! Started logfile: /scr/pima/bg219e_uvs/J0819-0630_X_uvs.log on Thu Apr  7 09:02:57 2016
obs /scr/pima/bg219e_uvs/J0819-0630_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0819-0630_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.77433 visibilities/baseline/integration-bin.
! Found source: J0819-0630
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24252 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0819-0630_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.010194Jy  sigma=23.293774
! Fit after  self-cal, rms=0.912177Jy  sigma=21.023712
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7625 mas, bmaj=1.964 mas, bpa=4.603 degrees
! Estimated noise=0.496601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0665329 Jy
! Component: 100  -  total flux cleaned = 0.0896116 Jy
! Total flux subtracted in 100 components = 0.0896116 Jy
! Clean residual min=-0.004992 max=0.010531 Jy/beam
! Clean residual mean=-0.000001 rms=0.001420 Jy/beam
! Combined flux in latest and established models = 0.0896116 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0896116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.067382Jy  sigma=1.475859
! Fit after  self-cal, rms=0.066524Jy  sigma=1.458023
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012905 Jy
! Component: 100  -  total flux cleaned = 0.019966 Jy
! Total flux subtracted in 100 components = 0.019966 Jy
! Clean residual min=-0.003708 max=0.003984 Jy/beam
! Clean residual mean=-0.000002 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.109578 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 27 components and 0.109578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063665Jy  sigma=1.385951
! Fit after  self-cal, rms=0.063562Jy  sigma=1.383588
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00534117 Jy
! Component: 100  -  total flux cleaned = 0.00824329 Jy
! Total flux subtracted in 100 components = 0.00824329 Jy
! Clean residual min=-0.003392 max=0.003600 Jy/beam
! Clean residual mean=-0.000003 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.117821 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 32 components and 0.117821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063108Jy  sigma=1.372017
! Fit after  self-cal, rms=0.063060Jy  sigma=1.371075
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9763 mas, bmaj=2.249 mas, bpa=5.255 degrees
! Estimated noise=0.268041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00456924 Jy
! Component: 100  -  total flux cleaned = 0.00734743 Jy
! Component: 150  -  total flux cleaned = 0.00934871 Jy
! Component: 200  -  total flux cleaned = 0.0108838 Jy
! Total flux subtracted in 200 components = 0.0108838 Jy
! Clean residual min=-0.002205 max=0.002961 Jy/beam
! Clean residual mean=0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.128705 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 51 components and 0.128705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062700Jy  sigma=1.361562
! Fit after  self-cal, rms=0.062633Jy  sigma=1.360176
! Inverting map 
! Added new window around map position (0.6, 9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0029705 Jy
! Component: 100  -  total flux cleaned = 0.00477736 Jy
! Component: 150  -  total flux cleaned = 0.00619359 Jy
! Component: 200  -  total flux cleaned = 0.00737985 Jy
! Total flux subtracted in 200 components = 0.00737985 Jy
! Clean residual min=-0.001663 max=0.001592 Jy/beam
! Clean residual mean=0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.136085 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 74 components and 0.136085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062464Jy  sigma=1.356138
! Fit after  self-cal, rms=0.062443Jy  sigma=1.355770
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9763 x 2.249 at 5.255 degrees (North through East)
! Clean map  min=-0.0015499  max=0.0848 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        0.94     KP        0.97     
!   LA        1.02     MK        0.94     NL        1.01     OV        0.99     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.97     KP        0.98     
!   LA        1.00     MK        1.09     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.94     KP        0.97     
!   LA        0.99     MK        1.12     NL        1.00     OV        1.01     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.10     NL        0.99     OV        1.02     
!   PT        0.98     SC        1.03     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.03     KP        0.99     
!   LA        0.99     MK        0.94     NL        1.01     OV        1.03     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.00     KP        1.03     
!   LA        0.99     MK        0.94     NL        1.04     OV        0.97     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.02     KP        0.99     
!   LA        0.98     MK        0.90     NL        0.99     OV        0.95     
!   PT        1.01     SC        0.97     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062443Jy  sigma=1.355770
! Fit after  self-cal, rms=0.062187Jy  sigma=1.353032
