! Started logfile: /scr/pima/bg219e_uvs/J0750+1231_X_uvs.log on Thu Apr  7 09:02:14 2016
obs /scr/pima/bg219e_uvs/J0750+1231_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0750+1231_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.664352 visibilities/baseline/integration-bin.
! Found source: J0750+1231
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10332 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0750+1231_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=2.003741Jy  sigma=25.057361
! Fit after  self-cal, rms=0.815507Jy  sigma=9.836479
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9458 mas, bmaj=2.254 mas, bpa=21.28 degrees
! Estimated noise=1.33405 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.23273 Jy
! Component: 100  -  total flux cleaned = 1.54612 Jy
! Total flux subtracted in 100 components = 1.54612 Jy
! Clean residual min=-0.059072 max=0.140957 Jy/beam
! Clean residual mean=-0.000056 rms=0.015165 Jy/beam
! Combined flux in latest and established models = 1.54612 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.54612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.409434Jy  sigma=4.637432
! Fit after  self-cal, rms=0.407435Jy  sigma=4.613545
! Inverting map 
! Added new window around map position (1.2, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.166102 Jy
! Component: 100  -  total flux cleaned = 0.264233 Jy
! Total flux subtracted in 100 components = 0.264233 Jy
! Clean residual min=-0.039121 max=0.052790 Jy/beam
! Clean residual mean=-0.000031 rms=0.008995 Jy/beam
! Combined flux in latest and established models = 1.81036 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 16 components and 1.81036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.275810Jy  sigma=3.001175
! Fit after  self-cal, rms=0.272663Jy  sigma=2.945535
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0719536 Jy
! Component: 100  -  total flux cleaned = 0.117925 Jy
! Total flux subtracted in 100 components = 0.117925 Jy
! Clean residual min=-0.030578 max=0.041052 Jy/beam
! Clean residual mean=-0.000017 rms=0.006834 Jy/beam
! Combined flux in latest and established models = 1.92828 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 1.92828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.234989Jy  sigma=2.480817
! Fit after  self-cal, rms=0.234028Jy  sigma=2.461448
! Inverting map 
! Added new window around map position (3.8, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0442258 Jy
! Component: 100  -  total flux cleaned = 0.0760632 Jy
! Total flux subtracted in 100 components = 0.0760632 Jy
! Clean residual min=-0.023492 max=0.026391 Jy/beam
! Clean residual mean=-0.000013 rms=0.005647 Jy/beam
! Combined flux in latest and established models = 2.00435 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 2.00434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.216263Jy  sigma=2.251055
! Fit after  self-cal, rms=0.215241Jy  sigma=2.240197
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.134 mas, bmaj=2.461 mas, bpa=21.33 degrees
! Estimated noise=1.06815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0463532 Jy
! Component: 100  -  total flux cleaned = 0.0802777 Jy
! Component: 150  -  total flux cleaned = 0.106782 Jy
! Component: 200  -  total flux cleaned = 0.127862 Jy
! Total flux subtracted in 200 components = 0.127862 Jy
! Clean residual min=-0.018660 max=0.021508 Jy/beam
! Clean residual mean=-0.000006 rms=0.005034 Jy/beam
! Combined flux in latest and established models = 2.13221 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 81 components and 2.13221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.197686Jy  sigma=2.031247
! Fit after  self-cal, rms=0.196642Jy  sigma=2.017894
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.134 x 2.461 at 21.33 degrees (North through East)
! Clean map  min=-0.017722  max=1.6447 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        0.97     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.99     KP        0.98     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.00     KP        0.97     
!   LA        0.97     NL        0.98     OV        1.00     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.97     NL        1.01     OV        1.01     PT        0.98     
!   SC        1.02     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.98     KP        0.96     
!   LA        0.99     NL        0.99     OV        1.00     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        0.97     
!   LA        0.97     NL        1.00     OV        0.99     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        0.97     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.02     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.196642Jy  sigma=2.017894
! Fit after  self-cal, rms=0.187516Jy  sigma=1.918018
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.137 mas, bmaj=2.457 mas, bpa=21.16 degrees
! Estimated noise=1.06142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160974 Jy
! Component: 100  -  total flux cleaned = 0.0234792 Jy
! Component: 150  -  total flux cleaned = 0.0274745 Jy
