! Started logfile: /scr/pima/bg219e_uvs/J0559+5804_S_uvs.log on Thu Apr 7 06:37:12 2016 obs /scr/pima/bg219e_uvs/J0559+5804_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0559+5804_S_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.881944 visibilities/baseline/integration-bin. ! Found source: J0559+5804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 5080 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0559+5804_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.040553Jy sigma=21.913014 ! Fit after self-cal, rms=0.679525Jy sigma=14.221661 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.95 mas, bmaj=6.146 mas, bpa=69.91 degrees ! Estimated noise=0.784174 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2436 Jy ! Component: 100 - total flux cleaned = 0.315832 Jy ! Total flux subtracted in 100 components = 0.315832 Jy ! Clean residual min=-0.011219 max=0.030000 Jy/beam ! Clean residual mean=-0.000239 rms=0.003263 Jy/beam ! Combined flux in latest and established models = 0.315832 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.315832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080524Jy sigma=1.633261 ! Fit after self-cal, rms=0.080205Jy sigma=1.627704 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312038 Jy ! Component: 100 - total flux cleaned = 0.0450551 Jy ! Total flux subtracted in 100 components = 0.0450551 Jy ! Clean residual min=-0.005671 max=0.008935 Jy/beam ! Clean residual mean=-0.000117 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.360888 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.360888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066966Jy sigma=1.338414 ! Fit after self-cal, rms=0.066748Jy sigma=1.334761 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.742 mas, bmaj=7.064 mas, bpa=68.37 degrees ! Estimated noise=0.485842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119868 Jy ! Component: 100 - total flux cleaned = 0.0194892 Jy ! Component: 150 - total flux cleaned = 0.024618 Jy ! Component: 200 - total flux cleaned = 0.0282255 Jy ! Total flux subtracted in 200 components = 0.0282255 Jy ! Clean residual min=-0.003892 max=0.004221 Jy/beam ! Clean residual mean=-0.000047 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.389113 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 45 components and 0.389113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064352Jy sigma=1.280093 ! Fit after self-cal, rms=0.064165Jy sigma=1.276139 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.742 x 7.064 at 68.37 degrees (North through East) ! Clean map min=-0.0039747 max=0.31921 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 0.98 ! LA 0.98 NL 1.01 OV 0.98 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.98 KP 0.98 ! LA 0.99 NL 0.99 OV 0.98 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.99 KP 0.98 ! LA 0.99 NL 0.99 OV 1.00 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.01 KP 1.01 ! LA 1.00 NL 0.99 OV 1.01 PT 1.02 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.064165Jy sigma=1.276139 ! Fit after self-cal, rms=0.063327Jy sigma=1.263447 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.737 mas, bmaj=7.061 mas, bpa=68.38 degrees ! Estimated noise=0.482616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341343 Jy ! Component: 100 - total flux cleaned = 0.00539553 Jy ! Component: 150 - total flux cleaned = 0.00614337 Jy ! Component: 200 - total flux cleaned = 0.00628161 Jy ! Total flux subtracted in 200 components = 0.00628161 Jy ! Clean residual min=-0.002557 max=0.003353 Jy/beam ! Clean residual mean=-0.000026 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.395395 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 75 components and 0.395395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063128Jy sigma=1.258954 ! Fit after self-cal, rms=0.063114Jy sigma=1.258531 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063114Jy sigma=1.258531 ! Fit after self-cal, rms=0.062752Jy sigma=1.251732 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.717 mas, bmaj=7.072 mas, bpa=68.28 degrees ! Estimated noise=0.482268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175936 Jy ! Component: 100 - total flux cleaned = 0.00221044 Jy ! Component: 150 - total flux cleaned = 0.00243184 Jy ! Component: 200 - total flux cleaned = 0.00259309 Jy ! Total flux subtracted in 200 components = 0.00259309 Jy ! Clean residual