! Started logfile: /scr/pima/bg219e_uvs/J0730-1141_X_dfm.log on Thu May 19 18:28:20 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0730-1141_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0730-1141_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.873016 visibilities/baseline/integration-bin.
! Found source: J0730-1141
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5280 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0730-1141_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=4.618284Jy  sigma=35.422027
! Fit after  self-cal, rms=3.534745Jy  sigma=26.816242
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8082 mas, bmaj=2.88 mas, bpa=21.23 degrees
! Estimated noise=2.84192 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.42193 Jy
! Component: 100  -  total flux cleaned = 4.16814 Jy
! Total flux subtracted in 100 components = 4.16814 Jy
! Clean residual min=-0.089026 max=0.208113 Jy/beam
! Clean residual mean=-0.000164 rms=0.022895 Jy/beam
! Combined flux in latest and established models = 4.16814 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 4.16814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.518798Jy  sigma=3.559248
! Fit after  self-cal, rms=0.518395Jy  sigma=3.558633
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.206406 Jy
! Component: 100  -  total flux cleaned = 0.320472 Jy
! Total flux subtracted in 100 components = 0.320472 Jy
! Clean residual min=-0.054939 max=0.071350 Jy/beam
! Clean residual mean=-0.000096 rms=0.013632 Jy/beam
! Combined flux in latest and established models = 4.48861 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 4.48861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.355279Jy  sigma=2.353441
! Fit after  self-cal, rms=0.354989Jy  sigma=2.351410
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=3.151 mas, bpa=20.46 degrees
! Estimated noise=2.20393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136729 Jy
! Component: 100  -  total flux cleaned = 0.225431 Jy
! Component: 150  -  total flux cleaned = 0.289053 Jy
! Component: 200  -  total flux cleaned = 0.335614 Jy
! Total flux subtracted in 200 components = 0.335614 Jy
! Clean residual min=-0.041169 max=0.066212 Jy/beam
! Clean residual mean=0.000022 rms=0.011146 Jy/beam
! Combined flux in latest and established models = 4.82422 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 69 components and 4.82422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.270436Jy  sigma=1.804549
! Fit after  self-cal, rms=0.269883Jy  sigma=1.797944
! Inverting map 
! Added new window around map position (-2.2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0633431 Jy
! Component: 100  -  total flux cleaned = 0.0997319 Jy
! Component: 150  -  total flux cleaned = 0.128197 Jy
! Component: 200  -  total flux cleaned = 0.149142 Jy
! Total flux subtracted in 200 components = 0.149142 Jy
! Clean residual min=-0.034069 max=0.046323 Jy/beam
! Clean residual mean=0.000017 rms=0.008538 Jy/beam
! Combined flux in latest and established models = 4.97336 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 104 components and 4.97336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.246596Jy  sigma=1.692580
! Fit after  self-cal, rms=0.244248Jy  sigma=1.672436
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.005 x 3.151 at 20.46 degrees (North through East)
! Clean map  min=-0.031627  max=4.4382 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.05     KP        1.00     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        1.00     
!   LA        0.99     NL        0.98     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        1.00     NL        1.02     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        1.02     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        1.01     
!   LA        0.97     NL        0.99     OV        1.00     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.98     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.98     KP        1.01     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.02     
!   LA        0.98     NL        1.01     OV        1.01     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        1.00     
!   LA        0.99     NL        1.00     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.244248Jy  sigma=1.672436
! Fit after  self-cal, rms=0.240977Jy  sigma=1.576175
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=3.158 mas, bpa=20.47 degrees
! Estimated noise=2.19927 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180965 Jy
! Component: 100  -  total flux cleaned = 0.0212453 Jy
! Component: 150  -  total flux cleaned = 0.0238475 Jy
! Component: 200  -  total flux cleaned = 0.0260894 Jy
