! Started logfile: /scr/pima/bg219e_uvs/J0401-1606_S_uvs.log on Thu Apr  7 06:35:09 2016
obs /scr/pima/bg219e_uvs/J0401-1606_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0401-1606_S_uva.fits
! AN table 1: 41 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.903117 visibilities/baseline/integration-bin.
! Found source: J0401-1606
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5332 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0401-1606_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019827Jy  sigma=20.384148
! Fit after  self-cal, rms=0.848866Jy  sigma=17.037190
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.392 mas, bmaj=10.79 mas, bpa=13.57 degrees
! Estimated noise=0.729529 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1191 Jy
! Component: 100  -  total flux cleaned = 0.145072 Jy
! Total flux subtracted in 100 components = 0.145072 Jy
! Clean residual min=-0.004871 max=0.007244 Jy/beam
! Clean residual mean=-0.000012 rms=0.001216 Jy/beam
! Combined flux in latest and established models = 0.145072 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.145072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071564Jy  sigma=1.367831
! Fit after  self-cal, rms=0.071561Jy  sigma=1.367762
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.991 mas, bmaj=12.04 mas, bpa=12.87 degrees
! Estimated noise=0.503039 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645638 Jy
! Component: 100  -  total flux cleaned = 0.00930997 Jy
! Component: 150  -  total flux cleaned = 0.0110841 Jy
! Component: 200  -  total flux cleaned = 0.0122387 Jy
! Total flux subtracted in 200 components = 0.0122387 Jy
! Clean residual min=-0.003702 max=0.004300 Jy/beam
! Clean residual mean=-0.000001 rms=0.000980 Jy/beam
! Combined flux in latest and established models = 0.157311 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.157311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070911Jy  sigma=1.358593
! Fit after  self-cal, rms=0.070913Jy  sigma=1.358536
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.991 x 12.04 at 12.87 degrees (North through East)
! Clean map  min=-0.0035816  max=0.15168 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        1.01     KP        1.01     
!   LA        1.02     NL        1.03     OV        1.00     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        0.98     KP        0.99     
!   LA        1.04     NL        0.96     OV        0.98     PT        1.02     
!   SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.98     NL        0.93     OV        0.94     PT        0.97     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.070913Jy  sigma=1.358536
! Fit after  self-cal, rms=0.069786Jy  sigma=1.353082
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.997 mas, bmaj=12.05 mas, bpa=12.84 degrees
! Estimated noise=0.497533 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000823682 Jy
! Component: 100  -  total flux cleaned = -0.000825041 Jy
! Component: 150  -  total flux cleaned = -0.000768826 Jy
! Component: 200  -  total flux cleaned = -0.000690908 Jy
! Total flux subtracted in 200 components = -0.000690908 Jy
! Clean residual min=-0.003415 max=0.003792 Jy/beam
! Clean residual mean=-0.000005 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.15662 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.15662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069771Jy  sigma=1.352080
! Fit after  self-cal, rms=0.069779Jy  sigma=1.352009
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069779Jy  sigma=1.352009
! Fit after  self-cal, rms=0.068928Jy  sigma=1.363643
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=12.09 mas, bpa=12.91 degrees
! Estimated noise=0.490044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00189512 Jy
! Component: 100  -  total flux cleaned = -0.00189254 Jy
! Component: 150  -  total flux cleaned = -0.00193171 Jy
! Component: 200  -  total flux cleaned = -0.00189843 Jy
! Total flux subtracted in 200 components = -0.00189843 Jy
! Clean residual min=-0.003265 max=0.003849 Jy/beam
! Clean residual mean=0.000000 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.154721 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 45 components and 0.154721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068892Jy  sigma=1.360307
! Fit after  self-cal, rms=0.068906Jy  sigma=1.360225
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-94, -82.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218513 Jy
! Component: 100  -  total flux cleaned = 0.0015862 Jy
