! Started logfile: /scr/pima/bg219e_uvs/J0623+4554_S_dfm.log on Thu May 19 18:27:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0623+4554_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0623+4554_S_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.890625 visibilities/baseline/integration-bin.
! Found source: J0623+4554
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6156 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0623+4554_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006994Jy  sigma=22.984352
! Fit after  self-cal, rms=0.895445Jy  sigma=20.399896
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.158 mas, bmaj=5.701 mas, bpa=50.29 degrees
! Estimated noise=0.650179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0793376 Jy
! Component: 100  -  total flux cleaned = 0.101581 Jy
! Total flux subtracted in 100 components = 0.101581 Jy
! Clean residual min=-0.005796 max=0.014145 Jy/beam
! Clean residual mean=-0.000013 rms=0.001730 Jy/beam
! Combined flux in latest and established models = 0.101581 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.101581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066307Jy  sigma=1.455896
! Fit after  self-cal, rms=0.066023Jy  sigma=1.449382
! Inverting map 
! Added new window around map position (-6.5, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146367 Jy
! Component: 100  -  total flux cleaned = 0.0228105 Jy
! Total flux subtracted in 100 components = 0.0228105 Jy
! Clean residual min=-0.003834 max=0.004498 Jy/beam
! Clean residual mean=-0.000010 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.124391 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 26 components and 0.124391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062174Jy  sigma=1.352871
! Fit after  self-cal, rms=0.061925Jy  sigma=1.347080
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668683 Jy
! Component: 100  -  total flux cleaned = 0.0108665 Jy
! Total flux subtracted in 100 components = 0.0108665 Jy
! Clean residual min=-0.003288 max=0.003092 Jy/beam
! Clean residual mean=-0.000009 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.135258 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 44 components and 0.135258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061045Jy  sigma=1.324720
! Fit after  self-cal, rms=0.060984Jy  sigma=1.323249
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.319 mas, bmaj=6.538 mas, bpa=49.44 degrees
! Estimated noise=0.407115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430941 Jy
! Component: 100  -  total flux cleaned = 0.00670302 Jy
! Component: 150  -  total flux cleaned = 0.00822928 Jy
! Component: 200  -  total flux cleaned = 0.0092406 Jy
! Total flux subtracted in 200 components = 0.0092406 Jy
! Clean residual min=-0.002237 max=0.001985 Jy/beam
! Clean residual mean=-0.000017 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.144498 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 77 components and 0.144498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060684Jy  sigma=1.315619
! Fit after  self-cal, rms=0.060667Jy  sigma=1.315179
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.319 x 6.538 at 49.44 degrees (North through East)
! Clean map  min=-0.0021865  max=0.10402 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.94     KP        1.03     
!   LA        0.97     NL        0.99     OV        1.01     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.96     NL        0.99     OV        0.98     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        1.00     
!   LA        1.01     NL        0.97     OV        1.02     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        0.96     KP        1.04     
!   LA        1.02     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.06     
! 
! 
! Fit before self-cal, rms=0.060667Jy  sigma=1.315179
! Fit after  self-cal, rms=0.060211Jy  sigma=1.312599
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.338 mas, bmaj=6.534 mas, bpa=49.38 degrees
! Estimated noise=0.404707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000633095 Jy
! Component: 100  -  total flux cleaned = 0.000635239 Jy
! Component: 150  -  total flux cleaned = 0.000655238 Jy
! Component: 200  -  total flux cleaned = 0.00068781 Jy
! Total flux subtracted in 200 components = 0.00068781 Jy
! Clean residual min=-0.001999 max=0.001831 Jy/beam
! Clean residual mean=-0.000006 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.145186 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 92 components and 0.145186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060186Jy  sigma=1.312054
! Fit after  self-cal, rms=0.060187Jy  sigma=1.311910
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060187Jy  sigma=1.311910
! Fit after  self-cal, rms=0.060132Jy  sigma=1.310242
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.34 mas, bmaj=6.534 mas, bpa=49.36 degrees
! Estimated noise=0.404778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394769 Jy
! Component: 100  -  total flux cleaned = 0.000474889 Jy
! Component: 150  -  total flux cleaned = 0.00051606 Jy
! Component: 200  -  total flux cleaned = 0.000554979 Jy
! Total flux subtracted in 200 components = 0.000554979 Jy
! Clean residual min=-0.001863 max=0.001700 Jy/beam
! Clean residual mean=-0.000008 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.145741 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 101 components and 0.145741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060124Jy  sigma=1.310048
! Fit after  self-cal, rms=0.060124Jy  sigma=1.309998
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.01413e-05 Jy
! Component: 100  -  total flux cleaned = 8.14484e-05 Jy
! Component: 150  -  total flux cleaned = 0.000117088 Jy
! Component: 200  -  total flux cleaned = 0.000150995 Jy
! Total flux subtracted in 200 components = 0.000150995 Jy
! Clean residual min=-0.001868 max=0.001669 Jy/beam
! Clean residual mean=-0.000007 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.145892 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 107 components and 0.145892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060119Jy  sigma=1.309892
! Fit after  self-cal, rms=0.060118Jy  sigma=1.309879
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060118Jy  sigma=1.309879
! Fit after  self-cal, rms=0.060178Jy  sigma=1.309872
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.343 mas, bmaj=6.53 mas, bpa=49.44 degrees
! Estimated noise=0.405175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346371 Jy
! Component: 100  -  total flux cleaned = 0.000464243 Jy
! Component: 150  -  total flux cleaned = 0.00049612 Jy
! Component: 200  -  total flux cleaned = 0.000526895 Jy
