! Started logfile: /scr/pima/bg219e_uvs/J0710-3850_X_dfm.log on Thu May 19 18:28:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0710-3850_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0710-3850_X_uva.fits
! AN table 1: 58 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.883621 visibilities/baseline/integration-bin.
! Found source: J0710-3850
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17220 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0710-3850_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.061352Jy  sigma=15.905763
! Fit after  self-cal, rms=0.726409Jy  sigma=10.234119
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7779 mas, bmaj=3.922 mas, bpa=4.997 degrees
! Estimated noise=0.849439 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204799 Jy
! Component: 100  -  total flux cleaned = 0.270172 Jy
! Total flux subtracted in 100 components = 0.270172 Jy
! Clean residual min=-0.025687 max=0.041656 Jy/beam
! Clean residual mean=-0.000189 rms=0.006660 Jy/beam
! Combined flux in latest and established models = 0.270172 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.270172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.171753Jy  sigma=2.570157
! Fit after  self-cal, rms=0.171366Jy  sigma=2.566164
! Inverting map 
! Added new window around map position (1.2, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0452298 Jy
! Component: 100  -  total flux cleaned = 0.0759357 Jy
! Total flux subtracted in 100 components = 0.0759357 Jy
! Clean residual min=-0.022107 max=0.037731 Jy/beam
! Clean residual mean=-0.000119 rms=0.005141 Jy/beam
! Combined flux in latest and established models = 0.346108 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 38 components and 0.346108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.145192Jy  sigma=2.078647
! Fit after  self-cal, rms=0.144237Jy  sigma=2.063328
! Inverting map 
! Added new window around map position (-2, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.033026 Jy
! Component: 100  -  total flux cleaned = 0.057169 Jy
! Total flux subtracted in 100 components = 0.057169 Jy
! Clean residual min=-0.012527 max=0.025541 Jy/beam
! Clean residual mean=-0.000068 rms=0.003741 Jy/beam
! Combined flux in latest and established models = 0.403277 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 59 components and 0.403277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.129144Jy  sigma=1.786503
! Fit after  self-cal, rms=0.129071Jy  sigma=1.784053
! Inverting map 
! Added new window around map position (2.6, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245771 Jy
! Component: 100  -  total flux cleaned = 0.0424385 Jy
! Total flux subtracted in 100 components = 0.0424385 Jy
! Clean residual min=-0.010462 max=0.016086 Jy/beam
! Clean residual mean=-0.000030 rms=0.002982 Jy/beam
! Combined flux in latest and established models = 0.445716 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 77 components and 0.445716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119592Jy  sigma=1.614679
! Fit after  self-cal, rms=0.119471Jy  sigma=1.610838
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=4.633 mas, bpa=3.449 degrees
! Estimated noise=0.382643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0322648 Jy
! Component: 100  -  total flux cleaned = 0.0527492 Jy
! Component: 150  -  total flux cleaned = 0.0665821 Jy
! Component: 200  -  total flux cleaned = 0.0763003 Jy
! Total flux subtracted in 200 components = 0.0763003 Jy
! Clean residual min=-0.009848 max=0.011625 Jy/beam
! Clean residual mean=0.000048 rms=0.003030 Jy/beam
! Combined flux in latest and established models = 0.522016 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 123 components and 0.522016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110173Jy  sigma=1.425954
! Fit after  self-cal, rms=0.110108Jy  sigma=1.423278
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.022 x 4.633 at 3.449 degrees (North through East)
! Clean map  min=-0.0095472  max=0.27262 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.07     KP        0.98     LA        0.93     
!   NL        1.06     OV        1.02     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.07     KP        1.00     LA        0.95     
!   NL        1.09     OV        1.03     PT        0.98     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.04     KP        0.97     LA        0.94     
!   NL        1.05     OV        1.02     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.11     KP        0.98     LA        0.94     
!   NL        1.07     OV        1.04     PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.11     KP        0.97     LA        0.93     
!   NL        1.07     OV        1.03     PT        1.00     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.13     KP        0.97     LA        0.95     
!   NL        1.06     OV        1.02     PT        0.98     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.09     KP        0.98     LA        0.94     
!   NL        1.06     OV        1.01     PT        1.05     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.08     KP        0.99     LA        0.94     
!   NL        1.04     OV        1.01     PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.10     KP        0.99     LA        0.95     
!   NL        1.04     OV        1.03     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.08     KP        0.98     LA        0.97     
