! Started logfile: /scr/pima/bg219e_uvs/J0348-2749_X_dfm.log on Thu May 19 18:22:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0348-2749_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0348-2749_X_uva.fits
! AN table 1: 16 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.680556 visibilities/baseline/integration-bin.
! Found source: J0348-2749
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 4704 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0348-2749_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.106101Jy  sigma=20.096758
! Fit after  self-cal, rms=0.543308Jy  sigma=9.599780
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9106 mas, bmaj=3.737 mas, bpa=21.65 degrees
! Estimated noise=0.984633 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.350117 Jy
! Component: 100  -  total flux cleaned = 0.440124 Jy
! Total flux subtracted in 100 components = 0.440124 Jy
! Clean residual min=-0.019789 max=0.041957 Jy/beam
! Clean residual mean=-0.000103 rms=0.006725 Jy/beam
! Combined flux in latest and established models = 0.440124 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.440124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.132895Jy  sigma=2.360879
! Fit after  self-cal, rms=0.132832Jy  sigma=2.359953
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0501434 Jy
! Component: 100  -  total flux cleaned = 0.0816628 Jy
! Total flux subtracted in 100 components = 0.0816628 Jy
! Clean residual min=-0.013329 max=0.026528 Jy/beam
! Clean residual mean=-0.000055 rms=0.004270 Jy/beam
! Combined flux in latest and established models = 0.521786 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 35 components and 0.521787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101696Jy  sigma=1.754807
! Fit after  self-cal, rms=0.101480Jy  sigma=1.751915
! Inverting map 
! Added new window around map position (2.6, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273445 Jy
! Component: 100  -  total flux cleaned = 0.0459377 Jy
! Total flux subtracted in 100 components = 0.0459377 Jy
! Clean residual min=-0.010655 max=0.012474 Jy/beam
! Clean residual mean=-0.000030 rms=0.003096 Jy/beam
! Combined flux in latest and established models = 0.567724 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 65 components and 0.567724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089774Jy  sigma=1.524240
! Fit after  self-cal, rms=0.089552Jy  sigma=1.519489
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.239 mas, bmaj=4.071 mas, bpa=18.37 degrees
! Estimated noise=0.587422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219266 Jy
! Component: 100  -  total flux cleaned = 0.0356143 Jy
! Component: 150  -  total flux cleaned = 0.0451551 Jy
! Component: 200  -  total flux cleaned = 0.0519592 Jy
! Total flux subtracted in 200 components = 0.0519592 Jy
! Clean residual min=-0.008691 max=0.007939 Jy/beam
! Clean residual mean=0.000004 rms=0.002132 Jy/beam
! Combined flux in latest and established models = 0.619683 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 95 components and 0.619683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083494Jy  sigma=1.394772
! Fit after  self-cal, rms=0.083321Jy  sigma=1.391487
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.239 x 4.071 at 18.37 degrees (North through East)
! Clean map  min=-0.0085248  max=0.43874 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.14     KP        1.00     
!   LA        0.99     NL        1.04     OV        0.99     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.18     KP        0.97     
!   LA        0.98     NL        1.00     OV        0.98     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.18     KP        0.99     
!   LA        0.97     NL        1.04     OV        0.98     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.15     KP        0.98     
!   LA        0.99     NL        0.99     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.17     KP        0.98     
!   LA        0.97     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.17     KP        0.99     
!   LA        0.98     NL        1.02     OV        1.00     PT        1.03     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.17     KP        0.98     
!   LA        1.00     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.10     KP        0.98     
!   LA        1.00     NL        0.98     OV        0.98     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.10     KP        0.98     
!   LA        0.99     NL        1.01     OV        0.97     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.12     KP        0.99     
!   LA        0.97     NL        1.00     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.13     KP        1.00     
!   LA        0.97     NL        0.99     OV        0.97     PT        1.00     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.083321Jy  sigma=1.391487
