! Started logfile: /scr/pima/bg219e_uvs/J0539-0514_S_dfm.log on Thu May 19 18:25:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0539-0514_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0539-0514_S_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.679211 visibilities/baseline/integration-bin.
! Found source: J0539-0514
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6064 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0539-0514_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.032890Jy  sigma=19.111581
! Fit after  self-cal, rms=0.944108Jy  sigma=17.917577
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.317 mas, bmaj=11.07 mas, bpa=-0.05728 degrees
! Estimated noise=0.740049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0501593 Jy
! Component: 100  -  total flux cleaned = 0.061457 Jy
! Total flux subtracted in 100 components = 0.061457 Jy
! Clean residual min=-0.005426 max=0.008211 Jy/beam
! Clean residual mean=-0.000001 rms=0.001657 Jy/beam
! Combined flux in latest and established models = 0.061457 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.061457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220357Jy  sigma=1.332289
! Fit after  self-cal, rms=0.219619Jy  sigma=1.294595
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.017 mas, bmaj=12.27 mas, bpa=-0.1917 degrees
! Estimated noise=0.559121 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00583758 Jy
! Component: 100  -  total flux cleaned = 0.00808975 Jy
! Component: 150  -  total flux cleaned = 0.00808729 Jy
! Component: 200  -  total flux cleaned = 0.00796316 Jy
! Total flux subtracted in 200 components = 0.00796316 Jy
! Clean residual min=-0.005154 max=0.006064 Jy/beam
! Clean residual mean=-0.000001 rms=0.001358 Jy/beam
! Combined flux in latest and established models = 0.0694201 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 41 components and 0.0694201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.218898Jy  sigma=1.293216
! Fit after  self-cal, rms=0.218826Jy  sigma=1.292810
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.017 x 12.27 at -0.1917 degrees (North through East)
! Clean map  min=-0.0050918  max=0.066711 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.04     KP        1.03     
!   LA        0.98     NL        1.07     OV        1.04     PT        0.99     
!   SC        0.88     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.01     HN        1.09     KP        1.06     
!   LA        0.93     NL        1.04     OV        1.11     PT        1.09     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.89     HN        0.99     KP        0.98     
!   LA        1.05     NL        0.90     OV        1.13     PT        0.97     
!   SC        0.90     
! 
! 
! Fit before self-cal, rms=0.218826Jy  sigma=1.292810
! Fit after  self-cal, rms=0.243666Jy  sigma=1.288362
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.042 mas, bmaj=12.13 mas, bpa=0.05563 degrees
! Estimated noise=0.578651 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151191 Jy
! Component: 100  -  total flux cleaned = 0.00173976 Jy
! Component: 150  -  total flux cleaned = 0.00150272 Jy
! Component: 200  -  total flux cleaned = 0.0012313 Jy
! Total flux subtracted in 200 components = 0.0012313 Jy
! Clean residual min=-0.005270 max=0.006097 Jy/beam
! Clean residual mean=-0.000004 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 0.0706514 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 51 components and 0.0706514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243331Jy  sigma=1.289528
! Fit after  self-cal, rms=0.243554Jy  sigma=1.289086
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243554Jy  sigma=1.289086
! Fit after  self-cal, rms=0.244058Jy  sigma=1.286303
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.04 mas, bmaj=12.07 mas, bpa=0.00705 degrees
! Estimated noise=0.594767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133686 Jy
! Component: 100  -  total flux cleaned = 0.00115375 Jy
! Component: 150  -  total flux cleaned = 0.000830866 Jy
! Component: 200  -  total flux cleaned = 0.000578866 Jy
! Total flux subtracted in 200 components = 0.000578866 Jy
! Clean residual min=-0.005022 max=0.005590 Jy/beam
! Clean residual mean=-0.000004 rms=0.001307 Jy/beam
! Combined flux in latest and established models = 0.0712303 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 57 components and 0.0712302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243810Jy  sigma=1.287296