!   NL        0.99     OV        1.01     PT        0.99     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.08     KP        1.01     LA        0.94     
!   NL        1.02     OV        1.00     PT        0.99     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.06     KP        0.98     LA        0.95     
!   NL        1.05     OV        1.03     PT        1.00     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.110108Jy  sigma=1.423278
! Fit after  self-cal, rms=0.113490Jy  sigma=1.395303
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=4.71 mas, bpa=3.696 degrees
! Estimated noise=0.382286 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00292688 Jy
! Component: 100  -  total flux cleaned = -0.00365724 Jy
! Component: 150  -  total flux cleaned = -0.00351658 Jy
! Component: 200  -  total flux cleaned = -0.00314898 Jy
! Total flux subtracted in 200 components = -0.00314898 Jy
! Clean residual min=-0.009212 max=0.008945 Jy/beam
! Clean residual mean=0.000082 rms=0.002416 Jy/beam
! Combined flux in latest and established models = 0.518867 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 139 components and 0.518867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112950Jy  sigma=1.385900
! Fit after  self-cal, rms=0.113031Jy  sigma=1.384444
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113031Jy  sigma=1.384444
! Fit after  self-cal, rms=0.114224Jy  sigma=1.363103
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=4.737 mas, bpa=3.741 degrees
! Estimated noise=0.383357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012933 Jy
! Component: 100  -  total flux cleaned = -0.00167947 Jy
! Component: 150  -  total flux cleaned = -0.00189571 Jy
! Component: 200  -  total flux cleaned = -0.00199303 Jy
! Total flux subtracted in 200 components = -0.00199303 Jy
! Clean residual min=-0.008406 max=0.006690 Jy/beam
! Clean residual mean=0.000060 rms=0.001871 Jy/beam
! Combined flux in latest and established models = 0.516874 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 151 components and 0.516874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113918Jy  sigma=1.359636
! Fit after  self-cal, rms=0.113956Jy  sigma=1.359054
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000210085 Jy
! Component: 100  -  total flux cleaned = 0.000116667 Jy
! Component: 150  -  total flux cleaned = 3.78068e-05 Jy
! Component: 200  -  total flux cleaned = 0.000113613 Jy
! Total flux subtracted in 200 components = 0.000113613 Jy
! Clean residual min=-0.008081 max=0.006729 Jy/beam
! Clean residual mean=0.000060 rms=0.001832 Jy/beam
! Combined flux in latest and established models = 0.516988 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 158 components and 0.516988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113772Jy  sigma=1.357382
! Fit after  self-cal, rms=0.113774Jy  sigma=1.356967
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113774Jy  sigma=1.356967
! Fit after  self-cal, rms=0.115922Jy  sigma=1.342098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=4.76 mas, bpa=3.819 degrees
! Estimated noise=0.383971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00159949 Jy
! Component: 100  -  total flux cleaned = -0.00202795 Jy
! Component: 150  -  total flux cleaned = -0.00211989 Jy
! Component: 200  -  total flux cleaned = -0.00219346 Jy
! Total flux subtracted in 200 components = -0.00219346 Jy
! Clean residual min=-0.007856 max=0.004970 Jy/beam
! Clean residual mean=0.000014 rms=0.001341 Jy/beam
! Combined flux in latest and established models = 0.514794 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 169 components and 0.514794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115661Jy  sigma=1.340082
! Fit after  self-cal, rms=0.115738Jy  sigma=1.339738
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255016 Jy
! Component: 100  -  total flux cleaned = 0.000253508 Jy
! Component: 150  -  total flux cleaned = 0.000183234 Jy
! Component: 200  -  total flux cleaned = 0.000184169 Jy
! Total flux subtracted in 200 components = 0.000184169 Jy
! Clean residual min=-0.007447 max=0.004905 Jy/beam
! Clean residual mean=0.000015 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.514978 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 176 components and 0.514978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115598Jy  sigma=1.338812
! Fit after  self-cal, rms=0.115606Jy  sigma=1.338564
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115606Jy  sigma=1.338564
! Fit after  self-cal, rms=0.117194Jy  sigma=1.337894
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.296 mas, bmaj=7.696 mas, bpa=-6.497 degrees
! Estimated noise=0.447483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00296162 Jy
! Component: 100  -  total flux cleaned = -0.00366002 Jy
! Component: 150  -  total flux cleaned = -0.0039393 Jy
! Component: 200  -  total flux cleaned = -0.00406217 Jy
! Total flux subtracted in 200 components = -0.00406217 Jy
! Clean residual min=-0.008326 max=0.006025 Jy/beam
! Clean residual mean=0.000015 rms=0.001633 Jy/beam
! Combined flux in latest and established models = 0.510916 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 192 components and 0.510916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117150Jy  sigma=1.336858
! Fit after  self-cal, rms=0.117196Jy  sigma=1.336483
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00015055 Jy
