! Started logfile: /scr/pima/bg219e_uvs/J0812-1810_S_uvs.log on Thu Apr  7 06:39:01 2016
obs /scr/pima/bg219e_uvs/J0812-1810_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0812-1810_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.916005 visibilities/baseline/integration-bin.
! Found source: J0812-1810
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5540 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0812-1810_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036009Jy  sigma=16.892171
! Fit after  self-cal, rms=0.727369Jy  sigma=11.844176
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.076 mas, bmaj=11.59 mas, bpa=18.93 degrees
! Estimated noise=0.825041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204282 Jy
! Component: 100  -  total flux cleaned = 0.261551 Jy
! Total flux subtracted in 100 components = 0.261551 Jy
! Clean residual min=-0.010147 max=0.026072 Jy/beam
! Clean residual mean=-0.000013 rms=0.003381 Jy/beam
! Combined flux in latest and established models = 0.261551 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.261551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104598Jy  sigma=1.611934
! Fit after  self-cal, rms=0.104560Jy  sigma=1.611555
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0295486 Jy
! Component: 100  -  total flux cleaned = 0.047328 Jy
! Total flux subtracted in 100 components = 0.047328 Jy
! Clean residual min=-0.006671 max=0.009837 Jy/beam
! Clean residual mean=-0.000004 rms=0.001872 Jy/beam
! Combined flux in latest and established models = 0.308879 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 33 components and 0.308879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092919Jy  sigma=1.385812
! Fit after  self-cal, rms=0.092891Jy  sigma=1.385471
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.863 mas, bmaj=13.16 mas, bpa=17.31 degrees
! Estimated noise=0.615162 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154079 Jy
! Component: 100  -  total flux cleaned = 0.0233658 Jy
! Component: 150  -  total flux cleaned = 0.0278337 Jy
! Component: 200  -  total flux cleaned = 0.0305827 Jy
! Total flux subtracted in 200 components = 0.0305827 Jy
! Clean residual min=-0.004708 max=0.009083 Jy/beam
! Clean residual mean=-0.000003 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 0.339462 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 73 components and 0.339462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090440Jy  sigma=1.339083
! Fit after  self-cal, rms=0.090434Jy  sigma=1.338896
! Inverting map 
! Added new window around map position (9, 13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00829121 Jy
! Component: 100  -  total flux cleaned = 0.0120832 Jy
! Component: 150  -  total flux cleaned = 0.0131267 Jy
! Component: 200  -  total flux cleaned = 0.0136014 Jy
! Total flux subtracted in 200 components = 0.0136014 Jy
! Clean residual min=-0.004121 max=0.005455 Jy/beam
! Clean residual mean=0.000002 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 0.353063 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 114 components and 0.353063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089678Jy  sigma=1.325880
! Fit after  self-cal, rms=0.089548Jy  sigma=1.323358
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.863 x 13.16 at 17.31 degrees (North through East)
! Clean map  min=-0.0037046  max=0.277 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.04     KP        0.99     
!   LA        1.01     NL        0.99     OV        1.00     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.03     KP        1.00     
!   LA        1.01     NL        0.99     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.04     KP        0.99     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.07     KP        0.97     
!   LA        0.99     NL        0.98     OV        1.00     PT        0.98     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.089548Jy  sigma=1.323358
! Fit after  self-cal, rms=0.089963Jy  sigma=1.318694
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=13.24 mas, bpa=17.46 degrees
! Estimated noise=0.618011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293871 Jy
! Component: 100  -  total flux cleaned = 0.00296064 Jy
! Component: 150  -  total flux cleaned = 0.00272945 Jy
! Component: 200  -  total flux cleaned = 0.00262917 Jy
! Total flux subtracted in 200 components = 0.00262917 Jy
! Clean residual min=-0.003573 max=0.003581 Jy/beam
! Clean residual mean=0.000008 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.355692 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 148 components and 0.355692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089819Jy  sigma=1.316295
