! Started logfile: /scr/pima/bg219e_uvs/J0448-2109_X_dfm.log on Thu May 19 18:23:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0448-2109_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0448-2109_X_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.893697 visibilities/baseline/integration-bin.
! Found source: J0448-2109
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20076 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0448-2109_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026018Jy  sigma=22.364847
! Fit after  self-cal, rms=0.792353Jy  sigma=17.141061
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7965 mas, bmaj=3.126 mas, bpa=12.35 degrees
! Estimated noise=0.478078 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15561 Jy
! Component: 100  -  total flux cleaned = 0.192128 Jy
! Total flux subtracted in 100 components = 0.192128 Jy
! Clean residual min=-0.006442 max=0.015292 Jy/beam
! Clean residual mean=-0.000017 rms=0.001944 Jy/beam
! Combined flux in latest and established models = 0.192128 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.192128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075614Jy  sigma=1.571699
! Fit after  self-cal, rms=0.075607Jy  sigma=1.571437
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018109 Jy
! Component: 100  -  total flux cleaned = 0.0288732 Jy
! Total flux subtracted in 100 components = 0.0288732 Jy
! Clean residual min=-0.003934 max=0.005504 Jy/beam
! Clean residual mean=-0.000008 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 0.221001 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.221001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068929Jy  sigma=1.409221
! Fit after  self-cal, rms=0.068918Jy  sigma=1.408579
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=3.506 mas, bpa=10.04 degrees
! Estimated noise=0.245856 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103086 Jy
! Component: 100  -  total flux cleaned = 0.0150958 Jy
! Component: 150  -  total flux cleaned = 0.0179381 Jy
! Component: 200  -  total flux cleaned = 0.019763 Jy
! Total flux subtracted in 200 components = 0.019763 Jy
! Clean residual min=-0.002354 max=0.004265 Jy/beam
! Clean residual mean=-0.000007 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.240764 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 45 components and 0.240764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067528Jy  sigma=1.375234
! Fit after  self-cal, rms=0.067538Jy  sigma=1.375088
! Inverting map 
! Added new window around map position (2.8, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00355447 Jy
! Component: 100  -  total flux cleaned = 0.00497132 Jy
! Component: 150  -  total flux cleaned = 0.005699 Jy
! Component: 200  -  total flux cleaned = 0.00614257 Jy
! Total flux subtracted in 200 components = 0.00614257 Jy
! Clean residual min=-0.002016 max=0.002782 Jy/beam
! Clean residual mean=-0.000004 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.246907 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 87 components and 0.246907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067349Jy  sigma=1.370968
! Fit after  self-cal, rms=0.067322Jy  sigma=1.369994
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.039 x 3.506 at 10.04 degrees (North through East)
! Clean map  min=-0.001975  max=0.20947 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.03     KP        1.01     
!   LA        1.02     NL        1.01     OV        1.01     PT        0.98     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.01     KP        1.01     
!   LA        1.02     NL        1.02     OV        1.02     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.04     KP        0.98     
!   LA        0.99     NL        0.99     OV        1.00     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.05     KP        1.03     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.99     NL        1.00     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.02     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        0.96     
!   LA        1.01     NL        1.01     OV        1.01     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.04     KP        0.98     
!   LA        1.02     NL        1.02     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        0.97     
!   LA        1.02     NL        0.99     OV        1.01     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.00     KP        1.00     
!   LA        1.01     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.04     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.99     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.067322Jy  sigma=1.369994
! Fit after  self-cal, rms=0.067394Jy  sigma=1.364210
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=3.516 mas, bpa=10.07 degrees
! Estimated noise=0.246586 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.2, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172514 Jy
! Component: 100  -  total flux cleaned = 0.00221445 Jy
! Component: 150  -  total flux cleaned = 0.00243532 Jy
! Component: 200  -  total flux cleaned = 0.0025653 Jy
! Total flux subtracted in 200 components = 0.0025653 Jy
! Clean residual min=-0.001410 max=0.001445 Jy/beam
! Clean residual mean=-0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.249472 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 118 components and 0.249472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067335Jy  sigma=1.362862
! Fit after  self-cal, rms=0.067335Jy  sigma=1.362772
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067335Jy  sigma=1.362772
! Fit after  self-cal, rms=0.067391Jy  sigma=1.362730
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.041 mas, bmaj=3.517 mas, bpa=10.08 degrees
! Estimated noise=0.246544 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000544324 Jy
! Component: 100  -  total flux cleaned = 0.000693118 Jy
! Component: 150  -  total flux cleaned = 0.000693194 Jy
! Component: 200  -  total flux cleaned = 0.000711794 Jy
! Total flux subtracted in 200 components = 0.000711794 Jy
! Clean residual min=-0.001434 max=0.001405 Jy/beam
! Clean residual mean=-0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.250184 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 138 components and 0.250184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067376Jy  sigma=1.362424
! Fit after  self-cal, rms=0.067375Jy  sigma=1.362404
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271307 Jy
! Component: 100  -  total flux cleaned = 0.000254953 Jy
! Component: 150  -  total flux cleaned = 0.000209011 Jy
! Component: 200  -  total flux cleaned = 0.000195177 Jy
! Total flux subtracted in 200 components = 0.000195177 Jy
! Clean residual min=-0.001421 max=0.001395 Jy/beam
! Clean residual mean=-0.000001 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.250379 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 147 components and 0.250379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067368Jy  sigma=1.362257
! Fit after  self-cal, rms=0.067367Jy  sigma=1.362246
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067367Jy  sigma=1.362246
