! Started logfile: /scr/pima/bg219e_uvs/J0506-0950_S_dfm.log on Thu May 19 18:23:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0506-0950_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0506-0950_S_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.909381 visibilities/baseline/integration-bin.
! Found source: J0506-0950
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7988 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0506-0950_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005035Jy  sigma=19.399048
! Fit after  self-cal, rms=0.873259Jy  sigma=16.888801
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.437 mas, bmaj=10.25 mas, bpa=19.59 degrees
! Estimated noise=0.66662 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10079 Jy
! Component: 100  -  total flux cleaned = 0.122783 Jy
! Total flux subtracted in 100 components = 0.122783 Jy
! Clean residual min=-0.004045 max=0.006190 Jy/beam
! Clean residual mean=0.000007 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 0.122783 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.122783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083943Jy  sigma=1.355184
! Fit after  self-cal, rms=0.083937Jy  sigma=1.355084
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.137 mas, bmaj=11.38 mas, bpa=18.31 degrees
! Estimated noise=0.459879 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00579603 Jy
! Component: 100  -  total flux cleaned = 0.00789386 Jy
! Component: 150  -  total flux cleaned = 0.00885664 Jy
! Component: 200  -  total flux cleaned = 0.00908511 Jy
! Total flux subtracted in 200 components = 0.00908511 Jy
! Clean residual min=-0.002580 max=0.002761 Jy/beam
! Clean residual mean=0.000004 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.131868 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 29 components and 0.131868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083479Jy  sigma=1.348515
! Fit after  self-cal, rms=0.083487Jy  sigma=1.348473
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.137 x 11.38 at 18.31 degrees (North through East)
! Clean map  min=-0.0025278  max=0.12904 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.02     KP        1.00     
!   LA        1.00     NL        1.04     OV        1.00     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.99     KP        1.02     
!   LA        1.02     NL        0.96     OV        0.98     PT        1.03     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.04     KP        0.99     
!   LA        1.00     NL        0.98     OV        0.99     PT        1.01     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.98     KP        1.03     
!   LA        0.98     NL        0.91     OV        0.97     PT        0.98     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.083487Jy  sigma=1.348473
! Fit after  self-cal, rms=0.082124Jy  sigma=1.345502
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.134 mas, bmaj=11.38 mas, bpa=18.36 degrees
! Estimated noise=0.461299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000746916 Jy
! Component: 100  -  total flux cleaned = 0.000829873 Jy
! Component: 150  -  total flux cleaned = 0.000864603 Jy
! Component: 200  -  total flux cleaned = 0.000894672 Jy
! Total flux subtracted in 200 components = 0.000894672 Jy
! Clean residual min=-0.002588 max=0.002557 Jy/beam
! Clean residual mean=0.000003 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.132763 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 41 components and 0.132763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082109Jy  sigma=1.345366
! Fit after  self-cal, rms=0.082117Jy  sigma=1.345300
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082117Jy  sigma=1.345300
! Fit after  self-cal, rms=0.082718Jy  sigma=1.341947
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.122 mas, bmaj=11.36 mas, bpa=18.44 degrees
! Estimated noise=0.465543 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130928 Jy
! Component: 100  -  total flux cleaned = 0.00185448 Jy
! Component: 150  -  total flux cleaned = 0.00195762 Jy
! Component: 200  -  total flux cleaned = 0.00199973 Jy
! Total flux subtracted in 200 components = 0.00199973 Jy
! Clean residual min=-0.002361 max=0.002475 Jy/beam
! Clean residual mean=0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.134763 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 56 components and 0.134763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082680Jy  sigma=1.341747
! Fit after  self-cal, rms=0.082688Jy  sigma=1.341689
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.93667e-05 Jy
! Component: 100  -  total flux cleaned = 2.76373e-05 Jy
! Component: 150  -  total flux cleaned = 3.88439e-05 Jy
! Component: 200  -  total flux cleaned = 2.78254e-05 Jy
! Total flux subtracted in 200 components = 2.78254e-05 Jy
! Clean residual min=-0.002381 max=0.002466 Jy/beam
! Clean residual mean=0.000003 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.134791 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 61 components and 0.134791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082682Jy  sigma=1.341642
! Fit after  self-cal, rms=0.082682Jy  sigma=1.341635
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082682Jy  sigma=1.341635
! Fit after  self-cal, rms=0.083244Jy  sigma=1.341325
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.11 mas, bmaj=11.35 mas, bpa=18.53 degrees
! Estimated noise=0.469811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116752 Jy
! Component: 100  -  total flux cleaned = 0.00170556 Jy
! Component: 150  -  total flux cleaned = 0.00174777 Jy
! Component: 200  -  total flux cleaned = 0.00174804 Jy
! Total flux subtracted in 200 components = 0.00174804 Jy
! Clean residual min=-0.002400 max=0.002479 Jy/beam
! Clean residual mean=0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.136539 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 65 components and 0.136539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083212Jy  sigma=1.341190
! Fit after  self-cal, rms=0.083213Jy  sigma=1.341178
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101214 Jy
! Component: 100  -  total flux cleaned = 9.06607e-05 Jy
