! Started logfile: /scr/pima/bg219e_uvs/J0823-0939_X_uvs.log on Thu Apr  7 09:03:07 2016
obs /scr/pima/bg219e_uvs/J0823-0939_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0823-0939_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.747177 visibilities/baseline/integration-bin.
! Found source: J0823-0939
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24612 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0823-0939_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.006210Jy  sigma=22.804911
! Fit after  self-cal, rms=0.931525Jy  sigma=21.095273
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8586 mas, bmaj=2.05 mas, bpa=8.414 degrees
! Estimated noise=0.45693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.047814 Jy
! Component: 100  -  total flux cleaned = 0.0658155 Jy
! Total flux subtracted in 100 components = 0.0658155 Jy
! Clean residual min=-0.005168 max=0.008648 Jy/beam
! Clean residual mean=0.000009 rms=0.001546 Jy/beam
! Combined flux in latest and established models = 0.0658155 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0658155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070505Jy  sigma=1.527117
! Fit after  self-cal, rms=0.069340Jy  sigma=1.503766
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110331 Jy
! Component: 100  -  total flux cleaned = 0.0180218 Jy
! Total flux subtracted in 100 components = 0.0180218 Jy
! Clean residual min=-0.003906 max=0.007574 Jy/beam
! Clean residual mean=0.000012 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.0838373 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.0838373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066420Jy  sigma=1.428420
! Fit after  self-cal, rms=0.066359Jy  sigma=1.427015
! Inverting map 
! Added new window around map position (-1.6, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00754257 Jy
! Component: 100  -  total flux cleaned = 0.0125057 Jy
! Total flux subtracted in 100 components = 0.0125057 Jy
! Clean residual min=-0.003292 max=0.005007 Jy/beam
! Clean residual mean=0.000012 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.096343 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.096343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065147Jy  sigma=1.394895
! Fit after  self-cal, rms=0.065077Jy  sigma=1.393039
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=2.44 mas, bpa=8.069 degrees
! Estimated noise=0.27858 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00703463 Jy
! Component: 100  -  total flux cleaned = 0.011771 Jy
! Component: 150  -  total flux cleaned = 0.0150703 Jy
! Component: 200  -  total flux cleaned = 0.0174299 Jy
! Total flux subtracted in 200 components = 0.0174299 Jy
! Clean residual min=-0.002990 max=0.005536 Jy/beam
! Clean residual mean=0.000018 rms=0.001013 Jy/beam
! Combined flux in latest and established models = 0.113773 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 69 components and 0.113773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064243Jy  sigma=1.369478
! Fit after  self-cal, rms=0.064231Jy  sigma=1.368452
! Inverting map 
! Added new window around map position (-1.6, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00544444 Jy
! Component: 100  -  total flux cleaned = 0.00853957 Jy
! Component: 150  -  total flux cleaned = 0.010733 Jy
! Component: 200  -  total flux cleaned = 0.011972 Jy
! Total flux subtracted in 200 components = 0.011972 Jy
! Clean residual min=-0.002643 max=0.003865 Jy/beam
! Clean residual mean=0.000015 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.125745 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 106 components and 0.125745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063740Jy  sigma=1.356204
! Fit after  self-cal, rms=0.063648Jy  sigma=1.354421
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.054 x 2.44 at 8.069 degrees (North through East)
! Clean map  min=-0.0024025  max=0.063952 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.10     HN        1.05     KP        0.95     
!   LA        0.94     MK        0.90     NL        1.07     OV        1.08     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.10     HN        0.99     KP        0.96     
!   LA        0.95     MK        1.06     NL        1.11     OV        1.01     
!   PT        0.95     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.06     HN        0.98     KP        0.97     
!   LA        0.94     MK        1.01     NL        0.98     OV        1.02     
!   PT        0.92     SC        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        1.00     KP        0.95     
!   LA        0.96     MK        1.07     NL        1.08     OV        1.06     
!   PT        0.93     SC        0.85     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.12     HN        0.99     KP        0.98     
!   LA        0.98     MK        1.05     NL        1.06     OV        1.07     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.95     KP        0.98     
!   LA        0.95     MK        1.16     NL        1.08     OV        1.06     
