! Started logfile: /scr/pima/bg219e_uvs/J0532-0307_X_dfm.log on Thu May 19 18:25:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0532-0307_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0532-0307_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.866512 visibilities/baseline/integration-bin.
! Found source: J0532-0307
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13476 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0532-0307_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.038638Jy  sigma=22.970461
! Fit after  self-cal, rms=0.711424Jy  sigma=15.611925
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8709 mas, bmaj=2.592 mas, bpa=19.8 degrees
! Estimated noise=0.515115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221971 Jy
! Component: 100  -  total flux cleaned = 0.276076 Jy
! Total flux subtracted in 100 components = 0.276076 Jy
! Clean residual min=-0.009102 max=0.022573 Jy/beam
! Clean residual mean=0.000007 rms=0.002680 Jy/beam
! Combined flux in latest and established models = 0.276076 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.276076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078439Jy  sigma=1.669069
! Fit after  self-cal, rms=0.078433Jy  sigma=1.668721
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0252284 Jy
! Component: 100  -  total flux cleaned = 0.0386386 Jy
! Total flux subtracted in 100 components = 0.0386386 Jy
! Clean residual min=-0.006171 max=0.011433 Jy/beam
! Clean residual mean=0.000005 rms=0.001584 Jy/beam
! Combined flux in latest and established models = 0.314714 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 11 components and 0.314714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068565Jy  sigma=1.435882
! Fit after  self-cal, rms=0.068544Jy  sigma=1.434932
! Inverting map 
! Added new window around map position (7.8, 4.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107635 Jy
! Component: 100  -  total flux cleaned = 0.0182024 Jy
! Total flux subtracted in 100 components = 0.0182024 Jy
! Clean residual min=-0.005304 max=0.005604 Jy/beam
! Clean residual mean=0.000004 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.332917 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 29 components and 0.332917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065971Jy  sigma=1.373240
! Fit after  self-cal, rms=0.065795Jy  sigma=1.369722
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.122 mas, bmaj=2.725 mas, bpa=16.65 degrees
! Estimated noise=0.303374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101812 Jy
! Component: 100  -  total flux cleaned = 0.0169488 Jy
! Component: 150  -  total flux cleaned = 0.0218857 Jy
! Component: 200  -  total flux cleaned = 0.0256559 Jy
! Total flux subtracted in 200 components = 0.0256559 Jy
! Clean residual min=-0.003307 max=0.003858 Jy/beam
! Clean residual mean=0.000004 rms=0.000899 Jy/beam
! Combined flux in latest and established models = 0.358573 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 61 components and 0.358573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063896Jy  sigma=1.323553
! Fit after  self-cal, rms=0.063726Jy  sigma=1.319704
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.122 x 2.725 at 16.65 degrees (North through East)
! Clean map  min=-0.0029016  max=0.29177 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        1.02     
!   LA        1.00     NL        0.99     OV        0.98     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        1.01     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.00     
!   LA        0.97     NL        0.99     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.96     NL        1.01     OV        1.00     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.96     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        0.99     
!   LA        0.97     NL        0.99     OV        0.99     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        0.99     
!   LA        0.97     NL        1.00     OV        0.99     PT        1.03     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.03     KP        1.00     
!   LA        0.96     NL        0.99     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.96     NL        1.01     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.97     NL        1.01     OV        0.99     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.03     KP        0.99     
!   LA        0.96     NL        1.00     OV        0.97     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.01     
!   LA        0.97     NL        1.00     OV        0.97     PT        1.01     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.063726Jy  sigma=1.319704
