! Started logfile: /scr/pima/bg219e_uvs/J0819-0630_X_dfm.log on Thu May 19 18:29:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0819-0630_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0819-0630_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.77433 visibilities/baseline/integration-bin.
! Found source: J0819-0630
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24252 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0819-0630_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010759Jy  sigma=22.380340
! Fit after  self-cal, rms=0.912928Jy  sigma=20.191333
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7424 mas, bmaj=1.871 mas, bpa=5.453 degrees
! Estimated noise=0.426221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0639871 Jy
! Component: 100  -  total flux cleaned = 0.086574 Jy
! Total flux subtracted in 100 components = 0.086574 Jy
! Clean residual min=-0.004658 max=0.010496 Jy/beam
! Clean residual mean=-0.000001 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.086574 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.086574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070692Jy  sigma=1.476110
! Fit after  self-cal, rms=0.069876Jy  sigma=1.459614
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131634 Jy
! Component: 100  -  total flux cleaned = 0.0204589 Jy
! Total flux subtracted in 100 components = 0.0204589 Jy
! Clean residual min=-0.003275 max=0.004156 Jy/beam
! Clean residual mean=-0.000002 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.107033 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 27 components and 0.107033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066752Jy  sigma=1.382676
! Fit after  self-cal, rms=0.066653Jy  sigma=1.380485
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00548444 Jy
! Component: 100  -  total flux cleaned = 0.00855645 Jy
! Total flux subtracted in 100 components = 0.00855645 Jy
! Clean residual min=-0.002837 max=0.003791 Jy/beam
! Clean residual mean=-0.000002 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.115589 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 31 components and 0.115589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066113Jy  sigma=1.366805
! Fit after  self-cal, rms=0.066070Jy  sigma=1.366012
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9683 mas, bmaj=2.231 mas, bpa=5.4 degrees
! Estimated noise=0.213752 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00474153 Jy
! Component: 100  -  total flux cleaned = 0.00785037 Jy
! Component: 150  -  total flux cleaned = 0.0101661 Jy
! Component: 200  -  total flux cleaned = 0.0119649 Jy
! Total flux subtracted in 200 components = 0.0119649 Jy
! Clean residual min=-0.001787 max=0.002432 Jy/beam
! Clean residual mean=0.000001 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.127554 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 54 components and 0.127554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065668Jy  sigma=1.355905
! Fit after  self-cal, rms=0.065602Jy  sigma=1.354583
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9683 x 2.231 at 5.4 degrees (North through East)
! Clean map  min=-0.0018007  max=0.084782 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        0.94     KP        0.97     
!   LA        1.01     MK        0.96     NL        1.01     OV        0.98     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.97     KP        0.98     
!   LA        0.98     MK        1.12     NL        1.01     OV        0.98     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.94     KP        0.97     
!   LA        0.98     MK        1.14     NL        1.00     OV        1.00     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.98     KP        0.99     
!   LA        0.96     MK        1.12     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.96     KP        0.97     
!   LA        1.00     MK        1.13     NL        0.98     OV        1.00     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.04     KP        0.98     
!   LA        0.98     MK        0.94     NL        1.01     OV        1.02     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.01     KP        1.03     
!   LA        0.97     MK        0.93     NL        1.04     OV        0.96     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.03     KP        0.99     
!   LA        0.97     MK        0.91     NL        0.99     OV        0.94     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.99     KP        0.99     
!   LA        1.02     MK        1.04     NL        1.02     OV        0.96     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        0.99     KP        0.98     
!   LA        0.96     MK        0.96     NL        1.03     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.97     KP        0.99     
