = -7.31763e-07 Jy
! Component: 150  -  total flux cleaned = -3.23012e-07 Jy
! Component: 200  -  total flux cleaned = -8.56233e-06 Jy
! Total flux subtracted in 200 components = -8.56233e-06 Jy
! Clean residual min=-0.003277 max=0.002931 Jy/beam
! Clean residual mean=-0.000005 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.351948 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 103 components and 0.351948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083348Jy  sigma=1.304691
! Fit after  self-cal, rms=0.083346Jy  sigma=1.304679
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.041 mas, bmaj=12.69 mas, bpa=15.45 degrees
! Estimated noise=0.598676 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.041 x 12.69 at 15.45 degrees (North through East)
! Clean map  min=-0.0031684  max=0.29354 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.185 mas, bmaj=11.98 mas, bpa=17.91 degrees
! Estimated noise=0.84567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.220784 Jy
! Component: 100  -  total flux cleaned = 0.279054 Jy
! Component: 150  -  total flux cleaned = 0.308252 Jy
! Component: 200  -  total flux cleaned = 0.325042 Jy
! Total flux subtracted in 200 components = 0.325042 Jy
! Clean residual min=-0.005002 max=0.008537 Jy/beam
! Clean residual mean=0.000001 rms=0.001412 Jy/beam
! Combined flux in latest and established models = 0.325042 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.325042 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.041 mas, bmaj=12.69 mas, bpa=15.45 degrees
! Estimated noise=0.598676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130164 Jy
! Component: 100  -  total flux cleaned = 0.0196296 Jy
! Component: 150  -  total flux cleaned = 0.0233973 Jy
! Component: 200  -  total flux cleaned = 0.0256899 Jy
! Total flux subtracted in 200 components = 0.0256899 Jy
! Clean residual min=-0.003444 max=0.002839 Jy/beam
! Clean residual mean=-0.000003 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.350732 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 43 components and 0.350732 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.841 mas, bmaj=17.32 mas, bpa=6.249 degrees
! Estimated noise=0.679759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012561 Jy
! Component: 100  -  total flux cleaned = 0.00142655 Jy
! Component: 150  -  total flux cleaned = 0.00149146 Jy
! Component: 200  -  total flux cleaned = 0.00152857 Jy
! Total flux subtracted in 200 components = 0.00152857 Jy
! Clean residual min=-0.003281 max=0.002924 Jy/beam
! Clean residual mean=-0.000005 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.35226 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.09491e-05 Jy
! Component: 100  -  total flux cleaned = 4.48243e-05 Jy
! Component: 150  -  total flux cleaned = 4.48007e-05 Jy
! Component: 200  -  total flux cleaned = 3.42147e-05 Jy
! Total flux subtracted in 200 components = 3.42147e-05 Jy
! Clean residual min=-0.003271 max=0.002941 Jy/beam
! Clean residual mean=-0.000005 rms=0.000895 Jy/beam
! Combined flux in latest and established models = 0.352295 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 72 components and 0.352295 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.041 mas, bmaj=12.69 mas, bpa=15.45 degrees
! Estimated noise=0.598676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000315404 Jy
! Component: 100  -  total flux cleaned = 0.000475568 Jy
! Component: 150  -  total flux cleaned = 0.000615756 Jy
! Component: 200  -  total flux cleaned = 0.000677831 Jy
! Total flux subtracted in 200 components = 0.000677831 Jy
! Clean residual min=-0.003251 max=0.002871 Jy/beam
! Clean residual mean=-0.000002 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.352972 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 82 components and 0.352973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083390Jy  sigma=1.305403
! Fit after  self-cal, rms=0.083389Jy  sigma=1.305338
wmodel /scr/pima/bg219e_uvs/J0824-1827_S_map.mod
! Writing 82 model components to file: /scr/pima/bg219e_uvs/J0824-1827_S_map.mod
wobs /scr/pima/bg219e_uvs/J0824-1827_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0824-1827_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J0824-1827_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219e_uvs/J0824-1827_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00069152 Jy
! Component: 100  -  total flux cleaned = -0.00124963 Jy
! Component: 150  -  total flux cleaned = -0.00176993 Jy
! Component: 200  -  total flux cleaned = -0.00208459 Jy
! Component: 250  -  total flux cleaned = -0.00238647 Jy
! Component: 300  -  total flux cleaned = -0.00263603 Jy
! Component: 350  -  total flux cleaned = -0.00283627 Jy
! Component: 400  -  total flux cleaned = -0.00291318 Jy
! Component: 450  -  total flux cleaned = -0.00302537 Jy
! Component: 500  -  total flux cleaned = -0.00309745 Jy
! Component: 550  -  total flux cleaned = -0.00313263 Jy
! Component: 600  -  total flux cleaned = -0.00306308 Jy