! Fit after  self-cal, rms=0.083767Jy  sigma=1.361970
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.248 mas, bmaj=4.096 mas, bpa=18.5 degrees
! Estimated noise=0.585948 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00097805 Jy
! Component: 100  -  total flux cleaned = -0.00128134 Jy
! Component: 150  -  total flux cleaned = -0.00105313 Jy
! Component: 200  -  total flux cleaned = -0.000855069 Jy
! Total flux subtracted in 200 components = -0.000855069 Jy
! Clean residual min=-0.007386 max=0.005749 Jy/beam
! Clean residual mean=0.000011 rms=0.001685 Jy/beam
! Combined flux in latest and established models = 0.618828 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 114 components and 0.618828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083284Jy  sigma=1.352313
! Fit after  self-cal, rms=0.083273Jy  sigma=1.351442
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083273Jy  sigma=1.351442
! Fit after  self-cal, rms=0.083144Jy  sigma=1.339730
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.249 mas, bmaj=4.088 mas, bpa=18.47 degrees
! Estimated noise=0.584084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00325835 Jy
! Component: 100  -  total flux cleaned = -0.00379089 Jy
! Component: 150  -  total flux cleaned = -0.0037087 Jy
! Component: 200  -  total flux cleaned = -0.00363348 Jy
! Total flux subtracted in 200 components = -0.00363348 Jy
! Clean residual min=-0.006163 max=0.004846 Jy/beam
! Clean residual mean=0.000011 rms=0.001393 Jy/beam
! Combined flux in latest and established models = 0.615194 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 125 components and 0.615194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082877Jy  sigma=1.334396
! Fit after  self-cal, rms=0.082873Jy  sigma=1.334054
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.47214e-06 Jy
! Component: 100  -  total flux cleaned = 0.000204941 Jy
! Component: 150  -  total flux cleaned = 0.000264806 Jy
! Component: 200  -  total flux cleaned = 0.00031699 Jy
! Total flux subtracted in 200 components = 0.00031699 Jy
! Clean residual min=-0.005947 max=0.004779 Jy/beam
! Clean residual mean=0.000011 rms=0.001364 Jy/beam
! Combined flux in latest and established models = 0.615511 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 135 components and 0.615511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082787Jy  sigma=1.332407
! Fit after  self-cal, rms=0.082781Jy  sigma=1.332268
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082781Jy  sigma=1.332268
! Fit after  self-cal, rms=0.083223Jy  sigma=1.330887
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=4.088 mas, bpa=18.48 degrees
! Estimated noise=0.582936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00286254 Jy
! Component: 100  -  total flux cleaned = -0.00335929 Jy
! Component: 150  -  total flux cleaned = -0.00347104 Jy
! Component: 200  -  total flux cleaned = -0.00352191 Jy
! Total flux subtracted in 200 components = -0.00352191 Jy
! Clean residual min=-0.005494 max=0.004566 Jy/beam
! Clean residual mean=0.000010 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 0.61199 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 141 components and 0.61199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083084Jy  sigma=1.328601
! Fit after  self-cal, rms=0.083087Jy  sigma=1.328518
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.46234e-05 Jy
! Component: 100  -  total flux cleaned = 3.34698e-05 Jy
! Component: 150  -  total flux cleaned = 3.21792e-05 Jy
! Component: 200  -  total flux cleaned = -9.72097e-06 Jy
! Total flux subtracted in 200 components = -9.72097e-06 Jy
! Clean residual min=-0.005417 max=0.004511 Jy/beam
! Clean residual mean=0.000010 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.61198 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 147 components and 0.61198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083032Jy  sigma=1.327728
! Fit after  self-cal, rms=0.083031Jy  sigma=1.327682
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083031Jy  sigma=1.327682
! Fit after  self-cal, rms=0.083335Jy  sigma=1.326952
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.474 mas, bmaj=6.079 mas, bpa=0.159 degrees
! Estimated noise=0.63408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00229876 Jy
! Component: 100  -  total flux cleaned = -0.00328754 Jy
! Component: 150  -  total flux cleaned = -0.0036093 Jy
! Component: 200  -  total flux cleaned = -0.00385965 Jy
! Total flux subtracted in 200 components = -0.00385965 Jy
! Clean residual min=-0.005854 max=0.004823 Jy/beam
! Clean residual mean=0.000015 rms=0.001450 Jy/beam
! Combined flux in latest and established models = 0.60812 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 157 components and 0.60812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083297Jy  sigma=1.325899
! Fit after  self-cal, rms=0.083299Jy  sigma=1.325738
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000397718 Jy
