! Started logfile: /scr/pima/bg219e_uvs/J0808+2646_X_uvs.log on Thu Apr  7 09:02:23 2016
obs /scr/pima/bg219e_uvs/J0808+2646_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0808+2646_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.817486 visibilities/baseline/integration-bin.
! Found source: J0808+2646
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26928 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0808+2646_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.018179Jy  sigma=23.926088
! Fit after  self-cal, rms=0.828772Jy  sigma=19.362760
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.803 mas, bmaj=1.345 mas, bpa=-10.38 degrees
! Estimated noise=0.462395 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120397 Jy
! Component: 100  -  total flux cleaned = 0.157651 Jy
! Total flux subtracted in 100 components = 0.157651 Jy
! Clean residual min=-0.008795 max=0.020534 Jy/beam
! Clean residual mean=-0.000026 rms=0.002372 Jy/beam
! Combined flux in latest and established models = 0.157651 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.157651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078067Jy  sigma=1.773286
! Fit after  self-cal, rms=0.077992Jy  sigma=1.771783
! Inverting map 
! Added new window around map position (-1, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0215207 Jy
! Component: 100  -  total flux cleaned = 0.0351253 Jy
! Total flux subtracted in 100 components = 0.0351253 Jy
! Clean residual min=-0.006518 max=0.008717 Jy/beam
! Clean residual mean=-0.000016 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.192776 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.192776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.067761Jy  sigma=1.519902
! Fit after  self-cal, rms=0.067600Jy  sigma=1.516711
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.08 mas, bmaj=1.639 mas, bpa=-4.194 degrees
! Estimated noise=0.258902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170359 Jy
! Component: 100  -  total flux cleaned = 0.02745 Jy
! Component: 150  -  total flux cleaned = 0.0343684 Jy
! Component: 200  -  total flux cleaned = 0.0391479 Jy
! Total flux subtracted in 200 components = 0.0391479 Jy
! Clean residual min=-0.003740 max=0.006058 Jy/beam
! Clean residual mean=-0.000016 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.231924 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 55 components and 0.231924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062761Jy  sigma=1.397653
! Fit after  self-cal, rms=0.062619Jy  sigma=1.394534
! Inverting map 
! Added new window around map position (1, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00640344 Jy
! Component: 100  -  total flux cleaned = 0.0103049 Jy
! Component: 150  -  total flux cleaned = 0.0131355 Jy
! Component: 200  -  total flux cleaned = 0.0152279 Jy
! Total flux subtracted in 200 components = 0.0152279 Jy
! Clean residual min=-0.002852 max=0.005360 Jy/beam
! Clean residual mean=-0.000007 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.247152 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 71 components and 0.247152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061865Jy  sigma=1.376353
! Fit after  self-cal, rms=0.061800Jy  sigma=1.374784
! Inverting map 
! Added new window around map position (-3.8, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00512171 Jy
! Component: 100  -  total flux cleaned = 0.00796499 Jy
! Component: 150  -  total flux cleaned = 0.010047 Jy
! Component: 200  -  total flux cleaned = 0.0117148 Jy
! Total flux subtracted in 200 components = 0.0117148 Jy
! Clean residual min=-0.002262 max=0.003128 Jy/beam
! Clean residual mean=-0.000003 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.258867 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 111 components and 0.258867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061339Jy  sigma=1.363234
! Fit after  self-cal, rms=0.061293Jy  sigma=1.362203
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.08 x 1.639 at -4.194 degrees (North through East)
! Clean map  min=-0.0020711  max=0.16302 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.02     KP        0.98     
!   LA        1.00     MK        0.94     NL        0.98     OV        1.01     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.98     KP        0.99     
