! Started logfile: /scr/pima/bg219e_uvs/J0503-2128_S_dfm.log on Thu May 19 18:23:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0503-2128_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0503-2128_S_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.836066 visibilities/baseline/integration-bin.
! Found source: J0503-2128
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7344 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0503-2128_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.045984Jy  sigma=18.202320
! Fit after  self-cal, rms=0.685861Jy  sigma=11.986385
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=11.45 mas, bpa=10.05 degrees
! Estimated noise=0.862429 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.235657 Jy
! Component: 100  -  total flux cleaned = 0.290502 Jy
! Total flux subtracted in 100 components = 0.290502 Jy
! Clean residual min=-0.018580 max=0.058376 Jy/beam
! Clean residual mean=-0.000001 rms=0.005599 Jy/beam
! Combined flux in latest and established models = 0.290502 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.290502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119673Jy  sigma=2.026274
! Fit after  self-cal, rms=0.119657Jy  sigma=2.025384
! Inverting map 
! Added new window around map position (-5, -17.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0476985 Jy
! Component: 100  -  total flux cleaned = 0.0703763 Jy
! Total flux subtracted in 100 components = 0.0703763 Jy
! Clean residual min=-0.013748 max=0.017350 Jy/beam
! Clean residual mean=-0.000002 rms=0.003349 Jy/beam
! Combined flux in latest and established models = 0.360878 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.360878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095558Jy  sigma=1.592260
! Fit after  self-cal, rms=0.092036Jy  sigma=1.532411
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213494 Jy
! Component: 100  -  total flux cleaned = 0.03499 Jy
! Total flux subtracted in 100 components = 0.03499 Jy
! Clean residual min=-0.008884 max=0.009409 Jy/beam
! Clean residual mean=0.000000 rms=0.002129 Jy/beam
! Combined flux in latest and established models = 0.395868 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.395868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084778Jy  sigma=1.400520
! Fit after  self-cal, rms=0.084128Jy  sigma=1.390334
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.896 mas, bmaj=13.47 mas, bpa=7.812 degrees
! Estimated noise=0.512885 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165514 Jy
! Component: 100  -  total flux cleaned = 0.0269202 Jy
! Component: 150  -  total flux cleaned = 0.0339648 Jy
! Component: 200  -  total flux cleaned = 0.038896 Jy
! Total flux subtracted in 200 components = 0.038896 Jy
! Clean residual min=-0.006196 max=0.005964 Jy/beam
! Clean residual mean=0.000016 rms=0.001319 Jy/beam
! Combined flux in latest and established models = 0.434764 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 66 components and 0.434764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080222Jy  sigma=1.322892
! Fit after  self-cal, rms=0.080010Jy  sigma=1.319799
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.896 x 13.47 at 7.812 degrees (North through East)
! Clean map  min=-0.0058409  max=0.29841 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.98     HN        1.00     KP        1.00     
!   LA        0.98     NL        1.01     OV        1.01     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.02     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.99     KP        0.98     
!   LA        0.99     NL        1.00     OV        0.97     PT        0.99     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.080010Jy  sigma=1.319799
! Fit after  self-cal, rms=0.079466Jy  sigma=1.300717
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.905 mas, bmaj=13.51 mas, bpa=7.771 degrees
! Estimated noise=0.51303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00256721 Jy
! Component: 100  -  total flux cleaned = 0.0030022 Jy
! Component: 150  -  total flux cleaned = 0.00295989 Jy
! Component: 200  -  total flux cleaned = 0.00300334 Jy
! Total flux subtracted in 200 components = 0.00300334 Jy
! Clean residual min=-0.004520 max=0.004267 Jy/beam
! Clean residual mean=0.000016 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.437767 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.437767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079346Jy  sigma=1.299088
! Fit after  self-cal, rms=0.079325Jy  sigma=1.298768
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079325Jy  sigma=1.298768
! Fit after  self-cal, rms=0.079460Jy  sigma=1.297379
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.903 mas, bmaj=13.51 mas, bpa=7.789 degrees
! Estimated noise=0.514392 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187306 Jy
! Component: 100  -  total flux cleaned = 0.00247752 Jy
! Component: 150  -  total flux cleaned = 0.00266416 Jy
! Component: 200  -  total flux cleaned = 0.00269743 Jy
! Total flux subtracted in 200 components = 0.00269743 Jy
! Clean residual min=-0.004499 max=0.004084 Jy/beam
! Clean residual mean=0.000015 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 0.440465 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.440465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079387Jy  sigma=1.296692
! Fit after  self-cal, rms=0.079373Jy  sigma=1.296560
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000399207 Jy
! Component: 100  -  total flux cleaned = 0.000460232 Jy
! Component: 150  -  total flux cleaned = 0.000459863 Jy
! Component: 200  -  total flux cleaned = 0.000433898 Jy
! Total flux subtracted in 200 components = 0.000433898 Jy
! Clean residual min=-0.004402 max=0.004069 Jy/beam
! Clean residual mean=0.000015 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.440899 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 90 components and 0.440899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079347Jy  sigma=1.296225
! Fit after  self-cal, rms=0.079341Jy  sigma=1.296184
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079341Jy  sigma=1.296184
! Fit after  self-cal, rms=0.078073Jy  sigma=1.281437
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=13.51 mas, bpa=7.766 degrees
! Estimated noise=0.516689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000951925 Jy
! Component: 100  -  total flux cleaned = 0.000957693 Jy
! Component: 150  -  total flux cleaned = 0.000879923 Jy
! Component: 200  -  total flux cleaned = 0.000781808 Jy
! Total flux subtracted in 200 components = 0.000781808 Jy
! Clean residual min=-0.003384 max=0.002664 Jy/beam