! Component: 200  -  total flux cleaned = 0.0291152 Jy
! Total flux subtracted in 200 components = 0.0291152 Jy
! Clean residual min=-0.013485 max=0.014628 Jy/beam
! Clean residual mean=0.000004 rms=0.003508 Jy/beam
! Combined flux in latest and established models = 2.16132 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 98 components and 2.16132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.185283Jy  sigma=1.894589
! Fit after  self-cal, rms=0.185136Jy  sigma=1.892092
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.185136Jy  sigma=1.892092
! Fit after  self-cal, rms=0.181497Jy  sigma=1.823166
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.135 mas, bmaj=2.452 mas, bpa=21.23 degrees
! Estimated noise=1.06165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00155416 Jy
! Component: 100  -  total flux cleaned = -0.000148671 Jy
! Component: 150  -  total flux cleaned = 0.00142132 Jy
! Component: 200  -  total flux cleaned = 0.00289439 Jy
! Total flux subtracted in 200 components = 0.00289439 Jy
! Clean residual min=-0.011780 max=0.013419 Jy/beam
! Clean residual mean=0.000008 rms=0.002850 Jy/beam
! Combined flux in latest and established models = 2.16422 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 112 components and 2.16422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.180546Jy  sigma=1.813871
! Fit after  self-cal, rms=0.180442Jy  sigma=1.812706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.8, 43).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113122 Jy
! Component: 100  -  total flux cleaned = 0.0140273 Jy
! Component: 150  -  total flux cleaned = 0.0162315 Jy
! Component: 200  -  total flux cleaned = 0.0179041 Jy
! Total flux subtracted in 200 components = 0.0179041 Jy
! Clean residual min=-0.010991 max=0.011407 Jy/beam
! Clean residual mean=0.000004 rms=0.002598 Jy/beam
! Combined flux in latest and established models = 2.18212 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 136 components and 2.18212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.179067Jy  sigma=1.796407
! Fit after  self-cal, rms=0.178984Jy  sigma=1.795004
! Inverting map 
! Added new window around map position (6.6, -11.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00916261 Jy
! Component: 100  -  total flux cleaned = 0.0118955 Jy
! Component: 150  -  total flux cleaned = 0.0129282 Jy
! Component: 200  -  total flux cleaned = 0.0141123 Jy
! Total flux subtracted in 200 components = 0.0141123 Jy
! Clean residual min=-0.010783 max=0.009617 Jy/beam
! Clean residual mean=0.000005 rms=0.002393 Jy/beam
! Combined flux in latest and established models = 2.19623 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 161 components and 2.19623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.177936Jy  sigma=1.781337
! Fit after  self-cal, rms=0.177885Jy  sigma=1.780534
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.177885Jy  sigma=1.780534
! Fit after  self-cal, rms=0.175231Jy  sigma=1.732324
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.136 mas, bmaj=2.451 mas, bpa=21.25 degrees
! Estimated noise=1.0611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000450979 Jy
! Component: 100  -  total flux cleaned = 0.00059722 Jy
! Component: 150  -  total flux cleaned = 0.00196101 Jy
! Component: 200  -  total flux cleaned = 0.00291329 Jy
! Total flux subtracted in 200 components = 0.00291329 Jy
! Clean residual min=-0.006828 max=0.008547 Jy/beam
! Clean residual mean=-0.000000 rms=0.001748 Jy/beam
! Combined flux in latest and established models = 2.19915 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 180 components and 2.19915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.174831Jy  sigma=1.728563
! Fit after  self-cal, rms=0.174800Jy  sigma=1.728296
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.8, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00752679 Jy
! Component: 100  -  total flux cleaned = 0.00934395 Jy
! Component: 150  -  total flux cleaned = 0.0107354 Jy
! Component: 200  -  total flux cleaned = 0.0121059 Jy
! Total flux subtracted in 200 components = 0.0121059 Jy
! Clean residual min=-0.006869 max=0.006548 Jy/beam
! Clean residual mean=0.000002 rms=0.001609 Jy/beam
! Combined flux in latest and established models = 2.21125 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 200 components and 2.21125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.174280Jy  sigma=1.723334
! Fit after  self-cal, rms=0.174228Jy  sigma=1.722699
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.174228Jy  sigma=1.722699
! Fit after  self-cal, rms=0.173903Jy  sigma=1.721537
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.175 mas, bmaj=2.932 mas, bpa=8.393 degrees
! Estimated noise=1.33658 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137067 Jy
! Component: 100  -  total flux cleaned = 0.00280196 Jy
! Component: 150  -  total flux cleaned = 0.00434891 Jy
! Component: 200  -  total flux cleaned = 0.00545713 Jy
! Total flux subtracted in 200 components = 0.00545713 Jy
! Clean residual min=-0.007459 max=0.007696 Jy/beam
! Clean residual mean=0.000007 rms=0.002137 Jy/beam
