! Started logfile: /scr/pima/bg219e_uvs/J0513+0100_S_uvs.log on Thu Apr 7 06:36:19 2016 obs /scr/pima/bg219e_uvs/J0513+0100_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0513+0100_S_uva.fits ! AN table 1: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.864087 visibilities/baseline/integration-bin. ! Found source: J0513+0100 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 3484 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0513+0100_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.039872Jy sigma=21.171042 ! Fit after self-cal, rms=0.757940Jy sigma=15.304978 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=9.961 mas, bpa=18.15 degrees ! Estimated noise=0.906844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183549 Jy ! Component: 100 - total flux cleaned = 0.259419 Jy ! Total flux subtracted in 100 components = 0.259419 Jy ! Clean residual min=-0.016123 max=0.036266 Jy/beam ! Clean residual mean=0.000063 rms=0.005074 Jy/beam ! Combined flux in latest and established models = 0.259419 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.259419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106315Jy sigma=2.116512 ! Fit after self-cal, rms=0.105981Jy sigma=2.110506 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433763 Jy ! Component: 100 - total flux cleaned = 0.0704598 Jy ! Total flux subtracted in 100 components = 0.0704598 Jy ! Clean residual min=-0.010956 max=0.014270 Jy/beam ! Clean residual mean=0.000030 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 0.329879 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.329879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081578Jy sigma=1.579453 ! Fit after self-cal, rms=0.081470Jy sigma=1.577107 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.491 mas, bmaj=10.64 mas, bpa=17.57 degrees ! Estimated noise=0.660784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227284 Jy ! Component: 100 - total flux cleaned = 0.036148 Jy ! Component: 150 - total flux cleaned = 0.0445775 Jy ! Component: 200 - total flux cleaned = 0.0482793 Jy ! Total flux subtracted in 200 components = 0.0482793 Jy ! Clean residual min=-0.008769 max=0.009690 Jy/beam ! Clean residual mean=0.000002 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.378158 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 62 components and 0.378158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074676Jy sigma=1.425103 ! Fit after self-cal, rms=0.074637Jy sigma=1.424109 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.491 x 10.64 at 17.57 degrees (North through East) ! Clean map min=-0.0083813 max=0.22177 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.02 KP 0.99 ! LA 0.99 NL 0.98 OV 0.99 PT 0.99 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.04 KP 0.99 ! LA 1.00 NL 0.98 OV 0.97 PT 0.97 ! SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 1.04 KP 1.00 ! LA 1.02 NL 1.00 OV 0.97 PT 0.99 ! SC 1.11 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.10 HN 1.01 KP 1.02 ! LA 0.98 NL 0.97 OV 0.97 PT 0.99 ! SC 1.15 ! ! ! Fit before self-cal, rms=0.074637Jy sigma=1.424109 ! Fit after self-cal, rms=0.075959Jy sigma=1.398875 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.58 mas, bmaj=10.71 mas, bpa=17.19 degrees ! Estimated noise=0.66563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376419 Jy ! Component: 100 - total flux cleaned = 0.00375052 Jy ! Component: 150 - total flux cleaned = 0.00395717 Jy ! Component: 200 - total flux cleaned = 0.00394611 Jy ! Total flux subtracted in 200 components = 0.00394611 Jy ! Clean residual min=-0.007357 max=0.006782 Jy/beam ! Clean residual mean=0.000010 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 0.382104 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.382104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073932Jy sigma=1.371335 ! Fit after self-cal, rms=0.073935Jy sigma=1.369850 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073935Jy sigma=1.369850 ! Fit after self-cal, rms=0.072732Jy sigma=1.356359 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.555 mas, bmaj=10.67 mas, bpa=17.21 degrees ! Estimated noise=0.660297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368658 Jy ! Component: 100 - total flux cleaned = 0.00054172 Jy ! Component: 150 - total flux cleaned = 0.000872131 Jy ! Component: 200 - total flux cleaned = 0.00102005 Jy ! Total flux subtracted