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9745 mas, bmaj=2.253 mas, bpa=5.165 degrees
! Estimated noise=0.267094 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012179 Jy
! Component: 100  -  total flux cleaned = 0.00207424 Jy
! Component: 150  -  total flux cleaned = 0.00263319 Jy
! Component: 200  -  total flux cleaned = 0.00291748 Jy
! Total flux subtracted in 200 components = 0.00291748 Jy
! Clean residual min=-0.001510 max=0.001340 Jy/beam
! Clean residual mean=-0.000002 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.139002 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 90 components and 0.139002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062152Jy  sigma=1.352215
! Fit after  self-cal, rms=0.062156Jy  sigma=1.352074
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062156Jy  sigma=1.352074
! Fit after  self-cal, rms=0.062349Jy  sigma=1.349595
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9738 mas, bmaj=2.252 mas, bpa=5.062 degrees
! Estimated noise=0.26728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000822072 Jy
! Component: 100  -  total flux cleaned = 0.00106877 Jy
! Component: 150  -  total flux cleaned = 0.00115656 Jy
! Component: 200  -  total flux cleaned = 0.00123869 Jy
! Total flux subtracted in 200 components = 0.00123869 Jy
! Clean residual min=-0.001389 max=0.001357 Jy/beam
! Clean residual mean=-0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.140241 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 103 components and 0.140241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062331Jy  sigma=1.349155
! Fit after  self-cal, rms=0.062335Jy  sigma=1.349061
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235397 Jy
! Component: 100  -  total flux cleaned = 0.000293104 Jy
! Component: 150  -  total flux cleaned = 0.000383009 Jy
! Component: 200  -  total flux cleaned = 0.00045026 Jy
! Total flux subtracted in 200 components = 0.00045026 Jy
! Clean residual min=-0.001376 max=0.001330 Jy/beam
! Clean residual mean=-0.000000 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.140691 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 109 components and 0.140691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062325Jy  sigma=1.348828
! Fit after  self-cal, rms=0.062324Jy  sigma=1.348816
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062324Jy  sigma=1.348816
! Fit after  self-cal, rms=0.062278Jy  sigma=1.348779
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9716 mas, bmaj=2.248 mas, bpa=4.934 degrees
! Estimated noise=0.266925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029546 Jy
! Component: 100  -  total flux cleaned = 0.000362836 Jy
! Component: 150  -  total flux cleaned = 0.000440485 Jy
! Component: 200  -  total flux cleaned = 0.000499436 Jy
! Total flux subtracted in 200 components = 0.000499436 Jy
! Clean residual min=-0.001359 max=0.001337 Jy/beam
! Clean residual mean=-0.000000 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.14119 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 121 components and 0.14119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062270Jy  sigma=1.348599
! Fit after  self-cal, rms=0.062270Jy  sigma=1.348589
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115097 Jy
! Component: 100  -  total flux cleaned = 0.000185394 Jy
! Component: 150  -  total flux cleaned = 0.000238572 Jy
! Component: 200  -  total flux cleaned = 0.000289579 Jy
! Total flux subtracted in 200 components = 0.000289579 Jy
! Clean residual min=-0.001339 max=0.001319 Jy/beam
! Clean residual mean=-0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.14148 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 129 components and 0.14148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062264Jy  sigma=1.348466
! Fit after  self-cal, rms=0.062263Jy  sigma=1.348459
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062263Jy  sigma=1.348459
! Fit after  self-cal, rms=0.062213Jy  sigma=1.348448
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=3.695 mas, bpa=2.544 degrees
! Estimated noise=0.329316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208754 Jy
! Component: 100  -  total flux cleaned = 0.000221692 Jy
! Component: 150  -  total flux cleaned = 0.000232888 Jy
! Component: 200  -  total flux cleaned = 0.000242422 Jy
! Total flux subtracted in 200 components = 0.000242422 Jy
! Clean residual min=-0.001287 max=0.001167 Jy/beam
! Clean residual mean=0.000000 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.141722 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 149 components and 0.141722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062213Jy  sigma=1.348394
! Fit after  self-cal, rms=0.062213Jy  sigma=1.348379
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140057 Jy
! Component: 100  -  total flux cleaned = 0.00015823 Jy
! Component: 150  -  total flux cleaned = 0.000174942 Jy
! Component: 200  -  total flux cleaned = 0.000190069 Jy
! Total flux subtracted in 200 components = 0.000190069 Jy
! Clean residual min=-0.001267 max=0.001131 Jy/beam