! Total flux subtracted in 200 components = 0.0260894 Jy
! Clean residual min=-0.024649 max=0.030577 Jy/beam
! Clean residual mean=-0.000001 rms=0.006740 Jy/beam
! Combined flux in latest and established models = 4.99945 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 119 components and 4.99945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.237360Jy  sigma=1.558842
! Fit after  self-cal, rms=0.237202Jy  sigma=1.556287
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.237202Jy  sigma=1.556287
! Fit after  self-cal, rms=0.217695Jy  sigma=1.442292
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=3.156 mas, bpa=20.43 degrees
! Estimated noise=2.19763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00623049 Jy
! Component: 100  -  total flux cleaned = 0.0106522 Jy
! Component: 150  -  total flux cleaned = 0.0119242 Jy
! Component: 200  -  total flux cleaned = 0.0130761 Jy
! Total flux subtracted in 200 components = 0.0130761 Jy
! Clean residual min=-0.018785 max=0.018913 Jy/beam
! Clean residual mean=-0.000033 rms=0.004158 Jy/beam
! Combined flux in latest and established models = 5.01253 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 132 components and 5.01253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.216829Jy  sigma=1.438711
! Fit after  self-cal, rms=0.216722Jy  sigma=1.438342
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.8, -23.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00381578 Jy
! Component: 100  -  total flux cleaned = 0.00372329 Jy
! Component: 150  -  total flux cleaned = 0.00371468 Jy
! Component: 200  -  total flux cleaned = 0.00546636 Jy
! Total flux subtracted in 200 components = 0.00546636 Jy
! Clean residual min=-0.014112 max=0.015662 Jy/beam
! Clean residual mean=-0.000033 rms=0.003669 Jy/beam
! Combined flux in latest and established models = 5.01799 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 155 components and 5.01799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.213909Jy  sigma=1.425476
! Fit after  self-cal, rms=0.213816Jy  sigma=1.423483
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.213816Jy  sigma=1.423483
! Fit after  self-cal, rms=0.210849Jy  sigma=1.407269
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=3.158 mas, bpa=20.42 degrees
! Estimated noise=2.19769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.23895e-05 Jy
! Component: 100  -  total flux cleaned = 0.00199011 Jy
! Component: 150  -  total flux cleaned = 0.00376917 Jy
! Component: 200  -  total flux cleaned = 0.00430773 Jy
! Total flux subtracted in 200 components = 0.00430773 Jy
! Clean residual min=-0.012577 max=0.014648 Jy/beam
! Clean residual mean=-0.000048 rms=0.002992 Jy/beam
! Combined flux in latest and established models = 5.0223 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 171 components and 5.0223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.209804Jy  sigma=1.402124
! Fit after  self-cal, rms=0.209740Jy  sigma=1.401858
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14, -33.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00819375 Jy
! Component: 100  -  total flux cleaned = 0.0132715 Jy
! Component: 150  -  total flux cleaned = 0.0172319 Jy
! Component: 200  -  total flux cleaned = 0.0190406 Jy
! Total flux subtracted in 200 components = 0.0190406 Jy
! Clean residual min=-0.010843 max=0.012589 Jy/beam
! Clean residual mean=-0.000046 rms=0.002716 Jy/beam
! Combined flux in latest and established models = 5.04134 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 192 components and 5.04134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.208536Jy  sigma=1.397122
! Fit after  self-cal, rms=0.208479Jy  sigma=1.396460
! Inverting map 
! Added new window around map position (23.2, 21.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104585 Jy
! Component: 100  -  total flux cleaned = 0.0138528 Jy
! Component: 150  -  total flux cleaned = 0.0172567 Jy
! Component: 200  -  total flux cleaned = 0.0199324 Jy
! Total flux subtracted in 200 components = 0.0199324 Jy
! Clean residual min=-0.009993 max=0.010559 Jy/beam
! Clean residual mean=-0.000038 rms=0.002427 Jy/beam
! Combined flux in latest and established models = 5.06127 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 214 components and 5.06127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.207465Jy  sigma=1.392903
! Fit after  self-cal, rms=0.207389Jy  sigma=1.392462
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.207389Jy  sigma=1.392462
! Fit after  self-cal, rms=0.206279Jy  sigma=1.389656
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.054 mas, bmaj=4.111 mas, bpa=11.79 degrees