!   LA        0.99     MK        0.94     NL        1.02     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.02     KP        0.97     
!   LA        0.97     MK        1.07     NL        1.00     OV        1.01     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.03     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.97     SC        1.00     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.97     KP        1.00     
!   LA        0.97     MK        0.93     NL        1.01     OV        1.04     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.03     KP        0.97     
!   LA        1.00     MK        1.08     NL        1.04     OV        1.02     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        0.99     
!   LA        0.99     MK        1.07     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061293Jy  sigma=1.362203
! Fit after  self-cal, rms=0.061241Jy  sigma=1.355139
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.637 mas, bpa=-3.73 degrees
! Estimated noise=0.258729 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 39.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192807 Jy
! Component: 100  -  total flux cleaned = 0.00227189 Jy
! Component: 150  -  total flux cleaned = 0.00270895 Jy
! Component: 200  -  total flux cleaned = 0.003165 Jy
! Total flux subtracted in 200 components = 0.003165 Jy
! Clean residual min=-0.001743 max=0.001736 Jy/beam
! Clean residual mean=0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.262032 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 130 components and 0.262032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061130Jy  sigma=1.352646
! Fit after  self-cal, rms=0.061129Jy  sigma=1.352450
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061129Jy  sigma=1.352450
! Fit after  self-cal, rms=0.061205Jy  sigma=1.350178
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.636 mas, bpa=-3.733 degrees
! Estimated noise=0.258709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000352451 Jy
! Component: 100  -  total flux cleaned = 0.000573081 Jy
! Component: 150  -  total flux cleaned = 0.000768363 Jy
! Component: 200  -  total flux cleaned = 0.000825093 Jy
! Total flux subtracted in 200 components = 0.000825093 Jy
! Clean residual min=-0.001578 max=0.001656 Jy/beam
! Clean residual mean=0.000001 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.262857 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 140 components and 0.262857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061168Jy  sigma=1.349365
! Fit after  self-cal, rms=0.061171Jy  sigma=1.349299
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (30, -42.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00092019 Jy
! Component: 100  -  total flux cleaned = 0.00131808 Jy
! Component: 150  -  total flux cleaned = 0.00147146 Jy
! Component: 200  -  total flux cleaned = 0.00158318 Jy
! Total flux subtracted in 200 components = 0.00158318 Jy
! Clean residual min=-0.001520 max=0.001504 Jy/beam
! Clean residual mean=0.000001 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.26444 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 156 components and 0.26444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061124Jy  sigma=1.348132
! Fit after  self-cal, rms=0.061120Jy  sigma=1.348083
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061120Jy  sigma=1.348083
! Fit after  self-cal, rms=0.061015Jy  sigma=1.348245
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.635 mas, bpa=-3.639 degrees
! Estimated noise=0.258014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000300882 Jy
! Component: 100  -  total flux cleaned = -0.000219588 Jy
! Component: 150  -  total flux cleaned = -0.000143993 Jy
! Component: 200  -  total flux cleaned = -7.47188e-05 Jy
! Total flux subtracted in 200 components = -7.47188e-05 Jy
! Clean residual min=-0.001458 max=0.001479 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.264365 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 163 components and 0.264365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060994Jy  sigma=1.347734
! Fit after  self-cal, rms=0.060993Jy  sigma=1.347709
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.2, 8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000577352 Jy