! Component: 100  -  total flux cleaned = -0.000265688 Jy
! Component: 150  -  total flux cleaned = -0.000314157 Jy
! Component: 200  -  total flux cleaned = -0.000314882 Jy
! Total flux subtracted in 200 components = -0.000314882 Jy
! Clean residual min=-0.007719 max=0.005921 Jy/beam
! Clean residual mean=0.000014 rms=0.001570 Jy/beam
! Combined flux in latest and established models = 0.510601 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 197 components and 0.510601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117166Jy  sigma=1.336360
! Fit after  self-cal, rms=0.117178Jy  sigma=1.336161
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=4.783 mas, bpa=3.887 degrees
! Estimated noise=0.384617 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 4.783 at 3.887 degrees (North through East)
! Clean map  min=-0.0080494  max=0.27099 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7736 mas, bmaj=4.019 mas, bpa=5.361 degrees
! Estimated noise=0.87018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.210019 Jy
! Component: 100  -  total flux cleaned = 0.276263 Jy
! Component: 150  -  total flux cleaned = 0.320937 Jy
! Component: 200  -  total flux cleaned = 0.355718 Jy
! Total flux subtracted in 200 components = 0.355718 Jy
! Clean residual min=-0.014795 max=0.022845 Jy/beam
! Clean residual mean=-0.000129 rms=0.004020 Jy/beam
! Combined flux in latest and established models = 0.355718 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.355718 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=4.783 mas, bpa=3.887 degrees
! Estimated noise=0.384617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0541389 Jy
! Component: 100  -  total flux cleaned = 0.0866046 Jy
! Component: 150  -  total flux cleaned = 0.107578 Jy
! Component: 200  -  total flux cleaned = 0.121848 Jy
! Total flux subtracted in 200 components = 0.121848 Jy
! Clean residual min=-0.007418 max=0.010892 Jy/beam
! Clean residual mean=-0.000057 rms=0.002179 Jy/beam
! Combined flux in latest and established models = 0.477566 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 94 components and 0.477566 Jy
! Inverting map 
! Added new window around map position (-1.4, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109569 Jy
! Component: 100  -  total flux cleaned = 0.0182678 Jy
! Component: 150  -  total flux cleaned = 0.0234996 Jy
! Component: 200  -  total flux cleaned = 0.0270937 Jy
! Total flux subtracted in 200 components = 0.0270937 Jy
! Clean residual min=-0.006223 max=0.005126 Jy/beam
! Clean residual mean=-0.000004 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.50466 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 127 components and 0.50466 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.296 mas, bmaj=7.696 mas, bpa=-6.497 degrees
! Estimated noise=0.447483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372127 Jy
! Component: 100  -  total flux cleaned = 0.004227 Jy
! Component: 150  -  total flux cleaned = 0.00454465 Jy
! Component: 200  -  total flux cleaned = 0.00481796 Jy
! Total flux subtracted in 200 components = 0.00481796 Jy
! Clean residual min=-0.007000 max=0.006345 Jy/beam
! Clean residual mean=0.000010 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 0.509478 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000322748 Jy
! Component: 100  -  total flux cleaned = 0.000538874 Jy
! Component: 150  -  total flux cleaned = 0.000664001 Jy
! Component: 200  -  total flux cleaned = 0.000719714 Jy
! Total flux subtracted in 200 components = 0.000719714 Jy
! Clean residual min=-0.006703 max=0.006006 Jy/beam
! Clean residual mean=0.000012 rms=0.001538 Jy/beam
! Combined flux in latest and established models = 0.510197 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 162 components and 0.510197 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=4.783 mas, bpa=3.887 degrees
! Estimated noise=0.384617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187582 Jy
! Component: 100  -  total flux cleaned = 0.00201321 Jy
! Component: 150  -  total flux cleaned = 0.00207472 Jy
! Component: 200  -  total flux cleaned = 0.00218354 Jy
! Total flux subtracted in 200 components = 0.00218354 Jy
! Clean residual min=-0.005895 max=0.004783 Jy/beam
! Clean residual mean=0.000010 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 0.512381 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 183 components and 0.512381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116677Jy  sigma=1.333678
! Fit after  self-cal, rms=0.116626Jy  sigma=1.333119
wmodel /J0710-3850_X_map.mod
! wmodel: Unable to open new model file: /J0710-3850_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0710-3850_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 4.783 at 3.887 degrees (North through East)
! Clean map  min=-0.0057921  max=0.27348 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0710-3850_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.273479 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00112771 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.23707 1.23707 2.47414 4.94828 9.89655 19.7931 39.5862 79.1724
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0033 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.273 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  242.508 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0710-3850_X_dfm.log closed on Thu May 19 18:28:15 2016