! Total flux subtracted in 200 components = 0.000526895 Jy
! Clean residual min=-0.001846 max=0.001649 Jy/beam
! Clean residual mean=-0.000008 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.146419 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 109 components and 0.146419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060174Jy  sigma=1.309769
! Fit after  self-cal, rms=0.060174Jy  sigma=1.309759
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.65959e-05 Jy
! Component: 100  -  total flux cleaned = 4.64306e-05 Jy
! Component: 150  -  total flux cleaned = 7.37533e-05 Jy
! Component: 200  -  total flux cleaned = 8.28383e-05 Jy
! Total flux subtracted in 200 components = 8.28383e-05 Jy
! Clean residual min=-0.001847 max=0.001645 Jy/beam
! Clean residual mean=-0.000008 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.146502 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 110 components and 0.146502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060171Jy  sigma=1.309698
! Fit after  self-cal, rms=0.060171Jy  sigma=1.309692
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060171Jy  sigma=1.309692
! Fit after  self-cal, rms=0.060223Jy  sigma=1.309679
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.687 mas, bmaj=8.977 mas, bpa=2.002 degrees
! Estimated noise=0.459482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238631 Jy
! Component: 100  -  total flux cleaned = 0.000311442 Jy
! Component: 150  -  total flux cleaned = 0.000328937 Jy
! Component: 200  -  total flux cleaned = 0.00034505 Jy
! Total flux subtracted in 200 components = 0.00034505 Jy
! Clean residual min=-0.002087 max=0.001619 Jy/beam
! Clean residual mean=-0.000014 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.146847 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 119 components and 0.146847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060222Jy  sigma=1.309643
! Fit after  self-cal, rms=0.060222Jy  sigma=1.309629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.37094e-05 Jy
! Component: 100  -  total flux cleaned = 1.0983e-05 Jy
! Component: 150  -  total flux cleaned = 2.513e-05 Jy
! Component: 200  -  total flux cleaned = 4.48416e-05 Jy
! Total flux subtracted in 200 components = 4.48416e-05 Jy
! Clean residual min=-0.002083 max=0.001637 Jy/beam
! Clean residual mean=-0.000014 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.146892 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 126 components and 0.146892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060222Jy  sigma=1.309615
! Fit after  self-cal, rms=0.060221Jy  sigma=1.309606
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.341 mas, bmaj=6.528 mas, bpa=49.48 degrees
! Estimated noise=0.405498 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.341 x 6.528 at 49.48 degrees (North through East)
! Clean map  min=-0.0018005  max=0.10351 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.193 mas, bmaj=5.692 mas, bpa=50.33 degrees
! Estimated noise=0.647251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0786806 Jy
! Component: 100  -  total flux cleaned = 0.105425 Jy
! Component: 150  -  total flux cleaned = 0.118893 Jy
! Component: 200  -  total flux cleaned = 0.127289 Jy
! Total flux subtracted in 200 components = 0.127289 Jy
! Clean residual min=-0.003699 max=0.004471 Jy/beam
! Clean residual mean=-0.000008 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.127289 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.127289 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.341 mas, bmaj=6.528 mas, bpa=49.48 degrees
! Estimated noise=0.405498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00727896 Jy
! Component: 100  -  total flux cleaned = 0.011594 Jy
! Component: 150  -  total flux cleaned = 0.0142928 Jy
! Component: 200  -  total flux cleaned = 0.0160356 Jy
! Total flux subtracted in 200 components = 0.0160356 Jy
! Clean residual min=-0.001990 max=0.001717 Jy/beam
! Clean residual mean=-0.000010 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.143325 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 69 components and 0.143325 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.687 mas, bmaj=8.977 mas, bpa=2.002 degrees
! Estimated noise=0.459482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156204 Jy
! Component: 100  -  total flux cleaned = 0.00244139 Jy
! Component: 150  -  total flux cleaned = 0.00296938 Jy
! Component: 200  -  total flux cleaned = 0.00309648 Jy
! Total flux subtracted in 200 components = 0.00309648 Jy
! Clean residual min=-0.002140 max=0.001594 Jy/beam
! Clean residual mean=-0.000014 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.146421 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.27294e-05 Jy
! Component: 100  -  total flux cleaned = 0.000171396 Jy
! Component: 150  -  total flux cleaned = 0.000219977 Jy
! Component: 200  -  total flux cleaned = 0.000271413 Jy
! Total flux subtracted in 200 components = 0.000271413 Jy
! Clean residual min=-0.002109 max=0.001615 Jy/beam
! Clean residual mean=-0.000014 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.146693 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 109 components and 0.146693 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.341 mas, bmaj=6.528 mas, bpa=49.48 degrees
! Estimated noise=0.405498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194306 Jy
! Component: 100  -  total flux cleaned = 0.000144673 Jy
! Component: 150  -  total flux cleaned = 0.000100168 Jy
! Component: 200  -  total flux cleaned = 5.96241e-05 Jy
! Total flux subtracted in 200 components = 5.96241e-05 Jy
! Clean residual min=-0.001876 max=0.001665 Jy/beam
! Clean residual mean=-0.000008 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.146752 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 119 components and 0.146752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060235Jy  sigma=1.309823
! Fit after  self-cal, rms=0.060232Jy  sigma=1.309782
wmodel /J0623+4554_S_map.mod
! wmodel: Unable to open new model file: /J0623+4554_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0623+4554_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.341 x 6.528 at 49.48 degrees (North through East)
! Clean map  min=-0.0018476  max=0.10346 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0623+4554_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.103464 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000454337 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.31737 1.31737 2.63475 5.26949 10.539 21.078 42.156 84.3119
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.103 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  227.725 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0623+4554_S_dfm.log closed on Thu May 19 18:27:12 2016