! Fit after  self-cal, rms=0.089811Jy  sigma=1.315802
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089811Jy  sigma=1.315802
! Fit after  self-cal, rms=0.088741Jy  sigma=1.309180
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.868 mas, bmaj=13.23 mas, bpa=17.43 degrees
! Estimated noise=0.618186 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169366 Jy
! Component: 100  -  total flux cleaned = 0.00159669 Jy
! Component: 150  -  total flux cleaned = 0.00137271 Jy
! Component: 200  -  total flux cleaned = 0.00133327 Jy
! Total flux subtracted in 200 components = 0.00133327 Jy
! Clean residual min=-0.003272 max=0.003192 Jy/beam
! Clean residual mean=0.000006 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.357025 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 184 components and 0.357025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088672Jy  sigma=1.308019
! Fit after  self-cal, rms=0.088656Jy  sigma=1.307829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000817579 Jy
! Component: 100  -  total flux cleaned = 0.000741254 Jy
! Component: 150  -  total flux cleaned = 0.000640437 Jy
! Component: 200  -  total flux cleaned = 0.000577517 Jy
! Total flux subtracted in 200 components = 0.000577517 Jy
! Clean residual min=-0.003136 max=0.003083 Jy/beam
! Clean residual mean=0.000006 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.357603 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 207 components and 0.357603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088624Jy  sigma=1.307329
! Fit after  self-cal, rms=0.088623Jy  sigma=1.307260
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088623Jy  sigma=1.307260
! Fit after  self-cal, rms=0.088335Jy  sigma=1.306249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.868 mas, bmaj=13.23 mas, bpa=17.4 degrees
! Estimated noise=0.61792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000620536 Jy
! Component: 100  -  total flux cleaned = 0.000350875 Jy
! Component: 150  -  total flux cleaned = 0.000148357 Jy
! Component: 200  -  total flux cleaned = -2.42093e-06 Jy
! Total flux subtracted in 200 components = -2.42093e-06 Jy
! Clean residual min=-0.002988 max=0.002996 Jy/beam
! Clean residual mean=0.000004 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.357601 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 231 components and 0.357601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088309Jy  sigma=1.305727
! Fit after  self-cal, rms=0.088303Jy  sigma=1.305676
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333182 Jy
! Component: 100  -  total flux cleaned = 0.000223431 Jy
! Component: 150  -  total flux cleaned = 0.000147378 Jy
! Component: 200  -  total flux cleaned = 0.000147858 Jy
! Total flux subtracted in 200 components = 0.000147858 Jy
! Clean residual min=-0.002917 max=0.002911 Jy/beam
! Clean residual mean=0.000004 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.357748 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 245 components and 0.357748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088287Jy  sigma=1.305410
! Fit after  self-cal, rms=0.088287Jy  sigma=1.305387
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088287Jy  sigma=1.305387
! Fit after  self-cal, rms=0.088407Jy  sigma=1.305319
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.768 mas, bmaj=17.79 mas, bpa=7.768 degrees
! Estimated noise=0.713646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.047e-06 Jy
! Component: 100  -  total flux cleaned = -0.000106318 Jy
! Component: 150  -  total flux cleaned = -0.000265826 Jy
! Component: 200  -  total flux cleaned = -0.000364176 Jy
! Total flux subtracted in 200 components = -0.000364176 Jy
! Clean residual min=-0.002718 max=0.002781 Jy/beam
! Clean residual mean=0.000006 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.357384 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 280 components and 0.357384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088398Jy  sigma=1.305220
! Fit after  self-cal, rms=0.088397Jy  sigma=1.305176
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000219006 Jy
! Component: 100  -  total flux cleaned = 0.00022111 Jy
! Component: 150  -  total flux cleaned = 0.000221685 Jy
! Component: 200  -  total flux cleaned = 0.000222123 Jy
! Total flux subtracted in 200 components = 0.000222123 Jy
! Clean residual min=-0.002726 max=0.002708 Jy/beam
! Clean residual mean=0.000006 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.357606 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 295 components and 0.357606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088393Jy  sigma=1.305150
! Fit after  self-cal, rms=0.088394Jy  sigma=1.305130