! Fit after  self-cal, rms=0.243822Jy  sigma=1.287130
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000289729 Jy
! Component: 100  -  total flux cleaned = -0.000520943 Jy
! Component: 150  -  total flux cleaned = -0.000735108 Jy
! Component: 200  -  total flux cleaned = -0.000935471 Jy
! Total flux subtracted in 200 components = -0.000935471 Jy
! Clean residual min=-0.005046 max=0.005707 Jy/beam
! Clean residual mean=-0.000004 rms=0.001317 Jy/beam
! Combined flux in latest and established models = 0.0702948 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 68 components and 0.0702948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243733Jy  sigma=1.287223
! Fit after  self-cal, rms=0.244121Jy  sigma=1.287074
! Inverting map 
! Added new window around map position (34.5, -47.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150296 Jy
! Component: 100  -  total flux cleaned = 0.000394964 Jy
! Component: 150  -  total flux cleaned = -0.000608233 Jy
! Component: 200  -  total flux cleaned = -0.00127551 Jy
! Total flux subtracted in 200 components = -0.00127551 Jy
! Clean residual min=-0.004228 max=0.004921 Jy/beam
! Clean residual mean=-0.000001 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 0.0690193 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.0690193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243612Jy  sigma=1.284192
! Fit after  self-cal, rms=0.243592Jy  sigma=1.282872
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243592Jy  sigma=1.282872
! Fit after  self-cal, rms=0.243799Jy  sigma=1.282404
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.028 mas, bmaj=12.08 mas, bpa=-0.05161 degrees
! Estimated noise=0.599009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000380453 Jy
! Component: 100  -  total flux cleaned = -0.000234436 Jy
! Component: 150  -  total flux cleaned = -0.000685699 Jy
! Component: 200  -  total flux cleaned = -0.0012287 Jy
! Total flux subtracted in 200 components = -0.0012287 Jy
! Clean residual min=-0.004069 max=0.004454 Jy/beam
! Clean residual mean=-0.000000 rms=0.001211 Jy/beam
! Combined flux in latest and established models = 0.0677906 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 99 components and 0.0677906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243488Jy  sigma=1.282268
! Fit after  self-cal, rms=0.243479Jy  sigma=1.281850
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000288826 Jy
! Component: 100  -  total flux cleaned = -0.000812907 Jy
! Component: 150  -  total flux cleaned = -0.00122221 Jy
! Component: 200  -  total flux cleaned = -0.00143841 Jy
! Total flux subtracted in 200 components = -0.00143841 Jy
! Clean residual min=-0.004124 max=0.004515 Jy/beam
! Clean residual mean=0.000000 rms=0.001200 Jy/beam
! Combined flux in latest and established models = 0.0663522 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 109 components and 0.0663522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243315Jy  sigma=1.281958
! Fit after  self-cal, rms=0.243299Jy  sigma=1.281809
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243299Jy  sigma=1.281809
! Fit after  self-cal, rms=0.243397Jy  sigma=1.280544
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.268 mas, bmaj=14.72 mas, bpa=1.256 degrees
! Estimated noise=0.648486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011056 Jy
! Component: 100  -  total flux cleaned = -1.32217e-05 Jy
! Component: 150  -  total flux cleaned = -0.000123007 Jy
! Component: 200  -  total flux cleaned = -0.00027666 Jy
! Total flux subtracted in 200 components = -0.00027666 Jy
! Clean residual min=-0.003947 max=0.004790 Jy/beam
! Clean residual mean=-0.000001 rms=0.001266 Jy/beam
! Combined flux in latest and established models = 0.0660755 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 122 components and 0.0660755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243262Jy  sigma=1.280895
! Fit after  self-cal, rms=0.243257Jy  sigma=1.280664
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010266 Jy
! Component: 100  -  total flux cleaned = -0.000248855 Jy
! Component: 150  -  total flux cleaned = -0.000432391 Jy
! Component: 200  -  total flux cleaned = -0.000604681 Jy
! Total flux subtracted in 200 components = -0.000604681 Jy
! Clean residual min=-0.003942 max=0.004711 Jy/beam
! Clean residual mean=-0.000001 rms=0.001258 Jy/beam