!   PT        1.03     SC        0.91     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        1.02     KP        1.04     
!   LA        0.92     MK        1.00     NL        1.07     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063648Jy  sigma=1.354421
! Fit after  self-cal, rms=0.063814Jy  sigma=1.346826
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.044 mas, bmaj=2.434 mas, bpa=8.766 degrees
! Estimated noise=0.277679 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12, 13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238502 Jy
! Component: 100  -  total flux cleaned = 0.00282038 Jy
! Component: 150  -  total flux cleaned = 0.00296823 Jy
! Component: 200  -  total flux cleaned = 0.0028843 Jy
! Total flux subtracted in 200 components = 0.0028843 Jy
! Clean residual min=-0.002072 max=0.002396 Jy/beam
! Clean residual mean=0.000006 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.128629 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 124 components and 0.128629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063674Jy  sigma=1.344058
! Fit after  self-cal, rms=0.063685Jy  sigma=1.343262
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063685Jy  sigma=1.343262
! Fit after  self-cal, rms=0.064060Jy  sigma=1.340572
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=2.423 mas, bpa=8.834 degrees
! Estimated noise=0.277274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129622 Jy
! Component: 100  -  total flux cleaned = 0.00167823 Jy
! Component: 150  -  total flux cleaned = 0.00182072 Jy
! Component: 200  -  total flux cleaned = 0.00179087 Jy
! Total flux subtracted in 200 components = 0.00179087 Jy
! Clean residual min=-0.001756 max=0.002018 Jy/beam
! Clean residual mean=0.000006 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.13042 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 140 components and 0.13042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064002Jy  sigma=1.339449
! Fit after  self-cal, rms=0.064013Jy  sigma=1.339169
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-49.2, -29.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164161 Jy
! Component: 100  -  total flux cleaned = 0.00215249 Jy
! Component: 150  -  total flux cleaned = 0.00230699 Jy
! Component: 200  -  total flux cleaned = 0.00236261 Jy
! Total flux subtracted in 200 components = 0.00236261 Jy
! Clean residual min=-0.001731 max=0.001636 Jy/beam
! Clean residual mean=0.000004 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.132783 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 153 components and 0.132783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063960Jy  sigma=1.337945
! Fit after  self-cal, rms=0.063944Jy  sigma=1.337813
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063944Jy  sigma=1.337813
! Fit after  self-cal, rms=0.063649Jy  sigma=1.337604
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=2.414 mas, bpa=8.785 degrees
! Estimated noise=0.276415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000888525 Jy
! Component: 100  -  total flux cleaned = 0.0012626 Jy
! Component: 150  -  total flux cleaned = 0.00153425 Jy
! Component: 200  -  total flux cleaned = 0.00168195 Jy
! Total flux subtracted in 200 components = 0.00168195 Jy
! Clean residual min=-0.001648 max=0.001622 Jy/beam
! Clean residual mean=0.000004 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.134465 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 161 components and 0.134465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063622Jy  sigma=1.337028
! Fit after  self-cal, rms=0.063612Jy  sigma=1.336970
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000413093 Jy
! Component: 100  -  total flux cleaned = 0.000483359 Jy
! Component: 150  -  total flux cleaned = 0.00054796 Jy
! Component: 200  -  total flux cleaned = 0.000568235 Jy
! Total flux subtracted in 200 components = 0.000568235 Jy
! Clean residual min=-0.001603 max=0.001592 Jy/beam
! Clean residual mean=0.000004 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.135033 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 173 components and 0.135033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063596Jy  sigma=1.336655
! Fit after  self-cal, rms=0.063594Jy  sigma=1.336637
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063594Jy  sigma=1.336637
! Fit after  self-cal, rms=0.063386Jy  sigma=1.336548
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.225 mas, bmaj=3.932 mas, bpa=4.084 degrees
! Estimated noise=0.341597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105406 Jy
! Component: 100  -  total flux cleaned = 0.00113899 Jy
! Component: 150  -  total flux cleaned = 0.00113908 Jy
! Component: 200  -  total flux cleaned = 0.00113975 Jy
! Total flux subtracted in 200 components = 0.00113975 Jy
! Clean residual min=-0.001500 max=0.001639 Jy/beam
! Clean residual mean=0.000006 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.136173 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 189 components and 0.136172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063377Jy  sigma=1.336411
