! Started logfile: /scr/pima/bg219e_uvs/J0638+5933_X_dfm.log on Thu May 19 18:27:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0638+5933_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0638+5933_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.538624 visibilities/baseline/integration-bin.
! Found source: J0638+5933
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12216 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0638+5933_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 199 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.201209Jy  sigma=23.690444
! Fit after  self-cal, rms=0.451560Jy  sigma=9.583306
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.747 mas, bmaj=1.194 mas, bpa=-51.34 degrees
! Estimated noise=0.617791 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.421234 Jy
! Component: 100  -  total flux cleaned = 0.590523 Jy
! Total flux subtracted in 100 components = 0.590523 Jy
! Clean residual min=-0.027160 max=0.075178 Jy/beam
! Clean residual mean=-0.000024 rms=0.007060 Jy/beam
! Combined flux in latest and established models = 0.590524 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.590524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.182890Jy  sigma=3.503489
! Fit after  self-cal, rms=0.180139Jy  sigma=3.442012
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0858899 Jy
! Component: 100  -  total flux cleaned = 0.136078 Jy
! Total flux subtracted in 100 components = 0.136078 Jy
! Clean residual min=-0.013651 max=0.026108 Jy/beam
! Clean residual mean=-0.000012 rms=0.003102 Jy/beam
! Combined flux in latest and established models = 0.726602 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.726602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095218Jy  sigma=1.811978
! Fit after  self-cal, rms=0.094956Jy  sigma=1.805388
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0320247 Jy
! Component: 100  -  total flux cleaned = 0.0523085 Jy
! Total flux subtracted in 100 components = 0.0523085 Jy
! Clean residual min=-0.009991 max=0.014605 Jy/beam
! Clean residual mean=-0.000007 rms=0.001990 Jy/beam
! Combined flux in latest and established models = 0.77891 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.77891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073565Jy  sigma=1.398315
! Fit after  self-cal, rms=0.073424Jy  sigma=1.395004
! Inverting map 
! Added new window around map position (-1.4, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152519 Jy
! Component: 100  -  total flux cleaned = 0.0230277 Jy
! Total flux subtracted in 100 components = 0.0230277 Jy
! Clean residual min=-0.007749 max=0.011204 Jy/beam
! Clean residual mean=-0.000005 rms=0.001606 Jy/beam
! Combined flux in latest and established models = 0.801938 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 29 components and 0.801938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068016Jy  sigma=1.293777
! Fit after  self-cal, rms=0.067954Jy  sigma=1.292175
! Inverting map 
! Added new window around map position (2.2, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115251 Jy
! Component: 100  -  total flux cleaned = 0.0196635 Jy
! Total flux subtracted in 100 components = 0.0196635 Jy
! Clean residual min=-0.006093 max=0.006926 Jy/beam
! Clean residual mean=-0.000002 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.821602 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 35 components and 0.821602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064807Jy  sigma=1.236847
! Fit after  self-cal, rms=0.064700Jy  sigma=1.234662
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=1.457 mas, bpa=-55.43 degrees
! Estimated noise=0.362801 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00936184 Jy
! Component: 100  -  total flux cleaned = 0.0150902 Jy
! Component: 150  -  total flux cleaned = 0.019042 Jy
! Component: 200  -  total flux cleaned = 0.0211865 Jy
! Total flux subtracted in 200 components = 0.0211865 Jy
! Clean residual min=-0.004323 max=0.004570 Jy/beam
! Clean residual mean=0.000002 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.842788 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 40 components and 0.842788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063014Jy  sigma=1.206334
! Fit after  self-cal, rms=0.062956Jy  sigma=1.205241
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.005 x 1.457 at -55.43 degrees (North through East)
! Clean map  min=-0.003719  max=0.5519 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.01     KP        0.98     
!   LA        1.00     MK        0.97     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        0.99     