! Combined flux in latest and established models = 0.0654708 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 128 components and 0.0654708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243179Jy  sigma=1.280837
! Fit after  self-cal, rms=0.243171Jy  sigma=1.280778
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.02 mas, bmaj=12.08 mas, bpa=-0.1289 degrees
! Estimated noise=0.600976 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.02 x 12.08 at -0.1289 degrees (North through East)
! Clean map  min=-0.00888  max=0.073908 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.3 mas, bmaj=10.87 mas, bpa=0.1213 degrees
! Estimated noise=0.796419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0557027 Jy
! Component: 100  -  total flux cleaned = 0.070156 Jy
! Component: 150  -  total flux cleaned = 0.0728672 Jy
! Component: 200  -  total flux cleaned = 0.0725856 Jy
! Total flux subtracted in 200 components = 0.0725856 Jy
! Clean residual min=-0.005328 max=0.005910 Jy/beam
! Clean residual mean=-0.000007 rms=0.001537 Jy/beam
! Combined flux in latest and established models = 0.0725856 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0725856 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.02 mas, bmaj=12.08 mas, bpa=-0.1289 degrees
! Estimated noise=0.600976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00116573 Jy
! Component: 100  -  total flux cleaned = -0.00165298 Jy
! Component: 150  -  total flux cleaned = -0.0020712 Jy
! Component: 200  -  total flux cleaned = -0.00243813 Jy
! Total flux subtracted in 200 components = -0.00243813 Jy
! Clean residual min=-0.004189 max=0.005004 Jy/beam
! Clean residual mean=-0.000002 rms=0.001228 Jy/beam
! Combined flux in latest and established models = 0.0701475 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 39 components and 0.0701475 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.268 mas, bmaj=14.72 mas, bpa=1.256 degrees
! Estimated noise=0.648486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367357 Jy
! Component: 100  -  total flux cleaned = -0.00106668 Jy
! Component: 150  -  total flux cleaned = -0.00179026 Jy
! Component: 200  -  total flux cleaned = -0.00236782 Jy
! Total flux subtracted in 200 components = -0.00236782 Jy
! Clean residual min=-0.004056 max=0.004963 Jy/beam
! Clean residual mean=-0.000001 rms=0.001298 Jy/beam
! Combined flux in latest and established models = 0.0677796 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000308627 Jy
! Component: 100  -  total flux cleaned = -0.000667599 Jy
! Component: 150  -  total flux cleaned = -0.000867131 Jy
! Component: 200  -  total flux cleaned = -0.00112306 Jy
! Total flux subtracted in 200 components = -0.00112306 Jy
! Clean residual min=-0.003922 max=0.004822 Jy/beam
! Clean residual mean=-0.000001 rms=0.001281 Jy/beam
! Combined flux in latest and established models = 0.0666566 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 71 components and 0.0666566 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.02 mas, bmaj=12.08 mas, bpa=-0.1289 degrees
! Estimated noise=0.600976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.55203e-05 Jy
! Component: 100  -  total flux cleaned = -0.000272535 Jy
! Component: 150  -  total flux cleaned = -0.000441891 Jy
! Component: 200  -  total flux cleaned = -0.000652617 Jy
! Total flux subtracted in 200 components = -0.000652617 Jy
! Clean residual min=-0.003971 max=0.004578 Jy/beam
! Clean residual mean=-0.000000 rms=0.001191 Jy/beam
! Combined flux in latest and established models = 0.066004 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.066004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243191Jy  sigma=1.281419
! Fit after  self-cal, rms=0.243262Jy  sigma=1.281158
wmodel /J0539-0514_S_map.mod
! wmodel: Unable to open new model file: /J0539-0514_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0539-0514_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.02 x 12.08 at -0.1289 degrees (North through East)
! Clean map  min=-0.009034  max=0.073787 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0539-0514_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.073787 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00117912 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.794 4.794 9.588 19.176 38.352 76.704
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0035 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  62.578 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0539-0514_S_dfm.log closed on Thu May 19 18:25:33 2016