! Component: 150  -  total flux cleaned = 0.00115298 Jy
! Component: 200  -  total flux cleaned = 0.000947297 Jy
! Total flux subtracted in 200 components = 0.000947297 Jy
! Clean residual min=-0.003004 max=0.003000 Jy/beam
! Clean residual mean=0.000003 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.155669 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 68 components and 0.155669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068811Jy  sigma=1.353325
! Fit after  self-cal, rms=0.068796Jy  sigma=1.353112
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068796Jy  sigma=1.353112
! Fit after  self-cal, rms=0.067883Jy  sigma=1.352003
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.01 mas, bmaj=12.11 mas, bpa=12.96 degrees
! Estimated noise=0.483762 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00063041 Jy
! Component: 100  -  total flux cleaned = -0.00100272 Jy
! Component: 150  -  total flux cleaned = -0.00118165 Jy
! Component: 200  -  total flux cleaned = -0.00137593 Jy
! Total flux subtracted in 200 components = -0.00137593 Jy
! Clean residual min=-0.002951 max=0.003028 Jy/beam
! Clean residual mean=0.000004 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.154293 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 84 components and 0.154293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067849Jy  sigma=1.348468
! Fit after  self-cal, rms=0.067849Jy  sigma=1.348421
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.07105e-06 Jy
! Component: 100  -  total flux cleaned = -5.93759e-05 Jy
! Component: 150  -  total flux cleaned = -9.01407e-05 Jy
! Component: 200  -  total flux cleaned = -0.000119917 Jy
! Total flux subtracted in 200 components = -0.000119917 Jy
! Clean residual min=-0.002968 max=0.002950 Jy/beam
! Clean residual mean=0.000003 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.154173 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 96 components and 0.154173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067835Jy  sigma=1.347408
! Fit after  self-cal, rms=0.067834Jy  sigma=1.347393
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067834Jy  sigma=1.347393
! Fit after  self-cal, rms=0.067171Jy  sigma=1.346838
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.955 mas, bmaj=16.05 mas, bpa=3.605 degrees
! Estimated noise=0.551959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00146251 Jy
! Component: 100  -  total flux cleaned = -0.00150804 Jy
! Component: 150  -  total flux cleaned = -0.00158369 Jy
! Component: 200  -  total flux cleaned = -0.00158265 Jy
! Total flux subtracted in 200 components = -0.00158265 Jy
! Clean residual min=-0.002590 max=0.003189 Jy/beam
! Clean residual mean=0.000007 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.15259 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 125 components and 0.15259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067169Jy  sigma=1.345160
! Fit after  self-cal, rms=0.067167Jy  sigma=1.345119
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.39976e-05 Jy
! Component: 100  -  total flux cleaned = 4.38066e-05 Jy
! Component: 150  -  total flux cleaned = 4.3846e-05 Jy
! Component: 200  -  total flux cleaned = 7.02775e-05 Jy
! Total flux subtracted in 200 components = 7.02775e-05 Jy
! Clean residual min=-0.002487 max=0.003088 Jy/beam
! Clean residual mean=0.000007 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.15266 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 143 components and 0.15266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067172Jy  sigma=1.344693
! Fit after  self-cal, rms=0.067169Jy  sigma=1.344664
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.014 mas, bmaj=12.13 mas, bpa=12.99 degrees
! Estimated noise=0.478972 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.014 x 12.13 at 12.99 degrees (North through East)
! Clean map  min=-0.0028986  max=0.14433 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=10.86 mas, bpa=13.71 degrees
! Estimated noise=0.695648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113519 Jy
! Component: 100  -  total flux cleaned = 0.1383 Jy
! Component: 150  -  total flux cleaned = 0.145145 Jy
! Component: 200  -  total flux cleaned = 0.147039 Jy
! Total flux subtracted in 200 components = 0.147039 Jy
! Clean residual min=-0.003973 max=0.004200 Jy/beam
! Clean residual mean=-0.000001 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.147039 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.147039 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.014 mas, bmaj=12.13 mas, bpa=12.99 degrees
