! Started logfile: /scr/pima/bg219e_uvs/J0812-1810_X_dfm.log on Thu May 19 18:29:00 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0812-1810_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0812-1810_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.916005 visibilities/baseline/integration-bin.
! Found source: J0812-1810
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16620 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0812-1810_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012073Jy  sigma=21.646510
! Fit after  self-cal, rms=0.852234Jy  sigma=18.113099
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8071 mas, bmaj=3.147 mas, bpa=19.74 degrees
! Estimated noise=0.476778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112427 Jy
! Component: 100  -  total flux cleaned = 0.142974 Jy
! Total flux subtracted in 100 components = 0.142974 Jy
! Clean residual min=-0.008742 max=0.017172 Jy/beam
! Clean residual mean=-0.000009 rms=0.002245 Jy/beam
! Combined flux in latest and established models = 0.142974 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.142974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080555Jy  sigma=1.647311
! Fit after  self-cal, rms=0.080298Jy  sigma=1.643175
! Inverting map 
! Added new window around map position (1.6, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174609 Jy
! Component: 100  -  total flux cleaned = 0.0284951 Jy
! Total flux subtracted in 100 components = 0.0284951 Jy
! Clean residual min=-0.007336 max=0.007007 Jy/beam
! Clean residual mean=-0.000006 rms=0.001584 Jy/beam
! Combined flux in latest and established models = 0.171469 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 28 components and 0.171469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074192Jy  sigma=1.492277
! Fit after  self-cal, rms=0.073809Jy  sigma=1.484659
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=3.492 mas, bpa=17.74 degrees
! Estimated noise=0.269879 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159471 Jy
! Component: 100  -  total flux cleaned = 0.0260197 Jy
! Component: 150  -  total flux cleaned = 0.0329149 Jy
! Component: 200  -  total flux cleaned = 0.0377636 Jy
! Total flux subtracted in 200 components = 0.0377636 Jy
! Clean residual min=-0.003963 max=0.005839 Jy/beam
! Clean residual mean=-0.000005 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 0.209232 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 75 components and 0.209232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070084Jy  sigma=1.389638
! Fit after  self-cal, rms=0.069834Jy  sigma=1.383671
! Inverting map 
! Added new window around map position (3.4, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0062011 Jy
! Component: 100  -  total flux cleaned = 0.00961888 Jy
! Component: 150  -  total flux cleaned = 0.012086 Jy
! Component: 200  -  total flux cleaned = 0.0137719 Jy
! Total flux subtracted in 200 components = 0.0137719 Jy
! Clean residual min=-0.002757 max=0.003563 Jy/beam
! Clean residual mean=-0.000001 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.223004 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 123 components and 0.223004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069261Jy  sigma=1.369678
! Fit after  self-cal, rms=0.069157Jy  sigma=1.367136
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 3.492 at 17.74 degrees (North through East)
! Clean map  min=-0.0025452  max=0.14683 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.97     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        0.98     
!   LA        1.00     NL        1.06     OV        0.99     PT        0.96     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.10     KP        0.97     
!   LA        0.97     NL        1.00     OV        0.97     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.05     KP        0.96     
!   LA        1.01     NL        1.01     OV        1.00     PT        0.96     
!   SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.05     KP        0.97     
!   LA        0.99     NL        1.02     OV        1.02     PT        0.96     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.00     KP        0.98     
!   LA        0.99     NL        1.02     OV        0.99     PT        0.97     
!   SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.04     KP        0.97     
!   LA        0.98     NL        1.05     OV        0.96     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.07     OV        0.97     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.97     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.04     KP        0.99     
!   LA        1.03     NL        0.98     OV        1.01     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.04     KP        0.99     
!   LA        0.98     NL        1.02     OV        0.99     PT        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.05     KP        0.98     
!   LA        0.96     NL        1.03     OV        1.04     PT        1.02     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.069157Jy  sigma=1.367136
! Fit after  self-cal, rms=0.069540Jy  sigma=1.361381
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=3.517 mas, bpa=17.84 degrees
! Estimated noise=0.269557 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167943 Jy
! Component: 100  -  total flux cleaned = 0.00162764 Jy
