! Started logfile: /scr/pima/bg219e_uvs/J0324+3410_X_dfm.log on Thu May 19 18:21:55 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0324+3410_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0324+3410_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.908951 visibilities/baseline/integration-bin.
! Found source: J0324+3410
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14136 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0324+3410_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.024197Jy  sigma=24.378543
! Fit after  self-cal, rms=0.815441Jy  sigma=19.333747
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9375 mas, bmaj=1.793 mas, bpa=21.97 degrees
! Estimated noise=0.513187 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135983 Jy
! Component: 100  -  total flux cleaned = 0.181503 Jy
! Total flux subtracted in 100 components = 0.181503 Jy
! Clean residual min=-0.009401 max=0.019110 Jy/beam
! Clean residual mean=-0.000006 rms=0.002484 Jy/beam
! Combined flux in latest and established models = 0.181503 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.181503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075323Jy  sigma=1.714486
! Fit after  self-cal, rms=0.075083Jy  sigma=1.709593
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207591 Jy
! Component: 100  -  total flux cleaned = 0.0307913 Jy
! Total flux subtracted in 100 components = 0.0307913 Jy
! Clean residual min=-0.007332 max=0.014579 Jy/beam
! Clean residual mean=-0.000010 rms=0.001750 Jy/beam
! Combined flux in latest and established models = 0.212294 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 15 components and 0.212294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068290Jy  sigma=1.535559
! Fit after  self-cal, rms=0.068189Jy  sigma=1.533546
! Inverting map 
! Added new window around map position (6.2, -4.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140173 Jy
! Component: 100  -  total flux cleaned = 0.021127 Jy
! Total flux subtracted in 100 components = 0.021127 Jy
! Clean residual min=-0.005408 max=0.008350 Jy/beam
! Clean residual mean=-0.000004 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.233421 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.233421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064621Jy  sigma=1.444853
! Fit after  self-cal, rms=0.064206Jy  sigma=1.434229
! Inverting map 
! Added new window around map position (4.8, -3.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0077484 Jy
! Component: 100  -  total flux cleaned = 0.0123411 Jy
! Total flux subtracted in 100 components = 0.0123411 Jy
! Clean residual min=-0.004800 max=0.006533 Jy/beam
! Clean residual mean=-0.000002 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.245762 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 0.245762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063013Jy  sigma=1.403497
! Fit after  self-cal, rms=0.062920Jy  sigma=1.401485
! Inverting map 
! Added new window around map position (1.4, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00563194 Jy
! Component: 100  -  total flux cleaned = 0.00922012 Jy
! Total flux subtracted in 100 components = 0.00922012 Jy
! Clean residual min=-0.003948 max=0.003421 Jy/beam
! Clean residual mean=-0.000002 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.254982 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.254982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062321Jy  sigma=1.385889
! Fit after  self-cal, rms=0.062279Jy  sigma=1.385125
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.195 mas, bmaj=1.99 mas, bpa=16.56 degrees
! Estimated noise=0.275199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00441892 Jy
! Component: 100  -  total flux cleaned = 0.00737243 Jy
! Component: 150  -  total flux cleaned = 0.00966861 Jy
! Component: 200  -  total flux cleaned = 0.0115368 Jy
! Total flux subtracted in 200 components = 0.0115368 Jy
! Clean residual min=-0.002373 max=0.002581 Jy/beam
! Clean residual mean=-0.000001 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.266519 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 71 components and 0.266519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061892Jy  sigma=1.374770
! Fit after  self-cal, rms=0.061861Jy  sigma=1.374106
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.195 x 1.99 at 16.56 degrees (North through East)
! Clean map  min=-0.0022957  max=0.17868 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.00     KP        1.01     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        1.04     
!   LA        0.97     NL        1.00     OV        0.98     PT        0.96     
!   SC        0.91     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.00     KP        1.04     
!   LA        0.95     NL        1.01     OV        0.98     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        1.04     
!   LA        0.95     NL        1.00     OV        1.01     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.02     KP        1.03     
!   LA        0.98     NL        0.97     OV        0.98     PT        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.05     KP        1.03     
!   LA        0.93     NL        1.02     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.05     KP        1.03     
!   LA        0.96     NL        1.00     OV        1.00     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.04     
!   LA        0.98     NL        1.02     OV        1.00     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        1.04     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        1.03     