!   LA        0.96     MK        0.89     NL        1.03     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.065602Jy  sigma=1.354583
! Fit after  self-cal, rms=0.065076Jy  sigma=1.351789
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9694 mas, bmaj=2.24 mas, bpa=5.336 degrees
! Estimated noise=0.211712 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238984 Jy
! Component: 100  -  total flux cleaned = 0.00399058 Jy
! Component: 150  -  total flux cleaned = 0.00495169 Jy
! Component: 200  -  total flux cleaned = 0.0055389 Jy
! Total flux subtracted in 200 components = 0.0055389 Jy
! Clean residual min=-0.001597 max=0.001514 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.133093 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 74 components and 0.133093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064958Jy  sigma=1.349201
! Fit after  self-cal, rms=0.064955Jy  sigma=1.348929
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064955Jy  sigma=1.348929
! Fit after  self-cal, rms=0.064935Jy  sigma=1.346216
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9693 mas, bmaj=2.241 mas, bpa=5.167 degrees
! Estimated noise=0.211767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118823 Jy
! Component: 100  -  total flux cleaned = 0.0017004 Jy
! Component: 150  -  total flux cleaned = 0.00191483 Jy
! Component: 200  -  total flux cleaned = 0.00215945 Jy
! Total flux subtracted in 200 components = 0.00215945 Jy
! Clean residual min=-0.001277 max=0.001284 Jy/beam
! Clean residual mean=-0.000000 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.135253 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.135253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064902Jy  sigma=1.345416
! Fit after  self-cal, rms=0.064905Jy  sigma=1.345278
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.2, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000693943 Jy
! Component: 100  -  total flux cleaned = 0.000726976 Jy
! Component: 150  -  total flux cleaned = 0.000877985 Jy
! Component: 200  -  total flux cleaned = 0.000981066 Jy
! Total flux subtracted in 200 components = 0.000981066 Jy
! Clean residual min=-0.001183 max=0.001158 Jy/beam
! Clean residual mean=-0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.136234 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 95 components and 0.136234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064867Jy  sigma=1.344448
! Fit after  self-cal, rms=0.064860Jy  sigma=1.344379
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064860Jy  sigma=1.344379
! Fit after  self-cal, rms=0.064822Jy  sigma=1.344305
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9678 mas, bmaj=2.237 mas, bpa=5.064 degrees
! Estimated noise=0.211492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411247 Jy
! Component: 100  -  total flux cleaned = 0.000509555 Jy
! Component: 150  -  total flux cleaned = 0.000531026 Jy
! Component: 200  -  total flux cleaned = 0.000572452 Jy
! Total flux subtracted in 200 components = 0.000572452 Jy
! Clean residual min=-0.001121 max=0.001148 Jy/beam
! Clean residual mean=-0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.136806 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 101 components and 0.136806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064805Jy  sigma=1.343942
! Fit after  self-cal, rms=0.064803Jy  sigma=1.343915
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-26.2, 37.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000655357 Jy
! Component: 100  -  total flux cleaned = 0.000918649 Jy
! Component: 150  -  total flux cleaned = 0.00105178 Jy
! Component: 200  -  total flux cleaned = 0.00115407 Jy
! Total flux subtracted in 200 components = 0.00115407 Jy
! Clean residual min=-0.001059 max=0.000985 Jy/beam
! Clean residual mean=-0.000001 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.13796 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 118 components and 0.13796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064780Jy  sigma=1.343421
! Fit after  self-cal, rms=0.064779Jy  sigma=1.343378
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064779Jy  sigma=1.343378
! Fit after  self-cal, rms=0.064675Jy  sigma=1.343338
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=3.689 mas, bpa=2.348 degrees
! Estimated noise=0.25964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000764944 Jy
! Component: 100  -  total flux cleaned = 0.00115164 Jy
! Component: 150  -  total flux cleaned = 0.00141006 Jy
! Component: 200  -  total flux cleaned = 0.00158171 Jy
! Total flux subtracted in 200 components = 0.00158171 Jy
! Clean residual min=-0.001067 max=0.000912 Jy/beam
! Clean residual mean=-0.000001 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.139542 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.139542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064670Jy  sigma=1.343224