! Component: 150  -  total flux cleaned = 7.2164e-05 Jy
! Component: 200  -  total flux cleaned = 6.37133e-05 Jy
! Total flux subtracted in 200 components = 6.37133e-05 Jy
! Clean residual min=-0.002411 max=0.002478 Jy/beam
! Clean residual mean=0.000003 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.136602 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.136602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083208Jy  sigma=1.341157
! Fit after  self-cal, rms=0.083209Jy  sigma=1.341152
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083209Jy  sigma=1.341152
! Fit after  self-cal, rms=0.083739Jy  sigma=1.340897
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.173 mas, bmaj=14.82 mas, bpa=11.12 degrees
! Estimated noise=0.543839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111405 Jy
! Component: 100  -  total flux cleaned = 0.00131969 Jy
! Component: 150  -  total flux cleaned = 0.00134478 Jy
! Component: 200  -  total flux cleaned = 0.00133421 Jy
! Total flux subtracted in 200 components = 0.00133421 Jy
! Clean residual min=-0.002692 max=0.002536 Jy/beam
! Clean residual mean=0.000006 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.137937 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 89 components and 0.137937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083716Jy  sigma=1.340859
! Fit after  self-cal, rms=0.083716Jy  sigma=1.340853
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.02989e-05 Jy
! Component: 100  -  total flux cleaned = -3.37518e-05 Jy
! Component: 150  -  total flux cleaned = -7.40768e-05 Jy
! Component: 200  -  total flux cleaned = -0.000111348 Jy
! Total flux subtracted in 200 components = -0.000111348 Jy
! Clean residual min=-0.002679 max=0.002551 Jy/beam
! Clean residual mean=0.000006 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.137825 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 97 components and 0.137825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083714Jy  sigma=1.340895
! Fit after  self-cal, rms=0.083714Jy  sigma=1.340892
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.1 mas, bmaj=11.34 mas, bpa=18.61 degrees
! Estimated noise=0.473781 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.1 x 11.34 at 18.61 degrees (North through East)
! Clean map  min=-0.0023954  max=0.13235 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.411 mas, bmaj=10.24 mas, bpa=19.87 degrees
! Estimated noise=0.683254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103264 Jy
! Component: 100  -  total flux cleaned = 0.125898 Jy
! Component: 150  -  total flux cleaned = 0.132478 Jy
! Component: 200  -  total flux cleaned = 0.135608 Jy
! Total flux subtracted in 200 components = 0.135608 Jy
! Clean residual min=-0.003927 max=0.003754 Jy/beam
! Clean residual mean=0.000002 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.135608 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.135608 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.1 mas, bmaj=11.34 mas, bpa=18.61 degrees
! Estimated noise=0.473781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192571 Jy
! Component: 100  -  total flux cleaned = 0.002295 Jy
! Component: 150  -  total flux cleaned = 0.00247011 Jy
! Component: 200  -  total flux cleaned = 0.00256078 Jy
! Total flux subtracted in 200 components = 0.00256078 Jy
! Clean residual min=-0.002428 max=0.002478 Jy/beam
! Clean residual mean=0.000003 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.138169 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 37 components and 0.138169 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.173 mas, bmaj=14.82 mas, bpa=11.12 degrees
! Estimated noise=0.543839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.23855e-05 Jy
! Component: 100  -  total flux cleaned = -0.000122134 Jy
! Component: 150  -  total flux cleaned = -0.000169164 Jy
! Component: 200  -  total flux cleaned = -0.000201757 Jy
! Total flux subtracted in 200 components = -0.000201757 Jy
! Clean residual min=-0.002687 max=0.002550 Jy/beam
! Clean residual mean=0.000006 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.137967 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.99975e-05 Jy
! Component: 100  -  total flux cleaned = -5.80928e-05 Jy
! Component: 150  -  total flux cleaned = -8.40152e-05 Jy
! Component: 200  -  total flux cleaned = -0.000100409 Jy
! Total flux subtracted in 200 components = -0.000100409 Jy
! Clean residual min=-0.002680 max=0.002556 Jy/beam
! Clean residual mean=0.000006 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.137867 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 57 components and 0.137867 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.1 mas, bmaj=11.34 mas, bpa=18.61 degrees
! Estimated noise=0.473781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000191297 Jy
! Component: 100  -  total flux cleaned = 0.000208329 Jy
! Component: 150  -  total flux cleaned = 0.00020747 Jy
! Component: 200  -  total flux cleaned = 0.000195366 Jy
! Total flux subtracted in 200 components = 0.000195366 Jy
! Clean residual min=-0.002444 max=0.002472 Jy/beam
! Clean residual mean=0.000003 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.138062 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 69 components and 0.138062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083714Jy  sigma=1.340925
! Fit after  self-cal, rms=0.083716Jy  sigma=1.340921
wmodel /J0506-0950_S_map.mod
! wmodel: Unable to open new model file: /J0506-0950_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0506-0950_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.1 x 11.34 at 18.61 degrees (North through East)
! Clean map  min=-0.0023848  max=0.13235 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0506-0950_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.13235 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000653618 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.48157 1.48157 2.96314 5.92627 11.8525 23.7051 47.4102 94.8203
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.132 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  202.488 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0506-0950_S_dfm.log closed on Thu May 19 18:23:58 2016