min=-0.002174 max=0.002865 Jy/beam ! Clean residual mean=-0.000014 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.397988 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.397988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062685Jy sigma=1.250344 ! Fit after self-cal, rms=0.062684Jy sigma=1.250169 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-33, 18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278686 Jy ! Component: 100 - total flux cleaned = 0.0043015 Jy ! Component: 150 - total flux cleaned = 0.00480621 Jy ! Component: 200 - total flux cleaned = 0.00508342 Jy ! Total flux subtracted in 200 components = 0.00508342 Jy ! Clean residual min=-0.002033 max=0.002404 Jy/beam ! Clean residual mean=-0.000012 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.403071 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 123 components and 0.403071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062549Jy sigma=1.247168 ! Fit after self-cal, rms=0.062542Jy sigma=1.247066 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062542Jy sigma=1.247066 ! Fit after self-cal, rms=0.062451Jy sigma=1.246957 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.711 mas, bmaj=7.072 mas, bpa=68.24 degrees ! Estimated noise=0.481759 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661402 Jy ! Component: 100 - total flux cleaned = 0.000835098 Jy ! Component: 150 - total flux cleaned = 0.000927751 Jy ! Component: 200 - total flux cleaned = 0.00103915 Jy ! Total flux subtracted in 200 components = 0.00103915 Jy ! Clean residual min=-0.001938 max=0.002372 Jy/beam ! Clean residual mean=-0.000014 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.40411 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 142 components and 0.40411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062418Jy sigma=1.246300 ! Fit after self-cal, rms=0.062418Jy sigma=1.246274 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50, -45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022657 Jy ! Component: 100 - total flux cleaned = 0.0031343 Jy ! Component: 150 - total flux cleaned = 0.00350999 Jy ! Component: 200 - total flux cleaned = 0.00391074 Jy ! Total flux subtracted in 200 components = 0.00391074 Jy ! Clean residual min=-0.001798 max=0.001926 Jy/beam ! Clean residual mean=-0.000007 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.408021 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 163 components and 0.408021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062327Jy sigma=1.244285 ! Fit after self-cal, rms=0.062320Jy sigma=1.244197 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062320Jy sigma=1.244197 ! Fit after self-cal, rms=0.062260Jy sigma=1.244097 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.369 mas, bmaj=9.652 mas, bpa=75.45 degrees ! Estimated noise=0.558302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596456 Jy ! Component: 100 - total flux cleaned = 0.00101522 Jy ! Component: 150 - total flux cleaned = 0.00126035 Jy ! Component: 200 - total flux cleaned = 0.00137919 Jy ! Total flux subtracted in 200 components = 0.00137919 Jy ! Clean residual min=-0.002060 max=0.002120 Jy/beam ! Clean residual mean=-0.000008 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.4094 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 189 components and 0.4094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062243Jy sigma=1.243711 ! Fit after self-cal, rms=0.062243Jy sigma=1.243693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178374 Jy ! Component: 100 - total flux cleaned = 0.000321975 Jy ! Component: 150 - total flux cleaned = 0.000414852 Jy ! Component: 200 - total flux cleaned = 0.000483969 Jy ! Total flux subtracted in 200 components = 0.000483969 Jy ! Clean residual min=-0.002003 max=0.002076 Jy/beam ! Clean residual mean=-0.000005 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.409884 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 207 components and 0.409884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062236Jy sigma=1.243532 ! Fit after self-cal, rms=0.062237Jy sigma=1.243524 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.709 mas, bmaj=7.074 mas, bpa=68.2 degrees ! Estimated noise=0.481313 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.709 x 7.074 at 68.2 degrees (North through East) ! Clean map min=-0.0018198 max=0.31727 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=6.156 