! Fit after  self-cal, rms=0.063369Jy  sigma=1.336350
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000198577 Jy
! Component: 100  -  total flux cleaned = 0.000175893 Jy
! Component: 150  -  total flux cleaned = 0.00015511 Jy
! Component: 200  -  total flux cleaned = 0.000136069 Jy
! Total flux subtracted in 200 components = 0.000136069 Jy
! Clean residual min=-0.001431 max=0.001568 Jy/beam
! Clean residual mean=0.000006 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.136309 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 198 components and 0.136309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063366Jy  sigma=1.336290
! Fit after  self-cal, rms=0.063365Jy  sigma=1.336265
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.407 mas, bpa=8.743 degrees
! Estimated noise=0.275779 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.035 x 2.407 at 8.743 degrees (North through East)
! Clean map  min=-0.0014743  max=0.063183 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8491 mas, bmaj=2.041 mas, bpa=9.406 degrees
! Estimated noise=0.451101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0477736 Jy
! Component: 100  -  total flux cleaned = 0.0670734 Jy
! Component: 150  -  total flux cleaned = 0.0792484 Jy
! Component: 200  -  total flux cleaned = 0.0885454 Jy
! Total flux subtracted in 200 components = 0.0885454 Jy
! Clean residual min=-0.003772 max=0.005405 Jy/beam
! Clean residual mean=0.000008 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.0885454 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.0885454 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.407 mas, bpa=8.743 degrees
! Estimated noise=0.275779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112711 Jy
! Component: 100  -  total flux cleaned = 0.019007 Jy
! Component: 150  -  total flux cleaned = 0.0246414 Jy
! Component: 200  -  total flux cleaned = 0.0289612 Jy
! Total flux subtracted in 200 components = 0.0289612 Jy
! Clean residual min=-0.002352 max=0.002781 Jy/beam
! Clean residual mean=0.000009 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.117507 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 91 components and 0.117507 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.225 mas, bmaj=3.932 mas, bpa=4.084 degrees
! Estimated noise=0.341597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00542684 Jy
! Component: 100  -  total flux cleaned = 0.00896411 Jy
! Component: 150  -  total flux cleaned = 0.0115277 Jy
! Component: 200  -  total flux cleaned = 0.0134772 Jy
! Total flux subtracted in 200 components = 0.0134772 Jy
! Clean residual min=-0.002008 max=0.002037 Jy/beam
! Clean residual mean=0.000009 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.130984 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150083 Jy
! Component: 100  -  total flux cleaned = 0.00257931 Jy
! Component: 150  -  total flux cleaned = 0.00296819 Jy
! Component: 200  -  total flux cleaned = 0.00331206 Jy
! Total flux subtracted in 200 components = 0.00331206 Jy
! Clean residual min=-0.001780 max=0.001689 Jy/beam
! Clean residual mean=0.000005 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.134296 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 159 components and 0.134296 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=2.407 mas, bpa=8.743 degrees
! Estimated noise=0.275779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474544 Jy
! Component: 100  -  total flux cleaned = 0.000643705 Jy
! Component: 150  -  total flux cleaned = 0.000859942 Jy
! Component: 200  -  total flux cleaned = 0.0011479 Jy
! Total flux subtracted in 200 components = 0.0011479 Jy
! Clean residual min=-0.001669 max=0.001770 Jy/beam
! Clean residual mean=0.000003 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.135444 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 182 components and 0.135444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063402Jy  sigma=1.337291
! Fit after  self-cal, rms=0.063380Jy  sigma=1.336868
wmodel /scr/pima/bg219e_uvs/J0823-0939_X_map.mod
! Writing 182 model components to file: /scr/pima/bg219e_uvs/J0823-0939_X_map.mod
wobs /scr/pima/bg219e_uvs/J0823-0939_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0823-0939_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0823-0939_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219e_uvs/J0823-0939_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000359144 Jy
! Component: 100  -  total flux cleaned = 0.000685684 Jy
! Component: 150  -  total flux cleaned = 0.000962678 Jy
! Component: 200  -  total flux cleaned = 0.00122463 Jy
! Component: 250  -  total flux cleaned = 0.00138452 Jy
! Component: 300  -  total flux cleaned = 0.00144998 Jy
! Component: 350  -  total flux cleaned = 0.001429 Jy
! Component: 400  -  total flux cleaned = 0.00144945 Jy
! Component: 450  -  total flux cleaned = 0.00148941 Jy
! Component: 500  -  total flux cleaned = 0.00154741 Jy
