! Started logfile: /scr/pima/bg219e_uvs/J0615+4819_X_dfm.log on Thu May 19 18:26:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0615+4819_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0615+4819_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.901235 visibilities/baseline/integration-bin.
! Found source: J0615+4819
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0615+4819_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015318Jy  sigma=24.028614
! Fit after  self-cal, rms=0.846250Jy  sigma=19.918682
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.049 mas, bmaj=1.438 mas, bpa=54.22 degrees
! Estimated noise=0.543221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112416 Jy
! Component: 100  -  total flux cleaned = 0.153686 Jy
! Total flux subtracted in 100 components = 0.153686 Jy
! Clean residual min=-0.010979 max=0.027014 Jy/beam
! Clean residual mean=0.000072 rms=0.003132 Jy/beam
! Combined flux in latest and established models = 0.153686 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.153686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083073Jy  sigma=1.913192
! Fit after  self-cal, rms=0.081538Jy  sigma=1.882153
! Inverting map 
! Added new window around map position (1.2, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029335 Jy
! Component: 100  -  total flux cleaned = 0.0456999 Jy
! Total flux subtracted in 100 components = 0.0456999 Jy
! Clean residual min=-0.005868 max=0.008866 Jy/beam
! Clean residual mean=0.000036 rms=0.001646 Jy/beam
! Combined flux in latest and established models = 0.199386 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.199386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067461Jy  sigma=1.529551
! Fit after  self-cal, rms=0.066502Jy  sigma=1.508100
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131006 Jy
! Component: 100  -  total flux cleaned = 0.0211784 Jy
! Total flux subtracted in 100 components = 0.0211784 Jy
! Clean residual min=-0.004105 max=0.004779 Jy/beam
! Clean residual mean=0.000019 rms=0.001023 Jy/beam
! Combined flux in latest and established models = 0.220564 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 24 components and 0.220564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062930Jy  sigma=1.417128
! Fit after  self-cal, rms=0.062719Jy  sigma=1.412426
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00661371 Jy
! Component: 100  -  total flux cleaned = 0.0107473 Jy
! Total flux subtracted in 100 components = 0.0107473 Jy
! Clean residual min=-0.003153 max=0.003389 Jy/beam
! Clean residual mean=0.000011 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.231311 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.231311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061766Jy  sigma=1.388183
! Fit after  self-cal, rms=0.061699Jy  sigma=1.386716
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.3 mas, bmaj=1.698 mas, bpa=50.45 degrees
! Estimated noise=0.278344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00472194 Jy
! Component: 100  -  total flux cleaned = 0.00743389 Jy
! Component: 150  -  total flux cleaned = 0.00919968 Jy
! Component: 200  -  total flux cleaned = 0.0103802 Jy
! Total flux subtracted in 200 components = 0.0103802 Jy
! Clean residual min=-0.002369 max=0.002679 Jy/beam
! Clean residual mean=0.000009 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.241692 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 50 components and 0.241692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061321Jy  sigma=1.377336
! Fit after  self-cal, rms=0.061290Jy  sigma=1.376649
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.3 x 1.698 at 50.45 degrees (North through East)
! Clean map  min=-0.0022916  max=0.14562 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.01     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.05     KP        1.00     
!   LA        0.97     NL        1.00     OV        0.99     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.97     KP        0.99     
!   LA        0.95     NL        0.98     OV        1.02     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.97     NL        1.02     OV        1.02     PT        1.01     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.05     KP        0.98     
!   LA        0.96     NL        1.00     OV        1.04     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.01     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.95     NL        0.98     OV        1.02     PT        1.06     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.99     NL        1.05     OV        1.00     PT        1.01     
!   SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.04     KP        1.00     
!   LA        0.97     NL        1.00     OV        1.01     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.02     KP        1.02     
!   LA        0.98     NL        1.02     OV        0.99     PT        1.04     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.99     KP        0.98     
!   LA        0.98     NL        1.04     OV        1.02     PT        1.01     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        0.99     
