! Started logfile: /scr/pima/bg219e_uvs/J0522+0113_X_dfm.log on Thu May 19 18:25:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0522+0113_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0522+0113_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.872024 visibilities/baseline/integration-bin.
! Found source: J0522+0113
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10548 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0522+0113_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.093430Jy  sigma=22.715230
! Fit after  self-cal, rms=0.550372Jy  sigma=11.354895
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9289 mas, bmaj=2.46 mas, bpa=21.43 degrees
! Estimated noise=0.588258 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.345131 Jy
! Component: 100  -  total flux cleaned = 0.42378 Jy
! Total flux subtracted in 100 components = 0.42378 Jy
! Clean residual min=-0.011155 max=0.029331 Jy/beam
! Clean residual mean=0.000003 rms=0.003386 Jy/beam
! Combined flux in latest and established models = 0.42378 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.42378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091449Jy  sigma=1.857229
! Fit after  self-cal, rms=0.091446Jy  sigma=1.857165
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.031995 Jy
! Component: 100  -  total flux cleaned = 0.0500904 Jy
! Total flux subtracted in 100 components = 0.0500904 Jy
! Clean residual min=-0.007128 max=0.013817 Jy/beam
! Clean residual mean=-0.000002 rms=0.002016 Jy/beam
! Combined flux in latest and established models = 0.473871 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 23 components and 0.473871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075559Jy  sigma=1.492864
! Fit after  self-cal, rms=0.075556Jy  sigma=1.492626
! Inverting map 
! Added new window around map position (-12.6, -21).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014125 Jy
! Component: 100  -  total flux cleaned = 0.0241658 Jy
! Total flux subtracted in 100 components = 0.0241658 Jy
! Clean residual min=-0.006361 max=0.007693 Jy/beam
! Clean residual mean=-0.000003 rms=0.001596 Jy/beam
! Combined flux in latest and established models = 0.498037 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 39 components and 0.498037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071561Jy  sigma=1.402789
! Fit after  self-cal, rms=0.071514Jy  sigma=1.401634
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.186 mas, bmaj=2.637 mas, bpa=19.38 degrees
! Estimated noise=0.368597 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124524 Jy
! Component: 100  -  total flux cleaned = 0.0214855 Jy
! Component: 150  -  total flux cleaned = 0.0284631 Jy
! Component: 200  -  total flux cleaned = 0.0340751 Jy
! Total flux subtracted in 200 components = 0.0340751 Jy
! Clean residual min=-0.004203 max=0.006489 Jy/beam
! Clean residual mean=-0.000003 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.532112 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 84 components and 0.532112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068554Jy  sigma=1.334403
! Fit after  self-cal, rms=0.068512Jy  sigma=1.333196
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.186 x 2.637 at 19.38 degrees (North through East)
! Clean map  min=-0.0041626  max=0.45528 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.97     
!   LA        1.00     NL        0.99     OV        0.98     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.00     
!   LA        1.00     NL        1.02     OV        0.96     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.98     NL        0.99     OV        0.97     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.98     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.97     
!   LA        1.00     NL        1.00     OV        0.98     PT        1.01     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.01     OV        0.98     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        0.98     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.04     KP        1.00     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.01     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.068512Jy  sigma=1.333196
! Fit after  self-cal, rms=0.067863Jy  sigma=1.316141
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.192 mas, bmaj=2.649 mas, bpa=19.33 degrees
! Estimated noise=0.366663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443406 Jy
! Component: 100  -  total flux cleaned = 0.00721244 Jy
! Component: 150  -  total flux cleaned = 0.00912253 Jy
! Component: 200  -  total flux cleaned = 0.0102803 Jy
! Total flux subtracted in 200 components = 0.0102803 Jy
! Clean residual min=-0.003478 max=0.004910 Jy/beam
! Clean residual mean=-0.000003 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.542392 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.542392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067534Jy  sigma=1.308610