!   LA        1.00     MK        0.96     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.98     MK        0.99     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.98     MK        1.02     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.98     MK        1.07     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.99     KP        0.98     
!   LA        0.98     MK        1.02     NL        1.01     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.04     NL        1.02     OV        1.00     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.98     MK        1.06     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.97     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.98     MK        0.97     NL        1.00     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.062956Jy  sigma=1.205241
! Fit after  self-cal, rms=0.061933Jy  sigma=1.184864
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=1.459 mas, bpa=-55.49 degrees
! Estimated noise=0.363065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0034565 Jy
! Component: 100  -  total flux cleaned = -0.00470226 Jy
! Component: 150  -  total flux cleaned = -0.0047025 Jy
! Component: 200  -  total flux cleaned = -0.0047968 Jy
! Total flux subtracted in 200 components = -0.0047968 Jy
! Clean residual min=-0.003051 max=0.003336 Jy/beam
! Clean residual mean=0.000004 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.837991 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 47 components and 0.837991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061752Jy  sigma=1.180469
! Fit after  self-cal, rms=0.061723Jy  sigma=1.180029
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061723Jy  sigma=1.180029
! Fit after  self-cal, rms=0.061250Jy  sigma=1.170442
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=1.459 mas, bpa=-55.73 degrees
! Estimated noise=0.363328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00152776 Jy
! Component: 100  -  total flux cleaned = -0.00171863 Jy
! Component: 150  -  total flux cleaned = -0.00175755 Jy
! Component: 200  -  total flux cleaned = -0.00179127 Jy
! Total flux subtracted in 200 components = -0.00179127 Jy
! Clean residual min=-0.002304 max=0.002542 Jy/beam
! Clean residual mean=0.000002 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.8362 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.8362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061186Jy  sigma=1.168819
! Fit after  self-cal, rms=0.061175Jy  sigma=1.168611
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222434 Jy
! Component: 100  -  total flux cleaned = 0.00223766 Jy
! Component: 150  -  total flux cleaned = 0.00223917 Jy
! Component: 200  -  total flux cleaned = 0.00228895 Jy
! Total flux subtracted in 200 components = 0.00228895 Jy
! Clean residual min=-0.002189 max=0.002506 Jy/beam
! Clean residual mean=0.000001 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.838489 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.838489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061023Jy  sigma=1.165578
! Fit after  self-cal, rms=0.061016Jy  sigma=1.165434
! Inverting map 
! Added new window around map position (-9.4, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137923 Jy
! Component: 100  -  total flux cleaned = 0.00160147 Jy
! Component: 150  -  total flux cleaned = 0.00174436 Jy
! Component: 200  -  total flux cleaned = 0.00191593 Jy
! Total flux subtracted in 200 components = 0.00191593 Jy
! Clean residual min=-0.001955 max=0.001763 Jy/beam
! Clean residual mean=0.000002 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.840405 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 82 components and 0.840405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060917Jy  sigma=1.163426
! Fit after  self-cal, rms=0.060915Jy  sigma=1.163375
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060915Jy  sigma=1.163375
! Fit after  self-cal, rms=0.060910Jy  sigma=1.163064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.459 mas, bpa=-55.78 degrees
! Estimated noise=0.3634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.53377e-05 Jy
! Component: 100  -  total flux cleaned = 0.000141393 Jy
! Component: 150  -  total flux cleaned = 0.00021637 Jy
! Component: 200  -  total flux cleaned = 0.000286608 Jy
! Total flux subtracted in 200 components = 0.000286608 Jy
! Clean residual min=-0.001879 max=0.001701 Jy/beam
! Clean residual mean=0.000002 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.840692 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 91 components and 0.840692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060863Jy  sigma=1.162078
! Fit after  self-cal, rms=0.060863Jy  sigma=1.162060