! Combined flux in latest and established models = 2.21671 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 217 components and 2.21671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.173624Jy  sigma=1.720517
! Fit after  self-cal, rms=0.173595Jy  sigma=1.720196
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536514 Jy
! Component: 100  -  total flux cleaned = 0.00162365 Jy
! Component: 150  -  total flux cleaned = 0.00213974 Jy
! Component: 200  -  total flux cleaned = 0.00253682 Jy
! Total flux subtracted in 200 components = 0.00253682 Jy
! Clean residual min=-0.007206 max=0.007487 Jy/beam
! Clean residual mean=0.000007 rms=0.002053 Jy/beam
! Combined flux in latest and established models = 2.21925 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 231 components and 2.21925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.173492Jy  sigma=1.720068
! Fit after  self-cal, rms=0.173481Jy  sigma=1.719965
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.136 mas, bmaj=2.452 mas, bpa=21.25 degrees
! Estimated noise=1.06056 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.136 x 2.452 at 21.25 degrees (North through East)
! Clean map  min=-0.0062092  max=1.6293 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.173481Jy  sigma=1.719965
! Fit after  self-cal, rms=0.163502Jy  sigma=1.526889
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=2.458 mas, bpa=21.31 degrees
! Estimated noise=1.05249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0148306 Jy
! Component: 100  -  total flux cleaned = -0.0243276 Jy
! Component: 150  -  total flux cleaned = -0.0301465 Jy
! Component: 200  -  total flux cleaned = -0.0325198 Jy
! Total flux subtracted in 200 components = -0.0325198 Jy
! Clean residual min=-0.009991 max=0.008288 Jy/beam
! Clean residual mean=0.000022 rms=0.002592 Jy/beam
! Combined flux in latest and established models = 2.18673 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 255 components and 2.18673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.160938Jy  sigma=1.505813
! Fit after  self-cal, rms=0.160929Jy  sigma=1.505229
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00259246 Jy
! Component: 100  -  total flux cleaned = -0.00296981 Jy
! Component: 150  -  total flux cleaned = -0.00279145 Jy
! Component: 200  -  total flux cleaned = -0.0032652 Jy
! Total flux subtracted in 200 components = -0.0032652 Jy
! Clean residual min=-0.009173 max=0.008032 Jy/beam
! Clean residual mean=0.000020 rms=0.002437 Jy/beam
! Combined flux in latest and established models = 2.18346 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 270 components and 2.18346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.160339Jy  sigma=1.501324
! Fit after  self-cal, rms=0.160346Jy  sigma=1.501086
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.160346Jy  sigma=1.501086
! Fit after  self-cal, rms=0.158821Jy  sigma=1.484752
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9481 mas, bmaj=2.252 mas, bpa=21.29 degrees
! Estimated noise=1.31192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.20908 Jy
! Component: 100  -  total flux cleaned = 1.52878 Jy
! Component: 150  -  total flux cleaned = 1.69324 Jy
! Component: 200  -  total flux cleaned = 1.79031 Jy
! Total flux subtracted in 200 components = 1.79031 Jy
! Clean residual min=-0.024021 max=0.050620 Jy/beam
! Clean residual mean=-0.000013 rms=0.006690 Jy/beam
! Combined flux in latest and established models = 1.79031 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 1.79031 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=2.461 mas, bpa=21.33 degrees
! Estimated noise=1.04482 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0874589 Jy
! Component: 100  -  total flux cleaned = 0.145403 Jy
! Component: 150  -  total flux cleaned = 0.186163 Jy
! Component: 200  -  total flux cleaned = 0.215821 Jy
! Total flux subtracted in 200 components = 0.215821 Jy
! Clean residual min=-0.015469 max=0.017527 Jy/beam
! Clean residual mean=-0.000002 rms=0.004400 Jy/beam
! Combined flux in latest and established models = 2.00613 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 2.00613 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.188 mas, bmaj=2.945 mas, bpa=8.462 degrees
! Estimated noise=1.30983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0338451 Jy
! Component: 100  -  total flux cleaned = 0.0566813 Jy
! Component: 150  -  total flux cleaned = 0.0725651 Jy
! Component: 200  -  total flux cleaned = 0.0833993 Jy
! Total flux subtracted in 200 components = 0.0833993 Jy
! Clean residual min=-0.015521 max=0.019411 Jy/beam
! Clean residual mean=0.000022 rms=0.005082 Jy/beam
! Combined flux in latest and established models = 2.08953 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00828463 Jy
! Component: 100  -  total flux cleaned = 0.0155401 Jy
! Component: 150  -  total flux cleaned = 0.0219393 Jy
! Component: 200  -  total flux cleaned = 0.0279398 Jy
! Total flux subtracted in 200 components = 0.0279398 Jy
! Clean residual min=-0.014370 max=0.015094 Jy/beam
! Clean residual mean=0.000025 rms=0.004355 Jy/beam
! Combined flux in latest and established models = 2.11747 Jy
! Adding 123 model components to the UV plane model.
