! Started logfile: /scr/pima/bg219e_uvs/J0425-1612_S_dfm.log on Thu May 19 18:22:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0425-1612_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0425-1612_S_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.819444 visibilities/baseline/integration-bin.
! Found source: J0425-1612
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7316 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0425-1612_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.060262Jy  sigma=20.496198
! Fit after  self-cal, rms=0.826021Jy  sigma=15.900012
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.195 mas, bmaj=11.31 mas, bpa=15.32 degrees
! Estimated noise=0.699537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142566 Jy
! Component: 100  -  total flux cleaned = 0.192908 Jy
! Total flux subtracted in 100 components = 0.192908 Jy
! Clean residual min=-0.033731 max=0.125912 Jy/beam
! Clean residual mean=-0.000023 rms=0.011026 Jy/beam
! Combined flux in latest and established models = 0.192908 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.192908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192189Jy  sigma=3.660332
! Fit after  self-cal, rms=0.189528Jy  sigma=3.607272
! Inverting map 
! Added new window around map position (23.5, 25).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106317 Jy
! Component: 100  -  total flux cleaned = 0.145951 Jy
! Total flux subtracted in 100 components = 0.145951 Jy
! Clean residual min=-0.018148 max=0.032274 Jy/beam
! Clean residual mean=-0.000095 rms=0.005735 Jy/beam
! Combined flux in latest and established models = 0.338859 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.338859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122845Jy  sigma=2.353236
! Fit after  self-cal, rms=0.110954Jy  sigma=2.145069
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0337104 Jy
! Component: 100  -  total flux cleaned = 0.055452 Jy
! Total flux subtracted in 100 components = 0.055452 Jy
! Clean residual min=-0.013588 max=0.029869 Jy/beam
! Clean residual mean=-0.000079 rms=0.004319 Jy/beam
! Combined flux in latest and established models = 0.394311 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 47 components and 0.394311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098025Jy  sigma=1.899114
! Fit after  self-cal, rms=0.097713Jy  sigma=1.893808
! Inverting map 
! Added new window around map position (45.5, 75.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0291186 Jy
! Component: 100  -  total flux cleaned = 0.0469793 Jy
! Total flux subtracted in 100 components = 0.0469793 Jy
! Clean residual min=-0.010341 max=0.013457 Jy/beam
! Clean residual mean=-0.000053 rms=0.003071 Jy/beam
! Combined flux in latest and established models = 0.44129 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 72 components and 0.44129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085950Jy  sigma=1.649949
! Fit after  self-cal, rms=0.085279Jy  sigma=1.637835
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.984 mas, bmaj=12.45 mas, bpa=13.4 degrees
! Estimated noise=0.46656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0229309 Jy
! Component: 100  -  total flux cleaned = 0.0400322 Jy
! Component: 150  -  total flux cleaned = 0.0539631 Jy
! Component: 200  -  total flux cleaned = 0.0654503 Jy
! Total flux subtracted in 200 components = 0.0654503 Jy
! Clean residual min=-0.009938 max=0.011921 Jy/beam
! Clean residual mean=-0.000026 rms=0.002969 Jy/beam
! Combined flux in latest and established models = 0.506741 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 118 components and 0.506741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076352Jy  sigma=1.443529
! Fit after  self-cal, rms=0.076057Jy  sigma=1.437853
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.984 x 12.45 at 13.4 degrees (North through East)
! Clean map  min=-0.009036  max=0.19946 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        0.99     KP        0.90     
!   LA        1.00     NL        1.05     OV        0.97     PT        0.93     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        1.00     KP        0.92     
!   LA        1.01     NL        1.04     OV        0.98     PT        0.92     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        0.99     KP        0.91     
!   LA        1.01     NL        1.03     OV        1.00     PT        0.92     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.04     KP        0.92     
!   LA        1.03     NL        1.09     OV        1.02     PT        0.94     
!   SC        1.05     
! 
! 