in 200 components = 0.00102005 Jy ! Clean residual min=-0.006697 max=0.005466 Jy/beam ! Clean residual mean=-0.000002 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.383124 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.383124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071762Jy sigma=1.345369 ! Fit after self-cal, rms=0.071771Jy sigma=1.344927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012858 Jy ! Component: 100 - total flux cleaned = -0.000134954 Jy ! Component: 150 - total flux cleaned = -0.000139214 Jy ! Component: 200 - total flux cleaned = -0.000139366 Jy ! Total flux subtracted in 200 components = -0.000139366 Jy ! Clean residual min=-0.006191 max=0.005417 Jy/beam ! Clean residual mean=-0.000002 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.382985 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.382985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071124Jy sigma=1.337832 ! Fit after self-cal, rms=0.071124Jy sigma=1.337543 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071124Jy sigma=1.337543 ! Fit after self-cal, rms=0.070783Jy sigma=1.334974 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.539 mas, bmaj=10.64 mas, bpa=17.17 degrees ! Estimated noise=0.657929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210712 Jy ! Component: 100 - total flux cleaned = 0.00020917 Jy ! Component: 150 - total flux cleaned = 0.000208689 Jy ! Component: 200 - total flux cleaned = 0.00032081 Jy ! Total flux subtracted in 200 components = 0.00032081 Jy ! Clean residual min=-0.005758 max=0.005049 Jy/beam ! Clean residual mean=-0.000001 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.383306 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.383306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070260Jy sigma=1.329201 ! Fit after self-cal, rms=0.070255Jy sigma=1.328924 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.32882e-05 Jy ! Component: 100 - total flux cleaned = -0.000177824 Jy ! Component: 150 - total flux cleaned = 2.15692e-05 Jy ! Component: 200 - total flux cleaned = 1.94434e-05 Jy ! Total flux subtracted in 200 components = 1.94434e-05 Jy ! Clean residual min=-0.005658 max=0.005029 Jy/beam ! Clean residual mean=-0.000001 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.383325 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.383325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069895Jy sigma=1.324782 ! Fit after self-cal, rms=0.069891Jy sigma=1.324592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069891Jy sigma=1.324592 ! Fit after self-cal, rms=0.069465Jy sigma=1.324158 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.367 mas, bmaj=12.88 mas, bpa=4.359 degrees ! Estimated noise=0.741317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169221 Jy ! Component: 100 - total flux cleaned = -0.00201671 Jy ! Component: 150 - total flux cleaned = -0.00219953 Jy ! Component: 200 - total flux cleaned = -0.00237019 Jy ! Total flux subtracted in 200 components = -0.00237019 Jy ! Clean residual min=-0.004098 max=0.003855 Jy/beam ! Clean residual mean=-0.000001 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.380955 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 130 components and 0.380955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069328Jy sigma=1.321872 ! Fit after self-cal, rms=0.069322Jy sigma=1.321780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180435 Jy ! Component: 100 - total flux cleaned = -0.000341817 Jy ! Component: 150 - total flux cleaned = -0.000445113 Jy ! Component: 200 - total flux cleaned = -0.000542208 Jy ! Total flux subtracted in 200 components = -0.000542208 Jy ! Clean residual min=-0.004057 max=0.003783 Jy/beam ! Clean residual mean=-0.000001 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.380413 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 134 components and 0.380413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069219Jy sigma=1.320340 ! Fit after self-cal, rms=0.069216Jy sigma=1.320288 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.528 mas, bmaj=10.61 mas, bpa=17.13 degrees ! Estimated noise=0.656145 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.528 x 10.61 at 17.13 degrees (North through East) ! Clean map min=-0.01103 max=0.22027 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=9.91 mas, bpa=17.64 degrees ! Estimated