! Estimated noise=0.478972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38.5, -51.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00459098 Jy
! Component: 100  -  total flux cleaned = 0.00613904 Jy
! Component: 150  -  total flux cleaned = 0.00623501 Jy
! Component: 200  -  total flux cleaned = 0.00623471 Jy
! Total flux subtracted in 200 components = 0.00623471 Jy
! Clean residual min=-0.002947 max=0.003407 Jy/beam
! Clean residual mean=0.000002 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.153273 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 45 components and 0.153273 Jy
! Inverting map 
! Added new window around map position (-45, 51).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220095 Jy
! Component: 100  -  total flux cleaned = 0.00214008 Jy
! Component: 150  -  total flux cleaned = 0.00214127 Jy
! Component: 200  -  total flux cleaned = 0.0022569 Jy
! Total flux subtracted in 200 components = 0.0022569 Jy
! Clean residual min=-0.002745 max=0.002404 Jy/beam
! Clean residual mean=0.000004 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.15553 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 84 components and 0.15553 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.955 mas, bmaj=16.05 mas, bpa=3.605 degrees
! Estimated noise=0.551959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249388 Jy
! Component: 100  -  total flux cleaned = 0.000248679 Jy
! Component: 150  -  total flux cleaned = 0.000205747 Jy
! Component: 200  -  total flux cleaned = 0.000129863 Jy
! Total flux subtracted in 200 components = 0.000129863 Jy
! Clean residual min=-0.002285 max=0.002485 Jy/beam
! Clean residual mean=0.000007 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.15566 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.63696e-07 Jy
! Component: 100  -  total flux cleaned = -3.16057e-05 Jy
! Component: 150  -  total flux cleaned = -3.13005e-05 Jy
! Component: 200  -  total flux cleaned = -3.11247e-05 Jy
! Total flux subtracted in 200 components = -3.11247e-05 Jy
! Clean residual min=-0.002265 max=0.002429 Jy/beam
! Clean residual mean=0.000007 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.155629 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 138 components and 0.155629 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.014 mas, bmaj=12.13 mas, bpa=12.99 degrees
! Estimated noise=0.478972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.60486e-05 Jy
! Component: 100  -  total flux cleaned = -6.77631e-05 Jy
! Component: 150  -  total flux cleaned = -6.69461e-05 Jy
! Component: 200  -  total flux cleaned = -6.8187e-05 Jy
! Total flux subtracted in 200 components = -6.8187e-05 Jy
! Clean residual min=-0.002600 max=0.002170 Jy/beam
! Clean residual mean=0.000004 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.155561 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 156 components and 0.155561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066981Jy  sigma=1.335570
! Fit after  self-cal, rms=0.066961Jy  sigma=1.335115
wmodel /scr/pima/bg219e_uvs/J0401-1606_S_map.mod
! Writing 156 model components to file: /scr/pima/bg219e_uvs/J0401-1606_S_map.mod
wobs /scr/pima/bg219e_uvs/J0401-1606_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0401-1606_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J0401-1606_S_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J0401-1606_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000928607 Jy
! Component: 100  -  total flux cleaned = -0.00145655 Jy
! Component: 150  -  total flux cleaned = -0.00191585 Jy
! Component: 200  -  total flux cleaned = -0.00227845 Jy
! Component: 250  -  total flux cleaned = -0.00248809 Jy
! Component: 300  -  total flux cleaned = -0.00272281 Jy
! Component: 350  -  total flux cleaned = -0.00298113 Jy
! Component: 400  -  total flux cleaned = -0.00313857 Jy
! Component: 450  -  total flux cleaned = -0.00329218 Jy
! Component: 500  -  total flux cleaned = -0.00338127 Jy
! Component: 550  -  total flux cleaned = -0.00341029 Jy
! Component: 600  -  total flux cleaned = -0.00349549 Jy
! Component: 650  -  total flux cleaned = -0.0036066 Jy
! Component: 700  -  total flux cleaned = -0.00371587 Jy
! Component: 750  -  total flux cleaned = -0.00382315 Jy
! Component: 800  -  total flux cleaned = -0.00382311 Jy
! Component: 850  -  total flux cleaned = -0.00384895 Jy
! Component: 900  -  total flux cleaned = -0.00395058 Jy
! Component: 950  -  total flux cleaned = -0.00395054 Jy
! Component: 1000  -  total flux cleaned = -0.00399972 Jy