! Fit before self-cal, rms=0.076057Jy  sigma=1.437853
! Fit after  self-cal, rms=0.072353Jy  sigma=1.374635
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.053 mas, bmaj=12.62 mas, bpa=13.02 degrees
! Estimated noise=0.448773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00767466 Jy
! Component: 100  -  total flux cleaned = 0.0115562 Jy
! Component: 150  -  total flux cleaned = 0.0139825 Jy
! Component: 200  -  total flux cleaned = 0.0158757 Jy
! Total flux subtracted in 200 components = 0.0158757 Jy
! Clean residual min=-0.004999 max=0.007299 Jy/beam
! Clean residual mean=-0.000011 rms=0.001658 Jy/beam
! Combined flux in latest and established models = 0.522616 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 136 components and 0.522617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071246Jy  sigma=1.350675
! Fit after  self-cal, rms=0.071210Jy  sigma=1.348712
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071210Jy  sigma=1.348712
! Fit after  self-cal, rms=0.070548Jy  sigma=1.341278
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.048 mas, bmaj=12.63 mas, bpa=13.07 degrees
! Estimated noise=0.448331 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287491 Jy
! Component: 100  -  total flux cleaned = 0.00454492 Jy
! Component: 150  -  total flux cleaned = 0.00595494 Jy
! Component: 200  -  total flux cleaned = 0.00732752 Jy
! Total flux subtracted in 200 components = 0.00732752 Jy
! Clean residual min=-0.004783 max=0.006655 Jy/beam
! Clean residual mean=-0.000010 rms=0.001487 Jy/beam
! Combined flux in latest and established models = 0.529944 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 153 components and 0.529944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070225Jy  sigma=1.334652
! Fit after  self-cal, rms=0.070191Jy  sigma=1.334131
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (29.5, 73).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00614886 Jy
! Component: 100  -  total flux cleaned = 0.0090403 Jy
! Component: 150  -  total flux cleaned = 0.0111657 Jy
! Component: 200  -  total flux cleaned = 0.01312 Jy
! Total flux subtracted in 200 components = 0.01312 Jy
! Clean residual min=-0.003903 max=0.005266 Jy/beam
! Clean residual mean=-0.000013 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 0.543064 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 186 components and 0.543064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069590Jy  sigma=1.320306
! Fit after  self-cal, rms=0.069521Jy  sigma=1.319109
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069521Jy  sigma=1.319109
! Fit after  self-cal, rms=0.069325Jy  sigma=1.318658
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.048 mas, bmaj=12.62 mas, bpa=13.06 degrees
! Estimated noise=0.447007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00290345 Jy
! Component: 100  -  total flux cleaned = 0.00505274 Jy
! Component: 150  -  total flux cleaned = 0.00624685 Jy
! Component: 200  -  total flux cleaned = 0.00727945 Jy
! Total flux subtracted in 200 components = 0.00727945 Jy
! Clean residual min=-0.003406 max=0.004586 Jy/beam
! Clean residual mean=-0.000014 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.550343 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 213 components and 0.550343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069120Jy  sigma=1.314468
! Fit after  self-cal, rms=0.069109Jy  sigma=1.314191
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170577 Jy
! Component: 100  -  total flux cleaned = 0.00246683 Jy
! Component: 150  -  total flux cleaned = 0.00304734 Jy
! Component: 200  -  total flux cleaned = 0.00341782 Jy
! Total flux subtracted in 200 components = 0.00341782 Jy
! Clean residual min=-0.003227 max=0.004293 Jy/beam
! Clean residual mean=-0.000014 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.553761 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 226 components and 0.553761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068992Jy  sigma=1.311908
! Fit after  self-cal, rms=0.068988Jy  sigma=1.311830
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068988Jy  sigma=1.311830
! Fit after  self-cal, rms=0.068916Jy  sigma=1.311622
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.4 mas, bmaj=16.94 mas, bpa=4.054 degrees
! Estimated noise=0.509417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285908 Jy
! Component: 100  -  total flux cleaned = 0.00459053 Jy
! Component: 150  -  total flux cleaned = 0.00548128 Jy
! Component: 200  -  total flux cleaned = 0.0061389 Jy
! Total flux subtracted in 200 components = 0.0061389 Jy
! Clean residual min=-0.003597 max=0.004228 Jy/beam
! Clean residual mean=-0.000018 rms=0.001289 Jy/beam
! Combined flux in latest and established models = 0.5599 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 239 components and 0.5599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068835Jy  sigma=1.309850