noise=0.89877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181983 Jy ! Component: 100 - total flux cleaned = 0.258604 Jy ! Component: 150 - total flux cleaned = 0.302134 Jy ! Component: 200 - total flux cleaned = 0.329601 Jy ! Total flux subtracted in 200 components = 0.329601 Jy ! Clean residual min=-0.010436 max=0.014616 Jy/beam ! Clean residual mean=0.000026 rms=0.002858 Jy/beam ! Combined flux in latest and established models = 0.329601 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.329601 Jy ! Inverting map and beam ! Estimated beam: bmin=4.528 mas, bmaj=10.61 mas, bpa=17.13 degrees ! Estimated noise=0.656145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231824 Jy ! Component: 100 - total flux cleaned = 0.037697 Jy ! Component: 150 - total flux cleaned = 0.0431363 Jy ! Component: 200 - total flux cleaned = 0.0454484 Jy ! Total flux subtracted in 200 components = 0.0454484 Jy ! Clean residual min=-0.007534 max=0.005701 Jy/beam ! Clean residual mean=0.000003 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.375049 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 57 components and 0.375049 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.367 mas, bmaj=12.88 mas, bpa=4.359 degrees ! Estimated noise=0.741317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466161 Jy ! Component: 100 - total flux cleaned = 0.00466714 Jy ! Component: 150 - total flux cleaned = 0.00427333 Jy ! Component: 200 - total flux cleaned = 0.00392578 Jy ! Total flux subtracted in 200 components = 0.00392578 Jy ! Clean residual min=-0.004540 max=0.003828 Jy/beam ! Clean residual mean=-0.000000 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.378975 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26002e-06 Jy ! Component: 100 - total flux cleaned = -0.000107438 Jy ! Component: 150 - total flux cleaned = -0.000201274 Jy ! Component: 200 - total flux cleaned = -0.000202005 Jy ! Total flux subtracted in 200 components = -0.000202005 Jy ! Clean residual min=-0.004175 max=0.003709 Jy/beam ! Clean residual mean=-0.000001 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.378773 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 94 components and 0.378773 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.528 mas, bmaj=10.61 mas, bpa=17.13 degrees ! Estimated noise=0.656145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000553832 Jy ! Component: 100 - total flux cleaned = 0.00160976 Jy ! Component: 150 - total flux cleaned = 0.00209055 Jy ! Component: 200 - total flux cleaned = 0.00224085 Jy ! Total flux subtracted in 200 components = 0.00224085 Jy ! Clean residual min=-0.006176 max=0.005074 Jy/beam ! Clean residual mean=-0.000000 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.381014 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 0.381014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070267Jy sigma=1.333779 ! Fit after self-cal, rms=0.070210Jy sigma=1.333128 wmodel /scr/pima/bg219e_uvs/J0513+0100_S_map.mod ! Writing 107 model components to file: /scr/pima/bg219e_uvs/J0513+0100_S_map.mod wobs /scr/pima/bg219e_uvs/J0513+0100_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J0513+0100_S_uvs.fits wwins /scr/pima/bg219e_uvs/J0513+0100_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J0513+0100_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00260983 Jy ! Component: 100 - total flux cleaned = -0.00382306 Jy ! Component: 150 - total flux cleaned = -0.00478172 Jy ! Component: 200 - total flux cleaned = -0.00536328 Jy ! Component: 250 - total flux cleaned = -0.00560062 Jy ! Component: 300 - total flux cleaned = -0.00559894 Jy ! Component: 350 - total flux cleaned = -0.00559896 Jy ! Component: 400 - total flux cleaned = -0.00559948 Jy ! Component: 450 - total flux cleaned = -0.00546074 Jy ! Component: 500 - total flux cleaned = -0.00539385 Jy ! Component: 550 - total flux cleaned = -0.00532829 Jy ! Component: 600 - total flux cleaned = -0.00519832 Jy ! Component: 650 - total flux cleaned = -0.00513485 Jy ! Component: 700 - total flux cleaned = -0.00501164 Jy ! Component: 750 - total flux cleaned = -0.00507011 Jy ! Component: 800 - total flux cleaned = -0.00471736 Jy ! Component: 850 - total flux cleaned = -0.00489266 Jy ! Component: 900 - total flux cleaned = -0.0048917 Jy ! Component: 950 - total flux cleaned = -0.00483602 Jy ! Component: 1000 - total flux cleaned = -0.00461926 Jy ! Component: 1050 - total