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.36403e-06 Jy
! Component: 100  -  total flux cleaned = 0.000120299 Jy
! Component: 150  -  total flux cleaned = 0.000179439 Jy
! Component: 200  -  total flux cleaned = 0.000208393 Jy
! Total flux subtracted in 200 components = 0.000208393 Jy
! Clean residual min=-0.001822 max=0.001700 Jy/beam
! Clean residual mean=0.000002 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.8409 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 99 components and 0.8409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060837Jy  sigma=1.161528
! Fit after  self-cal, rms=0.060837Jy  sigma=1.161518
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060837Jy  sigma=1.161518
! Fit after  self-cal, rms=0.060849Jy  sigma=1.161435
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.284 mas, bmaj=2.68 mas, bpa=-79.08 degrees
! Estimated noise=0.468857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.60709e-05 Jy
! Component: 100  -  total flux cleaned = 0.000114373 Jy
! Component: 150  -  total flux cleaned = 0.000236534 Jy
! Component: 200  -  total flux cleaned = 0.000321764 Jy
! Total flux subtracted in 200 components = 0.000321764 Jy
! Clean residual min=-0.001580 max=0.001664 Jy/beam
! Clean residual mean=0.000004 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.841222 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 110 components and 0.841222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060841Jy  sigma=1.161251
! Fit after  self-cal, rms=0.060838Jy  sigma=1.161214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.02778e-05 Jy
! Component: 100  -  total flux cleaned = 4.20788e-05 Jy
! Component: 150  -  total flux cleaned = 0.000105556 Jy
! Component: 200  -  total flux cleaned = 0.00017767 Jy
! Total flux subtracted in 200 components = 0.00017767 Jy
! Clean residual min=-0.001586 max=0.001630 Jy/beam
! Clean residual mean=0.000004 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.8414 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 118 components and 0.8414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060838Jy  sigma=1.161220
! Fit after  self-cal, rms=0.060837Jy  sigma=1.161210
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.459 mas, bpa=-55.86 degrees
! Estimated noise=0.363514 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 1.459 at -55.86 degrees (North through East)
! Clean map  min=-0.0022224  max=0.55422 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060837Jy  sigma=1.161210
! Fit after  self-cal, rms=0.056664Jy  sigma=1.068628
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=1.459 mas, bpa=-55.76 degrees
! Estimated noise=0.362612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000652894 Jy
! Component: 100  -  total flux cleaned = -0.000917607 Jy
! Component: 150  -  total flux cleaned = -0.00107646 Jy
! Component: 200  -  total flux cleaned = -0.00110436 Jy
! Total flux subtracted in 200 components = -0.00110436 Jy
! Clean residual min=-0.001704 max=0.001838 Jy/beam
! Clean residual mean=0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.840295 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 134 components and 0.840295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056621Jy  sigma=1.067727
! Fit after  self-cal, rms=0.056621Jy  sigma=1.067703
! Inverting map 
! Added new window around map position (-38, 19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116694 Jy
! Component: 100  -  total flux cleaned = 0.00140229 Jy
! Component: 150  -  total flux cleaned = 0.0014015 Jy
! Component: 200  -  total flux cleaned = 0.0013773 Jy
! Total flux subtracted in 200 components = 0.0013773 Jy
! Clean residual min=-0.001567 max=0.001723 Jy/beam
! Clean residual mean=0.000000 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.841673 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 154 components and 0.841673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056572Jy  sigma=1.066630
! Fit after  self-cal, rms=0.056571Jy  sigma=1.066595
! Inverting map 
! Added new window around map position (-41.6, -37.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116209 Jy
! Component: 100  -  total flux cleaned = 0.00116374 Jy
! Component: 150  -  total flux cleaned = 0.00118942 Jy
! Component: 200  -  total flux cleaned = 0.00116772 Jy
! Total flux subtracted in 200 components = 0.00116772 Jy
! Clean residual min=-0.001606 max=0.001468 Jy/beam
! Clean residual mean=0.000000 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.842841 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 167 components and 0.842841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056533Jy  sigma=1.065758
