! Started logfile: /scr/pima/bg219e_uvs/J0403-3605_X_uvs.log on Thu Apr 7 08:58:29 2016 obs /scr/pima/bg219e_uvs/J0403-3605_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0403-3605_X_uva.fits ! AN table 1: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.790741 visibilities/baseline/integration-bin. ! Found source: J0403-3605 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5124 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0403-3605_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.723297Jy sigma=23.152126 ! Fit after self-cal, rms=0.531325Jy sigma=7.359894 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7921 mas, bmaj=4.39 mas, bpa=13.27 degrees ! Estimated noise=1.38401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.06878 Jy ! Component: 100 - total flux cleaned = 1.38806 Jy ! Total flux subtracted in 100 components = 1.38806 Jy ! Clean residual min=-0.060380 max=0.140727 Jy/beam ! Clean residual mean=0.000143 rms=0.019702 Jy/beam ! Combined flux in latest and established models = 1.38806 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.38806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.293112Jy sigma=3.863212 ! Fit after self-cal, rms=0.293052Jy sigma=3.862599 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151433 Jy ! Component: 100 - total flux cleaned = 0.231214 Jy ! Total flux subtracted in 100 components = 0.231214 Jy ! Clean residual min=-0.048719 max=0.057078 Jy/beam ! Clean residual mean=0.000037 rms=0.012170 Jy/beam ! Combined flux in latest and established models = 1.61927 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 1.61927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.208219Jy sigma=2.510648 ! Fit after self-cal, rms=0.208128Jy sigma=2.509783 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=4.892 mas, bpa=11.64 degrees ! Estimated noise=1.01647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0536177 Jy ! Component: 100 - total flux cleaned = 0.0836981 Jy ! Component: 150 - total flux cleaned = 0.0885842 Jy ! Component: 200 - total flux cleaned = 0.0905701 Jy ! Total flux subtracted in 200 components = 0.0905701 Jy ! Clean residual min=-0.041807 max=0.039686 Jy/beam ! Clean residual mean=-0.000026 rms=0.011861 Jy/beam ! Combined flux in latest and established models = 1.70984 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 1.70984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.193767Jy sigma=2.266700 ! Fit after self-cal, rms=0.193739Jy sigma=2.266582 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.002 x 4.892 at 11.64 degrees (North through East) ! Clean map min=-0.040419 max=1.2399 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.12 KP 0.99 ! LA 1.01 NL 1.10 OV 0.94 PT 0.99 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.08 KP 0.99 ! LA 1.01 NL 1.11 OV 0.95 PT 0.99 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.11 KP 0.97 ! LA 0.98 NL 1.11 OV 0.96 PT 0.97 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.10 KP 0.98 ! LA 1.00 NL 1.12 OV 0.94 PT 0.98 ! SC 1.00 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.05 KP 0.95 ! LA 1.00 NL 1.10 OV 0.93 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.07 KP 0.96 ! LA 0.99 NL 1.09 OV 0.93 PT 1.03 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.08 KP 0.98 ! LA 1.01 NL 1.11 OV 0.92 PT 0.99 ! SC 1.00 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.193739Jy sigma=2.266582 ! Fit after self-cal, rms=0.170317Jy sigma=1.880830 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9999 mas, bmaj=4.983 mas, bpa=11.84 degrees ! Estimated noise=1.02492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0343817 Jy ! Component: 100 - total flux cleaned = -0.0403186 Jy ! Component: 150 - total flux cleaned = -0.0397837 Jy ! Component: 200 - total flux cleaned = -0.0401944 Jy ! Total flux subtracted in 200 components = -0.0401944 Jy ! Clean residual min=-0.034508 max=0.031110 