mas, bpa=69.63 degrees ! Estimated noise=0.776392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.241323 Jy ! Component: 100 - total flux cleaned = 0.315044 Jy ! Component: 150 - total flux cleaned = 0.34624 Jy ! Component: 200 - total flux cleaned = 0.360981 Jy ! Total flux subtracted in 200 components = 0.360981 Jy ! Clean residual min=-0.005665 max=0.007695 Jy/beam ! Clean residual mean=-0.000106 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.360981 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.360981 Jy ! Inverting map and beam ! Estimated beam: bmin=4.709 mas, bmaj=7.074 mas, bpa=68.2 degrees ! Estimated noise=0.481313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119702 Jy ! Component: 100 - total flux cleaned = 0.0198376 Jy ! Component: 150 - total flux cleaned = 0.0254409 Jy ! Component: 200 - total flux cleaned = 0.0296346 Jy ! Total flux subtracted in 200 components = 0.0296346 Jy ! Clean residual min=-0.002825 max=0.002573 Jy/beam ! Clean residual mean=-0.000041 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.390616 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 47 components and 0.390616 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.369 mas, bmaj=9.652 mas, bpa=75.45 degrees ! Estimated noise=0.558302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443676 Jy ! Component: 100 - total flux cleaned = 0.00765796 Jy ! Component: 150 - total flux cleaned = 0.0101432 Jy ! Component: 200 - total flux cleaned = 0.0117572 Jy ! Total flux subtracted in 200 components = 0.0117572 Jy ! Clean residual min=-0.002637 max=0.002360 Jy/beam ! Clean residual mean=-0.000036 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.402373 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123578 Jy ! Component: 100 - total flux cleaned = 0.00219665 Jy ! Component: 150 - total flux cleaned = 0.00314376 Jy ! Component: 200 - total flux cleaned = 0.00392559 Jy ! Total flux subtracted in 200 components = 0.00392559 Jy ! Clean residual min=-0.002319 max=0.002265 Jy/beam ! Clean residual mean=-0.000021 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.406299 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 111 components and 0.406299 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.709 mas, bmaj=7.074 mas, bpa=68.2 degrees ! Estimated noise=0.481313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105846 Jy ! Component: 100 - total flux cleaned = 0.00147716 Jy ! Component: 150 - total flux cleaned = 0.00168717 Jy ! Component: 200 - total flux cleaned = 0.00191744 Jy ! Total flux subtracted in 200 components = 0.00191744 Jy ! Clean residual min=-0.001916 max=0.001988 Jy/beam ! Clean residual mean=-0.000007 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.408216 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 134 components and 0.408216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062308Jy sigma=1.244819 ! Fit after self-cal, rms=0.062284Jy sigma=1.244462 wmodel /scr/pima/bg219e_uvs/J0559+5804_S_map.mod ! Writing 134 model components to file: /scr/pima/bg219e_uvs/J0559+5804_S_map.mod wobs /scr/pima/bg219e_uvs/J0559+5804_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J0559+5804_S_uvs.fits wwins /scr/pima/bg219e_uvs/J0559+5804_S_map.win ! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J0559+5804_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165403 Jy ! Component: 100 - total flux cleaned = -0.000528648 Jy ! Component: 150 - total flux cleaned = -0.000808645 Jy ! Component: 200 - total flux cleaned = -0.00104625 Jy ! Component: 250 - total flux cleaned = -0.00124508 Jy ! Component: 300 - total flux cleaned = -0.0013811 Jy ! Component: 350 - total flux cleaned = -0.00148702 Jy ! Component: 400 - total flux cleaned = -0.00156455 Jy ! Component: 450 - total flux cleaned = -0.00166461 Jy ! Component: 500 - total flux cleaned = -0.00173824 Jy ! Component: 550 - total flux cleaned = -0.00176208 Jy ! Component: 600 - total flux cleaned = -0.00183284 Jy ! Component: 650 - total flux cleaned = -0.00185564 Jy ! Component: 700 - total flux cleaned = -0.00187848 Jy ! Component: 750 - total flux cleaned = -0.00194523 Jy ! Component: 800 - total flux cleaned = -0.00190133 Jy ! Component: 850 - total flux cleaned = -0.00194457 Jy ! Component: 900 - total flux cleaned = -0.00192329 Jy ! Component: 950 - total flux cleaned = -0.00192338 Jy ! Component: 