! Component: 1050  -  total flux cleaned = -0.00402431 Jy
! Component: 1100  -  total flux cleaned = -0.00407202 Jy
! Component: 1150  -  total flux cleaned = -0.00409591 Jy
! Component: 1200  -  total flux cleaned = -0.00416558 Jy
! Component: 1250  -  total flux cleaned = -0.00425688 Jy
! Component: 1300  -  total flux cleaned = -0.00423412 Jy
! Component: 1350  -  total flux cleaned = -0.00430091 Jy
! Component: 1400  -  total flux cleaned = -0.0042565 Jy
! Component: 1450  -  total flux cleaned = -0.00427796 Jy
! Component: 1500  -  total flux cleaned = -0.00425623 Jy
! Component: 1550  -  total flux cleaned = -0.00427751 Jy
! Component: 1600  -  total flux cleaned = -0.0042356 Jy
! Component: 1650  -  total flux cleaned = -0.00421507 Jy
! Component: 1700  -  total flux cleaned = -0.00431809 Jy
! Component: 1750  -  total flux cleaned = -0.00427719 Jy
! Component: 1800  -  total flux cleaned = -0.00433746 Jy
! Component: 1850  -  total flux cleaned = -0.00429729 Jy
! Component: 1900  -  total flux cleaned = -0.0042577 Jy
! Component: 1950  -  total flux cleaned = -0.00423866 Jy
! Component: 2000  -  total flux cleaned = -0.00423872 Jy
! Component: 2050  -  total flux cleaned = -0.00418146 Jy
! Component: 2100  -  total flux cleaned = -0.00418147 Jy
! Component: 2150  -  total flux cleaned = -0.00414418 Jy
! Component: 2200  -  total flux cleaned = -0.00418123 Jy
! Component: 2250  -  total flux cleaned = -0.00412577 Jy
! Component: 2300  -  total flux cleaned = -0.00403463 Jy
! Component: 2350  -  total flux cleaned = -0.00407101 Jy
! Component: 2400  -  total flux cleaned = -0.00403493 Jy
! Component: 2450  -  total flux cleaned = -0.00403461 Jy
! Component: 2500  -  total flux cleaned = -0.004017 Jy
! Component: 2550  -  total flux cleaned = -0.0038771 Jy
! Component: 2600  -  total flux cleaned = -0.00384244 Jy
! Component: 2650  -  total flux cleaned = -0.00380808 Jy
! Component: 2700  -  total flux cleaned = -0.00375699 Jy
! Component: 2750  -  total flux cleaned = -0.0036893 Jy
! Component: 2800  -  total flux cleaned = -0.00363882 Jy
! Component: 2850  -  total flux cleaned = -0.00357197 Jy
! Component: 2900  -  total flux cleaned = -0.00352244 Jy
! Component: 2950  -  total flux cleaned = -0.00344014 Jy
! Component: 3000  -  total flux cleaned = -0.00337506 Jy
! Component: 3050  -  total flux cleaned = -0.00334268 Jy
! Component: 3100  -  total flux cleaned = -0.00326219 Jy
! Component: 3150  -  total flux cleaned = -0.00321427 Jy
! Component: 3200  -  total flux cleaned = -0.00318254 Jy
! Component: 3250  -  total flux cleaned = -0.00315092 Jy
! Component: 3300  -  total flux cleaned = -0.00308843 Jy
! Component: 3350  -  total flux cleaned = -0.00301068 Jy
! Component: 3400  -  total flux cleaned = -0.00297981 Jy
! Component: 3450  -  total flux cleaned = -0.00291837 Jy
! Component: 3500  -  total flux cleaned = -0.00284193 Jy
! Component: 3550  -  total flux cleaned = -0.00279631 Jy
! Component: 3600  -  total flux cleaned = -0.00267574 Jy
! Component: 3650  -  total flux cleaned = -0.00257087 Jy
! Component: 3700  -  total flux cleaned = -0.00252608 Jy
! Component: 3750  -  total flux cleaned = -0.00249647 Jy
! Component: 3800  -  total flux cleaned = -0.00237875 Jy
! Component: 3850  -  total flux cleaned = -0.00229094 Jy
! Component: 3900  -  total flux cleaned = -0.00226178 Jy
! Component: 3950  -  total flux cleaned = -0.00217473 Jy
! Component: 4000  -  total flux cleaned = -0.00208835 Jy
! Component: 4050  -  total flux cleaned = -0.00201681 Jy
! Total flux subtracted in 4096 components = -0.00195991 Jy
! Clean residual min=-0.000884 max=0.000751 Jy/beam
! Clean residual mean=0.000001 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.153601 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 437 components and 0.153601 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0401-1606_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.014 x 12.13 at 12.99 degrees (North through East)
! Clean map  min=-0.0021558  max=0.14346 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0401-1606_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.143464 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000261628 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.547094 0.547094 1.09419 2.18838 4.37675 8.7535 17.507 35.014 70.028
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.143 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  548.352 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0401-1606_S_uvs.log closed on Thu Apr  7 06:35:13 2016