! Started logfile: /scr/pima/bg219e_uvs/J0420-1501_X_dfm.log on Thu May 19 18:22:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0420-1501_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0420-1501_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.886905 visibilities/baseline/integration-bin.
! Found source: J0420-1501
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10728 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0420-1501_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012789Jy  sigma=22.790206
! Fit after  self-cal, rms=0.840931Jy  sigma=18.858517
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8446 mas, bmaj=2.744 mas, bpa=14.65 degrees
! Estimated noise=0.585814 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118068 Jy
! Component: 100  -  total flux cleaned = 0.150941 Jy
! Total flux subtracted in 100 components = 0.150941 Jy
! Clean residual min=-0.006161 max=0.013852 Jy/beam
! Clean residual mean=-0.000023 rms=0.001679 Jy/beam
! Combined flux in latest and established models = 0.150941 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.150941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069778Jy  sigma=1.507768
! Fit after  self-cal, rms=0.069730Jy  sigma=1.506632
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149025 Jy
! Component: 100  -  total flux cleaned = 0.0229174 Jy
! Total flux subtracted in 100 components = 0.0229174 Jy
! Clean residual min=-0.004225 max=0.008316 Jy/beam
! Clean residual mean=-0.000012 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.173858 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.173858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065338Jy  sigma=1.396869
! Fit after  self-cal, rms=0.065332Jy  sigma=1.396328
! Inverting map 
! Added new window around map position (-1.6, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00762168 Jy
! Component: 100  -  total flux cleaned = 0.0119856 Jy
! Total flux subtracted in 100 components = 0.0119856 Jy
! Clean residual min=-0.003702 max=0.003999 Jy/beam
! Clean residual mean=-0.000006 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.185844 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.185844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064205Jy  sigma=1.368824
! Fit after  self-cal, rms=0.064178Jy  sigma=1.367992
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.046 mas, bmaj=3.081 mas, bpa=12.95 degrees
! Estimated noise=0.340819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00476598 Jy
! Component: 100  -  total flux cleaned = 0.00750449 Jy
! Component: 150  -  total flux cleaned = 0.00936552 Jy
! Component: 200  -  total flux cleaned = 0.0106763 Jy
! Total flux subtracted in 200 components = 0.0106763 Jy
! Clean residual min=-0.002831 max=0.002785 Jy/beam
! Clean residual mean=-0.000003 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.19652 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 67 components and 0.19652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063799Jy  sigma=1.359016
! Fit after  self-cal, rms=0.063788Jy  sigma=1.358569
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.046 x 3.081 at 12.95 degrees (North through East)
! Clean map  min=-0.0025901  max=0.15713 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.02     
!   LA        1.02     NL        0.99     OV        0.99     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        1.01     KP        1.00     
!   LA        0.95     NL        1.05     OV        0.99     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        0.96     
!   LA        0.98     NL        0.99     OV        1.03     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        1.04     KP        1.03     
!   LA        1.00     NL        0.99     OV        1.01     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.97     KP        0.95     
!   LA        0.97     NL        1.01     OV        1.03     PT        1.02     
!   SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.98     KP        0.99     
!   LA        0.96     NL        1.02     OV        1.02     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.01     KP        0.96     
!   LA        0.98     NL        1.03     OV        1.01     PT        1.05     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.96     
!   LA        0.99     NL        1.06     OV        1.00     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.06     KP        1.03     
!   LA        0.98     NL        0.99     OV        1.01     PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.99     KP        0.98     
!   LA        1.01     NL        1.02     OV        1.01     PT        0.98     
!   SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.97     KP        0.97     
!   LA        0.95     NL        1.00     OV        1.03     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.98     KP        0.99     
