! Started logfile: /scr/pima/bg219e_uvs/J0437-2954_X_dfm.log on Thu May 19 18:23:04 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0437-2954_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0437-2954_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.864969 visibilities/baseline/integration-bin.
! Found source: J0437-2954
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13452 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0437-2954_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031480Jy  sigma=20.036551
! Fit after  self-cal, rms=0.760178Jy  sigma=14.536303
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7892 mas, bmaj=4.134 mas, bpa=12.46 degrees
! Estimated noise=0.615232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172837 Jy
! Component: 100  -  total flux cleaned = 0.24401 Jy
! Total flux subtracted in 100 components = 0.24401 Jy
! Clean residual min=-0.013267 max=0.035227 Jy/beam
! Clean residual mean=-0.000064 rms=0.004323 Jy/beam
! Combined flux in latest and established models = 0.24401 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.24401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111337Jy  sigma=2.118172
! Fit after  self-cal, rms=0.110905Jy  sigma=2.113885
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0424017 Jy
! Component: 100  -  total flux cleaned = 0.0675617 Jy
! Total flux subtracted in 100 components = 0.0675617 Jy
! Clean residual min=-0.006879 max=0.012697 Jy/beam
! Clean residual mean=-0.000028 rms=0.002050 Jy/beam
! Combined flux in latest and established models = 0.311572 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 13 components and 0.311572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084233Jy  sigma=1.538251
! Fit after  self-cal, rms=0.084042Jy  sigma=1.536678
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153784 Jy
! Component: 100  -  total flux cleaned = 0.025363 Jy
! Total flux subtracted in 100 components = 0.025363 Jy
! Clean residual min=-0.005513 max=0.007565 Jy/beam
! Clean residual mean=-0.000014 rms=0.001499 Jy/beam
! Combined flux in latest and established models = 0.336935 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 36 components and 0.336935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078963Jy  sigma=1.418643
! Fit after  self-cal, rms=0.078924Jy  sigma=1.418235
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=4.424 mas, bpa=11 degrees
! Estimated noise=0.343745 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140225 Jy
! Component: 100  -  total flux cleaned = 0.0220258 Jy
! Component: 150  -  total flux cleaned = 0.0268692 Jy
! Component: 200  -  total flux cleaned = 0.0299429 Jy
! Total flux subtracted in 200 components = 0.0299429 Jy
! Clean residual min=-0.003601 max=0.007052 Jy/beam
! Clean residual mean=-0.000002 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 0.366878 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 93 components and 0.366878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076601Jy  sigma=1.360655
! Fit after  self-cal, rms=0.076587Jy  sigma=1.360443
! Inverting map 
! Added new window around map position (-2, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589887 Jy
! Component: 100  -  total flux cleaned = 0.00813264 Jy
! Component: 150  -  total flux cleaned = 0.00923147 Jy
! Component: 200  -  total flux cleaned = 0.0100008 Jy
! Total flux subtracted in 200 components = 0.0100008 Jy
! Clean residual min=-0.003170 max=0.004375 Jy/beam
! Clean residual mean=0.000003 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.376879 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 116 components and 0.376879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076038Jy  sigma=1.351737
! Fit after  self-cal, rms=0.075990Jy  sigma=1.350361
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.035 x 4.424 at 11 degrees (North through East)
! Clean map  min=-0.0031441  max=0.24666 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.17     KP        0.98     
!   LA        1.00     NL        1.00     OV        0.98     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.13     KP        0.99     
!   LA        0.99     NL        1.02     OV        1.02     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.15     KP        0.99     
!   LA        0.96     NL        0.99     OV        1.02     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.20     KP        0.98     
!   LA        0.98     NL        1.03     OV        1.01     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.09     KP        1.00     
!   LA        1.00     NL        1.03     OV        1.01     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.06     KP        0.97     
!   LA        1.00     NL        1.02     OV        1.01     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.18     KP        0.98     
!   LA        0.96     NL        1.04     OV        1.02     PT        1.07     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.16     KP        0.97     
