! Started logfile: /scr/pima/bg219e_uvs/J0532-0307_S_dfm.log on Thu May 19 18:25:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0532-0307_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0532-0307_S_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.866512 visibilities/baseline/integration-bin.
! Found source: J0532-0307
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4492 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0532-0307_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.045986Jy  sigma=20.089521
! Fit after  self-cal, rms=0.769487Jy  sigma=14.748756
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.507 mas, bmaj=9.579 mas, bpa=18.66 degrees
! Estimated noise=0.799567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.185522 Jy
! Component: 100  -  total flux cleaned = 0.226148 Jy
! Total flux subtracted in 100 components = 0.226148 Jy
! Clean residual min=-0.017088 max=0.057028 Jy/beam
! Clean residual mean=0.000033 rms=0.005136 Jy/beam
! Combined flux in latest and established models = 0.226148 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.226148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138485Jy  sigma=1.980946
! Fit after  self-cal, rms=0.138472Jy  sigma=1.980831
! Inverting map 
! Added new window around map position (8, 4.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0454419 Jy
! Component: 100  -  total flux cleaned = 0.0623577 Jy
! Total flux subtracted in 100 components = 0.0623577 Jy
! Clean residual min=-0.010094 max=0.025131 Jy/beam
! Clean residual mean=0.000015 rms=0.002966 Jy/beam
! Combined flux in latest and established models = 0.288506 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.288506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120150Jy  sigma=1.549698
! Fit after  self-cal, rms=0.116736Jy  sigma=1.445752
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178184 Jy
! Component: 100  -  total flux cleaned = 0.0257043 Jy
! Total flux subtracted in 100 components = 0.0257043 Jy
! Clean residual min=-0.006697 max=0.009806 Jy/beam
! Clean residual mean=0.000004 rms=0.001715 Jy/beam
! Combined flux in latest and established models = 0.31421 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 0.31421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112995Jy  sigma=1.362187
! Fit after  self-cal, rms=0.112519Jy  sigma=1.345971
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.304 mas, bmaj=10.26 mas, bpa=15.99 degrees
! Estimated noise=0.617977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00898748 Jy
! Component: 100  -  total flux cleaned = 0.0104827 Jy
! Component: 150  -  total flux cleaned = 0.0121069 Jy
! Component: 200  -  total flux cleaned = 0.0134838 Jy
! Total flux subtracted in 200 components = 0.0134838 Jy
! Clean residual min=-0.004467 max=0.005986 Jy/beam
! Clean residual mean=0.000002 rms=0.001269 Jy/beam
! Combined flux in latest and established models = 0.327694 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 52 components and 0.327694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111438Jy  sigma=1.325675
! Fit after  self-cal, rms=0.111313Jy  sigma=1.321099
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.304 x 10.26 at 15.99 degrees (North through East)
! Clean map  min=-0.0049078  max=0.22038 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.98     NL        1.11     OV        1.00     PT        1.02     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        0.97     
!   LA        1.01     NL        1.08     OV        1.03     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.99     KP        0.98     
!   LA        0.99     NL        1.04     OV        1.00     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.92     
!   LA        0.98     NL        0.97     OV        1.03     PT        0.97     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.111313Jy  sigma=1.321099
! Fit after  self-cal, rms=0.108778Jy  sigma=1.308607
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.294 mas, bmaj=10.25 mas, bpa=15.97 degrees
! Estimated noise=0.626783 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00343955 Jy
! Component: 100  -  total flux cleaned = 0.00470349 Jy
! Component: 150  -  total flux cleaned = 0.0052818 Jy
! Component: 200  -  total flux cleaned = 0.00564376 Jy
! Total flux subtracted in 200 components = 0.00564376 Jy
! Clean residual min=-0.003722 max=0.004354 Jy/beam
! Clean residual mean=-0.000002 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 0.333338 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 0.333338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108531Jy  sigma=1.306009
! Fit after  self-cal, rms=0.108514Jy  sigma=1.305371