!   LA        1.02     NL        1.05     OV        1.01     PT        0.99     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.063788Jy  sigma=1.358569
! Fit after  self-cal, rms=0.063264Jy  sigma=1.351171
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=3.086 mas, bpa=12.92 degrees
! Estimated noise=0.339983 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000468032 Jy
! Component: 100  -  total flux cleaned = -0.000561045 Jy
! Component: 150  -  total flux cleaned = -0.000614225 Jy
! Component: 200  -  total flux cleaned = -0.000690513 Jy
! Total flux subtracted in 200 components = -0.000690513 Jy
! Clean residual min=-0.002344 max=0.002104 Jy/beam
! Clean residual mean=0.000001 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.195829 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 83 components and 0.195829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063244Jy  sigma=1.350858
! Fit after  self-cal, rms=0.063239Jy  sigma=1.350732
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063239Jy  sigma=1.350732
! Fit after  self-cal, rms=0.063020Jy  sigma=1.345745
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.047 mas, bmaj=3.092 mas, bpa=12.99 degrees
! Estimated noise=0.339349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000321333 Jy
! Component: 100  -  total flux cleaned = -0.000384586 Jy
! Component: 150  -  total flux cleaned = -0.000448552 Jy
! Component: 200  -  total flux cleaned = -0.000490728 Jy
! Total flux subtracted in 200 components = -0.000490728 Jy
! Clean residual min=-0.002044 max=0.002103 Jy/beam
! Clean residual mean=-0.000001 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.195339 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.195339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063007Jy  sigma=1.345504
! Fit after  self-cal, rms=0.063005Jy  sigma=1.345444
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.2, 21.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169771 Jy
! Component: 100  -  total flux cleaned = 0.002037 Jy
! Component: 150  -  total flux cleaned = 0.00234948 Jy
! Component: 200  -  total flux cleaned = 0.00248065 Jy
! Total flux subtracted in 200 components = 0.00248065 Jy
! Clean residual min=-0.001683 max=0.001499 Jy/beam
! Clean residual mean=-0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.197819 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 130 components and 0.197819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062944Jy  sigma=1.343972
! Fit after  self-cal, rms=0.062942Jy  sigma=1.343891
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062942Jy  sigma=1.343891
! Fit after  self-cal, rms=0.062859Jy  sigma=1.343729
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=3.095 mas, bpa=13.02 degrees
! Estimated noise=0.338595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269722 Jy
! Component: 100  -  total flux cleaned = 0.000297484 Jy
! Component: 150  -  total flux cleaned = 0.000275633 Jy
! Component: 200  -  total flux cleaned = 0.000221001 Jy
! Total flux subtracted in 200 components = 0.000221001 Jy
! Clean residual min=-0.001569 max=0.001398 Jy/beam
! Clean residual mean=-0.000002 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.19804 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 144 components and 0.19804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062844Jy  sigma=1.343367
! Fit after  self-cal, rms=0.062844Jy  sigma=1.343345
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.29497e-05 Jy
! Component: 100  -  total flux cleaned = -1.95354e-05 Jy
! Component: 150  -  total flux cleaned = -7.85192e-05 Jy
! Component: 200  -  total flux cleaned = -9.14329e-05 Jy
! Total flux subtracted in 200 components = -9.14329e-05 Jy
! Clean residual min=-0.001553 max=0.001382 Jy/beam
! Clean residual mean=-0.000002 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.197949 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 156 components and 0.197949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062837Jy  sigma=1.343182
! Fit after  self-cal, rms=0.062837Jy  sigma=1.343174
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062837Jy  sigma=1.343174
! Fit after  self-cal, rms=0.062795Jy  sigma=1.343137
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.251 mas, bmaj=4.218 mas, bpa=0.449 degrees
! Estimated noise=0.400691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00052604 Jy
! Component: 100  -  total flux cleaned = -0.000547783 Jy
! Component: 150  -  total flux cleaned = -0.000480636 Jy
! Component: 200  -  total flux cleaned = -0.000479897 Jy
! Total flux subtracted in 200 components = -0.000479897 Jy
! Clean residual min=-0.001878 max=0.001685 Jy/beam
! Clean residual mean=-0.000004 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.197469 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 170 components and 0.197469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062794Jy  sigma=1.343084
