! Started logfile: /scr/pima/bg219e_uvs/J0623+4554_X_dfm.log on Thu May 19 18:27:13 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0623+4554_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0623+4554_X_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.890625 visibilities/baseline/integration-bin.
! Found source: J0623+4554
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18468 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0623+4554_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010102Jy  sigma=24.210801
! Fit after  self-cal, rms=0.886780Jy  sigma=21.191914
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=1.494 mas, bpa=50.76 degrees
! Estimated noise=0.505432 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.086462 Jy
! Component: 100  -  total flux cleaned = 0.111664 Jy
! Total flux subtracted in 100 components = 0.111664 Jy
! Clean residual min=-0.005632 max=0.011544 Jy/beam
! Clean residual mean=0.000022 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.111664 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.111664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063475Jy  sigma=1.456115
! Fit after  self-cal, rms=0.063087Jy  sigma=1.447797
! Inverting map 
! Added new window around map position (-1.4, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136727 Jy
! Component: 100  -  total flux cleaned = 0.0207134 Jy
! Total flux subtracted in 100 components = 0.0207134 Jy
! Clean residual min=-0.003400 max=0.004493 Jy/beam
! Clean residual mean=0.000010 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.132378 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.132378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059584Jy  sigma=1.357851
! Fit after  self-cal, rms=0.059391Jy  sigma=1.353336
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055629 Jy
! Component: 100  -  total flux cleaned = 0.0086781 Jy
! Total flux subtracted in 100 components = 0.0086781 Jy
! Clean residual min=-0.002906 max=0.003230 Jy/beam
! Clean residual mean=0.000006 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.141056 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.141056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058738Jy  sigma=1.336798
! Fit after  self-cal, rms=0.058669Jy  sigma=1.335111
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.4 mas, bmaj=1.746 mas, bpa=49.97 degrees
! Estimated noise=0.222936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00365598 Jy
! Component: 100  -  total flux cleaned = 0.00557187 Jy
! Component: 150  -  total flux cleaned = 0.00680484 Jy
! Component: 200  -  total flux cleaned = 0.00768159 Jy
! Total flux subtracted in 200 components = 0.00768159 Jy
! Clean residual min=-0.001715 max=0.001748 Jy/beam
! Clean residual mean=0.000006 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.148737 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.148737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058439Jy  sigma=1.329349
! Fit after  self-cal, rms=0.058420Jy  sigma=1.328848
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.4 x 1.746 at 49.97 degrees (North through East)
! Clean map  min=-0.0015283  max=0.11214 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        1.04     
!   LA        0.98     NL        0.99     OV        1.00     PT        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.95     KP        1.00     
!   LA        1.00     NL        1.05     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.01     KP        0.99     
!   LA        0.98     NL        0.96     OV        0.98     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.06     KP        0.98     
!   LA        0.96     NL        1.00     OV        1.04     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.07     KP        1.00     
!   LA        0.97     NL        0.98     OV        1.04     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        1.01     
!   LA        0.96     NL        1.04     OV        0.98     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.95     KP        0.98     
!   LA        0.95     NL        1.03     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.03     KP        0.97     
!   LA        0.98     NL        1.03     OV        1.02     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.00     KP        0.97     
!   LA        0.96     NL        1.00     OV        1.02     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.06     KP        1.00     
!   LA        0.97     NL        1.01     OV        1.04     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.03     OV        1.04     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.96     KP        1.05     
!   LA        0.97     NL        1.05     OV        1.02     PT        0.97     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.058420Jy  sigma=1.328848