! Fit after  self-cal, rms=0.063060Jy  sigma=1.309354
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=2.735 mas, bpa=16.64 degrees
! Estimated noise=0.301492 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00344765 Jy
! Component: 100  -  total flux cleaned = 0.00564994 Jy
! Component: 150  -  total flux cleaned = 0.00690165 Jy
! Component: 200  -  total flux cleaned = 0.00742062 Jy
! Total flux subtracted in 200 components = 0.00742062 Jy
! Clean residual min=-0.002023 max=0.002289 Jy/beam
! Clean residual mean=0.000002 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.365993 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 90 components and 0.365993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062831Jy  sigma=1.304150
! Fit after  self-cal, rms=0.062806Jy  sigma=1.303294
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062806Jy  sigma=1.303294
! Fit after  self-cal, rms=0.062685Jy  sigma=1.297738
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=2.735 mas, bpa=16.62 degrees
! Estimated noise=0.301756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192959 Jy
! Component: 100  -  total flux cleaned = 0.00290964 Jy
! Component: 150  -  total flux cleaned = 0.00328558 Jy
! Component: 200  -  total flux cleaned = 0.00358141 Jy
! Total flux subtracted in 200 components = 0.00358141 Jy
! Clean residual min=-0.001512 max=0.001681 Jy/beam
! Clean residual mean=0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.369575 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 111 components and 0.369575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062611Jy  sigma=1.296256
! Fit after  self-cal, rms=0.062600Jy  sigma=1.295956
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010255 Jy
! Component: 100  -  total flux cleaned = 0.00125315 Jy
! Component: 150  -  total flux cleaned = 0.00152267 Jy
! Component: 200  -  total flux cleaned = 0.00174164 Jy
! Total flux subtracted in 200 components = 0.00174164 Jy
! Clean residual min=-0.001472 max=0.001532 Jy/beam
! Clean residual mean=0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.371317 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 119 components and 0.371316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062573Jy  sigma=1.295456
! Fit after  self-cal, rms=0.062571Jy  sigma=1.295392
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062571Jy  sigma=1.295392
! Fit after  self-cal, rms=0.062560Jy  sigma=1.295157
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=2.735 mas, bpa=16.61 degrees
! Estimated noise=0.30181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000808471 Jy
! Component: 100  -  total flux cleaned = 0.00108195 Jy
! Component: 150  -  total flux cleaned = 0.00133869 Jy
! Component: 200  -  total flux cleaned = 0.00150957 Jy
! Total flux subtracted in 200 components = 0.00150957 Jy
! Clean residual min=-0.001404 max=0.001476 Jy/beam
! Clean residual mean=0.000000 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.372826 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 126 components and 0.372826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062538Jy  sigma=1.294764
! Fit after  self-cal, rms=0.062536Jy  sigma=1.294724
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043083 Jy
! Component: 100  -  total flux cleaned = 0.000553343 Jy
! Component: 150  -  total flux cleaned = 0.00061742 Jy
! Component: 200  -  total flux cleaned = 0.000647617 Jy
! Total flux subtracted in 200 components = 0.000647617 Jy
! Clean residual min=-0.001412 max=0.001442 Jy/beam
! Clean residual mean=0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.373474 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 133 components and 0.373474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062526Jy  sigma=1.294558
! Fit after  self-cal, rms=0.062526Jy  sigma=1.294546
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062526Jy  sigma=1.294546
! Fit after  self-cal, rms=0.062513Jy  sigma=1.294467
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=3.545 mas, bpa=2.141 degrees
! Estimated noise=0.350526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000524285 Jy
! Component: 100  -  total flux cleaned = 0.000705361 Jy
! Component: 150  -  total flux cleaned = 0.000795828 Jy
! Component: 200  -  total flux cleaned = 0.000872811 Jy
! Total flux subtracted in 200 components = 0.000872811 Jy
! Clean residual min=-0.001576 max=0.001503 Jy/beam
! Clean residual mean=0.000001 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.374346 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 153 components and 0.374346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062510Jy  sigma=1.294391
! Fit after  self-cal, rms=0.062509Jy  sigma=1.294365
