! Started logfile: /scr/pima/bg219e_uvs/J0520-0240_S_dfm.log on Thu May 19 18:24:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0520-0240_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0520-0240_S_uva.fits
! AN table 1: 60 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.554762 visibilities/baseline/integration-bin.
! Found source: J0520-0240
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3728 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0520-0240_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003141Jy  sigma=21.381208
! Fit after  self-cal, rms=0.931130Jy  sigma=19.987335
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.994 mas, bmaj=12.93 mas, bpa=-5.081 degrees
! Estimated noise=0.866107 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0497434 Jy
! Component: 100  -  total flux cleaned = 0.0665383 Jy
! Total flux subtracted in 100 components = 0.0665383 Jy
! Clean residual min=-0.007906 max=0.009896 Jy/beam
! Clean residual mean=0.000020 rms=0.002923 Jy/beam
! Combined flux in latest and established models = 0.0665383 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0665383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076828Jy  sigma=1.510384
! Fit after  self-cal, rms=0.075316Jy  sigma=1.486287
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.848 mas, bmaj=14.48 mas, bpa=-4.483 degrees
! Estimated noise=0.60244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184452 Jy
! Component: 100  -  total flux cleaned = 0.0303912 Jy
! Component: 150  -  total flux cleaned = 0.0388252 Jy
! Component: 200  -  total flux cleaned = 0.0449085 Jy
! Total flux subtracted in 200 components = 0.0449085 Jy
! Clean residual min=-0.007009 max=0.008943 Jy/beam
! Clean residual mean=0.000009 rms=0.002813 Jy/beam
! Combined flux in latest and established models = 0.111447 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 97 components and 0.111447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070518Jy  sigma=1.342967
! Fit after  self-cal, rms=0.069930Jy  sigma=1.334896
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.848 x 14.48 at -4.483 degrees (North through East)
! Clean map  min=-0.0070644  max=0.066689 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.069930Jy  sigma=1.334896
! Fit after  self-cal, rms=0.069930Jy  sigma=1.334896
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.848 mas, bmaj=14.48 mas, bpa=-4.483 degrees
! Estimated noise=0.60244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557958 Jy
! Component: 100  -  total flux cleaned = 0.00939812 Jy
! Component: 150  -  total flux cleaned = 0.0121683 Jy
! Component: 200  -  total flux cleaned = 0.0136878 Jy
! Total flux subtracted in 200 components = 0.0136878 Jy
! Clean residual min=-0.006519 max=0.008053 Jy/beam
! Clean residual mean=0.000002 rms=0.002469 Jy/beam
! Combined flux in latest and established models = 0.125135 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 105 components and 0.125135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069547Jy  sigma=1.318249
! Fit after  self-cal, rms=0.069515Jy  sigma=1.317343
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069515Jy  sigma=1.317343
! Fit after  self-cal, rms=0.069515Jy  sigma=1.317343
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.848 mas, bmaj=14.48 mas, bpa=-4.483 degrees
! Estimated noise=0.60244 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118608 Jy
! Component: 100  -  total flux cleaned = 0.00180733 Jy
! Component: 150  -  total flux cleaned = 0.00228958 Jy
! Component: 200  -  total flux cleaned = 0.00266914 Jy
! Total flux subtracted in 200 components = 0.00266914 Jy
! Clean residual min=-0.006457 max=0.007664 Jy/beam
! Clean residual mean=0.000001 rms=0.002391 Jy/beam
! Combined flux in latest and established models = 0.127804 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 121 components and 0.127804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069395Jy  sigma=1.313597
! Fit after  self-cal, rms=0.069381Jy  sigma=1.313105
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000661582 Jy
! Component: 100  -  total flux cleaned = 0.00111887 Jy
! Component: 150  -  total flux cleaned = 0.00146416 Jy
! Component: 200  -  total flux cleaned = 0.00178481 Jy
! Total flux subtracted in 200 components = 0.00178481 Jy
! Clean residual min=-0.006582 max=0.007454 Jy/beam
! Clean residual mean=0.000001 rms=0.002334 Jy/beam
! Combined flux in latest and established models = 0.129588 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 135 components and 0.129589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069287Jy  sigma=1.310548
! Fit after  self-cal, rms=0.069286Jy  sigma=1.310223
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069286Jy  sigma=1.310223
! Fit after  self-cal, rms=0.069286Jy  sigma=1.310223
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.848 mas, bmaj=14.48 mas, bpa=-4.483 degrees
! Estimated noise=0.60244 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000428935 Jy
! Component: 100  -  total flux cleaned = 0.00071611 Jy
! Component: 150  -  total flux cleaned = 0.000966215 Jy
! Component: 200  -  total flux cleaned = 0.00115415 Jy
! Total flux subtracted in 200 components = 0.00115415 Jy
! Clean residual min=-0.006664 max=0.007364 Jy/beam
! Clean residual mean=0.000001 rms=0.002294 Jy/beam
! Combined flux in latest and established models = 0.130743 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 150 components and 0.130743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069214Jy  sigma=1.308356
! Fit after  self-cal, rms=0.069217Jy  sigma=1.308083
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00044712 Jy
! Component: 100  -  total flux cleaned = 0.000593724 Jy
! Component: 150  -  total flux cleaned = 0.000771623 Jy
! Component: 200  -  total flux cleaned = 0.000977814 Jy
! Total flux subtracted in 200 components = 0.000977814 Jy
! Clean residual min=-0.006732 max=0.007291 Jy/beam
! Clean residual mean=0.000000 rms=0.002263 Jy/beam
! Combined flux in latest and established models = 0.13172 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 164 components and 0.13172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069160Jy  sigma=1.306593
