! Started logfile: /scr/pima/bg219e_uvs/J0401-1606_S_dfm.log on Thu May 19 18:22:07 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219e_uvs/J0401-1606_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0401-1606_S_uva.fits ! AN table 1: 41 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.903117 visibilities/baseline/integration-bin. ! Found source: J0401-1606 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 5332 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0401-1606_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.019827Jy sigma=20.384148 ! Fit after self-cal, rms=0.848866Jy sigma=17.037190 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.79 mas, bpa=13.57 degrees ! Estimated noise=0.729529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1191 Jy ! Component: 100 - total flux cleaned = 0.145072 Jy ! Total flux subtracted in 100 components = 0.145072 Jy ! Clean residual min=-0.004871 max=0.007244 Jy/beam ! Clean residual mean=-0.000012 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.145072 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.145072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071564Jy sigma=1.367831 ! Fit after self-cal, rms=0.071561Jy sigma=1.367762 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.991 mas, bmaj=12.04 mas, bpa=12.87 degrees ! Estimated noise=0.503039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645638 Jy ! Component: 100 - total flux cleaned = 0.00930997 Jy ! Component: 150 - total flux cleaned = 0.0110841 Jy ! Component: 200 - total flux cleaned = 0.0122387 Jy ! Total flux subtracted in 200 components = 0.0122387 Jy ! Clean residual min=-0.003702 max=0.004300 Jy/beam ! Clean residual mean=-0.000001 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.157311 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.157311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070911Jy sigma=1.358593 ! Fit after self-cal, rms=0.070913Jy sigma=1.358536 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.991 x 12.04 at 12.87 degrees (North through East) ! Clean map min=-0.0035816 max=0.15168 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.01 KP 1.01 ! LA 1.02 NL 1.03 OV 1.00 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.98 KP 0.99 ! LA 1.04 NL 0.96 OV 0.98 PT 1.02 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.01 KP 1.01 ! LA 0.98 NL 0.93 OV 0.94 PT 0.97 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.070913Jy sigma=1.358536 ! Fit after self-cal, rms=0.069786Jy sigma=1.353082 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=12.05 mas, bpa=12.84 degrees ! Estimated noise=0.497533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000823682 Jy ! Component: 100 - total flux cleaned = -0.000825041 Jy ! Component: 150 - total flux cleaned = -0.000768826 Jy ! Component: 200 - total flux cleaned = -0.000690908 Jy ! Total flux subtracted in 200 components = -0.000690908 Jy ! Clean residual min=-0.003415 max=0.003792 Jy/beam ! Clean residual mean=-0.000005 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.15662 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.15662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069771Jy sigma=1.352080 ! Fit after self-cal, rms=0.069779Jy sigma=1.352009 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069779Jy sigma=1.352009 ! Fit after self-cal, rms=0.068928Jy sigma=1.363643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.006 mas, bmaj=12.09 mas, bpa=12.91 degrees ! Estimated noise=0.490044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189512 Jy ! Component: 100 - total flux cleaned = -0.00189254 Jy ! Component: 150 - total flux cleaned = -0.00193171 Jy ! Component: 200 - total flux cleaned = -0.00189843 Jy ! Total flux subtracted in 200 components = -0.00189843 Jy ! Clean residual min=-0.003265 max=0.003849 Jy/beam ! Clean residual mean=0.000000 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.154721 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.154721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068892Jy sigma=1.360307 ! Fit after self-cal, rms=0.068906Jy sigma=1.360225 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-94, -82.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218513 Jy ! Component: 100 - total flux cleaned = 0.0015862 Jy ! Component: 150 - total flux cleaned = 0.00115298 Jy ! Component: 200 - total flux cleaned = 0.000947297 Jy ! Total flux subtracted in 200 components = 0.000947297 Jy ! Clean residual min=-0.003004 max=0.003000 Jy/beam ! Clean residual mean=0.000003 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.155669 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.155669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068811Jy sigma=1.353325 ! Fit after self-cal, rms=0.068796Jy sigma=1.353112 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068796Jy sigma=1.353112 ! Fit after self-cal, rms=0.067883Jy sigma=1.352003 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.01 mas, bmaj=12.11 mas, bpa=12.96 degrees ! Estimated noise=0.483762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00063041 Jy ! Component: 100 - total flux cleaned = -0.00100272 Jy ! Component: 150 - total flux cleaned = -0.00118165 Jy ! Component: 200 - total flux cleaned = -0.00137593 Jy ! Total flux subtracted in 200 components = -0.00137593 Jy ! Clean residual min=-0.002951 max=0.003028 Jy/beam ! Clean residual mean=0.000004 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.154293 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 84 components and 0.154293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067849Jy sigma=1.348468 ! Fit after self-cal, rms=0.067849Jy sigma=1.348421 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.07105e-06 Jy ! Component: 100 - total flux cleaned = -5.93759e-05 Jy ! Component: 150 - total flux cleaned = -9.01407e-05 Jy ! Component: 200 - total flux cleaned = -0.000119917 Jy ! Total flux subtracted in 200 components = -0.000119917 Jy ! Clean residual min=-0.002968 max=0.002950 Jy/beam ! Clean residual mean=0.000003 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.154173 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 0.154173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067835Jy sigma=1.347408 ! Fit