! Fit after  self-cal, rms=0.067437Jy  sigma=1.359573
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=3.518 mas, bpa=10.08 degrees
! Estimated noise=0.246611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155226 Jy
! Component: 100  -  total flux cleaned = 0.000183384 Jy
! Component: 150  -  total flux cleaned = 0.000195429 Jy
! Component: 200  -  total flux cleaned = 0.00018432 Jy
! Total flux subtracted in 200 components = 0.00018432 Jy
! Clean residual min=-0.001200 max=0.001276 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.250564 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 164 components and 0.250564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067432Jy  sigma=1.359462
! Fit after  self-cal, rms=0.067435Jy  sigma=1.359436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000166534 Jy
! Component: 100  -  total flux cleaned = 0.000145956 Jy
! Component: 150  -  total flux cleaned = 0.000116512 Jy
! Component: 200  -  total flux cleaned = 7.98977e-05 Jy
! Total flux subtracted in 200 components = 7.98977e-05 Jy
! Clean residual min=-0.001198 max=0.001285 Jy/beam
! Clean residual mean=-0.000001 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.250643 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 178 components and 0.250643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067432Jy  sigma=1.359375
! Fit after  self-cal, rms=0.067431Jy  sigma=1.359370
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067431Jy  sigma=1.359370
! Fit after  self-cal, rms=0.067486Jy  sigma=1.359353
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.243 mas, bmaj=5.021 mas, bpa=-1.56 degrees
! Estimated noise=0.289587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000127229 Jy
! Component: 100  -  total flux cleaned = -0.000192031 Jy
! Component: 150  -  total flux cleaned = -0.000246822 Jy
! Component: 200  -  total flux cleaned = -0.000286793 Jy
! Total flux subtracted in 200 components = -0.000286793 Jy
! Clean residual min=-0.001328 max=0.001181 Jy/beam
! Clean residual mean=-0.000002 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.250357 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 194 components and 0.250357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067484Jy  sigma=1.359315
! Fit after  self-cal, rms=0.067485Jy  sigma=1.359306
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.60267e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105684 Jy
! Component: 150  -  total flux cleaned = -0.000132529 Jy
! Component: 200  -  total flux cleaned = -0.000164998 Jy
! Total flux subtracted in 200 components = -0.000164998 Jy
! Clean residual min=-0.001315 max=0.001157 Jy/beam
! Clean residual mean=-0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.250192 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 199 components and 0.250192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067484Jy  sigma=1.359292
! Fit after  self-cal, rms=0.067484Jy  sigma=1.359289
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=3.519 mas, bpa=10.09 degrees
! Estimated noise=0.246607 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.042 x 3.519 at 10.09 degrees (North through East)
! Clean map  min=-0.0011328  max=0.20968 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7974 mas, bmaj=3.137 mas, bpa=12.38 degrees
! Estimated noise=0.48201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156574 Jy
! Component: 100  -  total flux cleaned = 0.193258 Jy
! Component: 150  -  total flux cleaned = 0.211301 Jy
! Component: 200  -  total flux cleaned = 0.221995 Jy
! Total flux subtracted in 200 components = 0.221995 Jy
! Clean residual min=-0.004098 max=0.005410 Jy/beam
! Clean residual mean=-0.000006 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.221995 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.221995 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=3.519 mas, bpa=10.09 degrees
! Estimated noise=0.246607 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010109 Jy
! Component: 100  -  total flux cleaned = 0.0155788 Jy
! Component: 150  -  total flux cleaned = 0.0187201 Jy
! Component: 200  -  total flux cleaned = 0.0209055 Jy
! Total flux subtracted in 200 components = 0.0209055 Jy
! Clean residual min=-0.001492 max=0.001482 Jy/beam
! Clean residual mean=-0.000003 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.2429 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 42 components and 0.2429 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.243 mas, bmaj=5.021 mas, bpa=-1.56 degrees
! Estimated noise=0.289587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246703 Jy
! Component: 100  -  total flux cleaned = 0.00409059 Jy
! Component: 150  -  total flux cleaned = 0.00519984 Jy
! Component: 200  -  total flux cleaned = 0.00569391 Jy
! Total flux subtracted in 200 components = 0.00569391 Jy
! Clean residual min=-0.001351 max=0.001403 Jy/beam
! Clean residual mean=-0.000003 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.248594 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000317898 Jy
! Component: 100  -  total flux cleaned = 0.000530722 Jy
! Component: 150  -  total flux cleaned = 0.000651747 Jy
! Component: 200  -  total flux cleaned = 0.000738593 Jy
! Total flux subtracted in 200 components = 0.000738593 Jy
! Clean residual min=-0.001332 max=0.001237 Jy/beam
! Clean residual mean=-0.000002 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.249333 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 120 components and 0.249333 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=3.519 mas, bpa=10.09 degrees
! Estimated noise=0.246607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000151877 Jy
! Component: 100  -  total flux cleaned = 0.000284742 Jy
! Component: 150  -  total flux cleaned = 0.00039995 Jy
! Component: 200  -  total flux cleaned = 0.000488925 Jy
! Total flux subtracted in 200 components = 0.000488925 Jy
! Clean residual min=-0.001245 max=0.001270 Jy/beam
! Clean residual mean=-0.000002 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.249822 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 146 components and 0.249822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067496Jy  sigma=1.359411
! Fit after  self-cal, rms=0.067493Jy  sigma=1.359384
wmodel /J0448-2109_X_map.mod
! wmodel: Unable to open new model file: /J0448-2109_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0448-2109_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.042 x 3.519 at 10.09 degrees (North through East)
! Clean map  min=-0.0011536  max=0.21035 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0448-2109_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.210352 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000298941 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.426345 0.426345 0.852689 1.70538 3.41076 6.82152 13.643 27.2861 54.5721
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.21 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  703.656 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0448-2109_X_dfm.log closed on Thu May 19 18:23:38 2016