! Fit after  self-cal, rms=0.058344Jy  sigma=1.324984
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=1.749 mas, bpa=49.94 degrees
! Estimated noise=0.222719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000195121 Jy
! Component: 100  -  total flux cleaned = 0.000237102 Jy
! Component: 150  -  total flux cleaned = 0.000267096 Jy
! Component: 200  -  total flux cleaned = 0.000280898 Jy
! Total flux subtracted in 200 components = 0.000280898 Jy
! Clean residual min=-0.001495 max=0.001504 Jy/beam
! Clean residual mean=-0.000006 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.149018 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.149018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058330Jy  sigma=1.324640
! Fit after  self-cal, rms=0.058328Jy  sigma=1.324492
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058328Jy  sigma=1.324492
! Fit after  self-cal, rms=0.058229Jy  sigma=1.322049
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.4 mas, bmaj=1.745 mas, bpa=49.77 degrees
! Estimated noise=0.222565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000442536 Jy
! Component: 100  -  total flux cleaned = 0.000440757 Jy
! Component: 150  -  total flux cleaned = 0.000429164 Jy
! Component: 200  -  total flux cleaned = 0.000449483 Jy
! Total flux subtracted in 200 components = 0.000449483 Jy
! Clean residual min=-0.001384 max=0.001318 Jy/beam
! Clean residual mean=-0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.149468 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.149468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058220Jy  sigma=1.321842
! Fit after  self-cal, rms=0.058221Jy  sigma=1.321767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.9315e-05 Jy
! Component: 100  -  total flux cleaned = 3.96155e-05 Jy
! Component: 150  -  total flux cleaned = 4.87513e-05 Jy
! Component: 200  -  total flux cleaned = 4.01522e-05 Jy
! Total flux subtracted in 200 components = 4.01522e-05 Jy
! Clean residual min=-0.001381 max=0.001291 Jy/beam
! Clean residual mean=-0.000000 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.149508 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 0.149508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058217Jy  sigma=1.321662
! Fit after  self-cal, rms=0.058215Jy  sigma=1.321640
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058215Jy  sigma=1.321640
! Fit after  self-cal, rms=0.058235Jy  sigma=1.321633
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.4 mas, bmaj=1.744 mas, bpa=49.74 degrees
! Estimated noise=0.222694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000374133 Jy
! Component: 100  -  total flux cleaned = 0.000458081 Jy
! Component: 150  -  total flux cleaned = 0.00048291 Jy
! Component: 200  -  total flux cleaned = 0.000483025 Jy
! Total flux subtracted in 200 components = 0.000483025 Jy
! Clean residual min=-0.001369 max=0.001258 Jy/beam
! Clean residual mean=0.000000 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.149991 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.149991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058232Jy  sigma=1.321533
! Fit after  self-cal, rms=0.058230Jy  sigma=1.321520
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.64484e-06 Jy
! Component: 100  -  total flux cleaned = 2.6238e-05 Jy
! Component: 150  -  total flux cleaned = 3.3585e-05 Jy
! Component: 200  -  total flux cleaned = 3.36785e-05 Jy
! Total flux subtracted in 200 components = 3.36785e-05 Jy
! Clean residual min=-0.001365 max=0.001247 Jy/beam
! Clean residual mean=0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.150025 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.150025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058228Jy  sigma=1.321464
! Fit after  self-cal, rms=0.058228Jy  sigma=1.321456
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058228Jy  sigma=1.321456
! Fit after  self-cal, rms=0.058272Jy  sigma=1.321448
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.418 mas, bmaj=2.502 mas, bpa=-10.48 degrees
! Estimated noise=0.255752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000479285 Jy
! Component: 100  -  total flux cleaned = 0.000735019 Jy
! Component: 150  -  total flux cleaned = 0.000802262 Jy
! Component: 200  -  total flux cleaned = 0.000813759 Jy
! Total flux subtracted in 200 components = 0.000813759 Jy
! Clean residual min=-0.001264 max=0.001402 Jy/beam
! Clean residual mean=-0.000000 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.150838 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 56 components and 0.150838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058271Jy  sigma=1.321400
! Fit after  self-cal, rms=0.058270Jy  sigma=1.321390