! Fit after  self-cal, rms=0.067535Jy  sigma=1.308224
! Inverting map 
! Added new window around map position (-2.2, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310471 Jy
! Component: 100  -  total flux cleaned = 0.00301308 Jy
! Component: 150  -  total flux cleaned = 0.00300707 Jy
! Component: 200  -  total flux cleaned = 0.00314337 Jy
! Total flux subtracted in 200 components = 0.00314337 Jy
! Clean residual min=-0.003425 max=0.003281 Jy/beam
! Clean residual mean=-0.000002 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.545535 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 119 components and 0.545535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067194Jy  sigma=1.301242
! Fit after  self-cal, rms=0.067179Jy  sigma=1.300777
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067179Jy  sigma=1.300777
! Fit after  self-cal, rms=0.066859Jy  sigma=1.285723
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.191 mas, bmaj=2.649 mas, bpa=19.29 degrees
! Estimated noise=0.36718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202105 Jy
! Component: 100  -  total flux cleaned = 0.00269241 Jy
! Component: 150  -  total flux cleaned = 0.00278547 Jy
! Component: 200  -  total flux cleaned = 0.00286305 Jy
! Total flux subtracted in 200 components = 0.00286305 Jy
! Clean residual min=-0.002170 max=0.002764 Jy/beam
! Clean residual mean=-0.000003 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.548398 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 144 components and 0.548398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066780Jy  sigma=1.283918
! Fit after  self-cal, rms=0.066790Jy  sigma=1.283814
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.2, -21.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164786 Jy
! Component: 100  -  total flux cleaned = 0.00203541 Jy
! Component: 150  -  total flux cleaned = 0.00256934 Jy
! Component: 200  -  total flux cleaned = 0.00307567 Jy
! Total flux subtracted in 200 components = 0.00307567 Jy
! Clean residual min=-0.002106 max=0.002159 Jy/beam
! Clean residual mean=-0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.551474 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 165 components and 0.551474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066685Jy  sigma=1.281879
! Fit after  self-cal, rms=0.066681Jy  sigma=1.281826
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066681Jy  sigma=1.281826
! Fit after  self-cal, rms=0.066684Jy  sigma=1.281535
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.191 mas, bmaj=2.65 mas, bpa=19.31 degrees
! Estimated noise=0.36713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111605 Jy
! Component: 100  -  total flux cleaned = 0.00154974 Jy
! Component: 150  -  total flux cleaned = 0.0019025 Jy
! Component: 200  -  total flux cleaned = 0.00210729 Jy
! Total flux subtracted in 200 components = 0.00210729 Jy
! Clean residual min=-0.002015 max=0.002126 Jy/beam
! Clean residual mean=-0.000002 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.553581 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 179 components and 0.553581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066648Jy  sigma=1.280848
! Fit after  self-cal, rms=0.066648Jy  sigma=1.280829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-26.8, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220701 Jy
! Component: 100  -  total flux cleaned = 0.00334144 Jy
! Component: 150  -  total flux cleaned = 0.00383452 Jy
! Component: 200  -  total flux cleaned = 0.00436736 Jy
! Total flux subtracted in 200 components = 0.00436736 Jy
! Clean residual min=-0.001821 max=0.001585 Jy/beam
! Clean residual mean=-0.000002 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.557949 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 193 components and 0.557949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066562Jy  sigma=1.279073
! Fit after  self-cal, rms=0.066559Jy  sigma=1.279019
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066559Jy  sigma=1.279019
! Fit after  self-cal, rms=0.066542Jy  sigma=1.278908
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.282 mas, bmaj=3.295 mas, bpa=4.532 degrees
! Estimated noise=0.423241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000597405 Jy
! Component: 100  -  total flux cleaned = 0.00110276 Jy
! Component: 150  -  total flux cleaned = 0.00155418 Jy
! Component: 200  -  total flux cleaned = 0.00187197 Jy
! Total flux subtracted in 200 components = 0.00187197 Jy
! Clean residual min=-0.001758 max=0.001839 Jy/beam
! Clean residual mean=-0.000002 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.559821 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 213 components and 0.559821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066530Jy  sigma=1.278687