! Component: 650  -  total flux cleaned = -0.00296148 Jy
! Component: 700  -  total flux cleaned = -0.00272986 Jy
! Component: 750  -  total flux cleaned = -0.00256875 Jy
! Component: 800  -  total flux cleaned = -0.00247352 Jy
! Component: 850  -  total flux cleaned = -0.00222432 Jy
! Component: 900  -  total flux cleaned = -0.00213266 Jy
! Component: 950  -  total flux cleaned = -0.00201266 Jy
! Component: 1000  -  total flux cleaned = -0.00192425 Jy
! Component: 1050  -  total flux cleaned = -0.0018078 Jy
! Component: 1100  -  total flux cleaned = -0.00175068 Jy
! Component: 1150  -  total flux cleaned = -0.00166517 Jy
! Component: 1200  -  total flux cleaned = -0.00149737 Jy
! Component: 1250  -  total flux cleaned = -0.00135942 Jy
! Component: 1300  -  total flux cleaned = -0.00114278 Jy
! Component: 1350  -  total flux cleaned = -0.00106268 Jy
! Component: 1400  -  total flux cleaned = -0.00093072 Jy
! Component: 1450  -  total flux cleaned = -0.000800544 Jy
! Component: 1500  -  total flux cleaned = -0.000620758 Jy
! Component: 1550  -  total flux cleaned = -0.000595163 Jy
! Component: 1600  -  total flux cleaned = -0.000369612 Jy
! Component: 1650  -  total flux cleaned = -0.000419019 Jy
! Component: 1700  -  total flux cleaned = -0.000296363 Jy
! Component: 1750  -  total flux cleaned = -0.000247925 Jy
! Component: 1800  -  total flux cleaned = -0.000223837 Jy
! Component: 1850  -  total flux cleaned = -0.000152962 Jy
! Component: 1900  -  total flux cleaned = -0.000176183 Jy
! Component: 1950  -  total flux cleaned = -0.000129523 Jy
! Component: 2000  -  total flux cleaned = -0.000106452 Jy
! Component: 2050  -  total flux cleaned = -8.3524e-05 Jy
! Component: 2100  -  total flux cleaned = -8.36524e-05 Jy
! Component: 2150  -  total flux cleaned = -1.76858e-05 Jy
! Component: 2200  -  total flux cleaned = -3.96932e-05 Jy
! Component: 2250  -  total flux cleaned = 3.5755e-06 Jy
! Component: 2300  -  total flux cleaned = -1.78676e-05 Jy
! Component: 2350  -  total flux cleaned = 6.70734e-05 Jy
! Component: 2400  -  total flux cleaned = 6.69399e-05 Jy
! Component: 2450  -  total flux cleaned = 6.69976e-05 Jy
! Component: 2500  -  total flux cleaned = 0.000190877 Jy
! Component: 2550  -  total flux cleaned = 0.000149803 Jy
! Component: 2600  -  total flux cleaned = 0.000149762 Jy
! Component: 2650  -  total flux cleaned = 0.000169878 Jy
! Component: 2700  -  total flux cleaned = 0.000110136 Jy
! Component: 2750  -  total flux cleaned = 3.0848e-05 Jy
! Component: 2800  -  total flux cleaned = 1.12593e-05 Jy
! Component: 2850  -  total flux cleaned = -4.71659e-05 Jy
! Component: 2900  -  total flux cleaned = -0.000105049 Jy
! Component: 2950  -  total flux cleaned = -0.000143353 Jy
! Component: 3000  -  total flux cleaned = -0.000181182 Jy
! Component: 3050  -  total flux cleaned = -0.000218851 Jy
! Component: 3100  -  total flux cleaned = -0.000237646 Jy
! Component: 3150  -  total flux cleaned = -0.000200605 Jy
! Component: 3200  -  total flux cleaned = -0.000366894 Jy
! Component: 3250  -  total flux cleaned = -0.000385344 Jy
! Component: 3300  -  total flux cleaned = -0.000367083 Jy
! Component: 3350  -  total flux cleaned = -0.000457627 Jy
! Component: 3400  -  total flux cleaned = -0.00045764 Jy
! Component: 3450  -  total flux cleaned = -0.000528982 Jy
! Component: 3500  -  total flux cleaned = -0.000546839 Jy
! Component: 3550  -  total flux cleaned = -0.000617246 Jy
! Component: 3600  -  total flux cleaned = -0.000652312 Jy
! Component: 3650  -  total flux cleaned = -0.00079135 Jy
! Component: 3700  -  total flux cleaned = -0.00082596 Jy
! Component: 3750  -  total flux cleaned = -0.000894711 Jy
! Component: 3800  -  total flux cleaned = -0.000945962 Jy
! Component: 3850  -  total flux cleaned = -0.00101373 Jy
! Component: 3900  -  total flux cleaned = -0.00109804 Jy
! Component: 3950  -  total flux cleaned = -0.00118165 Jy
! Component: 4000  -  total flux cleaned = -0.00119824 Jy
! Component: 4050  -  total flux cleaned = -0.00123129 Jy
! Total flux subtracted in 4096 components = -0.00124771 Jy
! Clean residual min=-0.001086 max=0.001159 Jy/beam
! Clean residual mean=-0.000002 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.351725 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 394 components and 0.351725 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0824-1827_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.041 x 12.69 at 15.45 degrees (North through East)
! Clean map  min=-0.0022307  max=0.29386 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0824-1827_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.293859 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000318841 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.325505 0.325505 0.651009 1.30202 2.60404 5.20807 10.4161 20.8323 41.6646 83.3292
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.293 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  921.645 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0824-1827_S_uvs.log closed on Thu Apr  7 06:39:40 2016