! Fit after  self-cal, rms=0.064666Jy  sigma=1.343185
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000277899 Jy
! Component: 100  -  total flux cleaned = 0.00050678 Jy
! Component: 150  -  total flux cleaned = 0.000637418 Jy
! Component: 200  -  total flux cleaned = 0.00069721 Jy
! Total flux subtracted in 200 components = 0.00069721 Jy
! Clean residual min=-0.001001 max=0.000845 Jy/beam
! Clean residual mean=-0.000002 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.140239 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 148 components and 0.140239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064665Jy  sigma=1.343145
! Fit after  self-cal, rms=0.064663Jy  sigma=1.343130
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9663 mas, bmaj=2.234 mas, bpa=4.956 degrees
! Estimated noise=0.211169 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9663 x 2.234 at 4.956 degrees (North through East)
! Clean map  min=-0.0012543  max=0.0835 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7391 mas, bmaj=1.873 mas, bpa=5.006 degrees
! Estimated noise=0.41942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0643388 Jy
! Component: 100  -  total flux cleaned = 0.0884488 Jy
! Component: 150  -  total flux cleaned = 0.100328 Jy
! Component: 200  -  total flux cleaned = 0.107239 Jy
! Total flux subtracted in 200 components = 0.107239 Jy
! Clean residual min=-0.003174 max=0.003994 Jy/beam
! Clean residual mean=-0.000002 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.107239 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.107239 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9663 mas, bmaj=2.234 mas, bpa=4.956 degrees
! Estimated noise=0.211169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00699551 Jy
! Component: 100  -  total flux cleaned = 0.0117669 Jy
! Component: 150  -  total flux cleaned = 0.0154082 Jy
! Component: 200  -  total flux cleaned = 0.0182807 Jy
! Total flux subtracted in 200 components = 0.0182807 Jy
! Clean residual min=-0.001655 max=0.001780 Jy/beam
! Clean residual mean=0.000001 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.12552 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 58 components and 0.12552 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=3.689 mas, bpa=2.348 degrees
! Estimated noise=0.25964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00341608 Jy
! Component: 100  -  total flux cleaned = 0.00563226 Jy
! Component: 150  -  total flux cleaned = 0.00731344 Jy
! Component: 200  -  total flux cleaned = 0.00867622 Jy
! Total flux subtracted in 200 components = 0.00867622 Jy
! Clean residual min=-0.001330 max=0.001138 Jy/beam
! Clean residual mean=0.000000 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.134196 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113949 Jy
! Component: 100  -  total flux cleaned = 0.00210103 Jy
! Component: 150  -  total flux cleaned = 0.00291636 Jy
! Component: 200  -  total flux cleaned = 0.00342628 Jy
! Total flux subtracted in 200 components = 0.00342628 Jy
! Clean residual min=-0.001129 max=0.000949 Jy/beam
! Clean residual mean=-0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.137623 Jy
! Adding 108 model components to the UV plane model.
! The established model now contains 156 components and 0.137623 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9663 mas, bmaj=2.234 mas, bpa=4.956 degrees
! Estimated noise=0.211169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.18665e-05 Jy
! Component: 100  -  total flux cleaned = 0.000287008 Jy
! Component: 150  -  total flux cleaned = 0.00055199 Jy
! Component: 200  -  total flux cleaned = 0.000787034 Jy
! Total flux subtracted in 200 components = 0.000787034 Jy
! Clean residual min=-0.001131 max=0.001085 Jy/beam
! Clean residual mean=-0.000000 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.13841 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 176 components and 0.13841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064699Jy  sigma=1.343881
! Fit after  self-cal, rms=0.064683Jy  sigma=1.343599
wmodel /J0819-0630_X_map.mod
! wmodel: Unable to open new model file: /J0819-0630_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0819-0630_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9663 x 2.234 at 4.956 degrees (North through East)
! Clean map  min=-0.00099417  max=0.083193 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0819-0630_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0831933 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000255189 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.920225 0.920225 1.84045 3.6809 7.3618 14.7236 29.4472 58.8944
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  326.007 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0819-0630_X_dfm.log closed on Thu May 19 18:29:44 2016