after self-cal, rms=0.067834Jy sigma=1.347393 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067834Jy sigma=1.347393 ! Fit after self-cal, rms=0.067171Jy sigma=1.346838 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.955 mas, bmaj=16.05 mas, bpa=3.605 degrees ! Estimated noise=0.551959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146251 Jy ! Component: 100 - total flux cleaned = -0.00150804 Jy ! Component: 150 - total flux cleaned = -0.00158369 Jy ! Component: 200 - total flux cleaned = -0.00158265 Jy ! Total flux subtracted in 200 components = -0.00158265 Jy ! Clean residual min=-0.002590 max=0.003189 Jy/beam ! Clean residual mean=0.000007 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.15259 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 125 components and 0.15259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067169Jy sigma=1.345160 ! Fit after self-cal, rms=0.067167Jy sigma=1.345119 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.39976e-05 Jy ! Component: 100 - total flux cleaned = 4.38066e-05 Jy ! Component: 150 - total flux cleaned = 4.3846e-05 Jy ! Component: 200 - total flux cleaned = 7.02775e-05 Jy ! Total flux subtracted in 200 components = 7.02775e-05 Jy ! Clean residual min=-0.002487 max=0.003088 Jy/beam ! Clean residual mean=0.000007 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.15266 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 143 components and 0.15266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067172Jy sigma=1.344693 ! Fit after self-cal, rms=0.067169Jy sigma=1.344664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=12.13 mas, bpa=12.99 degrees ! Estimated noise=0.478972 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.014 x 12.13 at 12.99 degrees (North through East) ! Clean map min=-0.0028986 max=0.14433 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=10.86 mas, bpa=13.71 degrees ! Estimated noise=0.695648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113519 Jy ! Component: 100 - total flux cleaned = 0.1383 Jy ! Component: 150 - total flux cleaned = 0.145145 Jy ! Component: 200 - total flux cleaned = 0.147039 Jy ! Total flux subtracted in 200 components = 0.147039 Jy ! Clean residual min=-0.003973 max=0.004200 Jy/beam ! Clean residual mean=-0.000001 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.147039 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.147039 Jy ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=12.13 mas, bpa=12.99 degrees ! Estimated noise=0.478972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38.5, -51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459098 Jy ! Component: 100 - total flux cleaned = 0.00613904 Jy ! Component: 150 - total flux cleaned = 0.00623501 Jy ! Component: 200 - total flux cleaned = 0.00623471 Jy ! Total flux subtracted in 200 components = 0.00623471 Jy ! Clean residual min=-0.002947 max=0.003407 Jy/beam ! Clean residual mean=0.000002 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.153273 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.153273 Jy ! Inverting map ! Added new window around map position (-45, 51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220095 Jy ! Component: 100 - total flux cleaned = 0.00214008 Jy ! Component: 150 - total flux cleaned = 0.00214127 Jy ! Component: 200 - total flux cleaned = 0.0022569 Jy ! Total flux subtracted in 200 components = 0.0022569 Jy ! Clean residual min=-0.002745 max=0.002404 Jy/beam ! Clean residual mean=0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.15553 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 84 components and 0.15553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.955 mas, bmaj=16.05 mas, bpa=3.605 degrees ! Estimated noise=0.551959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249388 Jy ! Component: 100 - total flux cleaned = 0.000248679 Jy ! Component: 150 - total flux cleaned = 0.000205747 Jy ! Component: 200 - total flux cleaned = 0.000129863 Jy ! Total flux subtracted in 200 components = 0.000129863 Jy ! Clean residual min=-0.002285 max=0.002485 Jy/beam ! Clean residual mean=0.000007 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.15566 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.63696e-07 Jy ! Component: 100 - total flux cleaned = -3.16057e-05 Jy ! Component: 150 - total flux cleaned = -3.13005e-05 Jy ! Component: 200 - total flux cleaned = -3.11247e-05 Jy ! Total flux subtracted in 200 components = -3.11247e-05 Jy ! Clean residual min=-0.002265 max=0.002429 Jy/beam ! Clean residual mean=0.000007 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.155629 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 138 components and 0.155629 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=12.13 mas, bpa=12.99 degrees ! Estimated noise=0.478972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.60486e-05 Jy ! Component: 100 - total flux cleaned = -6.77631e-05 Jy ! Component: 150 - total flux cleaned = -6.69461e-05 Jy ! Component: 200 - total flux cleaned = -6.8187e-05 Jy ! Total flux subtracted in 200 components = -6.8187e-05 Jy ! Clean residual min=-0.002600 max=0.002170 Jy/beam ! Clean residual mean=0.000004 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.155561 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 156 components and 0.155561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066981Jy sigma=1.335570 ! Fit after self-cal, rms=0.066961Jy sigma=1.335115 wmodel /J0401-1606_S_map.mod ! wmodel: Unable to open new model file: /J0401-1606_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219e_uvs/J0401-1606_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.014 x 12.13 at 12.99 degrees (North through East) ! Clean map min=-0.0026056 max=0.14315 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0401-1606_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.143149 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000591994 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24065 1.24065 2.4813 4.96259 9.92519 19.8504 39.7008 79.4015 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.143 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 241.808 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0401-1606_S_dfm.log closed on Thu May 19 18:22:09 2016