! Fit after  self-cal, rms=0.062794Jy  sigma=1.343055
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113406 Jy
! Component: 100  -  total flux cleaned = -0.000180226 Jy
! Component: 150  -  total flux cleaned = -0.000209881 Jy
! Component: 200  -  total flux cleaned = -0.000237682 Jy
! Total flux subtracted in 200 components = -0.000237682 Jy
! Clean residual min=-0.001878 max=0.001651 Jy/beam
! Clean residual mean=-0.000004 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.197231 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 176 components and 0.197231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062794Jy  sigma=1.343061
! Fit after  self-cal, rms=0.062794Jy  sigma=1.343050
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=3.095 mas, bpa=13.02 degrees
! Estimated noise=0.338347 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.048 x 3.095 at 13.02 degrees (North through East)
! Clean map  min=-0.0014798  max=0.15636 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8447 mas, bmaj=2.755 mas, bpa=14.7 degrees
! Estimated noise=0.581257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117111 Jy
! Component: 100  -  total flux cleaned = 0.14997 Jy
! Component: 150  -  total flux cleaned = 0.165119 Jy
! Component: 200  -  total flux cleaned = 0.174164 Jy
! Total flux subtracted in 200 components = 0.174164 Jy
! Clean residual min=-0.003523 max=0.004713 Jy/beam
! Clean residual mean=-0.000010 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.174164 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.174164 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=3.095 mas, bpa=13.02 degrees
! Estimated noise=0.338347 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00860678 Jy
! Component: 100  -  total flux cleaned = 0.0131504 Jy
! Component: 150  -  total flux cleaned = 0.0156706 Jy
! Component: 200  -  total flux cleaned = 0.0172135 Jy
! Total flux subtracted in 200 components = 0.0172135 Jy
! Clean residual min=-0.002190 max=0.001746 Jy/beam
! Clean residual mean=-0.000005 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.191377 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 50 components and 0.191377 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.251 mas, bmaj=4.218 mas, bpa=0.449 degrees
! Estimated noise=0.400691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001416 Jy
! Component: 100  -  total flux cleaned = 0.00251659 Jy
! Component: 150  -  total flux cleaned = 0.00334382 Jy
! Component: 200  -  total flux cleaned = 0.00380095 Jy
! Total flux subtracted in 200 components = 0.00380095 Jy
! Clean residual min=-0.002072 max=0.001685 Jy/beam
! Clean residual mean=-0.000006 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.195178 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000371675 Jy
! Component: 100  -  total flux cleaned = 0.000704162 Jy
! Component: 150  -  total flux cleaned = 0.000964158 Jy
! Component: 200  -  total flux cleaned = 0.00107773 Jy
! Total flux subtracted in 200 components = 0.00107773 Jy
! Clean residual min=-0.001934 max=0.001657 Jy/beam
! Clean residual mean=-0.000005 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.196256 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 101 components and 0.196256 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=3.095 mas, bpa=13.02 degrees
! Estimated noise=0.338347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000379185 Jy
! Component: 100  -  total flux cleaned = -0.00034219 Jy
! Component: 150  -  total flux cleaned = -0.000370808 Jy
! Component: 200  -  total flux cleaned = -0.000322684 Jy
! Total flux subtracted in 200 components = -0.000322684 Jy
! Clean residual min=-0.001633 max=0.001485 Jy/beam
! Clean residual mean=-0.000003 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.195933 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 122 components and 0.195933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062826Jy  sigma=1.343624
! Fit after  self-cal, rms=0.062818Jy  sigma=1.343501
wmodel /J0420-1501_X_map.mod
! wmodel: Unable to open new model file: /J0420-1501_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0420-1501_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.048 x 3.095 at 13.02 degrees (North through East)
! Clean map  min=-0.0016837  max=0.15657 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0420-1501_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.156568 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000405724 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.777407 0.777407 1.55481 3.10963 6.21926 12.4385 24.877 49.7541 99.5081
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.156 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  385.898 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0420-1501_X_dfm.log closed on Thu May 19 18:22:44 2016