! Component: 150  -  total flux cleaned = 0.00162224 Jy
! Component: 200  -  total flux cleaned = 0.00155099 Jy
! Total flux subtracted in 200 components = 0.00155099 Jy
! Clean residual min=-0.002080 max=0.002279 Jy/beam
! Clean residual mean=0.000003 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.224555 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 142 components and 0.224555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069446Jy  sigma=1.359324
! Fit after  self-cal, rms=0.069441Jy  sigma=1.358825
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069441Jy  sigma=1.358825
! Fit after  self-cal, rms=0.069557Jy  sigma=1.355070
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=3.512 mas, bpa=17.84 degrees
! Estimated noise=0.269506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000681302 Jy
! Component: 100  -  total flux cleaned = 0.000855998 Jy
! Component: 150  -  total flux cleaned = 0.000942651 Jy
! Component: 200  -  total flux cleaned = 0.000967239 Jy
! Total flux subtracted in 200 components = 0.000967239 Jy
! Clean residual min=-0.001861 max=0.002115 Jy/beam
! Clean residual mean=0.000002 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.225523 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 165 components and 0.225523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069522Jy  sigma=1.354281
! Fit after  self-cal, rms=0.069521Jy  sigma=1.354059
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-48.8, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183173 Jy
! Component: 100  -  total flux cleaned = 0.0026059 Jy
! Component: 150  -  total flux cleaned = 0.00285614 Jy
! Component: 200  -  total flux cleaned = 0.0030158 Jy
! Total flux subtracted in 200 components = 0.0030158 Jy
! Clean residual min=-0.001698 max=0.001907 Jy/beam
! Clean residual mean=0.000003 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.228539 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 183 components and 0.228539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069464Jy  sigma=1.352807
! Fit after  self-cal, rms=0.069457Jy  sigma=1.352674
! Inverting map 
! Added new window around map position (3, -23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000843167 Jy
! Component: 100  -  total flux cleaned = 0.0014013 Jy
! Component: 150  -  total flux cleaned = 0.00188988 Jy
! Component: 200  -  total flux cleaned = 0.00230194 Jy
! Total flux subtracted in 200 components = 0.00230194 Jy
! Clean residual min=-0.001576 max=0.001681 Jy/beam
! Clean residual mean=0.000002 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.23084 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 199 components and 0.230841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069398Jy  sigma=1.351606
! Fit after  self-cal, rms=0.069396Jy  sigma=1.351541
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069396Jy  sigma=1.351541
! Fit after  self-cal, rms=0.069504Jy  sigma=1.351165
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=3.511 mas, bpa=17.85 degrees
! Estimated noise=0.269069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000611478 Jy
! Component: 100  -  total flux cleaned = 0.000862227 Jy
! Component: 150  -  total flux cleaned = 0.0011176 Jy
! Component: 200  -  total flux cleaned = 0.00135627 Jy
! Total flux subtracted in 200 components = 0.00135627 Jy
! Clean residual min=-0.001487 max=0.001717 Jy/beam
! Clean residual mean=0.000002 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.232197 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 215 components and 0.232197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069478Jy  sigma=1.350672
! Fit after  self-cal, rms=0.069482Jy  sigma=1.350639
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (31, 51).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112713 Jy
! Component: 100  -  total flux cleaned = 0.0013197 Jy
! Component: 150  -  total flux cleaned = 0.00165869 Jy
! Component: 200  -  total flux cleaned = 0.00196753 Jy
! Total flux subtracted in 200 components = 0.00196753 Jy
! Clean residual min=-0.001419 max=0.001571 Jy/beam
! Clean residual mean=0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.234164 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 233 components and 0.234164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069440Jy  sigma=1.349839
! Fit after  self-cal, rms=0.069435Jy  sigma=1.349781
! Inverting map 
! Added new window around map position (0.8, 32.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000502338 Jy
! Component: 100  -  total flux cleaned = 0.000756182 Jy
! Component: 150  -  total flux cleaned = 0.000819759 Jy
! Component: 200  -  total flux cleaned = 0.000875388 Jy
! Total flux subtracted in 200 components = 0.000875388 Jy
! Clean residual min=-0.001339 max=0.001422 Jy/beam
! Clean residual mean=0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.23504 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 255 components and 0.23504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069391Jy  sigma=1.348941
! Fit after  self-cal, rms=0.069390Jy  sigma=1.348911
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069390Jy  sigma=1.348911
! Fit after  self-cal, rms=0.069273Jy  sigma=1.348825
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=4.862 mas, bpa=6.885 degrees
! Estimated noise=0.311505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000482386 Jy