! Fit after  self-cal, rms=0.066530Jy  sigma=1.278679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023942 Jy
! Component: 100  -  total flux cleaned = 0.000460162 Jy
! Component: 150  -  total flux cleaned = 0.000666917 Jy
! Component: 200  -  total flux cleaned = 0.000860793 Jy
! Total flux subtracted in 200 components = 0.000860793 Jy
! Clean residual min=-0.001712 max=0.001747 Jy/beam
! Clean residual mean=-0.000002 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.560681 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 225 components and 0.560682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066525Jy  sigma=1.278560
! Fit after  self-cal, rms=0.066524Jy  sigma=1.278553
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.191 mas, bmaj=2.65 mas, bpa=19.31 degrees
! Estimated noise=0.367017 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.191 x 2.65 at 19.31 degrees (North through East)
! Clean map  min=-0.0016335  max=0.45299 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9306 mas, bmaj=2.469 mas, bpa=21.36 degrees
! Estimated noise=0.588766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.345364 Jy
! Component: 100  -  total flux cleaned = 0.423903 Jy
! Component: 150  -  total flux cleaned = 0.455489 Jy
! Component: 200  -  total flux cleaned = 0.473453 Jy
! Total flux subtracted in 200 components = 0.473453 Jy
! Clean residual min=-0.006341 max=0.009685 Jy/beam
! Clean residual mean=-0.000002 rms=0.001735 Jy/beam
! Combined flux in latest and established models = 0.473453 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.473453 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.191 mas, bmaj=2.65 mas, bpa=19.31 degrees
! Estimated noise=0.367017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178328 Jy
! Component: 100  -  total flux cleaned = 0.0302377 Jy
! Component: 150  -  total flux cleaned = 0.0393399 Jy
! Component: 200  -  total flux cleaned = 0.0463058 Jy
! Total flux subtracted in 200 components = 0.0463058 Jy
! Clean residual min=-0.003565 max=0.004096 Jy/beam
! Clean residual mean=-0.000003 rms=0.001059 Jy/beam
! Combined flux in latest and established models = 0.519758 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 65 components and 0.519759 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.282 mas, bmaj=3.295 mas, bpa=4.532 degrees
! Estimated noise=0.423241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00805213 Jy
! Component: 100  -  total flux cleaned = 0.0138199 Jy
! Component: 150  -  total flux cleaned = 0.0179223 Jy
! Component: 200  -  total flux cleaned = 0.0205962 Jy
! Total flux subtracted in 200 components = 0.0205962 Jy
! Clean residual min=-0.003039 max=0.003101 Jy/beam
! Clean residual mean=-0.000004 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.540355 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247334 Jy
! Component: 100  -  total flux cleaned = 0.00459592 Jy
! Component: 150  -  total flux cleaned = 0.00644468 Jy
! Component: 200  -  total flux cleaned = 0.00815671 Jy
! Total flux subtracted in 200 components = 0.00815671 Jy
! Clean residual min=-0.002301 max=0.002216 Jy/beam
! Clean residual mean=-0.000003 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.548512 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 164 components and 0.548512 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.191 mas, bmaj=2.65 mas, bpa=19.31 degrees
! Estimated noise=0.367017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231954 Jy
! Component: 100  -  total flux cleaned = 0.00364244 Jy
! Component: 150  -  total flux cleaned = 0.00476199 Jy
! Component: 200  -  total flux cleaned = 0.00566803 Jy
! Total flux subtracted in 200 components = 0.00566803 Jy
! Clean residual min=-0.001983 max=0.002062 Jy/beam
! Clean residual mean=-0.000002 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.55418 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 189 components and 0.55418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066718Jy  sigma=1.281885
! Fit after  self-cal, rms=0.066698Jy  sigma=1.281669
wmodel /J0522+0113_X_map.mod
! wmodel: Unable to open new model file: /J0522+0113_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0522+0113_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.191 x 2.65 at 19.31 degrees (North through East)
! Clean map  min=-0.0020329  max=0.45424 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0522+0113_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.454237 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000495784 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.327439 0.327439 0.654879 1.30976 2.61952 5.23903 10.4781 20.9561 41.9122 83.8245
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.454 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  916.2 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0522+0113_X_dfm.log closed on Thu May 19 18:25:08 2016