! Component: 100  -  total flux cleaned = 0.000427555 Jy
! Component: 150  -  total flux cleaned = 0.000219681 Jy
! Component: 200  -  total flux cleaned = 8.93514e-05 Jy
! Total flux subtracted in 200 components = 8.93514e-05 Jy
! Clean residual min=-0.001285 max=0.001379 Jy/beam
! Clean residual mean=0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.264455 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 176 components and 0.264455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060949Jy  sigma=1.346733
! Fit after  self-cal, rms=0.060947Jy  sigma=1.346697
! Inverting map 
! Added new window around map position (-6.8, -41.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000720143 Jy
! Component: 100  -  total flux cleaned = 0.000773706 Jy
! Component: 150  -  total flux cleaned = 0.000921957 Jy
! Component: 200  -  total flux cleaned = 0.00101407 Jy
! Total flux subtracted in 200 components = 0.00101407 Jy
! Clean residual min=-0.001258 max=0.001215 Jy/beam
! Clean residual mean=0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.265469 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 190 components and 0.265469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060919Jy  sigma=1.345973
! Fit after  self-cal, rms=0.060917Jy  sigma=1.345946
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060917Jy  sigma=1.345946
! Fit after  self-cal, rms=0.060748Jy  sigma=1.346002
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.277 mas, bmaj=2.66 mas, bpa=-2.092 degrees
! Estimated noise=0.316076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000287142 Jy
! Component: 100  -  total flux cleaned = -6.86614e-05 Jy
! Component: 150  -  total flux cleaned = 0.000142551 Jy
! Component: 200  -  total flux cleaned = 0.000254595 Jy
! Total flux subtracted in 200 components = 0.000254595 Jy
! Clean residual min=-0.001136 max=0.001170 Jy/beam
! Clean residual mean=0.000002 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.265724 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 214 components and 0.265724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060737Jy  sigma=1.345737
! Fit after  self-cal, rms=0.060734Jy  sigma=1.345700
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.4231e-05 Jy
! Component: 100  -  total flux cleaned = 4.23848e-05 Jy
! Component: 150  -  total flux cleaned = 9.09235e-05 Jy
! Component: 200  -  total flux cleaned = 0.00018225 Jy
! Total flux subtracted in 200 components = 0.00018225 Jy
! Clean residual min=-0.001122 max=0.001167 Jy/beam
! Clean residual mean=0.000002 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.265906 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 230 components and 0.265906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060729Jy  sigma=1.345579
! Fit after  self-cal, rms=0.060727Jy  sigma=1.345565
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.634 mas, bpa=-3.55 degrees
! Estimated noise=0.257175 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.078 x 1.634 at -3.55 degrees (North through East)
! Clean map  min=-0.0012294  max=0.16234 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8018 mas, bmaj=1.339 mas, bpa=-9.975 degrees
! Estimated noise=0.459031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119417 Jy
! Component: 100  -  total flux cleaned = 0.158154 Jy
! Component: 150  -  total flux cleaned = 0.179567 Jy
! Component: 200  -  total flux cleaned = 0.192894 Jy
! Total flux subtracted in 200 components = 0.192894 Jy
! Clean residual min=-0.005423 max=0.007424 Jy/beam
! Clean residual mean=-0.000015 rms=0.001414 Jy/beam
! Combined flux in latest and established models = 0.192894 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.192894 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.634 mas, bpa=-3.55 degrees
! Estimated noise=0.257175 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164357 Jy
! Component: 100  -  total flux cleaned = 0.0273943 Jy
! Component: 150  -  total flux cleaned = 0.035488 Jy
! Component: 200  -  total flux cleaned = 0.0416316 Jy
! Total flux subtracted in 200 components = 0.0416316 Jy
! Clean residual min=-0.002681 max=0.003980 Jy/beam