! Estimated noise=2.77954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00535149 Jy
! Component: 100  -  total flux cleaned = 0.00948233 Jy
! Component: 150  -  total flux cleaned = 0.0132694 Jy
! Component: 200  -  total flux cleaned = 0.0161165 Jy
! Total flux subtracted in 200 components = 0.0161165 Jy
! Clean residual min=-0.011659 max=0.012126 Jy/beam
! Clean residual mean=-0.000066 rms=0.003114 Jy/beam
! Combined flux in latest and established models = 5.07739 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 235 components and 5.07739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.205847Jy  sigma=1.388326
! Fit after  self-cal, rms=0.205829Jy  sigma=1.388063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00339189 Jy
! Component: 100  -  total flux cleaned = 0.00524056 Jy
! Component: 150  -  total flux cleaned = 0.00680996 Jy
! Component: 200  -  total flux cleaned = 0.00801061 Jy
! Total flux subtracted in 200 components = 0.00801061 Jy
! Clean residual min=-0.011436 max=0.011850 Jy/beam
! Clean residual mean=-0.000063 rms=0.003015 Jy/beam
! Combined flux in latest and established models = 5.0854 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 249 components and 5.0854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.205642Jy  sigma=1.387592
! Fit after  self-cal, rms=0.205637Jy  sigma=1.387494
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=3.158 mas, bpa=20.42 degrees
! Estimated noise=2.19637 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.005 x 3.158 at 20.42 degrees (North through East)
! Clean map  min=-0.018217  max=4.4289 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.205637Jy  sigma=1.387494
! Fit after  self-cal, rms=0.126288Jy  sigma=0.568802
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=3.159 mas, bpa=20.42 degrees
! Estimated noise=2.19684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128023 Jy
! Component: 100  -  total flux cleaned = 0.00378631 Jy
! Component: 150  -  total flux cleaned = 0.00713764 Jy
! Component: 200  -  total flux cleaned = 0.00766196 Jy
! Total flux subtracted in 200 components = 0.00766196 Jy
! Clean residual min=-0.008125 max=0.010590 Jy/beam
! Clean residual mean=-0.000035 rms=0.002200 Jy/beam
! Combined flux in latest and established models = 5.09306 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 273 components and 5.09306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.123923Jy  sigma=0.554823
! Fit after  self-cal, rms=0.123852Jy  sigma=0.553800
! Inverting map 
! Added new window around map position (5.4, 27.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106566 Jy
! Component: 100  -  total flux cleaned = 0.0159925 Jy
! Component: 150  -  total flux cleaned = 0.0198089 Jy
! Component: 200  -  total flux cleaned = 0.0235063 Jy
! Total flux subtracted in 200 components = 0.0235063 Jy
! Clean residual min=-0.007053 max=0.008419 Jy/beam
! Clean residual mean=-0.000032 rms=0.001867 Jy/beam
! Combined flux in latest and established models = 5.11656 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 300 components and 5.11656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122028Jy  sigma=0.545328
! Fit after  self-cal, rms=0.121861Jy  sigma=0.544313
! Inverting map 
! Added new window around map position (36.8, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00812281 Jy
! Component: 100  -  total flux cleaned = 0.0129081 Jy
! Component: 150  -  total flux cleaned = 0.0165834 Jy
! Component: 200  -  total flux cleaned = 0.0198007 Jy
! Total flux subtracted in 200 components = 0.0198007 Jy
! Clean residual min=-0.006548 max=0.007096 Jy/beam
! Clean residual mean=-0.000025 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 5.13636 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 325 components and 5.13636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.120697Jy  sigma=0.539133
! Fit after  self-cal, rms=0.120592Jy  sigma=0.538589
! Inverting map 
! Added new window around map position (-16.6, 30).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00564391 Jy
! Component: 100  -  total flux cleaned = 0.00794293 Jy
! Component: 150  -  total flux cleaned = 0.00989771 Jy
! Component: 200  -  total flux cleaned = 0.0115651 Jy
! Total flux subtracted in 200 components = 0.0115651 Jy
! Clean residual min=-0.005849 max=0.005418 Jy/beam
! Clean residual mean=-0.000022 rms=0.001421 Jy/beam
! Combined flux in latest and established models = 5.14793 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 346 components and 5.14793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119851Jy  sigma=0.534786
! Fit after  self-cal, rms=0.119767Jy  sigma=0.534347
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119767Jy  sigma=0.534347