! Clean residual mean=-0.000000 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.141912 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 159 components and 0.141912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062213Jy  sigma=1.348360
! Fit after  self-cal, rms=0.062213Jy  sigma=1.348350
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9699 mas, bmaj=2.245 mas, bpa=4.85 degrees
! Estimated noise=0.26662 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9699 x 2.245 at 4.85 degrees (North through East)
! Clean map  min=-0.0011629  max=0.084075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7545 mas, bmaj=1.958 mas, bpa=4.139 degrees
! Estimated noise=0.488953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0669438 Jy
! Component: 100  -  total flux cleaned = 0.0913307 Jy
! Component: 150  -  total flux cleaned = 0.102961 Jy
! Component: 200  -  total flux cleaned = 0.110007 Jy
! Total flux subtracted in 200 components = 0.110007 Jy
! Clean residual min=-0.003636 max=0.004228 Jy/beam
! Clean residual mean=-0.000002 rms=0.000857 Jy/beam
! Combined flux in latest and established models = 0.110007 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.110007 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9699 mas, bmaj=2.245 mas, bpa=4.85 degrees
! Estimated noise=0.26662 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00700854 Jy
! Component: 100  -  total flux cleaned = 0.0119278 Jy
! Component: 150  -  total flux cleaned = 0.015569 Jy
! Component: 200  -  total flux cleaned = 0.0183828 Jy
! Total flux subtracted in 200 components = 0.0183828 Jy
! Clean residual min=-0.001776 max=0.001967 Jy/beam
! Clean residual mean=0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.12839 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 59 components and 0.12839 Jy
! Inverting map 
! Added new window around map position (-39, -24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00229902 Jy
! Component: 100  -  total flux cleaned = 0.00414915 Jy
! Component: 150  -  total flux cleaned = 0.00569181 Jy
! Component: 200  -  total flux cleaned = 0.00700256 Jy
! Total flux subtracted in 200 components = 0.00700256 Jy
! Clean residual min=-0.001431 max=0.001378 Jy/beam
! Clean residual mean=0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.135393 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 83 components and 0.135393 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=3.695 mas, bpa=2.544 degrees
! Estimated noise=0.329316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165367 Jy
! Component: 100  -  total flux cleaned = 0.0028157 Jy
! Component: 150  -  total flux cleaned = 0.00371566 Jy
! Component: 200  -  total flux cleaned = 0.00444613 Jy
! Total flux subtracted in 200 components = 0.00444613 Jy
! Clean residual min=-0.001316 max=0.001209 Jy/beam
! Clean residual mean=0.000000 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.139839 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000607237 Jy
! Component: 100  -  total flux cleaned = 0.00111378 Jy
! Component: 150  -  total flux cleaned = 0.00142372 Jy
! Component: 200  -  total flux cleaned = 0.0016927 Jy
! Total flux subtracted in 200 components = 0.0016927 Jy
! Clean residual min=-0.001260 max=0.001216 Jy/beam
! Clean residual mean=-0.000001 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.141532 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 154 components and 0.141532 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9699 mas, bmaj=2.245 mas, bpa=4.85 degrees
! Estimated noise=0.26662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348334 Jy
! Component: 100  -  total flux cleaned = 0.000533144 Jy
! Component: 150  -  total flux cleaned = 0.000674752 Jy
! Component: 200  -  total flux cleaned = 0.000803174 Jy
! Total flux subtracted in 200 components = 0.000803174 Jy
! Clean residual min=-0.001332 max=0.001243 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.142335 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 171 components and 0.142335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062201Jy  sigma=1.348076
! Fit after  self-cal, rms=0.062194Jy  sigma=1.347919
wmodel /scr/pima/bg219e_uvs/J0819-0630_X_map.mod
! Writing 171 model components to file: /scr/pima/bg219e_uvs/J0819-0630_X_map.mod
wobs /scr/pima/bg219e_uvs/J0819-0630_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0819-0630_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0819-0630_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J0819-0630_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00031188 Jy
! Component: 100  -  total flux cleaned = -0.000422615 Jy
! Component: 150  -  total flux cleaned = -0.000549397 Jy
! Component: 200  -  total flux cleaned = -0.000671954 Jy
! Component: 250  -  total flux cleaned = -0.000750927 Jy
! Component: 300  -  total flux cleaned = -0.000731705 Jy
! Component: 350  -  total flux cleaned = -0.000731912 Jy
! Component: 400  -  total flux cleaned = -0.000768624 Jy
! Component: 450  -  total flux cleaned = -0.000786332 Jy
! Component: 500  -  total flux cleaned = -0.000768924 Jy
! Component: 550  -  total flux cleaned = -0.00082039 Jy