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021399 Jy
! Component: 100  -  total flux cleaned = 0.000286588 Jy
! Component: 150  -  total flux cleaned = 0.000308443 Jy
! Component: 200  -  total flux cleaned = 0.000336766 Jy
! Total flux subtracted in 200 components = 0.000336766 Jy
! Clean residual min=-0.001545 max=0.001482 Jy/beam
! Clean residual mean=0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.374683 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 159 components and 0.374683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062509Jy  sigma=1.294353
! Fit after  self-cal, rms=0.062509Jy  sigma=1.294347
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=2.734 mas, bpa=16.6 degrees
! Estimated noise=0.301808 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.124 x 2.734 at 16.6 degrees (North through East)
! Clean map  min=-0.0013963  max=0.29003 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8717 mas, bmaj=2.599 mas, bpa=19.78 degrees
! Estimated noise=0.51413 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221416 Jy
! Component: 100  -  total flux cleaned = 0.275296 Jy
! Component: 150  -  total flux cleaned = 0.300733 Jy
! Component: 200  -  total flux cleaned = 0.31668 Jy
! Total flux subtracted in 200 components = 0.31668 Jy
! Clean residual min=-0.004871 max=0.008733 Jy/beam
! Clean residual mean=0.000004 rms=0.001515 Jy/beam
! Combined flux in latest and established models = 0.31668 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.31668 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=2.734 mas, bpa=16.6 degrees
! Estimated noise=0.301808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156768 Jy
! Component: 100  -  total flux cleaned = 0.0261637 Jy
! Component: 150  -  total flux cleaned = 0.033505 Jy
! Component: 200  -  total flux cleaned = 0.0387545 Jy
! Total flux subtracted in 200 components = 0.0387545 Jy
! Clean residual min=-0.002401 max=0.003017 Jy/beam
! Clean residual mean=0.000002 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.355434 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 56 components and 0.355434 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=3.545 mas, bpa=2.141 degrees
! Estimated noise=0.350526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00560468 Jy
! Component: 100  -  total flux cleaned = 0.00924034 Jy
! Component: 150  -  total flux cleaned = 0.0118635 Jy
! Component: 200  -  total flux cleaned = 0.013837 Jy
! Total flux subtracted in 200 components = 0.013837 Jy
! Clean residual min=-0.001840 max=0.001834 Jy/beam
! Clean residual mean=0.000002 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.369271 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151896 Jy
! Component: 100  -  total flux cleaned = 0.00266057 Jy
! Component: 150  -  total flux cleaned = 0.00330858 Jy
! Component: 200  -  total flux cleaned = 0.00383985 Jy
! Total flux subtracted in 200 components = 0.00383985 Jy
! Clean residual min=-0.001658 max=0.001532 Jy/beam
! Clean residual mean=0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.373111 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 132 components and 0.373111 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=2.734 mas, bpa=16.6 degrees
! Estimated noise=0.301808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000563541 Jy
! Component: 100  -  total flux cleaned = 0.000967768 Jy
! Component: 150  -  total flux cleaned = 0.00122732 Jy
! Component: 200  -  total flux cleaned = 0.00137693 Jy
! Total flux subtracted in 200 components = 0.00137693 Jy
! Clean residual min=-0.001571 max=0.001618 Jy/beam
! Clean residual mean=0.000000 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.374488 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 153 components and 0.374488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062580Jy  sigma=1.295479
! Fit after  self-cal, rms=0.062573Jy  sigma=1.295404
wmodel /J0532-0307_X_map.mod
! wmodel: Unable to open new model file: /J0532-0307_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0532-0307_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.124 x 2.734 at 16.6 degrees (North through East)
! Clean map  min=-0.001497  max=0.28995 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0532-0307_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.289949 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000376791 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.389851 0.389851 0.779702 1.5594 3.11881 6.23762 12.4752 24.9505 49.901 99.8019
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.289 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  769.524 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0532-0307_X_dfm.log closed on Thu May 19 18:25:24 2016