! Component: 100  -  total flux cleaned = -0.000397848 Jy
! Component: 150  -  total flux cleaned = -0.00047567 Jy
! Component: 200  -  total flux cleaned = -0.000524707 Jy
! Total flux subtracted in 200 components = -0.000524707 Jy
! Clean residual min=-0.005829 max=0.004869 Jy/beam
! Clean residual mean=0.000015 rms=0.001443 Jy/beam
! Combined flux in latest and established models = 0.607596 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 166 components and 0.607596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083286Jy  sigma=1.325467
! Fit after  self-cal, rms=0.083287Jy  sigma=1.325430
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=4.089 mas, bpa=18.5 degrees
! Estimated noise=0.581749 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.252 x 4.089 at 18.5 degrees (North through East)
! Clean map  min=-0.0051214  max=0.44128 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9132 mas, bmaj=3.755 mas, bpa=21.83 degrees
! Estimated noise=0.983662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.349452 Jy
! Component: 100  -  total flux cleaned = 0.436209 Jy
! Component: 150  -  total flux cleaned = 0.482406 Jy
! Component: 200  -  total flux cleaned = 0.513995 Jy
! Total flux subtracted in 200 components = 0.513995 Jy
! Clean residual min=-0.011475 max=0.017696 Jy/beam
! Clean residual mean=-0.000052 rms=0.003387 Jy/beam
! Combined flux in latest and established models = 0.513994 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.513994 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=4.089 mas, bpa=18.5 degrees
! Estimated noise=0.581749 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0330871 Jy
! Component: 100  -  total flux cleaned = 0.0527899 Jy
! Component: 150  -  total flux cleaned = 0.0653376 Jy
! Component: 200  -  total flux cleaned = 0.0740648 Jy
! Total flux subtracted in 200 components = 0.0740648 Jy
! Clean residual min=-0.005961 max=0.006409 Jy/beam
! Clean residual mean=-0.000002 rms=0.001539 Jy/beam
! Combined flux in latest and established models = 0.588059 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 90 components and 0.588059 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.474 mas, bmaj=6.079 mas, bpa=0.159 degrees
! Estimated noise=0.63408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00737848 Jy
! Component: 100  -  total flux cleaned = 0.0119415 Jy
! Component: 150  -  total flux cleaned = 0.0149533 Jy
! Component: 200  -  total flux cleaned = 0.0169531 Jy
! Total flux subtracted in 200 components = 0.0169531 Jy
! Clean residual min=-0.005995 max=0.004999 Jy/beam
! Clean residual mean=0.000014 rms=0.001484 Jy/beam
! Combined flux in latest and established models = 0.605012 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00068702 Jy
! Component: 100  -  total flux cleaned = 0.00108989 Jy
! Component: 150  -  total flux cleaned = 0.00124482 Jy
! Component: 200  -  total flux cleaned = 0.0012457 Jy
! Total flux subtracted in 200 components = 0.0012457 Jy
! Clean residual min=-0.005770 max=0.004927 Jy/beam
! Clean residual mean=0.000016 rms=0.001460 Jy/beam
! Combined flux in latest and established models = 0.606258 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 129 components and 0.606258 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.252 mas, bmaj=4.089 mas, bpa=18.5 degrees
! Estimated noise=0.581749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000449686 Jy
! Component: 100  -  total flux cleaned = 2.5888e-05 Jy
! Component: 150  -  total flux cleaned = 9.57694e-05 Jy
! Component: 200  -  total flux cleaned = 9.84065e-05 Jy
! Total flux subtracted in 200 components = 9.84065e-05 Jy
! Clean residual min=-0.004861 max=0.004513 Jy/beam
! Clean residual mean=0.000010 rms=0.001213 Jy/beam
! Combined flux in latest and established models = 0.606356 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 140 components and 0.606356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083368Jy  sigma=1.327728
! Fit after  self-cal, rms=0.083353Jy  sigma=1.327475
wmodel /J0348-2749_X_map.mod
! wmodel: Unable to open new model file: /J0348-2749_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0348-2749_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.252 x 4.089 at 18.5 degrees (North through East)
! Clean map  min=-0.0047238  max=0.44893 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0348-2749_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.448934 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00121067 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.809033 0.809033 1.61807 3.23613 6.47226 12.9445 25.8891 51.7781
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0036 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.448 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  370.813 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0348-2749_X_dfm.log closed on Thu May 19 18:22:06 2016