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=13.23 mas, bpa=17.4 degrees
! Estimated noise=0.618417 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.869 x 13.23 at 17.4 degrees (North through East)
! Clean map  min=-0.0028259  max=0.27711 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=11.67 mas, bpa=18.99 degrees
! Estimated noise=0.831632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.205736 Jy
! Component: 100  -  total flux cleaned = 0.262696 Jy
! Component: 150  -  total flux cleaned = 0.291641 Jy
! Component: 200  -  total flux cleaned = 0.309367 Jy
! Total flux subtracted in 200 components = 0.309367 Jy
! Clean residual min=-0.006661 max=0.009517 Jy/beam
! Clean residual mean=-0.000002 rms=0.001808 Jy/beam
! Combined flux in latest and established models = 0.309367 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.309367 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=13.23 mas, bpa=17.4 degrees
! Estimated noise=0.618417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172404 Jy
! Component: 100  -  total flux cleaned = 0.0278451 Jy
! Component: 150  -  total flux cleaned = 0.0348672 Jy
! Component: 200  -  total flux cleaned = 0.0396988 Jy
! Total flux subtracted in 200 components = 0.0396988 Jy
! Clean residual min=-0.004003 max=0.003232 Jy/beam
! Clean residual mean=0.000001 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.349066 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 81 components and 0.349066 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.768 mas, bmaj=17.79 mas, bpa=7.768 degrees
! Estimated noise=0.713646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479766 Jy
! Component: 100  -  total flux cleaned = 0.0071817 Jy
! Component: 150  -  total flux cleaned = 0.00762935 Jy
! Component: 200  -  total flux cleaned = 0.00795924 Jy
! Total flux subtracted in 200 components = 0.00795924 Jy
! Clean residual min=-0.003055 max=0.002852 Jy/beam
! Clean residual mean=0.000006 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.357025 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301958 Jy
! Component: 100  -  total flux cleaned = 0.000580335 Jy
! Component: 150  -  total flux cleaned = 0.000831137 Jy
! Component: 200  -  total flux cleaned = 0.000990432 Jy
! Total flux subtracted in 200 components = 0.000990432 Jy
! Clean residual min=-0.002951 max=0.002810 Jy/beam
! Clean residual mean=0.000006 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.358015 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 170 components and 0.358015 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.869 mas, bmaj=13.23 mas, bpa=17.4 degrees
! Estimated noise=0.618417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498257 Jy
! Component: 100  -  total flux cleaned = 0.000497913 Jy
! Component: 150  -  total flux cleaned = 0.000547513 Jy
! Component: 200  -  total flux cleaned = 0.000594004 Jy
! Total flux subtracted in 200 components = 0.000594004 Jy
! Clean residual min=-0.002957 max=0.002697 Jy/beam
! Clean residual mean=0.000004 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.358609 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 189 components and 0.358609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088459Jy  sigma=1.306237
! Fit after  self-cal, rms=0.088452Jy  sigma=1.305991
wmodel /scr/pima/bg219e_uvs/J0812-1810_S_map.mod
! Writing 189 model components to file: /scr/pima/bg219e_uvs/J0812-1810_S_map.mod
wobs /scr/pima/bg219e_uvs/J0812-1810_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0812-1810_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J0812-1810_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J0812-1810_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109091 Jy
! Component: 100  -  total flux cleaned = -0.0014846 Jy
! Component: 150  -  total flux cleaned = -0.00189929 Jy
! Component: 200  -  total flux cleaned = -0.00233462 Jy
! Component: 250  -  total flux cleaned = -0.00254444 Jy
! Component: 300  -  total flux cleaned = -0.00282885 Jy
! Component: 350  -  total flux cleaned = -0.00294755 Jy
! Component: 400  -  total flux cleaned = -0.00310069 Jy
! Component: 450  -  total flux cleaned = -0.00306241 Jy
! Component: 500  -  total flux cleaned = -0.00309894 Jy
! Component: 550  -  total flux cleaned = -0.00309904 Jy
! Component: 600  -  total flux cleaned = -0.0030638 Jy
! Component: 650  -  total flux cleaned = -0.0029272 Jy
! Component: 700  -  total flux cleaned = -0.00299517 Jy
! Component: 750  -  total flux cleaned = -0.00306104 Jy
! Component: 800  -  total flux cleaned = -0.00306091 Jy
! Component: 850  -  total flux cleaned = -0.00309255 Jy
! Component: 900  -  total flux cleaned = -0.0030928 Jy