! Component: 600  -  total flux cleaned = -0.000786554 Jy
! Component: 650  -  total flux cleaned = -0.000836208 Jy
! Component: 700  -  total flux cleaned = -0.000820064 Jy
! Component: 750  -  total flux cleaned = -0.000820622 Jy
! Component: 800  -  total flux cleaned = -0.000805268 Jy
! Component: 850  -  total flux cleaned = -0.00082064 Jy
! Component: 900  -  total flux cleaned = -0.000805558 Jy
! Component: 950  -  total flux cleaned = -0.000820366 Jy
! Component: 1000  -  total flux cleaned = -0.000820085 Jy
! Component: 1050  -  total flux cleaned = -0.000834358 Jy
! Component: 1100  -  total flux cleaned = -0.000834077 Jy
! Component: 1150  -  total flux cleaned = -0.000819882 Jy
! Component: 1200  -  total flux cleaned = -0.000806317 Jy
! Component: 1250  -  total flux cleaned = -0.000819834 Jy
! Component: 1300  -  total flux cleaned = -0.000806304 Jy
! Component: 1350  -  total flux cleaned = -0.000792923 Jy
! Component: 1400  -  total flux cleaned = -0.000753758 Jy
! Component: 1450  -  total flux cleaned = -0.000753596 Jy
! Component: 1500  -  total flux cleaned = -0.000740987 Jy
! Component: 1550  -  total flux cleaned = -0.00070339 Jy
! Component: 1600  -  total flux cleaned = -0.000703551 Jy
! Component: 1650  -  total flux cleaned = -0.000666708 Jy
! Component: 1700  -  total flux cleaned = -0.000642307 Jy
! Component: 1750  -  total flux cleaned = -0.000654353 Jy
! Component: 1800  -  total flux cleaned = -0.000594611 Jy
! Component: 1850  -  total flux cleaned = -0.000582788 Jy
! Component: 1900  -  total flux cleaned = -0.000594303 Jy
! Component: 1950  -  total flux cleaned = -0.000582793 Jy
! Component: 2000  -  total flux cleaned = -0.000548424 Jy
! Component: 2050  -  total flux cleaned = -0.000525742 Jy
! Component: 2100  -  total flux cleaned = -0.000503139 Jy
! Component: 2150  -  total flux cleaned = -0.00045868 Jy
! Component: 2200  -  total flux cleaned = -0.0004367 Jy
! Component: 2250  -  total flux cleaned = -0.000393204 Jy
! Component: 2300  -  total flux cleaned = -0.000382468 Jy
! Component: 2350  -  total flux cleaned = -0.000339678 Jy
! Component: 2400  -  total flux cleaned = -0.000329109 Jy
! Component: 2450  -  total flux cleaned = -0.000308164 Jy
! Component: 2500  -  total flux cleaned = -0.000297842 Jy
! Component: 2550  -  total flux cleaned = -0.000256549 Jy
! Component: 2600  -  total flux cleaned = -0.000277002 Jy
! Component: 2650  -  total flux cleaned = -0.000246418 Jy
! Component: 2700  -  total flux cleaned = -0.000226247 Jy
! Component: 2750  -  total flux cleaned = -0.000186257 Jy
! Component: 2800  -  total flux cleaned = -0.000176382 Jy
! Component: 2850  -  total flux cleaned = -0.000156778 Jy
! Component: 2900  -  total flux cleaned = -0.000117843 Jy
! Component: 2950  -  total flux cleaned = -0.000156571 Jy
! Component: 3000  -  total flux cleaned = -0.000108541 Jy
! Component: 3050  -  total flux cleaned = -7.99331e-05 Jy
! Component: 3100  -  total flux cleaned = -5.15719e-05 Jy
! Component: 3150  -  total flux cleaned = -4.67072e-06 Jy
! Component: 3200  -  total flux cleaned = 2.32185e-05 Jy
! Component: 3250  -  total flux cleaned = 4.17661e-05 Jy
! Component: 3300  -  total flux cleaned = 8.76778e-05 Jy
! Component: 3350  -  total flux cleaned = 0.00010597 Jy
! Component: 3400  -  total flux cleaned = 0.000105969 Jy
! Component: 3450  -  total flux cleaned = 0.000141966 Jy
! Component: 3500  -  total flux cleaned = 0.000213448 Jy
! Component: 3550  -  total flux cleaned = 0.000231216 Jy
! Component: 3600  -  total flux cleaned = 0.000248793 Jy
! Component: 3650  -  total flux cleaned = 0.000248775 Jy
! Component: 3700  -  total flux cleaned = 0.000309702 Jy
! Component: 3750  -  total flux cleaned = 0.000318245 Jy
! Component: 3800  -  total flux cleaned = 0.000352557 Jy
! Component: 3850  -  total flux cleaned = 0.000361063 Jy
! Component: 3900  -  total flux cleaned = 0.000395001 Jy
! Component: 3950  -  total flux cleaned = 0.000403419 Jy
! Component: 4000  -  total flux cleaned = 0.000428514 Jy
! Component: 4050  -  total flux cleaned = 0.000478467 Jy
! Total flux subtracted in 4096 components = 0.000478433 Jy
! Clean residual min=-0.000521 max=0.000446 Jy/beam
! Clean residual mean=0.000000 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.142813 Jy
keep
! Adding 246 model components to the UV plane model.
! The established model now contains 417 components and 0.142813 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0819-0630_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9699 x 2.245 at 4.85 degrees (North through East)
! Clean map  min=-0.0011719  max=0.083516 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0819-0630_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0835162 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00013859 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.49783 0.49783 0.99566 1.99132 3.98264 7.96528 15.9306 31.8611 63.7222
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  602.615 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0819-0630_X_uvs.log closed on Thu Apr  7 09:03:01 2016