! Component: 550  -  total flux cleaned = 0.00154764 Jy
! Component: 600  -  total flux cleaned = 0.0016224 Jy
! Component: 650  -  total flux cleaned = 0.00169465 Jy
! Component: 700  -  total flux cleaned = 0.00167705 Jy
! Component: 750  -  total flux cleaned = 0.0017118 Jy
! Component: 800  -  total flux cleaned = 0.00174581 Jy
! Component: 850  -  total flux cleaned = 0.00174572 Jy
! Component: 900  -  total flux cleaned = 0.0017781 Jy
! Component: 950  -  total flux cleaned = 0.00182573 Jy
! Component: 1000  -  total flux cleaned = 0.00185757 Jy
! Component: 1050  -  total flux cleaned = 0.001965 Jy
! Component: 1100  -  total flux cleaned = 0.00207003 Jy
! Component: 1150  -  total flux cleaned = 0.00209931 Jy
! Component: 1200  -  total flux cleaned = 0.00215723 Jy
! Component: 1250  -  total flux cleaned = 0.00224293 Jy
! Component: 1300  -  total flux cleaned = 0.00232679 Jy
! Component: 1350  -  total flux cleaned = 0.00240954 Jy
! Component: 1400  -  total flux cleaned = 0.00247753 Jy
! Component: 1450  -  total flux cleaned = 0.00259815 Jy
! Component: 1500  -  total flux cleaned = 0.00266411 Jy
! Component: 1550  -  total flux cleaned = 0.00275506 Jy
! Component: 1600  -  total flux cleaned = 0.00283197 Jy
! Component: 1650  -  total flux cleaned = 0.00292036 Jy
! Component: 1700  -  total flux cleaned = 0.00298298 Jy
! Component: 1750  -  total flux cleaned = 0.00306928 Jy
! Component: 1800  -  total flux cleaned = 0.00316674 Jy
! Component: 1850  -  total flux cleaned = 0.00323904 Jy
! Component: 1900  -  total flux cleaned = 0.0033219 Jy
! Component: 1950  -  total flux cleaned = 0.00339229 Jy
! Component: 2000  -  total flux cleaned = 0.00343847 Jy
! Component: 2050  -  total flux cleaned = 0.00351854 Jy
! Component: 2100  -  total flux cleaned = 0.00358615 Jy
! Component: 2150  -  total flux cleaned = 0.00364176 Jy
! Component: 2200  -  total flux cleaned = 0.00371878 Jy
! Component: 2250  -  total flux cleaned = 0.00377308 Jy
! Component: 2300  -  total flux cleaned = 0.00386981 Jy
! Component: 2350  -  total flux cleaned = 0.00392314 Jy
! Component: 2400  -  total flux cleaned = 0.00400718 Jy
! Component: 2450  -  total flux cleaned = 0.00405907 Jy
! Component: 2500  -  total flux cleaned = 0.0041002 Jy
! Component: 2550  -  total flux cleaned = 0.00413084 Jy
! Component: 2600  -  total flux cleaned = 0.00417115 Jy
! Component: 2650  -  total flux cleaned = 0.00419134 Jy
! Component: 2700  -  total flux cleaned = 0.00424058 Jy
! Component: 2750  -  total flux cleaned = 0.00428926 Jy
! Component: 2800  -  total flux cleaned = 0.00429894 Jy
! Component: 2850  -  total flux cleaned = 0.00433723 Jy
! Component: 2900  -  total flux cleaned = 0.00439402 Jy
! Component: 2950  -  total flux cleaned = 0.00444083 Jy
! Component: 3000  -  total flux cleaned = 0.00446861 Jy
! Component: 3050  -  total flux cleaned = 0.00452371 Jy
! Component: 3100  -  total flux cleaned = 0.004551 Jy
! Component: 3150  -  total flux cleaned = 0.00461436 Jy
! Component: 3200  -  total flux cleaned = 0.00466796 Jy
! Component: 3250  -  total flux cleaned = 0.00468575 Jy
! Component: 3300  -  total flux cleaned = 0.00475607 Jy
! Component: 3350  -  total flux cleaned = 0.00473871 Jy
! Component: 3400  -  total flux cleaned = 0.00479062 Jy
! Component: 3450  -  total flux cleaned = 0.00480774 Jy
! Component: 3500  -  total flux cleaned = 0.0048332 Jy
! Component: 3550  -  total flux cleaned = 0.00488378 Jy
! Component: 3600  -  total flux cleaned = 0.00492549 Jy
! Component: 3650  -  total flux cleaned = 0.00494209 Jy
! Component: 3700  -  total flux cleaned = 0.00495856 Jy
! Component: 3750  -  total flux cleaned = 0.0049994 Jy
! Component: 3800  -  total flux cleaned = 0.00498329 Jy
! Component: 3850  -  total flux cleaned = 0.00502348 Jy
! Component: 3900  -  total flux cleaned = 0.00506331 Jy
! Component: 3950  -  total flux cleaned = 0.00508698 Jy
! Component: 4000  -  total flux cleaned = 0.0050712 Jy
! Component: 4050  -  total flux cleaned = 0.00508685 Jy
! Total flux subtracted in 4096 components = 0.00509469 Jy
! Clean residual min=-0.000508 max=0.000459 Jy/beam
! Clean residual mean=-0.000000 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.140539 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 461 components and 0.140539 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0823-0939_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.035 x 2.407 at 8.743 degrees (North through East)
! Clean map  min=-0.0010482  max=0.063092 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0823-0939_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0630923 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000136237 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.647796 0.647796 1.29559 2.59118 5.18237 10.3647 20.7295 41.4589 82.9179
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.063 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  463.108 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0823-0939_X_uvs.log closed on Thu Apr  7 09:03:12 2016