! Fit after  self-cal, rms=0.069163Jy  sigma=1.306351
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069163Jy  sigma=1.306351
! Fit after  self-cal, rms=0.069163Jy  sigma=1.306351
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.57 mas, bmaj=15.96 mas, bpa=8.782 degrees
! Estimated noise=0.624698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148282 Jy
! Component: 100  -  total flux cleaned = 0.00188744 Jy
! Component: 150  -  total flux cleaned = 0.00214506 Jy
! Component: 200  -  total flux cleaned = 0.00238666 Jy
! Total flux subtracted in 200 components = 0.00238666 Jy
! Clean residual min=-0.007509 max=0.008470 Jy/beam
! Clean residual mean=-0.000001 rms=0.002616 Jy/beam
! Combined flux in latest and established models = 0.134107 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 167 components and 0.134107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069173Jy  sigma=1.304583
! Fit after  self-cal, rms=0.069164Jy  sigma=1.304346
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324705 Jy
! Component: 100  -  total flux cleaned = 0.000589919 Jy
! Component: 150  -  total flux cleaned = 0.000834337 Jy
! Component: 200  -  total flux cleaned = 0.00102406 Jy
! Total flux subtracted in 200 components = 0.00102406 Jy
! Clean residual min=-0.007483 max=0.008344 Jy/beam
! Clean residual mean=-0.000002 rms=0.002578 Jy/beam
! Combined flux in latest and established models = 0.135131 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 174 components and 0.135131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069162Jy  sigma=1.303433
! Fit after  self-cal, rms=0.069159Jy  sigma=1.303257
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.848 mas, bmaj=14.48 mas, bpa=-4.483 degrees
! Estimated noise=0.60244 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.848 x 14.48 at -4.483 degrees (North through East)
! Clean map  min=-0.0067326  max=0.0603 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.994 mas, bmaj=12.93 mas, bpa=-5.081 degrees
! Estimated noise=0.866107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0496846 Jy
! Component: 100  -  total flux cleaned = 0.0691773 Jy
! Component: 150  -  total flux cleaned = 0.082258 Jy
! Component: 200  -  total flux cleaned = 0.0918656 Jy
! Total flux subtracted in 200 components = 0.0918656 Jy
! Clean residual min=-0.006854 max=0.007733 Jy/beam
! Clean residual mean=0.000013 rms=0.002366 Jy/beam
! Combined flux in latest and established models = 0.0918656 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 71 model components to the UV plane model.
! The established model now contains 71 components and 0.0918656 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.848 mas, bmaj=14.48 mas, bpa=-4.483 degrees
! Estimated noise=0.60244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124862 Jy
! Component: 100  -  total flux cleaned = 0.0206395 Jy
! Component: 150  -  total flux cleaned = 0.0264144 Jy
! Component: 200  -  total flux cleaned = 0.0305895 Jy
! Total flux subtracted in 200 components = 0.0305895 Jy
! Clean residual min=-0.006866 max=0.008164 Jy/beam
! Clean residual mean=0.000006 rms=0.002474 Jy/beam
! Combined flux in latest and established models = 0.122455 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 106 components and 0.122455 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.57 mas, bmaj=15.96 mas, bpa=8.782 degrees
! Estimated noise=0.624698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443074 Jy
! Component: 100  -  total flux cleaned = 0.00728199 Jy
! Component: 150  -  total flux cleaned = 0.00885536 Jy
! Component: 200  -  total flux cleaned = 0.00947622 Jy
! Total flux subtracted in 200 components = 0.00947622 Jy
! Clean residual min=-0.007269 max=0.008544 Jy/beam
! Clean residual mean=0.000000 rms=0.002679 Jy/beam
! Combined flux in latest and established models = 0.131931 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227271 Jy
! Component: 100  -  total flux cleaned = 0.000502214 Jy
! Component: 150  -  total flux cleaned = 0.000820139 Jy
! Component: 200  -  total flux cleaned = 0.0010241 Jy
! Total flux subtracted in 200 components = 0.0010241 Jy
! Clean residual min=-0.007308 max=0.008512 Jy/beam
! Clean residual mean=0.000000 rms=0.002643 Jy/beam
! Combined flux in latest and established models = 0.132955 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 126 components and 0.132955 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.848 mas, bmaj=14.48 mas, bpa=-4.483 degrees
! Estimated noise=0.60244 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102817 Jy
! Component: 100  -  total flux cleaned = -0.000163688 Jy
! Component: 150  -  total flux cleaned = -0.000106835 Jy
! Component: 200  -  total flux cleaned = -1.2867e-05 Jy
! Total flux subtracted in 200 components = -1.2867e-05 Jy
! Clean residual min=-0.006627 max=0.007798 Jy/beam
! Clean residual mean=0.000001 rms=0.002224 Jy/beam
! Combined flux in latest and established models = 0.132943 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 135 components and 0.132943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069207Jy  sigma=1.305069
! Fit after  self-cal, rms=0.069230Jy  sigma=1.304163
wmodel /J0520-0240_S_map.mod
! wmodel: Unable to open new model file: /J0520-0240_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0520-0240_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.848 x 14.48 at -4.483 degrees (North through East)
! Clean map  min=-0.0065449  max=0.059956 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0520-0240_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0599562 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00222012 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -11.1087 11.1087 22.2174 44.4348 88.8696
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0066 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.059 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  27.005 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0520-0240_S_dfm.log closed on Thu May 19 18:24:56 2016