!   LA        1.00     NL        1.04     OV        1.03     PT        0.99     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.061290Jy  sigma=1.376649
! Fit after  self-cal, rms=0.061078Jy  sigma=1.370843
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.299 mas, bmaj=1.699 mas, bpa=50.43 degrees
! Estimated noise=0.278059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197289 Jy
! Component: 100  -  total flux cleaned = -0.000162709 Jy
! Component: 150  -  total flux cleaned = -0.000106344 Jy
! Component: 200  -  total flux cleaned = -0.000129063 Jy
! Total flux subtracted in 200 components = -0.000129063 Jy
! Clean residual min=-0.002245 max=0.002146 Jy/beam
! Clean residual mean=-0.000003 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.241563 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 59 components and 0.241562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061041Jy  sigma=1.370122
! Fit after  self-cal, rms=0.061033Jy  sigma=1.369898
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061033Jy  sigma=1.369898
! Fit after  self-cal, rms=0.060907Jy  sigma=1.364224
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.296 mas, bmaj=1.701 mas, bpa=51 degrees
! Estimated noise=0.278011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.22261e-05 Jy
! Component: 100  -  total flux cleaned = -0.00015282 Jy
! Component: 150  -  total flux cleaned = -0.00024922 Jy
! Component: 200  -  total flux cleaned = -0.000249382 Jy
! Total flux subtracted in 200 components = -0.000249382 Jy
! Clean residual min=-0.001808 max=0.001821 Jy/beam
! Clean residual mean=0.000012 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.241313 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.241313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060886Jy  sigma=1.363811
! Fit after  self-cal, rms=0.060884Jy  sigma=1.363664
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.26294e-05 Jy
! Component: 100  -  total flux cleaned = -6.54501e-05 Jy
! Component: 150  -  total flux cleaned = -3.45538e-05 Jy
! Component: 200  -  total flux cleaned = -3.39196e-05 Jy
! Total flux subtracted in 200 components = -3.39196e-05 Jy
! Clean residual min=-0.001808 max=0.001824 Jy/beam
! Clean residual mean=0.000012 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.241279 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.241279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060873Jy  sigma=1.363445
! Fit after  self-cal, rms=0.060871Jy  sigma=1.363388
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060871Jy  sigma=1.363388
! Fit after  self-cal, rms=0.060866Jy  sigma=1.363372
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.295 mas, bmaj=1.702 mas, bpa=51.09 degrees
! Estimated noise=0.277933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.52562e-05 Jy
! Component: 100  -  total flux cleaned = -4.25309e-05 Jy
! Component: 150  -  total flux cleaned = -4.21734e-05 Jy
! Component: 200  -  total flux cleaned = -5.56278e-05 Jy
! Total flux subtracted in 200 components = -5.56278e-05 Jy
! Clean residual min=-0.001799 max=0.001824 Jy/beam
! Clean residual mean=0.000012 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.241224 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 0.241224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060858Jy  sigma=1.363198
! Fit after  self-cal, rms=0.060857Jy  sigma=1.363168
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.5387e-05 Jy
! Component: 100  -  total flux cleaned = -8.63667e-06 Jy
! Component: 150  -  total flux cleaned = -8.59943e-06 Jy
! Component: 200  -  total flux cleaned = -8.67234e-06 Jy
! Total flux subtracted in 200 components = -8.67234e-06 Jy
! Clean residual min=-0.001786 max=0.001816 Jy/beam
! Clean residual mean=0.000012 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.241215 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 0.241215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060851Jy  sigma=1.363054
! Fit after  self-cal, rms=0.060850Jy  sigma=1.363035
! Inverting map 
! Added new window around map position (42.8, 6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160622 Jy
! Component: 100  -  total flux cleaned = 0.00186081 Jy
! Component: 150  -  total flux cleaned = 0.00203063 Jy
! Component: 200  -  total flux cleaned = 0.00209282 Jy
! Total flux subtracted in 200 components = 0.00209282 Jy
! Clean residual min=-0.001768 max=0.001667 Jy/beam
! Clean residual mean=0.000009 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.243308 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 90 components and 0.243308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060804Jy  sigma=1.361954
! Fit after  self-cal, rms=0.060801Jy  sigma=1.361888
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060801Jy  sigma=1.361888
! Fit after  self-cal, rms=0.060705Jy  sigma=1.361822
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.432 mas, bmaj=2.473 mas, bpa=-28.69 degrees
! Estimated noise=0.324753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358744 Jy
! Component: 100  -  total flux cleaned = 0.000344231 Jy
! Component: 150  -  total flux cleaned = 0.000316751 Jy
! Component: 200  -  total flux cleaned = 0.000279972 Jy