!   LA        0.99     NL        1.02     OV        1.01     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.10     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.12     KP        0.98     
!   LA        1.00     NL        1.01     OV        1.00     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.10     KP        1.03     
!   LA        0.98     NL        1.03     OV        1.01     PT        1.01     
!   SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.14     KP        0.98     
!   LA        1.00     NL        1.01     OV        1.01     PT        1.00     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.075990Jy  sigma=1.350361
! Fit after  self-cal, rms=0.079246Jy  sigma=1.337165
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.036 mas, bmaj=4.485 mas, bpa=11.24 degrees
! Estimated noise=0.348468 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000147769 Jy
! Component: 100  -  total flux cleaned = 5.95784e-05 Jy
! Component: 150  -  total flux cleaned = 7.25311e-06 Jy
! Component: 200  -  total flux cleaned = 9.49015e-05 Jy
! Total flux subtracted in 200 components = 9.49015e-05 Jy
! Clean residual min=-0.002108 max=0.002490 Jy/beam
! Clean residual mean=0.000001 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.376974 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 137 components and 0.376974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079095Jy  sigma=1.335648
! Fit after  self-cal, rms=0.079113Jy  sigma=1.335426
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079113Jy  sigma=1.335426
! Fit after  self-cal, rms=0.079260Jy  sigma=1.335211
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.036 mas, bmaj=4.492 mas, bpa=11.26 degrees
! Estimated noise=0.348261 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000398658 Jy
! Component: 100  -  total flux cleaned = -0.00034827 Jy
! Component: 150  -  total flux cleaned = -0.00045586 Jy
! Component: 200  -  total flux cleaned = -0.000487547 Jy
! Total flux subtracted in 200 components = -0.000487547 Jy
! Clean residual min=-0.002024 max=0.002389 Jy/beam
! Clean residual mean=0.000000 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.376486 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 148 components and 0.376486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079197Jy  sigma=1.334581
! Fit after  self-cal, rms=0.079195Jy  sigma=1.334517
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015685 Jy
! Component: 100  -  total flux cleaned = 0.000156938 Jy
! Component: 150  -  total flux cleaned = 0.000101778 Jy
! Component: 200  -  total flux cleaned = 7.6344e-05 Jy
! Total flux subtracted in 200 components = 7.6344e-05 Jy
! Clean residual min=-0.001965 max=0.002311 Jy/beam
! Clean residual mean=0.000000 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.376562 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 152 components and 0.376562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079166Jy  sigma=1.334205
! Fit after  self-cal, rms=0.079164Jy  sigma=1.334164
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079164Jy  sigma=1.334164
! Fit after  self-cal, rms=0.079454Jy  sigma=1.327996
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.035 mas, bmaj=4.496 mas, bpa=11.28 degrees
! Estimated noise=0.348304 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000442336 Jy
! Component: 100  -  total flux cleaned = -0.000278939 Jy
! Component: 150  -  total flux cleaned = -0.000191498 Jy
! Component: 200  -  total flux cleaned = -0.000165307 Jy
! Total flux subtracted in 200 components = -0.000165307 Jy
! Clean residual min=-0.001915 max=0.002013 Jy/beam
! Clean residual mean=0.000004 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.376397 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 158 components and 0.376397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079418Jy  sigma=1.327641
! Fit after  self-cal, rms=0.079426Jy  sigma=1.327584
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000209901 Jy
! Component: 100  -  total flux cleaned = 0.000211357 Jy
! Component: 150  -  total flux cleaned = 0.00017071 Jy
! Component: 200  -  total flux cleaned = 0.000132444 Jy
! Total flux subtracted in 200 components = 0.000132444 Jy
! Clean residual min=-0.001910 max=0.001959 Jy/beam
! Clean residual mean=0.000004 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.37653 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 168 components and 0.37653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079409Jy  sigma=1.327429
! Fit after  self-cal, rms=0.079408Jy  sigma=1.327411
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079408Jy  sigma=1.327411
! Fit after  self-cal, rms=0.079706Jy  sigma=1.327312
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.339 mas, bmaj=6.352 mas, bpa=-1.997 degrees
! Estimated noise=0.40666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134079 Jy
! Component: 100  -  total flux cleaned = -7.12145e-05 Jy
! Component: 150  -  total flux cleaned = -0.000128674 Jy
! Component: 200  -  total flux cleaned = -0.000129148 Jy
! Total flux subtracted in 200 components = -0.000129148 Jy
! Clean residual min=-0.001682 max=0.001869 Jy/beam