1000 - total flux cleaned = -0.00192347 Jy ! Component: 1050 - total flux cleaned = -0.00196399 Jy ! Component: 1100 - total flux cleaned = -0.00190385 Jy ! Component: 1150 - total flux cleaned = -0.00198289 Jy ! Component: 1200 - total flux cleaned = -0.00194385 Jy ! Component: 1250 - total flux cleaned = -0.00198229 Jy ! Component: 1300 - total flux cleaned = -0.00196331 Jy ! Component: 1350 - total flux cleaned = -0.00198211 Jy ! Component: 1400 - total flux cleaned = -0.00203755 Jy ! Component: 1450 - total flux cleaned = -0.00201939 Jy ! Component: 1500 - total flux cleaned = -0.00200129 Jy ! Component: 1550 - total flux cleaned = -0.00193012 Jy ! Component: 1600 - total flux cleaned = -0.00191227 Jy ! Component: 1650 - total flux cleaned = -0.00189494 Jy ! Component: 1700 - total flux cleaned = -0.00182633 Jy ! Component: 1750 - total flux cleaned = -0.00182651 Jy ! Component: 1800 - total flux cleaned = -0.00179289 Jy ! Component: 1850 - total flux cleaned = -0.00177622 Jy ! Component: 1900 - total flux cleaned = -0.00176011 Jy ! Component: 1950 - total flux cleaned = -0.00174388 Jy ! Component: 2000 - total flux cleaned = -0.00171188 Jy ! Component: 2050 - total flux cleaned = -0.00171207 Jy ! Component: 2100 - total flux cleaned = -0.00174363 Jy ! Component: 2150 - total flux cleaned = -0.00172843 Jy ! Component: 2200 - total flux cleaned = -0.00175929 Jy ! Component: 2250 - total flux cleaned = -0.00177449 Jy ! Component: 2300 - total flux cleaned = -0.00175932 Jy ! Component: 2350 - total flux cleaned = -0.00174453 Jy ! Component: 2400 - total flux cleaned = -0.001819 Jy ! Component: 2450 - total flux cleaned = -0.00184828 Jy ! Component: 2500 - total flux cleaned = -0.00183387 Jy ! Component: 2550 - total flux cleaned = -0.00186278 Jy ! Component: 2600 - total flux cleaned = -0.00187705 Jy ! Component: 2650 - total flux cleaned = -0.00183432 Jy ! Component: 2700 - total flux cleaned = -0.00183435 Jy ! Component: 2750 - total flux cleaned = -0.00184844 Jy ! Component: 2800 - total flux cleaned = -0.00189007 Jy ! Component: 2850 - total flux cleaned = -0.00184875 Jy ! Component: 2900 - total flux cleaned = -0.0018351 Jy ! Component: 2950 - total flux cleaned = -0.00186223 Jy ! Component: 3000 - total flux cleaned = -0.00187552 Jy ! Component: 3050 - total flux cleaned = -0.00182201 Jy ! Component: 3100 - total flux cleaned = -0.00186165 Jy ! Component: 3150 - total flux cleaned = -0.00179588 Jy ! Component: 3200 - total flux cleaned = -0.0017959 Jy ! Component: 3250 - total flux cleaned = -0.00179586 Jy ! Component: 3300 - total flux cleaned = -0.00183454 Jy ! Component: 3350 - total flux cleaned = -0.00180907 Jy ! Component: 3400 - total flux cleaned = -0.00185972 Jy ! Component: 3450 - total flux cleaned = -0.00183448 Jy ! Component: 3500 - total flux cleaned = -0.00182205 Jy ! Component: 3550 - total flux cleaned = -0.00183456 Jy ! Component: 3600 - total flux cleaned = -0.00184687 Jy ! Component: 3650 - total flux cleaned = -0.00185918 Jy ! Component: 3700 - total flux cleaned = -0.00191985 Jy ! Component: 3750 - total flux cleaned = -0.00190766 Jy ! Component: 3800 - total flux cleaned = -0.00191961 Jy ! Component: 3850 - total flux cleaned = -0.00193145 Jy ! Component: 3900 - total flux cleaned = -0.00193139 Jy ! Component: 3950 - total flux cleaned = -0.00195492 Jy ! Component: 4000 - total flux cleaned = -0.0019316 Jy ! Component: 4050 - total flux cleaned = -0.00196644 Jy ! Total flux subtracted in 4096 components = -0.0019895 Jy ! Clean residual min=-0.000644 max=0.000757 Jy/beam ! Clean residual mean=-0.000004 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.406227 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 420 components and 0.406226 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J0559+5804_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.709 x 7.074 at 68.2 degrees (North through East) ! Clean map min=-0.0015432 max=0.31573 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0559+5804_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.315729 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.199781 0.199781 0.399563 0.799126 1.59825 3.1965 6.39301 12.786 25.572 51.1441 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.315 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1501.64 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0559+5804_S_uvs.log closed on Thu Apr 7 06:37:16 2016