! Fit after  self-cal, rms=0.117813Jy  sigma=0.522589
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8062 mas, bmaj=2.889 mas, bpa=21.17 degrees
! Estimated noise=2.83798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.41712 Jy
! Component: 100  -  total flux cleaned = 4.16246 Jy
! Component: 150  -  total flux cleaned = 4.37929 Jy
! Component: 200  -  total flux cleaned = 4.49966 Jy
! Total flux subtracted in 200 components = 4.49966 Jy
! Clean residual min=-0.040381 max=0.063340 Jy/beam
! Clean residual mean=-0.000105 rms=0.010263 Jy/beam
! Combined flux in latest and established models = 4.49966 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 4.49966 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=3.16 mas, bpa=20.42 degrees
! Estimated noise=2.19625 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119752 Jy
! Component: 100  -  total flux cleaned = 0.196413 Jy
! Component: 150  -  total flux cleaned = 0.253083 Jy
! Component: 200  -  total flux cleaned = 0.296782 Jy
! Total flux subtracted in 200 components = 0.296782 Jy
! Clean residual min=-0.021304 max=0.031998 Jy/beam
! Clean residual mean=-0.000045 rms=0.006507 Jy/beam
! Combined flux in latest and established models = 4.79644 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 75 components and 4.79644 Jy
! Inverting map 
! Added new window around map position (6, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0356882 Jy
! Component: 100  -  total flux cleaned = 0.0636822 Jy
! Component: 150  -  total flux cleaned = 0.0871166 Jy
! Component: 200  -  total flux cleaned = 0.10731 Jy
! Total flux subtracted in 200 components = 0.10731 Jy
! Clean residual min=-0.017964 max=0.016171 Jy/beam
! Clean residual mean=-0.000049 rms=0.004287 Jy/beam
! Combined flux in latest and established models = 4.90375 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 119 components and 4.90375 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.055 mas, bmaj=4.116 mas, bpa=11.74 degrees
! Estimated noise=2.77828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0281583 Jy
! Component: 100  -  total flux cleaned = 0.0491617 Jy
! Component: 150  -  total flux cleaned = 0.0662329 Jy
! Component: 200  -  total flux cleaned = 0.0807603 Jy
! Total flux subtracted in 200 components = 0.0807603 Jy
! Clean residual min=-0.014950 max=0.014926 Jy/beam
! Clean residual mean=-0.000092 rms=0.004379 Jy/beam
! Combined flux in latest and established models = 4.98451 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128527 Jy
! Component: 100  -  total flux cleaned = 0.0244504 Jy
! Component: 150  -  total flux cleaned = 0.0333353 Jy
! Component: 200  -  total flux cleaned = 0.041536 Jy
! Total flux subtracted in 200 components = 0.041536 Jy
! Clean residual min=-0.012535 max=0.012890 Jy/beam
! Clean residual mean=-0.000084 rms=0.003552 Jy/beam
! Combined flux in latest and established models = 5.02605 Jy
! Adding 131 model components to the UV plane model.
! The established model now contains 230 components and 5.02605 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=3.16 mas, bpa=20.42 degrees
! Estimated noise=2.19625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443186 Jy
! Component: 100  -  total flux cleaned = 0.00801204 Jy
! Component: 150  -  total flux cleaned = 0.011611 Jy
! Component: 200  -  total flux cleaned = 0.0152619 Jy
! Total flux subtracted in 200 components = 0.0152619 Jy
! Clean residual min=-0.011296 max=0.009720 Jy/beam
! Clean residual mean=-0.000041 rms=0.002364 Jy/beam
! Combined flux in latest and established models = 5.04131 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 258 components and 5.04131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121904Jy  sigma=0.554137
! Fit after  self-cal, rms=0.121648Jy  sigma=0.547392
wmodel /J0730-1141_X_map.mod
! wmodel: Unable to open new model file: /J0730-1141_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0730-1141_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.004 x 3.16 at 20.42 degrees (North through East)
! Clean map  min=-0.010103  max=4.4349 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0730-1141_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 4.43486 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00223802 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.151393 0.151393 0.302786 0.605571 1.21114 2.42229 4.84457 9.68914 19.3783 38.7566 77.5131
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0067 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       4.434 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1981.6 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0730-1141_X_dfm.log closed on Thu May 19 18:28:23 2016