! Total flux subtracted in 200 components = 0.000279972 Jy
! Clean residual min=-0.001529 max=0.001611 Jy/beam
! Clean residual mean=0.000014 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.243588 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 104 components and 0.243588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060700Jy  sigma=1.361694
! Fit after  self-cal, rms=0.060700Jy  sigma=1.361683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.38781e-05 Jy
! Component: 100  -  total flux cleaned = 3.18908e-05 Jy
! Component: 150  -  total flux cleaned = 1.2843e-05 Jy
! Component: 200  -  total flux cleaned = 4.15482e-06 Jy
! Total flux subtracted in 200 components = 4.15482e-06 Jy
! Clean residual min=-0.001528 max=0.001589 Jy/beam
! Clean residual mean=0.000014 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.243592 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 0.243592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060698Jy  sigma=1.361630
! Fit after  self-cal, rms=0.060698Jy  sigma=1.361626
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.294 mas, bmaj=1.702 mas, bpa=51.22 degrees
! Estimated noise=0.277512 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.294 x 1.702 at 51.22 degrees (North through East)
! Clean map  min=-0.0016527  max=0.14463 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=1.447 mas, bpa=54.74 degrees
! Estimated noise=0.540983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114695 Jy
! Component: 100  -  total flux cleaned = 0.163226 Jy
! Component: 150  -  total flux cleaned = 0.187835 Jy
! Component: 200  -  total flux cleaned = 0.202997 Jy
! Total flux subtracted in 200 components = 0.202997 Jy
! Clean residual min=-0.004386 max=0.008210 Jy/beam
! Clean residual mean=0.000032 rms=0.001180 Jy/beam
! Combined flux in latest and established models = 0.202997 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.202997 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.294 mas, bmaj=1.702 mas, bpa=51.22 degrees
! Estimated noise=0.277512 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145795 Jy
! Component: 100  -  total flux cleaned = 0.0228829 Jy
! Component: 150  -  total flux cleaned = 0.0279451 Jy
! Component: 200  -  total flux cleaned = 0.0311604 Jy
! Total flux subtracted in 200 components = 0.0311604 Jy
! Clean residual min=-0.002042 max=0.001981 Jy/beam
! Clean residual mean=0.000028 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.234157 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.234157 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.432 mas, bmaj=2.473 mas, bpa=-28.69 degrees
! Estimated noise=0.324753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00299154 Jy
! Component: 100  -  total flux cleaned = 0.00480681 Jy
! Component: 150  -  total flux cleaned = 0.00606937 Jy
! Component: 200  -  total flux cleaned = 0.00699715 Jy
! Total flux subtracted in 200 components = 0.00699715 Jy
! Clean residual min=-0.001676 max=0.001567 Jy/beam
! Clean residual mean=0.000024 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.241154 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567267 Jy
! Component: 100  -  total flux cleaned = 0.000889942 Jy
! Component: 150  -  total flux cleaned = 0.00114784 Jy
! Component: 200  -  total flux cleaned = 0.00138662 Jy
! Total flux subtracted in 200 components = 0.00138662 Jy
! Clean residual min=-0.001627 max=0.001596 Jy/beam
! Clean residual mean=0.000019 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.242541 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 87 components and 0.242541 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.294 mas, bmaj=1.702 mas, bpa=51.22 degrees
! Estimated noise=0.277512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421821 Jy
! Component: 100  -  total flux cleaned = 0.000532729 Jy
! Component: 150  -  total flux cleaned = 0.000606266 Jy
! Component: 200  -  total flux cleaned = 0.000718409 Jy
! Total flux subtracted in 200 components = 0.000718409 Jy
! Clean residual min=-0.001657 max=0.001542 Jy/beam
! Clean residual mean=0.000008 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.243259 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.243259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060695Jy  sigma=1.361602
! Fit after  self-cal, rms=0.060686Jy  sigma=1.361447
wmodel /J0615+4819_X_map.mod
! wmodel: Unable to open new model file: /J0615+4819_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0615+4819_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.294 x 1.702 at 51.22 degrees (North through East)
! Clean map  min=-0.001541  max=0.14486 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0615+4819_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.14486 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00037919 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.78529 0.78529 1.57058 3.14116 6.28232 12.5646 25.1293 50.2586
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.144 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  382.024 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0615+4819_X_dfm.log closed on Thu May 19 18:26:38 2016