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108514Jy  sigma=1.305371
! Fit after  self-cal, rms=0.108668Jy  sigma=1.297229
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.289 mas, bmaj=10.25 mas, bpa=16.03 degrees
! Estimated noise=0.632455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274125 Jy
! Component: 100  -  total flux cleaned = 0.00426719 Jy
! Component: 150  -  total flux cleaned = 0.0051737 Jy
! Component: 200  -  total flux cleaned = 0.00557672 Jy
! Total flux subtracted in 200 components = 0.00557672 Jy
! Clean residual min=-0.003251 max=0.003809 Jy/beam
! Clean residual mean=-0.000004 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.338915 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.338915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108450Jy  sigma=1.296028
! Fit after  self-cal, rms=0.108445Jy  sigma=1.295738
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00079814 Jy
! Component: 100  -  total flux cleaned = 0.000967765 Jy
! Component: 150  -  total flux cleaned = 0.00105299 Jy
! Component: 200  -  total flux cleaned = 0.00110417 Jy
! Total flux subtracted in 200 components = 0.00110417 Jy
! Clean residual min=-0.003277 max=0.003668 Jy/beam
! Clean residual mean=-0.000005 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.340019 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.340019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108394Jy  sigma=1.295380
! Fit after  self-cal, rms=0.108394Jy  sigma=1.295314
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108394Jy  sigma=1.295314
! Fit after  self-cal, rms=0.108605Jy  sigma=1.294165
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.284 mas, bmaj=10.24 mas, bpa=16.08 degrees
! Estimated noise=0.63667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209673 Jy
! Component: 100  -  total flux cleaned = 0.00333867 Jy
! Component: 150  -  total flux cleaned = 0.00415706 Jy
! Component: 200  -  total flux cleaned = 0.00454537 Jy
! Total flux subtracted in 200 components = 0.00454537 Jy
! Clean residual min=-0.003121 max=0.003641 Jy/beam
! Clean residual mean=-0.000004 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.344564 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 107 components and 0.344564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108447Jy  sigma=1.293638
! Fit after  self-cal, rms=0.108445Jy  sigma=1.293534
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00074534 Jy
! Component: 100  -  total flux cleaned = 0.000819664 Jy
! Component: 150  -  total flux cleaned = 0.000841382 Jy
! Component: 200  -  total flux cleaned = 0.000919456 Jy
! Total flux subtracted in 200 components = 0.000919456 Jy
! Clean residual min=-0.003192 max=0.003552 Jy/beam
! Clean residual mean=-0.000004 rms=0.000848 Jy/beam
! Combined flux in latest and established models = 0.345484 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 114 components and 0.345484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108408Jy  sigma=1.293407
! Fit after  self-cal, rms=0.108410Jy  sigma=1.293375
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108410Jy  sigma=1.293375
! Fit after  self-cal, rms=0.108610Jy  sigma=1.292529
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.792 mas, bmaj=12.89 mas, bpa=3.927 degrees
! Estimated noise=0.734983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237527 Jy
! Component: 100  -  total flux cleaned = 0.00359604 Jy
! Component: 150  -  total flux cleaned = 0.00387495 Jy
! Component: 200  -  total flux cleaned = 0.00412729 Jy
! Total flux subtracted in 200 components = 0.00412729 Jy
! Clean residual min=-0.004235 max=0.003518 Jy/beam
! Clean residual mean=-0.000006 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.349611 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 159 components and 0.349611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108471Jy  sigma=1.292374
! Fit after  self-cal, rms=0.108466Jy  sigma=1.292293
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000310119 Jy
! Component: 100  -  total flux cleaned = 0.000450382 Jy
! Component: 150  -  total flux cleaned = 0.000502802 Jy
! Component: 200  -  total flux cleaned = 0.000533111 Jy
! Total flux subtracted in 200 components = 0.000533111 Jy
! Clean residual min=-0.004115 max=0.003539 Jy/beam
! Clean residual mean=-0.000006 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.350144 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 171 components and 0.350144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108437Jy  sigma=1.292420
! Fit after  self-cal, rms=0.108437Jy  sigma=1.292387
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.277 mas, bmaj=10.22 mas, bpa=16.13 degrees