! Component: 950  -  total flux cleaned = -0.00312293 Jy
! Component: 1000  -  total flux cleaned = -0.00315338 Jy
! Component: 1050  -  total flux cleaned = -0.00318335 Jy
! Component: 1100  -  total flux cleaned = -0.00315357 Jy
! Component: 1150  -  total flux cleaned = -0.0031247 Jy
! Component: 1200  -  total flux cleaned = -0.00312616 Jy
! Component: 1250  -  total flux cleaned = -0.00321107 Jy
! Component: 1300  -  total flux cleaned = -0.00323881 Jy
! Component: 1350  -  total flux cleaned = -0.00329343 Jy
! Component: 1400  -  total flux cleaned = -0.00329321 Jy
! Component: 1450  -  total flux cleaned = -0.00331951 Jy
! Component: 1500  -  total flux cleaned = -0.00334608 Jy
! Component: 1550  -  total flux cleaned = -0.00337218 Jy
! Component: 1600  -  total flux cleaned = -0.00332147 Jy
! Component: 1650  -  total flux cleaned = -0.00324675 Jy
! Component: 1700  -  total flux cleaned = -0.00322218 Jy
! Component: 1750  -  total flux cleaned = -0.00319796 Jy
! Component: 1800  -  total flux cleaned = -0.00324619 Jy
! Component: 1850  -  total flux cleaned = -0.00324633 Jy
! Component: 1900  -  total flux cleaned = -0.00322265 Jy
! Component: 1950  -  total flux cleaned = -0.00317575 Jy
! Component: 2000  -  total flux cleaned = -0.00315283 Jy
! Component: 2050  -  total flux cleaned = -0.00310734 Jy
! Component: 2100  -  total flux cleaned = -0.0030621 Jy
! Component: 2150  -  total flux cleaned = -0.00306238 Jy
! Component: 2200  -  total flux cleaned = -0.00306221 Jy
! Component: 2250  -  total flux cleaned = -0.00293125 Jy
! Component: 2300  -  total flux cleaned = -0.00284464 Jy
! Component: 2350  -  total flux cleaned = -0.00273775 Jy
! Component: 2400  -  total flux cleaned = -0.00265323 Jy
! Component: 2450  -  total flux cleaned = -0.00263202 Jy
! Component: 2500  -  total flux cleaned = -0.00254884 Jy
! Component: 2550  -  total flux cleaned = -0.00244601 Jy
! Component: 2600  -  total flux cleaned = -0.00234421 Jy
! Component: 2650  -  total flux cleaned = -0.00230378 Jy
! Component: 2700  -  total flux cleaned = -0.00214388 Jy
! Component: 2750  -  total flux cleaned = -0.00214367 Jy
! Component: 2800  -  total flux cleaned = -0.0020456 Jy
! Component: 2850  -  total flux cleaned = -0.00202622 Jy
! Component: 2900  -  total flux cleaned = -0.0020069 Jy
! Component: 2950  -  total flux cleaned = -0.00198784 Jy
! Component: 3000  -  total flux cleaned = -0.0019879 Jy
! Component: 3050  -  total flux cleaned = -0.00185647 Jy
! Component: 3100  -  total flux cleaned = -0.00187516 Jy
! Component: 3150  -  total flux cleaned = -0.00183837 Jy
! Component: 3200  -  total flux cleaned = -0.00178319 Jy
! Component: 3250  -  total flux cleaned = -0.00176517 Jy
! Component: 3300  -  total flux cleaned = -0.00169281 Jy
! Component: 3350  -  total flux cleaned = -0.00172861 Jy
! Component: 3400  -  total flux cleaned = -0.00167508 Jy
! Component: 3450  -  total flux cleaned = -0.00158673 Jy
! Component: 3500  -  total flux cleaned = -0.00158688 Jy
! Component: 3550  -  total flux cleaned = -0.00160445 Jy
! Component: 3600  -  total flux cleaned = -0.00155261 Jy
! Component: 3650  -  total flux cleaned = -0.00151809 Jy
! Component: 3700  -  total flux cleaned = -0.00155208 Jy
! Component: 3750  -  total flux cleaned = -0.0014335 Jy
! Component: 3800  -  total flux cleaned = -0.00145031 Jy
! Component: 3850  -  total flux cleaned = -0.00140013 Jy
! Component: 3900  -  total flux cleaned = -0.00136687 Jy
! Component: 3950  -  total flux cleaned = -0.00131725 Jy
! Component: 4000  -  total flux cleaned = -0.00123544 Jy
! Component: 4050  -  total flux cleaned = -0.00117021 Jy
! Total flux subtracted in 4096 components = -0.00115412 Jy
! Clean residual min=-0.000910 max=0.001083 Jy/beam
! Clean residual mean=-0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.357455 Jy
keep
! Adding 319 model components to the UV plane model.
! The established model now contains 508 components and 0.357455 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0812-1810_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.869 x 13.23 at 17.4 degrees (North through East)
! Clean map  min=-0.0020666  max=0.27729 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0812-1810_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.27729 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000318546 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.344635 0.344635 0.689269 1.37854 2.75708 5.51415 11.0283 22.0566 44.1132 88.2265
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.277 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  870.487 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0812-1810_S_uvs.log closed on Thu Apr  7 06:39:05 2016