! The established model now contains 152 components and 2.11747 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=2.461 mas, bpa=21.33 degrees
! Estimated noise=1.04482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568327 Jy
! Component: 100  -  total flux cleaned = 0.00933135 Jy
! Component: 150  -  total flux cleaned = 0.0113267 Jy
! Component: 200  -  total flux cleaned = 0.0126897 Jy
! Total flux subtracted in 200 components = 0.0126897 Jy
! Clean residual min=-0.009832 max=0.009861 Jy/beam
! Clean residual mean=0.000013 rms=0.002636 Jy/beam
! Combined flux in latest and established models = 2.13016 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 180 components and 2.13016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.157667Jy  sigma=1.491490
! Fit after  self-cal, rms=0.157497Jy  sigma=1.486616
wmodel /scr/pima/bg219e_uvs/J0750+1231_X_map.mod
! Writing 180 model components to file: /scr/pima/bg219e_uvs/J0750+1231_X_map.mod
wobs /scr/pima/bg219e_uvs/J0750+1231_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0750+1231_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0750+1231_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219e_uvs/J0750+1231_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00154319 Jy
! Component: 100  -  total flux cleaned = -0.00302982 Jy
! Component: 150  -  total flux cleaned = -0.00442452 Jy
! Component: 200  -  total flux cleaned = -0.00575867 Jy
! Component: 250  -  total flux cleaned = -0.00718674 Jy
! Component: 300  -  total flux cleaned = -0.00843264 Jy
! Component: 350  -  total flux cleaned = -0.00990573 Jy
! Component: 400  -  total flux cleaned = -0.0112028 Jy
! Component: 450  -  total flux cleaned = -0.0122123 Jy
! Component: 500  -  total flux cleaned = -0.0131955 Jy
! Component: 550  -  total flux cleaned = -0.0142709 Jy
! Component: 600  -  total flux cleaned = -0.01532 Jy
! Component: 650  -  total flux cleaned = -0.0164587 Jy
! Component: 700  -  total flux cleaned = -0.0174624 Jy
! Component: 750  -  total flux cleaned = -0.0183345 Jy
! Component: 800  -  total flux cleaned = -0.0196079 Jy
! Component: 850  -  total flux cleaned = -0.0201288 Jy
! Component: 900  -  total flux cleaned = -0.0210468 Jy
! Component: 950  -  total flux cleaned = -0.0220406 Jy
! Component: 1000  -  total flux cleaned = -0.0225291 Jy
! Component: 1050  -  total flux cleaned = -0.0237677 Jy
! Component: 1100  -  total flux cleaned = -0.0242338 Jy
! Component: 1150  -  total flux cleaned = -0.0249663 Jy
! Component: 1200  -  total flux cleaned = -0.0257738 Jy
! Component: 1250  -  total flux cleaned = -0.0260377 Jy
! Component: 1300  -  total flux cleaned = -0.0267304 Jy
! Component: 1350  -  total flux cleaned = -0.0269841 Jy
! Component: 1400  -  total flux cleaned = -0.0276514 Jy
! Component: 1450  -  total flux cleaned = -0.028224 Jy
! Component: 1500  -  total flux cleaned = -0.0289472 Jy
! Component: 1550  -  total flux cleaned = -0.0292633 Jy
! Component: 1600  -  total flux cleaned = -0.0297305 Jy
! Component: 1650  -  total flux cleaned = -0.0304198 Jy
! Component: 1700  -  total flux cleaned = -0.0308698 Jy
! Component: 1750  -  total flux cleaned = -0.0314614 Jy
! Component: 1800  -  total flux cleaned = -0.0317531 Jy
! Component: 1850  -  total flux cleaned = -0.0321115 Jy
! Component: 1900  -  total flux cleaned = -0.032747 Jy
! Component: 1950  -  total flux cleaned = -0.0330257 Jy
! Component: 2000  -  total flux cleaned = -0.0334366 Jy