! Clean residual mean=0.000006 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.3764 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 178 components and 0.3764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079695Jy  sigma=1.327200
! Fit after  self-cal, rms=0.079694Jy  sigma=1.327185
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.45666e-05 Jy
! Component: 100  -  total flux cleaned = 5.99535e-05 Jy
! Component: 150  -  total flux cleaned = 6.01653e-05 Jy
! Component: 200  -  total flux cleaned = 4.96981e-05 Jy
! Total flux subtracted in 200 components = 4.96981e-05 Jy
! Clean residual min=-0.001677 max=0.001849 Jy/beam
! Clean residual mean=0.000006 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.37645 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 185 components and 0.37645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079689Jy  sigma=1.327148
! Fit after  self-cal, rms=0.079689Jy  sigma=1.327145
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=4.502 mas, bpa=11.31 degrees
! Estimated noise=0.348475 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.034 x 4.502 at 11.31 degrees (North through East)
! Clean map  min=-0.001757  max=0.2483 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7845 mas, bmaj=4.215 mas, bpa=12.71 degrees
! Estimated noise=0.624995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.174713 Jy
! Component: 100  -  total flux cleaned = 0.246775 Jy
! Component: 150  -  total flux cleaned = 0.289069 Jy
! Component: 200  -  total flux cleaned = 0.314104 Jy
! Total flux subtracted in 200 components = 0.314104 Jy
! Clean residual min=-0.006261 max=0.012719 Jy/beam
! Clean residual mean=-0.000022 rms=0.001868 Jy/beam
! Combined flux in latest and established models = 0.314104 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.314104 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=4.502 mas, bpa=11.31 degrees
! Estimated noise=0.348475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.02377 Jy
! Component: 100  -  total flux cleaned = 0.0365463 Jy
! Component: 150  -  total flux cleaned = 0.0442836 Jy
! Component: 200  -  total flux cleaned = 0.0491892 Jy
! Total flux subtracted in 200 components = 0.0491892 Jy
! Clean residual min=-0.002705 max=0.002797 Jy/beam
! Clean residual mean=-0.000002 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.363293 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 58 components and 0.363293 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.339 mas, bmaj=6.352 mas, bpa=-1.997 degrees
! Estimated noise=0.40666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464985 Jy
! Component: 100  -  total flux cleaned = 0.00734652 Jy
! Component: 150  -  total flux cleaned = 0.00913048 Jy
! Component: 200  -  total flux cleaned = 0.0103647 Jy
! Total flux subtracted in 200 components = 0.0103647 Jy
! Clean residual min=-0.002084 max=0.001871 Jy/beam
! Clean residual mean=0.000006 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.373658 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000857431 Jy
! Component: 100  -  total flux cleaned = 0.00111057 Jy
! Component: 150  -  total flux cleaned = 0.00123765 Jy
! Component: 200  -  total flux cleaned = 0.00138041 Jy
! Total flux subtracted in 200 components = 0.00138041 Jy
! Clean residual min=-0.001934 max=0.001822 Jy/beam
! Clean residual mean=0.000006 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.375038 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 124 components and 0.375038 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=4.502 mas, bpa=11.31 degrees
! Estimated noise=0.348475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000170331 Jy
! Component: 100  -  total flux cleaned = -9.83441e-05 Jy
! Component: 150  -  total flux cleaned = -3.25517e-05 Jy
! Component: 200  -  total flux cleaned = 2.73319e-05 Jy
! Total flux subtracted in 200 components = 2.73319e-05 Jy
! Clean residual min=-0.002014 max=0.001957 Jy/beam
! Clean residual mean=0.000004 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.375066 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 139 components and 0.375066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079743Jy  sigma=1.327735
! Fit after  self-cal, rms=0.079732Jy  sigma=1.327684
wmodel /J0437-2954_X_map.mod
! wmodel: Unable to open new model file: /J0437-2954_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0437-2954_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.034 x 4.502 at 11.31 degrees (North through East)
! Clean map  min=-0.0018853  max=0.25128 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0437-2954_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.251285 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000482796 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.576393 0.576393 1.15279 2.30557 4.61114 9.22229 18.4446 36.8891 73.7783
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.251 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  520.478 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0437-2954_X_dfm.log closed on Thu May 19 18:23:07 2016