! Started logfile: /scr/pima/bg219e_uvs/J0813+2542_S_dfm.log on Thu May 19 18:29:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0813+2542_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0813+2542_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.837817 visibilities/baseline/integration-bin.
! Found source: J0813+2542
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 8596 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0813+2542_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.102494Jy  sigma=22.280620
! Fit after  self-cal, rms=0.557125Jy  sigma=11.247114
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.296 mas, bmaj=5.389 mas, bpa=-7.447 degrees
! Estimated noise=0.621294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.339511 Jy
! Component: 100  -  total flux cleaned = 0.438457 Jy
! Total flux subtracted in 100 components = 0.438457 Jy
! Clean residual min=-0.011671 max=0.037960 Jy/beam
! Clean residual mean=-0.000023 rms=0.003551 Jy/beam
! Combined flux in latest and established models = 0.438457 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.438457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085728Jy  sigma=1.683787
! Fit after  self-cal, rms=0.085658Jy  sigma=1.682155
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.036966 Jy
! Component: 100  -  total flux cleaned = 0.0490071 Jy
! Total flux subtracted in 100 components = 0.0490071 Jy
! Clean residual min=-0.007858 max=0.008826 Jy/beam
! Clean residual mean=-0.000001 rms=0.001933 Jy/beam
! Combined flux in latest and established models = 0.487464 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 11 components and 0.487464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071573Jy  sigma=1.381703
! Fit after  self-cal, rms=0.071555Jy  sigma=1.381104
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.087 mas, bmaj=6.332 mas, bpa=-6.069 degrees
! Estimated noise=0.391058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010442 Jy
! Component: 100  -  total flux cleaned = 0.000655676 Jy
! Component: 150  -  total flux cleaned = 0.000206469 Jy
! Component: 200  -  total flux cleaned = -1.9401e-05 Jy
! Total flux subtracted in 200 components = -1.9401e-05 Jy
! Clean residual min=-0.005726 max=0.008103 Jy/beam
! Clean residual mean=-0.000012 rms=0.001844 Jy/beam
! Combined flux in latest and established models = 0.487444 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.487444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070814Jy  sigma=1.363720
! Fit after  self-cal, rms=0.070811Jy  sigma=1.363640
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.087 x 6.332 at -6.069 degrees (North through East)
! Clean map  min=-0.0056433  max=0.44545 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        0.97     KP        1.00     
!   LA        0.97     MK        1.04     NL        0.97     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        0.97     KP        0.99     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.97     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.08     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.04     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.12     HN        0.98     KP        1.01     
!   LA        0.98     MK        1.03     NL        0.97     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.070811Jy  sigma=1.363640
! Fit after  self-cal, rms=0.068543Jy  sigma=1.297130
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.103 mas, bmaj=6.334 mas, bpa=-5.479 degrees
! Estimated noise=0.39085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000479257 Jy
! Component: 100  -  total flux cleaned = 0.000552167 Jy
! Component: 150  -  total flux cleaned = 0.000615676 Jy
! Component: 200  -  total flux cleaned = 0.000669682 Jy
! Total flux subtracted in 200 components = 0.000669682 Jy
! Clean residual min=-0.004372 max=0.004438 Jy/beam
! Clean residual mean=-0.000014 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 0.488114 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 22 components and 0.488114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068507Jy  sigma=1.296505
! Fit after  self-cal, rms=0.068527Jy  sigma=1.296385
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068527Jy  sigma=1.296385
! Fit after  self-cal, rms=0.065964Jy  sigma=1.251374
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.104 mas, bmaj=6.333 mas, bpa=-5.455 degrees
! Estimated noise=0.390922 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000654855 Jy
! Component: 100  -  total flux cleaned = 0.000732411 Jy
! Component: 150  -  total flux cleaned = 0.000780979 Jy
! Component: 200  -  total flux cleaned = 0.000804071 Jy
! Total flux subtracted in 200 components = 0.000804071 Jy
! Clean residual min=-0.002584 max=0.002456 Jy/beam
! Clean residual mean=0.000004 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.488918 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.488918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065942Jy  sigma=1.250961
! Fit after  self-cal, rms=0.065950Jy  sigma=1.250882
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.72139e-05 Jy
! Component: 100  -  total flux cleaned = 7.01233e-05 Jy
! Component: 150  -  total flux cleaned = 9.07932e-05 Jy
! Component: 200  -  total flux cleaned = 0.000129969 Jy
! Total flux subtracted in 200 components = 0.000129969 Jy
! Clean residual min=-0.002583 max=0.002444 Jy/beam
! Clean residual mean=0.000004 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.489048 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 29 components and 0.489048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065935Jy  sigma=1.250618
! Fit after  self-cal, rms=0.065935Jy  sigma=1.250583
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065935Jy  sigma=1.250583
! Fit after  self-cal, rms=0.065944Jy  sigma=1.250533
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.104 mas, bmaj=6.333 mas, bpa=-5.413 degrees
! Estimated noise=0.391042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394756 Jy
! Component: 100  -  total flux cleaned = 0.000437562 Jy
! Component: 150  -  total flux cleaned = 0.000496774 Jy
! Component: 200  -  total flux cleaned = 0.000533747 Jy
! Total flux subtracted in 200 components = 0.000533747 Jy
! Clean residual min=-0.002613 max=0.002426 Jy/beam
! Clean residual mean=0.000004 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.489582 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 30 components and 0.489582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065930Jy  sigma=1.250283