! Component: 2050  -  total flux cleaned = -0.0339069 Jy
! Component: 2100  -  total flux cleaned = -0.0343713 Jy
! Component: 2150  -  total flux cleaned = -0.0348931 Jy
! Component: 2200  -  total flux cleaned = -0.0352141 Jy
! Component: 2250  -  total flux cleaned = -0.0357196 Jy
! Component: 2300  -  total flux cleaned = -0.0359075 Jy
! Component: 2350  -  total flux cleaned = -0.0362762 Jy
! Component: 2400  -  total flux cleaned = -0.0365201 Jy
! Component: 2450  -  total flux cleaned = -0.036999 Jy
! Component: 2500  -  total flux cleaned = -0.037295 Jy
! Component: 2550  -  total flux cleaned = -0.0375288 Jy
! Component: 2600  -  total flux cleaned = -0.0381622 Jy
! Component: 2650  -  total flux cleaned = -0.0383325 Jy
! Component: 2700  -  total flux cleaned = -0.0386688 Jy
! Component: 2750  -  total flux cleaned = -0.0388349 Jy
! Component: 2800  -  total flux cleaned = -0.039216 Jy
! Component: 2850  -  total flux cleaned = -0.039594 Jy
! Component: 2900  -  total flux cleaned = -0.0398071 Jy
! Component: 2950  -  total flux cleaned = -0.0399642 Jy
! Component: 3000  -  total flux cleaned = -0.0403295 Jy
! Component: 3050  -  total flux cleaned = -0.040484 Jy
! Component: 3100  -  total flux cleaned = -0.0406354 Jy
! Component: 3150  -  total flux cleaned = -0.0407864 Jy
! Component: 3200  -  total flux cleaned = -0.0409844 Jy
! Component: 3250  -  total flux cleaned = -0.0409844 Jy
! Component: 3300  -  total flux cleaned = -0.0411786 Jy
! Component: 3350  -  total flux cleaned = -0.0412264 Jy
! Component: 3400  -  total flux cleaned = -0.0413684 Jy
! Component: 3450  -  total flux cleaned = -0.0415087 Jy
! Component: 3500  -  total flux cleaned = -0.0416009 Jy
! Component: 3550  -  total flux cleaned = -0.0416935 Jy
! Component: 3600  -  total flux cleaned = -0.0418757 Jy
! Component: 3650  -  total flux cleaned = -0.0419199 Jy
! Component: 3700  -  total flux cleaned = -0.0420536 Jy
! Component: 3750  -  total flux cleaned = -0.0420975 Jy
! Component: 3800  -  total flux cleaned = -0.0420982 Jy
! Component: 3850  -  total flux cleaned = -0.0422274 Jy
! Component: 3900  -  total flux cleaned = -0.0423977 Jy
! Component: 3950  -  total flux cleaned = -0.0422717 Jy
! Component: 4000  -  total flux cleaned = -0.0424384 Jy
! Component: 4050  -  total flux cleaned = -0.0424384 Jy
! Total flux subtracted in 4096 components = -0.0423975 Jy
! Clean residual min=-0.002133 max=0.002557 Jy/beam
! Clean residual mean=0.000004 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 2.08776 Jy
keep
! Adding 388 model components to the UV plane model.
! The established model now contains 566 components and 2.08776 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0750+1231_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.138 x 2.461 at 21.33 degrees (North through East)
! Clean map  min=-0.0082397  max=1.6136 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0750+1231_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.61364 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000779342 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.144891 0.144891 0.289783 0.579566 1.15913 2.31826 4.63653 9.27306 18.5461 37.0922 74.1844
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.613 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2070.51 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0750+1231_X_uvs.log closed on Thu Apr  7 09:02:19 2016