! Fit after  self-cal, rms=0.068831Jy  sigma=1.309778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000783248 Jy
! Component: 100  -  total flux cleaned = 0.00149465 Jy
! Component: 150  -  total flux cleaned = 0.00203652 Jy
! Component: 200  -  total flux cleaned = 0.00260139 Jy
! Total flux subtracted in 200 components = 0.00260139 Jy
! Clean residual min=-0.003572 max=0.004068 Jy/beam
! Clean residual mean=-0.000018 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.562502 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 249 components and 0.562502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068799Jy  sigma=1.309057
! Fit after  self-cal, rms=0.068799Jy  sigma=1.309011
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.048 mas, bmaj=12.62 mas, bpa=13.02 degrees
! Estimated noise=0.446611 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.048 x 12.62 at 13.02 degrees (North through East)
! Clean map  min=-0.0029917  max=0.19089 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.223 mas, bmaj=11.36 mas, bpa=14.98 degrees
! Estimated noise=0.68625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.174766 Jy
! Component: 100  -  total flux cleaned = 0.257683 Jy
! Component: 150  -  total flux cleaned = 0.309498 Jy
! Component: 200  -  total flux cleaned = 0.346826 Jy
! Total flux subtracted in 200 components = 0.346826 Jy
! Clean residual min=-0.012902 max=0.021353 Jy/beam
! Clean residual mean=-0.000097 rms=0.004448 Jy/beam
! Combined flux in latest and established models = 0.346826 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.346826 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.048 mas, bmaj=12.62 mas, bpa=13.02 degrees
! Estimated noise=0.446611 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.037226 Jy
! Component: 100  -  total flux cleaned = 0.0641234 Jy
! Component: 150  -  total flux cleaned = 0.0855014 Jy
! Component: 200  -  total flux cleaned = 0.102664 Jy
! Total flux subtracted in 200 components = 0.102664 Jy
! Clean residual min=-0.009184 max=0.010775 Jy/beam
! Clean residual mean=-0.000048 rms=0.003103 Jy/beam
! Combined flux in latest and established models = 0.449489 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 85 components and 0.449489 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.4 mas, bmaj=16.94 mas, bpa=4.054 degrees
! Estimated noise=0.509417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019984 Jy
! Component: 100  -  total flux cleaned = 0.0345783 Jy
! Component: 150  -  total flux cleaned = 0.0462707 Jy
! Component: 200  -  total flux cleaned = 0.0559785 Jy
! Total flux subtracted in 200 components = 0.0559785 Jy
! Clean residual min=-0.007360 max=0.007108 Jy/beam
! Clean residual mean=-0.000040 rms=0.002588 Jy/beam
! Combined flux in latest and established models = 0.505468 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00814291 Jy
! Component: 100  -  total flux cleaned = 0.0150419 Jy
! Component: 150  -  total flux cleaned = 0.0209474 Jy
! Component: 200  -  total flux cleaned = 0.0252397 Jy
! Total flux subtracted in 200 components = 0.0252397 Jy
! Clean residual min=-0.005222 max=0.005347 Jy/beam
! Clean residual mean=-0.000029 rms=0.001801 Jy/beam
! Combined flux in latest and established models = 0.530707 Jy
! Adding 117 model components to the UV plane model.
! The established model now contains 196 components and 0.530708 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.048 mas, bmaj=12.62 mas, bpa=13.02 degrees
! Estimated noise=0.446611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00477642 Jy
! Component: 100  -  total flux cleaned = 0.00780248 Jy
! Component: 150  -  total flux cleaned = 0.0100567 Jy
! Component: 200  -  total flux cleaned = 0.0122881 Jy
! Total flux subtracted in 200 components = 0.0122881 Jy
! Clean residual min=-0.003765 max=0.005194 Jy/beam
! Clean residual mean=-0.000021 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.542996 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 223 components and 0.542996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069389Jy  sigma=1.320672
! Fit after  self-cal, rms=0.069302Jy  sigma=1.319076
wmodel /J0425-1612_S_map.mod
! wmodel: Unable to open new model file: /J0425-1612_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0425-1612_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.048 x 12.62 at 13.02 degrees (North through East)
! Clean map  min=-0.0037911  max=0.18936 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0425-1612_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.189355 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00116048 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.83858 1.83858 3.67716 7.35433 14.7087 29.4173 58.8346
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0034 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.189 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  163.169 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0425-1612_S_dfm.log closed on Thu May 19 18:22:48 2016