flux cleaned = -0.00456598 Jy ! Component: 1100 - total flux cleaned = -0.00451467 Jy ! Component: 1150 - total flux cleaned = -0.00425808 Jy ! Component: 1200 - total flux cleaned = -0.00405718 Jy ! Component: 1250 - total flux cleaned = -0.0040073 Jy ! Component: 1300 - total flux cleaned = -0.00400697 Jy ! Component: 1350 - total flux cleaned = -0.00381319 Jy ! Component: 1400 - total flux cleaned = -0.00362517 Jy ! Component: 1450 - total flux cleaned = -0.00376544 Jy ! Component: 1500 - total flux cleaned = -0.00371863 Jy ! Component: 1550 - total flux cleaned = -0.00353766 Jy ! Component: 1600 - total flux cleaned = -0.00349259 Jy ! Component: 1650 - total flux cleaned = -0.00327284 Jy ! Component: 1700 - total flux cleaned = -0.00314324 Jy ! Component: 1750 - total flux cleaned = -0.00288857 Jy ! Component: 1800 - total flux cleaned = -0.00284752 Jy ! Component: 1850 - total flux cleaned = -0.00272347 Jy ! Component: 1900 - total flux cleaned = -0.00272366 Jy ! Component: 1950 - total flux cleaned = -0.00272433 Jy ! Component: 2000 - total flux cleaned = -0.00256632 Jy ! Component: 2050 - total flux cleaned = -0.00264422 Jy ! Component: 2100 - total flux cleaned = -0.00268256 Jy ! Component: 2150 - total flux cleaned = -0.00253108 Jy ! Component: 2200 - total flux cleaned = -0.00260608 Jy ! Component: 2250 - total flux cleaned = -0.00253181 Jy ! Component: 2300 - total flux cleaned = -0.00260483 Jy ! Component: 2350 - total flux cleaned = -0.00253175 Jy ! Component: 2400 - total flux cleaned = -0.00242514 Jy ! Component: 2450 - total flux cleaned = -0.00239005 Jy ! Component: 2500 - total flux cleaned = -0.00225009 Jy ! Component: 2550 - total flux cleaned = -0.00231906 Jy ! Component: 2600 - total flux cleaned = -0.00231891 Jy ! Component: 2650 - total flux cleaned = -0.00238543 Jy ! Component: 2700 - total flux cleaned = -0.0022859 Jy ! Component: 2750 - total flux cleaned = -0.0022853 Jy ! Component: 2800 - total flux cleaned = -0.00218837 Jy ! Component: 2850 - total flux cleaned = -0.00218877 Jy ! Component: 2900 - total flux cleaned = -0.00218911 Jy ! Component: 2950 - total flux cleaned = -0.0022207 Jy ! Component: 3000 - total flux cleaned = -0.00212744 Jy ! Component: 3050 - total flux cleaned = -0.00218921 Jy ! Component: 3100 - total flux cleaned = -0.0022502 Jy ! Component: 3150 - total flux cleaned = -0.00222014 Jy ! Component: 3200 - total flux cleaned = -0.0021906 Jy ! Component: 3250 - total flux cleaned = -0.00221995 Jy ! Component: 3300 - total flux cleaned = -0.00219057 Jy ! Component: 3350 - total flux cleaned = -0.00219082 Jy ! Component: 3400 - total flux cleaned = -0.00239134 Jy ! Component: 3450 - total flux cleaned = -0.00236239 Jy ! Component: 3500 - total flux cleaned = -0.00236233 Jy ! Component: 3550 - total flux cleaned = -0.00227886 Jy ! Component: 3600 - total flux cleaned = -0.00244447 Jy ! Component: 3650 - total flux cleaned = -0.00244448 Jy ! Component: 3700 - total flux cleaned = -0.00247153 Jy ! Component: 3750 - total flux cleaned = -0.00249866 Jy ! Component: 3800 - total flux cleaned = -0.00255228 Jy ! Component: 3850 - total flux cleaned = -0.00271016 Jy ! Component: 3900 - total flux cleaned = -0.00273641 Jy ! Component: 3950 - total flux cleaned = -0.00271076 Jy ! Component: 4000 - total flux cleaned = -0.00266007 Jy ! Component: 4050 - total flux cleaned = -0.00281208 Jy ! Total flux subtracted in 4096 components = -0.00276147 Jy ! Clean residual min=-0.001344 max=0.001425 Jy/beam ! Clean residual mean=0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.378253 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 403 components and 0.378253 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J0513+0100_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.528 x 10.61 at 17.13 degrees (North through East) ! Clean map min=-0.0084009 max=0.22076 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0513+0100_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.220756 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000499078 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.678229 0.678229 1.35646 2.71292 5.42584 10.8517 21.7033 43.4067 86.8134 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.22 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 442.328 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0513+0100_S_uvs.log closed on Thu Apr 7 06:36:23 2016