! Estimated noise=0.640469 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.277 x 10.22 at 16.13 degrees (North through East)
! Clean map  min=-0.0031383  max=0.22436 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.491 mas, bmaj=9.559 mas, bpa=18.76 degrees
! Estimated noise=0.82363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194343 Jy
! Component: 100  -  total flux cleaned = 0.261809 Jy
! Component: 150  -  total flux cleaned = 0.289868 Jy
! Component: 200  -  total flux cleaned = 0.306187 Jy
! Total flux subtracted in 200 components = 0.306187 Jy
! Clean residual min=-0.005764 max=0.008537 Jy/beam
! Clean residual mean=0.000006 rms=0.001546 Jy/beam
! Combined flux in latest and established models = 0.306187 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.306187 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.277 mas, bmaj=10.22 mas, bpa=16.13 degrees
! Estimated noise=0.640469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145238 Jy
! Component: 100  -  total flux cleaned = 0.0231832 Jy
! Component: 150  -  total flux cleaned = 0.0289764 Jy
! Component: 200  -  total flux cleaned = 0.0330528 Jy
! Total flux subtracted in 200 components = 0.0330528 Jy
! Clean residual min=-0.003719 max=0.004162 Jy/beam
! Clean residual mean=-0.000000 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.339239 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 82 components and 0.339239 Jy
! Inverting map 
! Added new window around map position (101, 76.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384704 Jy
! Component: 100  -  total flux cleaned = 0.00643895 Jy
! Component: 150  -  total flux cleaned = 0.0079316 Jy
! Component: 200  -  total flux cleaned = 0.00890827 Jy
! Total flux subtracted in 200 components = 0.00890827 Jy
! Clean residual min=-0.003198 max=0.003296 Jy/beam
! Clean residual mean=-0.000002 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.348148 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 113 components and 0.348148 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.792 mas, bmaj=12.89 mas, bpa=3.927 degrees
! Estimated noise=0.734983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169648 Jy
! Component: 100  -  total flux cleaned = 0.00240027 Jy
! Component: 150  -  total flux cleaned = 0.00263784 Jy
! Component: 200  -  total flux cleaned = 0.00291497 Jy
! Total flux subtracted in 200 components = 0.00291497 Jy
! Clean residual min=-0.004052 max=0.003484 Jy/beam
! Clean residual mean=-0.000008 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.351063 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122284 Jy
! Component: 100  -  total flux cleaned = 0.000206808 Jy
! Component: 150  -  total flux cleaned = 0.000260094 Jy
! Component: 200  -  total flux cleaned = 0.00030866 Jy
! Total flux subtracted in 200 components = 0.00030866 Jy
! Clean residual min=-0.003972 max=0.003488 Jy/beam
! Clean residual mean=-0.000008 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.351371 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 165 components and 0.351371 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.277 mas, bmaj=10.22 mas, bpa=16.13 degrees
! Estimated noise=0.640469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.37557e-05 Jy
! Component: 100  -  total flux cleaned = 0.000322451 Jy
! Component: 150  -  total flux cleaned = 0.000320201 Jy
! Component: 200  -  total flux cleaned = 0.000320694 Jy
! Total flux subtracted in 200 components = 0.000320694 Jy
! Clean residual min=-0.003027 max=0.002970 Jy/beam
! Clean residual mean=-0.000004 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.351692 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 186 components and 0.351692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108286Jy  sigma=1.289785
! Fit after  self-cal, rms=0.108284Jy  sigma=1.289344
wmodel /J0532-0307_S_map.mod
! wmodel: Unable to open new model file: /J0532-0307_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0532-0307_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.277 x 10.22 at 16.13 degrees (North through East)
! Clean map  min=-0.0029532  max=0.22401 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0532-0307_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.224005 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000779693 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04421 1.04421 2.08842 4.17683 8.35366 16.7073 33.4147 66.8293
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.224 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  287.299 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0532-0307_S_dfm.log closed on Thu May 19 18:25:20 2016