! Component: 100  -  total flux cleaned = 0.000683809 Jy
! Component: 150  -  total flux cleaned = 0.000886247 Jy
! Component: 200  -  total flux cleaned = 0.00107383 Jy
! Total flux subtracted in 200 components = 0.00107383 Jy
! Clean residual min=-0.001239 max=0.001309 Jy/beam
! Clean residual mean=0.000001 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.236114 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 283 components and 0.236114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069262Jy  sigma=1.348540
! Fit after  self-cal, rms=0.069261Jy  sigma=1.348512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162065 Jy
! Component: 100  -  total flux cleaned = 0.000274361 Jy
! Component: 150  -  total flux cleaned = 0.000398641 Jy
! Component: 200  -  total flux cleaned = 0.000514691 Jy
! Total flux subtracted in 200 components = 0.000514691 Jy
! Clean residual min=-0.001229 max=0.001255 Jy/beam
! Clean residual mean=0.000002 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.236628 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 300 components and 0.236628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069254Jy  sigma=1.348344
! Fit after  self-cal, rms=0.069253Jy  sigma=1.348325
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=3.509 mas, bpa=17.84 degrees
! Estimated noise=0.268603 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 3.509 at 17.84 degrees (North through East)
! Clean map  min=-0.0021363  max=0.14577 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8051 mas, bmaj=3.159 mas, bpa=19.8 degrees
! Estimated noise=0.476608 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111889 Jy
! Component: 100  -  total flux cleaned = 0.145324 Jy
! Component: 150  -  total flux cleaned = 0.163504 Jy
! Component: 200  -  total flux cleaned = 0.17608 Jy
! Total flux subtracted in 200 components = 0.17608 Jy
! Clean residual min=-0.004858 max=0.007051 Jy/beam
! Clean residual mean=-0.000004 rms=0.001289 Jy/beam
! Combined flux in latest and established models = 0.17608 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.17608 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=3.509 mas, bpa=17.84 degrees
! Estimated noise=0.268603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155615 Jy
! Component: 100  -  total flux cleaned = 0.0255594 Jy
! Component: 150  -  total flux cleaned = 0.0323841 Jy
! Component: 200  -  total flux cleaned = 0.0371341 Jy
! Total flux subtracted in 200 components = 0.0371341 Jy
! Clean residual min=-0.002469 max=0.002829 Jy/beam
! Clean residual mean=-0.000002 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.213214 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 78 components and 0.213214 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=4.862 mas, bpa=6.885 degrees
! Estimated noise=0.311505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00489731 Jy
! Component: 100  -  total flux cleaned = 0.00808784 Jy
! Component: 150  -  total flux cleaned = 0.0102662 Jy
! Component: 200  -  total flux cleaned = 0.0117215 Jy
! Total flux subtracted in 200 components = 0.0117215 Jy
! Clean residual min=-0.001987 max=0.001662 Jy/beam
! Clean residual mean=-0.000000 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.224935 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129193 Jy
! Component: 100  -  total flux cleaned = 0.00230302 Jy
! Component: 150  -  total flux cleaned = 0.00290255 Jy
! Component: 200  -  total flux cleaned = 0.00349102 Jy
! Total flux subtracted in 200 components = 0.00349102 Jy
! Clean residual min=-0.001737 max=0.001534 Jy/beam
! Clean residual mean=0.000000 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.228426 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 160 components and 0.228426 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=3.509 mas, bpa=17.84 degrees
! Estimated noise=0.268603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000643569 Jy
! Component: 100  -  total flux cleaned = 0.0011635 Jy
! Component: 150  -  total flux cleaned = 0.00167765 Jy
! Component: 200  -  total flux cleaned = 0.00205264 Jy
! Total flux subtracted in 200 components = 0.00205264 Jy
! Clean residual min=-0.001488 max=0.001644 Jy/beam
! Clean residual mean=-0.000000 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.230479 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 180 components and 0.230479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069369Jy  sigma=1.350813
! Fit after  self-cal, rms=0.069349Jy  sigma=1.350412
wmodel /J0812-1810_X_map.mod
! wmodel: Unable to open new model file: /J0812-1810_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0812-1810_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 3.509 at 17.84 degrees (North through East)
! Clean map  min=-0.0018112  max=0.14533 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0812-1810_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.145325 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000364098 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.75162 0.75162 1.50324 3.00648 6.01296 12.0259 24.0518 48.1037 96.2074
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.145 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  399.137 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0812-1810_X_dfm.log closed on Thu May 19 18:29:03 2016