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.29679e-05 Jy
! Component: 100  -  total flux cleaned = 6.6011e-05 Jy
! Component: 150  -  total flux cleaned = 7.65005e-05 Jy
! Component: 200  -  total flux cleaned = 9.07731e-05 Jy
! Total flux subtracted in 200 components = 9.07731e-05 Jy
! Clean residual min=-0.001248 max=0.001401 Jy/beam
! Clean residual mean=-0.000001 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.150929 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 57 components and 0.150929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058270Jy  sigma=1.321383
! Fit after  self-cal, rms=0.058269Jy  sigma=1.321383
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.4 mas, bmaj=1.743 mas, bpa=49.72 degrees
! Estimated noise=0.222896 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.4 x 1.743 at 49.72 degrees (North through East)
! Clean map  min=-0.0013159  max=0.1115 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=1.487 mas, bpa=50.55 degrees
! Estimated noise=0.503916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0861521 Jy
! Component: 100  -  total flux cleaned = 0.115516 Jy
! Component: 150  -  total flux cleaned = 0.128423 Jy
! Component: 200  -  total flux cleaned = 0.134604 Jy
! Total flux subtracted in 200 components = 0.134604 Jy
! Clean residual min=-0.003185 max=0.003284 Jy/beam
! Clean residual mean=0.000009 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.134604 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.134604 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.4 mas, bmaj=1.743 mas, bpa=49.72 degrees
! Estimated noise=0.222896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580383 Jy
! Component: 100  -  total flux cleaned = 0.00895724 Jy
! Component: 150  -  total flux cleaned = 0.0109998 Jy
! Component: 200  -  total flux cleaned = 0.0124091 Jy
! Total flux subtracted in 200 components = 0.0124091 Jy
! Clean residual min=-0.001475 max=0.001284 Jy/beam
! Clean residual mean=0.000006 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.147014 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 53 components and 0.147014 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.418 mas, bmaj=2.502 mas, bpa=-10.48 degrees
! Estimated noise=0.255752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015485 Jy
! Component: 100  -  total flux cleaned = 0.00246049 Jy
! Component: 150  -  total flux cleaned = 0.00301994 Jy
! Component: 200  -  total flux cleaned = 0.00336707 Jy
! Total flux subtracted in 200 components = 0.00336707 Jy
! Clean residual min=-0.001284 max=0.001331 Jy/beam
! Clean residual mean=0.000001 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.150381 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216787 Jy
! Component: 100  -  total flux cleaned = 0.000300629 Jy
! Component: 150  -  total flux cleaned = 0.000335715 Jy
! Component: 200  -  total flux cleaned = 0.000362667 Jy
! Total flux subtracted in 200 components = 0.000362667 Jy
! Clean residual min=-0.001266 max=0.001349 Jy/beam
! Clean residual mean=-0.000000 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.150743 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 73 components and 0.150743 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.4 mas, bmaj=1.743 mas, bpa=49.72 degrees
! Estimated noise=0.222896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014694 Jy
! Component: 100  -  total flux cleaned = -0.000156428 Jy
! Component: 150  -  total flux cleaned = -0.000174522 Jy
! Component: 200  -  total flux cleaned = -0.00019075 Jy
! Total flux subtracted in 200 components = -0.00019075 Jy
! Clean residual min=-0.001370 max=0.001223 Jy/beam
! Clean residual mean=0.000000 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.150553 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 79 components and 0.150553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058270Jy  sigma=1.321371
! Fit after  self-cal, rms=0.058268Jy  sigma=1.321350
wmodel /J0623+4554_X_map.mod
! wmodel: Unable to open new model file: /J0623+4554_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0623+4554_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.4 x 1.743 at 49.72 degrees (North through East)
! Clean map  min=-0.0013082  max=0.11155 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0623+4554_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.111551 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000309991 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.833678 0.833678 1.66736 3.33471 6.66943 13.3389 26.6777 53.3554
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.111 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  359.851 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0623+4554_X_dfm.log closed on Thu May 19 18:27:16 2016