Jy/beam ! Clean residual mean=-0.000056 rms=0.008316 Jy/beam ! Combined flux in latest and established models = 1.66965 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 1.66965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.161782Jy sigma=1.780698 ! Fit after self-cal, rms=0.161865Jy sigma=1.780510 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.161865Jy sigma=1.780510 ! Fit after self-cal, rms=0.158532Jy sigma=1.744710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=5.019 mas, bpa=11.89 degrees ! Estimated noise=1.02238 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0208826 Jy ! Component: 100 - total flux cleaned = -0.0251831 Jy ! Component: 150 - total flux cleaned = -0.0255663 Jy ! Component: 200 - total flux cleaned = -0.0262581 Jy ! Total flux subtracted in 200 components = -0.0262581 Jy ! Clean residual min=-0.032586 max=0.028119 Jy/beam ! Clean residual mean=-0.000064 rms=0.007609 Jy/beam ! Combined flux in latest and established models = 1.64339 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 1.64339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.154822Jy sigma=1.700739 ! Fit after self-cal, rms=0.154855Jy sigma=1.700675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000625442 Jy ! Component: 100 - total flux cleaned = -0.00117698 Jy ! Component: 150 - total flux cleaned = -0.00143024 Jy ! Component: 200 - total flux cleaned = -0.0018993 Jy ! Total flux subtracted in 200 components = -0.0018993 Jy ! Clean residual min=-0.032177 max=0.027360 Jy/beam ! Clean residual mean=-0.000063 rms=0.007567 Jy/beam ! Combined flux in latest and established models = 1.64149 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 1.64149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.154133Jy sigma=1.687819 ! Fit after self-cal, rms=0.154134Jy sigma=1.687796 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.154134Jy sigma=1.687796 ! Fit after self-cal, rms=0.145134Jy sigma=1.552939 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.004 mas, bmaj=5.037 mas, bpa=11.95 degrees ! Estimated noise=1.02609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0135997 Jy ! Component: 100 - total flux cleaned = -0.0158737 Jy ! Component: 150 - total flux cleaned = -0.0180688 Jy ! Component: 200 - total flux cleaned = -0.0198157 Jy ! Total flux subtracted in 200 components = -0.0198157 Jy ! Clean residual min=-0.027798 max=0.017999 Jy/beam ! Clean residual mean=-0.000083 rms=0.005965 Jy/beam ! Combined flux in latest and established models = 1.62167 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 1.62167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.142799Jy sigma=1.512062 ! Fit after self-cal, rms=0.142878Jy sigma=1.511987 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143446 Jy ! Component: 100 - total flux cleaned = -0.00256764 Jy ! Component: 150 - total flux cleaned = -0.00347846 Jy ! Component: 200 - total flux cleaned = -0.00410223 Jy ! Total flux subtracted in 200 components = -0.00410223 Jy ! Clean residual min=-0.026759 max=0.017953 Jy/beam ! Clean residual mean=-0.000081 rms=0.005916 Jy/beam ! Combined flux in latest and established models = 1.61757 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 1.61757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.142707Jy sigma=1.504110 ! Fit after self-cal, rms=0.142712Jy sigma=1.504090 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.142712Jy sigma=1.504090 ! Fit after self-cal, rms=0.141755Jy sigma=1.479269 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=8.158 mas, bpa=1.73 degrees ! Estimated noise=1.2121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0141602 Jy ! Component: 100 - total flux cleaned = -0.0174681 Jy ! Component: 150 - total flux cleaned = -0.0180995 Jy ! Component: 200 - total flux cleaned = -0.018855 Jy ! Total flux subtracted in 200 components = -0.018855 Jy ! Clean residual min=-0.026379 max=0.022196 Jy/beam ! Clean residual mean=-0.000128 rms=0.007272 Jy/beam ! Combined flux in latest and established models = 1.59871 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 1.59871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.140230Jy sigma=1.454877 ! Fit after self-cal, rms=0.140255Jy sigma=1.454768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172836 Jy ! Component: 100 - total flux cleaned = -0.000490439 Jy ! Component: 150 - total flux cleaned = -0.00063613 Jy ! Component: 200 - total flux cleaned = -0.00077414 Jy ! Total flux subtracted in 200 components = -0.00077414 Jy ! Clean residual min=-0.025819 max=0.021818 Jy/beam ! Clean residual mean=-0.000128 rms=0.007194 Jy/beam ! Combined flux in latest and established models = 1.59794 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 1.59794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.140247Jy sigma=1.448556 ! Fit after self-cal, rms=0.140251Jy sigma=1.448472 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.006 mas, bmaj=5.067 mas, bpa=12.06 degrees ! Estimated noise=1.02914 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.006 x 5.067 at 12.06 degrees (North through East) ! Clean map min=-0.023213 max=1.2688 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.140251Jy sigma=1.448472 ! Fit after self-cal, rms=0.133787Jy sigma=1.334630 ! Inverting map and beam ! Estimated beam: bmin=1.007 mas, bmaj=5.084 mas, bpa=12.13 degrees ! Estimated noise=1.02512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0123947 Jy ! Component: 100 - total flux cleaned = -0.015427 Jy ! Component: 150 - total flux cleaned = -0.0164691 Jy ! Component: 200 - total flux cleaned = -0.0174869 Jy ! Total flux subtracted in 200 components = -0.0174869 Jy ! Clean residual min=-0.021598 max=0.015509 Jy/beam ! Clean residual mean=-0.000073 rms=0.005036 Jy/beam ! Combined flux in latest and established models = 1.58045 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 1.58045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.132687Jy sigma=1.313318 ! Fit after self-cal, rms=0.132695Jy sigma=1.313305 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000703923 Jy ! Component: 100 - total flux cleaned = -0.00153054 Jy ! Component: 150 - total flux cleaned = -0.00214022 Jy ! Component: 200 - total flux cleaned = -0.00259167 Jy ! Total flux subtracted in 200 components = -0.00259167 Jy ! Clean residual min=-0.021072 max=0.015585 Jy/beam ! Clean residual mean=-0.000072 rms=0.005016 Jy/beam ! Combined flux in latest and established models = 1.57786 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 1.57786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.132626Jy sigma=1.309944 ! Fit after self-cal, rms=0.132625Jy sigma=1.309935 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.132625Jy sigma=1.309935 ! Fit after self-cal, rms=0.131993Jy sigma=1.296132 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7817 mas, bmaj=4.588 mas, bpa=13.68 degrees ! Estimated noise=1.41474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.09245 Jy ! Component: 100 - total flux cleaned = 1.35873 Jy ! Component: 150 - total flux cleaned = 1.4702 Jy ! Component: 200 - total flux cleaned = 1.52086 Jy ! Total flux subtracted in 200 components = 1.52086 Jy ! Clean residual min=-0.025475 max=0.028292 Jy/beam ! Clean residual mean=-0.000013 rms=0.005818 Jy/beam ! Combined flux in latest and established models = 1.52086 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.52086 Jy ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=5.104 mas, bpa=12.19 degrees ! Estimated noise=1.02393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175635 Jy ! Component: 100 - total flux cleaned = 0.0202955 Jy ! Component: 150 - total flux cleaned = 0.0218909 Jy ! Component: 200 - total flux cleaned = 0.0232128 Jy ! Total flux subtracted in 200 components = 0.0232128 Jy ! Clean residual min=-0.023247 max=0.017950 Jy/beam ! Clean residual mean=-0.000060 rms=0.004962 Jy/beam ! Combined flux in latest and established models = 1.54407 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 1.54407 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.247 mas, bmaj=8.24 mas, bpa=1.651 degrees ! Estimated noise=1.19776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615556 Jy ! Component: 100 - total flux cleaned = 0.00683539 Jy ! Component: 150 - total flux cleaned = 0.00747618 Jy ! Component: 200 - total flux cleaned = 0.00806746 Jy ! Total flux subtracted in 200 components = 0.00806746 Jy ! Clean residual min=-0.023603 max=0.020352 Jy/beam ! Clean residual mean=-0.000113 rms=0.006514 Jy/beam ! Combined flux in latest and established models = 1.55214 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000555501 Jy ! Component: 100 - total flux cleaned = 0.000945168 Jy ! Component: 150 - total flux cleaned = 0.00132371 Jy ! Component: 200 - total flux cleaned = 0.00156551 Jy ! Total flux subtracted in 200 components = 0.00156551 Jy ! Clean residual min=-0.023508 max=0.020196 Jy/beam ! Clean residual mean=-0.000114 rms=0.006470 Jy/beam ! Combined flux in latest and established models = 1.55371 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 1.55371 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.008 mas, bmaj=5.104 mas, bpa=12.19 degrees ! Estimated noise=1.02393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00486792 Jy ! Component: 100 - total flux cleaned = -0.00407151 Jy ! Component: 150 - total flux cleaned = -0.00339394 Jy ! Component: 200 - total flux cleaned = -0.00279975 Jy ! Total flux subtracted in 200 components = -0.00279975 Jy ! Clean residual min=-0.021777 max=0.016256 Jy/beam ! Clean residual mean=-0.000063 rms=0.004819 Jy/beam ! Combined flux in latest and established models = 1.55091 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 1.55091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.132339Jy sigma=1.293370 ! Fit after self-cal, rms=0.132358Jy sigma=1.293140 wmodel /scr/pima/bg219e_uvs/J0403-3605_X_map.mod ! Writing 48 model components to file: /scr/pima/bg219e_uvs/J0403-3605_X_map.mod wobs /scr/pima/bg219e_uvs/J0403-3605_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J0403-3605_X_uvs.fits wwins /scr/pima/bg219e_uvs/J0403-3605_X_map.win ! wwins: Wrote 1 windows to /scr/pima/bg219e_uvs/J0403-3605_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00943938 Jy ! Component: 100 - total flux cleaned = -0.0175786 Jy ! Component: 150 - total flux cleaned = -0.0250902 Jy ! Component: 200 - total flux cleaned = -0.0317943 Jy ! Component: 250 - total flux cleaned = -0.0362554 Jy ! Component: 300 - total flux cleaned = -0.0409781 Jy ! Component: 350 - total flux cleaned = -0.0440625 Jy ! Component: 400 - total flux cleaned = -0.0468015 Jy ! Component: 450 - total flux cleaned = -0.0500835 Jy ! Component: 500 - total flux cleaned = -0.0528267 Jy ! Component: 550 - total flux cleaned = -0.0554812 Jy ! Component: 600 - total flux cleaned = -0.0584454 Jy ! Component: 650 - total flux cleaned = -0.0609291 Jy ! Component: 700 - total flux cleaned = -0.063701 Jy ! Component: 750 - total flux cleaned = -0.066029 Jy ! Component: 800 - total flux cleaned = -0.0682881 Jy ! Component: 850 - total flux cleaned = -0.0704861 Jy ! Component: 900 - total flux cleaned = -0.0726165 Jy ! Component: 950 - total flux cleaned = -0.0743685 Jy ! Component: 1000 - total flux cleaned = -0.0762401 Jy ! Component: 1050 - total flux cleaned = -0.0776108 Jy ! Component: 1100 - total flux cleaned = -0.0788019 Jy ! Component: 1150 - total flux cleaned = -0.0802478 Jy ! Component: 1200 - total flux cleaned = -0.0816515 Jy ! Component: 1250 - total flux cleaned = -0.0827501 Jy ! Component: 1300 - total flux cleaned = -0.0836876 Jy ! Component: 1350 - total flux cleaned = -0.0847382 Jy ! Component: 1400 - total flux cleaned = -0.0856348 Jy ! Component: 1450 - total