! Clean residual mean=-0.000012 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.234526 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 72 components and 0.234526 Jy
! Inverting map 
! Added new window around map position (-33.8, -22.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478321 Jy
! Component: 100  -  total flux cleaned = 0.00851857 Jy
! Component: 150  -  total flux cleaned = 0.0115918 Jy
! Component: 200  -  total flux cleaned = 0.0141543 Jy
! Total flux subtracted in 200 components = 0.0141543 Jy
! Clean residual min=-0.001989 max=0.002112 Jy/beam
! Clean residual mean=-0.000006 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.24868 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 102 components and 0.24868 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.277 mas, bmaj=2.66 mas, bpa=-2.092 degrees
! Estimated noise=0.316076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00356001 Jy
! Component: 100  -  total flux cleaned = 0.00600748 Jy
! Component: 150  -  total flux cleaned = 0.00800254 Jy
! Component: 200  -  total flux cleaned = 0.00967059 Jy
! Total flux subtracted in 200 components = 0.00967059 Jy
! Clean residual min=-0.001538 max=0.001899 Jy/beam
! Clean residual mean=-0.000003 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.258351 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-36.2, 20.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171058 Jy
! Component: 100  -  total flux cleaned = 0.00291974 Jy
! Component: 150  -  total flux cleaned = 0.00372143 Jy
! Component: 200  -  total flux cleaned = 0.00428392 Jy
! Total flux subtracted in 200 components = 0.00428392 Jy
! Clean residual min=-0.001321 max=0.001301 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.262635 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 170 components and 0.262635 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.634 mas, bpa=-3.55 degrees
! Estimated noise=0.257175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00010957 Jy
! Component: 100  -  total flux cleaned = 0.000155364 Jy
! Component: 150  -  total flux cleaned = 0.000240879 Jy
! Component: 200  -  total flux cleaned = 0.000321939 Jy
! Total flux subtracted in 200 components = 0.000321939 Jy
! Clean residual min=-0.001291 max=0.001423 Jy/beam
! Clean residual mean=-0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.262957 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 202 components and 0.262957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060799Jy  sigma=1.347133
! Fit after  self-cal, rms=0.060783Jy  sigma=1.346809
wmodel /scr/pima/bg219e_uvs/J0808+2646_X_map.mod
! Writing 202 model components to file: /scr/pima/bg219e_uvs/J0808+2646_X_map.mod
wobs /scr/pima/bg219e_uvs/J0808+2646_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0808+2646_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0808+2646_X_map.win
! wwins: Wrote 10 windows to /scr/pima/bg219e_uvs/J0808+2646_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000631567 Jy
! Component: 100  -  total flux cleaned = 0.000767112 Jy
! Component: 150  -  total flux cleaned = 0.000830359 Jy
! Component: 200  -  total flux cleaned = 0.00087084 Jy
! Component: 250  -  total flux cleaned = 0.00083193 Jy
! Component: 300  -  total flux cleaned = 0.000832196 Jy
! Component: 350  -  total flux cleaned = 0.000831909 Jy
! Component: 400  -  total flux cleaned = 0.000886022 Jy
! Component: 450  -  total flux cleaned = 0.000920735 Jy
! Component: 500  -  total flux cleaned = 0.000920721 Jy
! Component: 550  -  total flux cleaned = 0.000920611 Jy
! Component: 600  -  total flux cleaned = 0.0009369 Jy
! Component: 650  -  total flux cleaned = 0.000936654 Jy
! Component: 700  -  total flux cleaned = 0.000952856 Jy
! Component: 750  -  total flux cleaned = 0.000968549 Jy
! Component: 800  -  total flux cleaned = 0.000984092 Jy
! Component: 850  -  total flux cleaned = 0.00096876 Jy
! Component: 900  -  total flux cleaned = 0.000953713 Jy
! Component: 950  -  total flux cleaned = 0.000953534 Jy
! Component: 1000  -  total flux cleaned = 0.000924682 Jy
! Component: 1050  -  total flux cleaned = 0.000967954 Jy
! Component: 1100  -  total flux cleaned = 0.000968007 Jy
! Component: 1150  -  total flux cleaned = 0.000968217 Jy
! Component: 1200  -  total flux cleaned = 0.000981807 Jy
! Component: 1250  -  total flux cleaned = 0.000954993 Jy