! Fit after  self-cal, rms=0.056531Jy  sigma=1.065721
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056531Jy  sigma=1.065721
! Fit after  self-cal, rms=0.056480Jy  sigma=1.065348
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7515 mas, bmaj=1.193 mas, bpa=-51.64 degrees
! Estimated noise=0.621315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.425206 Jy
! Component: 100  -  total flux cleaned = 0.595673 Jy
! Component: 150  -  total flux cleaned = 0.679966 Jy
! Component: 200  -  total flux cleaned = 0.729272 Jy
! Total flux subtracted in 200 components = 0.729272 Jy
! Clean residual min=-0.012558 max=0.025306 Jy/beam
! Clean residual mean=-0.000010 rms=0.002823 Jy/beam
! Combined flux in latest and established models = 0.729272 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.729272 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.46 mas, bpa=-55.83 degrees
! Estimated noise=0.362356 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.044162 Jy
! Component: 100  -  total flux cleaned = 0.0663511 Jy
! Component: 150  -  total flux cleaned = 0.079649 Jy
! Component: 200  -  total flux cleaned = 0.0881021 Jy
! Total flux subtracted in 200 components = 0.0881021 Jy
! Clean residual min=-0.003583 max=0.005537 Jy/beam
! Clean residual mean=-0.000002 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.817374 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 32 components and 0.817374 Jy
! Inverting map 
! Added new window around map position (1, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00594061 Jy
! Component: 100  -  total flux cleaned = 0.0103117 Jy
! Component: 150  -  total flux cleaned = 0.0134158 Jy
! Component: 200  -  total flux cleaned = 0.0151742 Jy
! Total flux subtracted in 200 components = 0.0151742 Jy
! Clean residual min=-0.002884 max=0.002511 Jy/beam
! Clean residual mean=-0.000001 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.832548 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 48 components and 0.832548 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.285 mas, bmaj=2.681 mas, bpa=-79.11 degrees
! Estimated noise=0.46706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025742 Jy
! Component: 100  -  total flux cleaned = 0.00394337 Jy
! Component: 150  -  total flux cleaned = 0.00504149 Jy
! Component: 200  -  total flux cleaned = 0.00568345 Jy
! Total flux subtracted in 200 components = 0.00568345 Jy
! Clean residual min=-0.001760 max=0.001826 Jy/beam
! Clean residual mean=0.000000 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.838231 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000429794 Jy
! Component: 100  -  total flux cleaned = 0.000819626 Jy
! Component: 150  -  total flux cleaned = 0.00113767 Jy
! Component: 200  -  total flux cleaned = 0.0014987 Jy
! Total flux subtracted in 200 components = 0.0014987 Jy
! Clean residual min=-0.001578 max=0.001596 Jy/beam
! Clean residual mean=0.000001 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.83973 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 84 components and 0.83973 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.46 mas, bpa=-55.83 degrees
! Estimated noise=0.362356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000491665 Jy
! Component: 100  -  total flux cleaned = -0.000583274 Jy
! Component: 150  -  total flux cleaned = -0.000657841 Jy
! Component: 200  -  total flux cleaned = -0.000801242 Jy
! Total flux subtracted in 200 components = -0.000801242 Jy
! Clean residual min=-0.002113 max=0.001958 Jy/beam
! Clean residual mean=-0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.838929 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 100 components and 0.838929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056791Jy  sigma=1.072670
! Fit after  self-cal, rms=0.056777Jy  sigma=1.072447
wmodel /J0638+5933_X_map.mod
! wmodel: Unable to open new model file: /J0638+5933_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0638+5933_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 1.46 at -55.83 degrees (North through East)
! Clean map  min=-0.001798  max=0.55475 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0638+5933_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.554748 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000435519 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.235522 0.235522 0.471045 0.94209 1.88418 3.76836 7.53672 15.0734 30.1469 60.2938
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.554 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1273.76 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0638+5933_X_dfm.log closed on Thu May 19 18:27:44 2016