! Clean residual mean=0.000006 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.44168 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 101 components and 0.44168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078024Jy  sigma=1.280646
! Fit after  self-cal, rms=0.078015Jy  sigma=1.280579
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.86424e-05 Jy
! Component: 100  -  total flux cleaned = -1.95396e-05 Jy
! Component: 150  -  total flux cleaned = -7.34541e-05 Jy
! Component: 200  -  total flux cleaned = -9.83518e-05 Jy
! Total flux subtracted in 200 components = -9.83518e-05 Jy
! Clean residual min=-0.003345 max=0.002683 Jy/beam
! Clean residual mean=0.000006 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.441582 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 0.441582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077996Jy  sigma=1.280296
! Fit after  self-cal, rms=0.077994Jy  sigma=1.280289
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077994Jy  sigma=1.280289
! Fit after  self-cal, rms=0.078217Jy  sigma=1.280059
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.769 mas, bmaj=18.08 mas, bpa=-2.012 degrees
! Estimated noise=0.611265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000559062 Jy
! Component: 100  -  total flux cleaned = 0.000399062 Jy
! Component: 150  -  total flux cleaned = 0.000264463 Jy
! Component: 200  -  total flux cleaned = 0.000207898 Jy
! Total flux subtracted in 200 components = 0.000207898 Jy
! Clean residual min=-0.003105 max=0.002910 Jy/beam
! Clean residual mean=0.000008 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.44179 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 130 components and 0.44179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078194Jy  sigma=1.279697
! Fit after  self-cal, rms=0.078191Jy  sigma=1.279663
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158771 Jy
! Component: 100  -  total flux cleaned = -0.00020932 Jy
! Component: 150  -  total flux cleaned = -0.000232157 Jy
! Component: 200  -  total flux cleaned = -0.000273786 Jy
! Total flux subtracted in 200 components = -0.000273786 Jy
! Clean residual min=-0.002954 max=0.002927 Jy/beam
! Clean residual mean=0.000008 rms=0.000918 Jy/beam
! Combined flux in latest and established models = 0.441516 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 141 components and 0.441516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078187Jy  sigma=1.279553
! Fit after  self-cal, rms=0.078183Jy  sigma=1.279523
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.901 mas, bmaj=13.51 mas, bpa=7.765 degrees
! Estimated noise=0.518262 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.901 x 13.51 at 7.765 degrees (North through East)
! Clean map  min=-0.0032051  max=0.30113 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.143 mas, bmaj=11.45 mas, bpa=10.01 degrees
! Estimated noise=0.870076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.237293 Jy
! Component: 100  -  total flux cleaned = 0.311699 Jy
! Component: 150  -  total flux cleaned = 0.348986 Jy
! Component: 200  -  total flux cleaned = 0.371802 Jy
! Total flux subtracted in 200 components = 0.371802 Jy
! Clean residual min=-0.007584 max=0.012189 Jy/beam
! Clean residual mean=0.000006 rms=0.002283 Jy/beam
! Combined flux in latest and established models = 0.371802 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.371802 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.901 mas, bmaj=13.51 mas, bpa=7.765 degrees
! Estimated noise=0.518262 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.025705 Jy
! Component: 100  -  total flux cleaned = 0.0410619 Jy
! Component: 150  -  total flux cleaned = 0.0509536 Jy
! Component: 200  -  total flux cleaned = 0.057541 Jy
! Total flux subtracted in 200 components = 0.057541 Jy
! Clean residual min=-0.003931 max=0.004077 Jy/beam
! Clean residual mean=0.000011 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.429343 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 70 components and 0.429343 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.769 mas, bmaj=18.08 mas, bpa=-2.012 degrees
! Estimated noise=0.611265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00602919 Jy
! Component: 100  -  total flux cleaned = 0.00907222 Jy
! Component: 150  -  total flux cleaned = 0.0107136 Jy
! Component: 200  -  total flux cleaned = 0.0115389 Jy
! Total flux subtracted in 200 components = 0.0115389 Jy
! Clean residual min=-0.002788 max=0.003103 Jy/beam
! Clean residual mean=0.000008 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.440882 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.59697e-05 Jy
! Component: 100  -  total flux cleaned = 8.06442e-05 Jy
! Component: 150  -  total flux cleaned = 6.04054e-05 Jy
! Component: 200  -  total flux cleaned = 4.06965e-05 Jy
! Total flux subtracted in 200 components = 4.06965e-05 Jy
! Clean residual min=-0.002768 max=0.003073 Jy/beam
! Clean residual mean=0.000008 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.440923 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 117 components and 0.440923 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.901 mas, bmaj=13.51 mas, bpa=7.765 degrees
! Estimated noise=0.518262 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000824354 Jy
! Component: 100  -  total flux cleaned = 0.000880849 Jy
! Component: 150  -  total flux cleaned = 0.000880821 Jy
! Component: 200  -  total flux cleaned = 0.000798602 Jy
! Total flux subtracted in 200 components = 0.000798602 Jy
! Clean residual min=-0.003330 max=0.003054 Jy/beam
! Clean residual mean=0.000006 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.441722 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 133 components and 0.441722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078226Jy  sigma=1.280535
! Fit after  self-cal, rms=0.078213Jy  sigma=1.280313
wmodel /J0503-2128_S_map.mod
! wmodel: Unable to open new model file: /J0503-2128_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0503-2128_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.901 x 13.51 at 7.765 degrees (North through East)
! Clean map  min=-0.0032379  max=0.3023 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0503-2128_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.302298 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000759472 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.753698 0.753698 1.5074 3.01479 6.02959 12.0592 24.1183 48.2367 96.4734
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.302 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  398.037 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0503-2128_S_dfm.log closed on Thu May 19 18:23:50 2016