! Component: 1300  -  total flux cleaned = 0.000968212 Jy
! Component: 1350  -  total flux cleaned = 0.000941959 Jy
! Component: 1400  -  total flux cleaned = 0.000902727 Jy
! Component: 1450  -  total flux cleaned = 0.000851112 Jy
! Component: 1500  -  total flux cleaned = 0.000838411 Jy
! Component: 1550  -  total flux cleaned = 0.000826029 Jy
! Component: 1600  -  total flux cleaned = 0.000813369 Jy
! Component: 1650  -  total flux cleaned = 0.000776429 Jy
! Component: 1700  -  total flux cleaned = 0.000703414 Jy
! Component: 1750  -  total flux cleaned = 0.000715646 Jy
! Component: 1800  -  total flux cleaned = 0.000643821 Jy
! Component: 1850  -  total flux cleaned = 0.000537662 Jy
! Component: 1900  -  total flux cleaned = 0.000490741 Jy
! Component: 1950  -  total flux cleaned = 0.00039824 Jy
! Component: 2000  -  total flux cleaned = 0.000375502 Jy
! Component: 2050  -  total flux cleaned = 0.000307264 Jy
! Component: 2100  -  total flux cleaned = 0.000228526 Jy
! Component: 2150  -  total flux cleaned = 0.000150718 Jy
! Component: 2200  -  total flux cleaned = 0.000106789 Jy
! Component: 2250  -  total flux cleaned = 5.22011e-05 Jy
! Component: 2300  -  total flux cleaned = 1.9535e-05 Jy
! Component: 2350  -  total flux cleaned = -8.77207e-05 Jy
! Component: 2400  -  total flux cleaned = -9.82913e-05 Jy
! Component: 2450  -  total flux cleaned = -0.000129904 Jy
! Component: 2500  -  total flux cleaned = -0.000213663 Jy
! Component: 2550  -  total flux cleaned = -0.000244742 Jy
! Component: 2600  -  total flux cleaned = -0.000306213 Jy
! Component: 2650  -  total flux cleaned = -0.000336843 Jy
! Component: 2700  -  total flux cleaned = -0.000427552 Jy
! Component: 2750  -  total flux cleaned = -0.000497494 Jy
! Component: 2800  -  total flux cleaned = -0.000527191 Jy
! Component: 2850  -  total flux cleaned = -0.000596034 Jy
! Component: 2900  -  total flux cleaned = -0.000625272 Jy
! Component: 2950  -  total flux cleaned = -0.000741347 Jy
! Component: 3000  -  total flux cleaned = -0.000769954 Jy
! Component: 3050  -  total flux cleaned = -0.000798664 Jy
! Component: 3100  -  total flux cleaned = -0.00081748 Jy
! Component: 3150  -  total flux cleaned = -0.000873788 Jy
! Component: 3200  -  total flux cleaned = -0.000901798 Jy
! Component: 3250  -  total flux cleaned = -0.00094797 Jy
! Component: 3300  -  total flux cleaned = -0.000966434 Jy
! Component: 3350  -  total flux cleaned = -0.00101192 Jy
! Component: 3400  -  total flux cleaned = -0.000993772 Jy
! Component: 3450  -  total flux cleaned = -0.00104775 Jy
! Component: 3500  -  total flux cleaned = -0.00106571 Jy
! Component: 3550  -  total flux cleaned = -0.00111003 Jy
! Component: 3600  -  total flux cleaned = -0.00115408 Jy
! Component: 3650  -  total flux cleaned = -0.00112778 Jy
! Component: 3700  -  total flux cleaned = -0.00115384 Jy
! Component: 3750  -  total flux cleaned = -0.00117114 Jy
! Component: 3800  -  total flux cleaned = -0.00120555 Jy
! Component: 3850  -  total flux cleaned = -0.00122256 Jy
! Component: 3900  -  total flux cleaned = -0.00124798 Jy
! Component: 3950  -  total flux cleaned = -0.00128165 Jy
! Component: 4000  -  total flux cleaned = -0.00131517 Jy
! Component: 4050  -  total flux cleaned = -0.00135688 Jy
! Total flux subtracted in 4096 components = -0.00135697 Jy
! Clean residual min=-0.000466 max=0.000492 Jy/beam
! Clean residual mean=-0.000001 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.2616 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 507 components and 0.2616 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0808+2646_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.078 x 1.634 at -3.55 degrees (North through East)
! Clean map  min=-0.00091519  max=0.16284 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0808+2646_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.162844 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000140031 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.257973 0.257973 0.515947 1.03189 2.06379 4.12757 8.25515 16.5103 33.0206 66.0412
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.162 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1162.91 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0808+2646_X_uvs.log closed on Thu Apr  7 09:02:28 2016