! Fit after  self-cal, rms=0.065930Jy  sigma=1.250253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.59625e-05 Jy
! Component: 100  -  total flux cleaned = 5.14305e-05 Jy
! Component: 150  -  total flux cleaned = 6.87387e-05 Jy
! Component: 200  -  total flux cleaned = 8.47899e-05 Jy
! Total flux subtracted in 200 components = 8.47899e-05 Jy
! Clean residual min=-0.002607 max=0.002416 Jy/beam
! Clean residual mean=0.000004 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.489667 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.489667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065919Jy  sigma=1.250066
! Fit after  self-cal, rms=0.065919Jy  sigma=1.250040
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065919Jy  sigma=1.250040
! Fit after  self-cal, rms=0.065929Jy  sigma=1.250015
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.921 mas, bmaj=9.802 mas, bpa=-3.357 degrees
! Estimated noise=0.468833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107475 Jy
! Component: 100  -  total flux cleaned = 0.00107266 Jy
! Component: 150  -  total flux cleaned = 0.00107247 Jy
! Component: 200  -  total flux cleaned = 0.00107274 Jy
! Total flux subtracted in 200 components = 0.00107274 Jy
! Clean residual min=-0.002826 max=0.002973 Jy/beam
! Clean residual mean=0.000008 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.490739 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 36 components and 0.490739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065928Jy  sigma=1.250109
! Fit after  self-cal, rms=0.065924Jy  sigma=1.249994
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (47, 64.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025979 Jy
! Component: 100  -  total flux cleaned = 0.00391763 Jy
! Component: 150  -  total flux cleaned = 0.00437007 Jy
! Component: 200  -  total flux cleaned = 0.00463784 Jy
! Total flux subtracted in 200 components = 0.00463784 Jy
! Clean residual min=-0.002380 max=0.002322 Jy/beam
! Clean residual mean=0.000003 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.495377 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 75 components and 0.495377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065843Jy  sigma=1.248210
! Fit after  self-cal, rms=0.065837Jy  sigma=1.248047
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.104 mas, bmaj=6.332 mas, bpa=-5.373 degrees
! Estimated noise=0.391141 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.104 x 6.332 at -5.373 degrees (North through East)
! Clean map  min=-0.0022365  max=0.44443 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.313 mas, bmaj=5.389 mas, bpa=-6.889 degrees
! Estimated noise=0.621697 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.339287 Jy
! Component: 100  -  total flux cleaned = 0.437336 Jy
! Component: 150  -  total flux cleaned = 0.473903 Jy
! Component: 200  -  total flux cleaned = 0.488139 Jy
! Total flux subtracted in 200 components = 0.488139 Jy
! Clean residual min=-0.004339 max=0.005796 Jy/beam
! Clean residual mean=0.000002 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 0.488139 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.488139 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.104 mas, bmaj=6.332 mas, bpa=-5.373 degrees
! Estimated noise=0.391141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354105 Jy
! Component: 100  -  total flux cleaned = 0.00406642 Jy
! Component: 150  -  total flux cleaned = 0.00437486 Jy
! Component: 200  -  total flux cleaned = 0.0049247 Jy
! Total flux subtracted in 200 components = 0.0049247 Jy
! Clean residual min=-0.002578 max=0.002243 Jy/beam
! Clean residual mean=0.000003 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.493064 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 30 components and 0.493064 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.921 mas, bmaj=9.802 mas, bpa=-3.357 degrees
! Estimated noise=0.468833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187945 Jy
! Component: 100  -  total flux cleaned = 0.00288523 Jy
! Component: 150  -  total flux cleaned = 0.00323228 Jy
! Component: 200  -  total flux cleaned = 0.0033854 Jy
! Total flux subtracted in 200 components = 0.0033854 Jy
! Clean residual min=-0.002365 max=0.002170 Jy/beam
! Clean residual mean=0.000002 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.496449 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00010398 Jy
! Component: 100  -  total flux cleaned = 0.000227032 Jy
! Component: 150  -  total flux cleaned = 0.000310247 Jy
! Component: 200  -  total flux cleaned = 0.000387066 Jy
! Total flux subtracted in 200 components = 0.000387066 Jy
! Clean residual min=-0.002276 max=0.002181 Jy/beam
! Clean residual mean=0.000002 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.496836 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 87 components and 0.496836 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.104 mas, bmaj=6.332 mas, bpa=-5.373 degrees
! Estimated noise=0.391141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000268047 Jy
! Component: 100  -  total flux cleaned = -0.000273537 Jy
! Component: 150  -  total flux cleaned = -0.000223542 Jy
! Component: 200  -  total flux cleaned = -0.000265055 Jy
! Total flux subtracted in 200 components = -0.000265055 Jy
! Clean residual min=-0.002283 max=0.002358 Jy/beam
! Clean residual mean=0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.496571 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 101 components and 0.496571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065853Jy  sigma=1.248371
! Fit after  self-cal, rms=0.065851Jy  sigma=1.248273
wmodel /J0813+2542_S_map.mod
! wmodel: Unable to open new model file: /J0813+2542_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0813+2542_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.104 x 6.332 at -5.373 degrees (North through East)
! Clean map  min=-0.0022379  max=0.44407 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0813+2542_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.444074 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000480134 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.324361 0.324361 0.648722 1.29744 2.59489 5.18978 10.3796 20.7591 41.5182 83.0365
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.444 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  924.894 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0813+2542_S_dfm.log closed on Thu May 19 18:29:14 2016