flux cleaned = -0.086387 Jy ! Component: 1500 - total flux cleaned = -0.0874927 Jy ! Component: 1550 - total flux cleaned = -0.0884523 Jy ! Component: 1600 - total flux cleaned = -0.0889248 Jy ! Component: 1650 - total flux cleaned = -0.0903089 Jy ! Component: 1700 - total flux cleaned = -0.0913242 Jy ! Component: 1750 - total flux cleaned = -0.0922072 Jy ! Component: 1800 - total flux cleaned = -0.0930727 Jy ! Component: 1850 - total flux cleaned = -0.0939247 Jy ! Component: 1900 - total flux cleaned = -0.0948611 Jy ! Component: 1950 - total flux cleaned = -0.0957811 Jy ! Component: 2000 - total flux cleaned = -0.0962821 Jy ! Component: 2050 - total flux cleaned = -0.0970716 Jy ! Component: 2100 - total flux cleaned = -0.09775 Jy ! Component: 2150 - total flux cleaned = -0.0983218 Jy ! Component: 2200 - total flux cleaned = -0.0987942 Jy ! Component: 2250 - total flux cleaned = -0.0995324 Jy ! Component: 2300 - total flux cleaned = -0.0999872 Jy ! Component: 2350 - total flux cleaned = -0.100347 Jy ! Component: 2400 - total flux cleaned = -0.101228 Jy ! Component: 2450 - total flux cleaned = -0.101921 Jy ! Component: 2500 - total flux cleaned = -0.102176 Jy ! Component: 2550 - total flux cleaned = -0.102764 Jy ! Component: 2600 - total flux cleaned = -0.103096 Jy ! Component: 2650 - total flux cleaned = -0.103504 Jy ! Component: 2700 - total flux cleaned = -0.104068 Jy ! Component: 2750 - total flux cleaned = -0.104544 Jy ! Component: 2800 - total flux cleaned = -0.104933 Jy ! Component: 2850 - total flux cleaned = -0.105242 Jy ! Component: 2900 - total flux cleaned = -0.105775 Jy ! Component: 2950 - total flux cleaned = -0.106149 Jy ! Component: 3000 - total flux cleaned = -0.106298 Jy ! Component: 3050 - total flux cleaned = -0.106591 Jy ! Component: 3100 - total flux cleaned = -0.106951 Jy ! Component: 3150 - total flux cleaned = -0.107237 Jy ! Component: 3200 - total flux cleaned = -0.10759 Jy ! Component: 3250 - total flux cleaned = -0.108075 Jy ! Component: 3300 - total flux cleaned = -0.108417 Jy ! Component: 3350 - total flux cleaned = -0.108824 Jy ! Component: 3400 - total flux cleaned = -0.109025 Jy ! Component: 3450 - total flux cleaned = -0.109423 Jy ! Component: 3500 - total flux cleaned = -0.109619 Jy ! Component: 3550 - total flux cleaned = -0.110072 Jy ! Component: 3600 - total flux cleaned = -0.110135 Jy ! Component: 3650 - total flux cleaned = -0.110452 Jy ! Component: 3700 - total flux cleaned = -0.110701 Jy ! Component: 3750 - total flux cleaned = -0.110948 Jy ! Component: 3800 - total flux cleaned = -0.110886 Jy ! Component: 3850 - total flux cleaned = -0.111189 Jy ! Component: 3900 - total flux cleaned = -0.111309 Jy ! Component: 3950 - total flux cleaned = -0.111546 Jy ! Component: 4000 - total flux cleaned = -0.111662 Jy ! Component: 4050 - total flux cleaned = -0.111721 Jy ! Total flux subtracted in 4096 components = -0.111951 Jy ! Clean residual min=-0.002965 max=0.002995 Jy/beam ! Clean residual mean=-0.000013 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 1.43895 Jy keep ! Adding 437 model components to the UV plane model. ! The established model now contains 485 components and 1.43895 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J0403-3605_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.008 x 5.104 at 12.19 degrees (North through East) ! Clean map min=-0.012104 max=1.2852 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0403-3605_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.28518 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00114544 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.267379 0.267379 0.534759 1.06952 2.13904 4.27807 8.55614 17.1123 34.2246 68.4491 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.285 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1122 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0403-3605_X_uvs.log closed on Thu Apr 7 08:58:33 2016