!   LA        0.99     NL        1.00     OV        1.02     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.03     KP        1.01     
!   LA        0.99     NL        1.00     OV        1.02     PT        0.97     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.061861Jy  sigma=1.374106
! Fit after  self-cal, rms=0.061636Jy  sigma=1.364892
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.192 mas, bmaj=1.998 mas, bpa=16.79 degrees
! Estimated noise=0.273748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000687502 Jy
! Component: 100  -  total flux cleaned = 0.00097273 Jy
! Component: 150  -  total flux cleaned = 0.00128662 Jy
! Component: 200  -  total flux cleaned = 0.00152659 Jy
! Total flux subtracted in 200 components = 0.00152659 Jy
! Clean residual min=-0.002032 max=0.001923 Jy/beam
! Clean residual mean=0.000000 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.268046 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 87 components and 0.268046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061588Jy  sigma=1.363658
! Fit after  self-cal, rms=0.061605Jy  sigma=1.363561
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061605Jy  sigma=1.363561
! Fit after  self-cal, rms=0.061690Jy  sigma=1.358923
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.192 mas, bmaj=1.998 mas, bpa=16.9 degrees
! Estimated noise=0.273657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000331632 Jy
! Component: 100  -  total flux cleaned = 0.000474857 Jy
! Component: 150  -  total flux cleaned = 0.000627498 Jy
! Component: 200  -  total flux cleaned = 0.000754103 Jy
! Total flux subtracted in 200 components = 0.000754103 Jy
! Clean residual min=-0.001846 max=0.001726 Jy/beam
! Clean residual mean=-0.000000 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.2688 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 96 components and 0.2688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061669Jy  sigma=1.358310
! Fit after  self-cal, rms=0.061675Jy  sigma=1.358201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134146 Jy
! Component: 100  -  total flux cleaned = 0.000334779 Jy
! Component: 150  -  total flux cleaned = 0.000522212 Jy
! Component: 200  -  total flux cleaned = 0.0006268 Jy
! Total flux subtracted in 200 components = 0.0006268 Jy
! Clean residual min=-0.001809 max=0.001672 Jy/beam
! Clean residual mean=-0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.269427 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.269427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061668Jy  sigma=1.357985
! Fit after  self-cal, rms=0.061667Jy  sigma=1.357952
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061667Jy  sigma=1.357952
! Fit after  self-cal, rms=0.061708Jy  sigma=1.357837
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.194 mas, bmaj=1.999 mas, bpa=16.89 degrees
! Estimated noise=0.273679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.68564e-05 Jy
! Component: 100  -  total flux cleaned = 4.38827e-06 Jy
! Component: 150  -  total flux cleaned = 4.47621e-05 Jy
! Component: 200  -  total flux cleaned = 6.86209e-05 Jy
! Total flux subtracted in 200 components = 6.86209e-05 Jy
! Clean residual min=-0.001762 max=0.001622 Jy/beam
! Clean residual mean=-0.000000 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.269495 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 0.269495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061700Jy  sigma=1.357614
! Fit after  self-cal, rms=0.061698Jy  sigma=1.357578
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.00355e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112154 Jy
! Component: 150  -  total flux cleaned = 0.000177857 Jy
! Component: 200  -  total flux cleaned = 0.00022857 Jy
! Total flux subtracted in 200 components = 0.00022857 Jy
! Clean residual min=-0.001739 max=0.001607 Jy/beam
! Clean residual mean=-0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.269724 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 113 components and 0.269724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061694Jy  sigma=1.357471
! Fit after  self-cal, rms=0.061694Jy  sigma=1.357461
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061694Jy  sigma=1.357461
! Fit after  self-cal, rms=0.061723Jy  sigma=1.357420
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.19 mas, bmaj=2.623 mas, bpa=-4.042 degrees
! Estimated noise=0.31904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00044703 Jy
! Component: 100  -  total flux cleaned = 0.000776732 Jy
! Component: 150  -  total flux cleaned = 0.000975557 Jy
! Component: 200  -  total flux cleaned = 0.00108625 Jy
! Total flux subtracted in 200 components = 0.00108625 Jy
! Clean residual min=-0.002154 max=0.001533 Jy/beam
! Clean residual mean=-0.000000 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.27081 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 124 components and 0.27081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061723Jy  sigma=1.357355
! Fit after  self-cal, rms=0.061721Jy  sigma=1.357338
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.57904e-05 Jy
! Component: 100  -  total flux cleaned = 0.000219201 Jy
! Component: 150  -  total flux cleaned = 0.00027869 Jy
! Component: 200  -  total flux cleaned = 0.000315058 Jy
! Total flux subtracted in 200 components = 0.000315058 Jy
! Clean residual min=-0.002155 max=0.001546 Jy/beam
! Clean residual mean=-0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.271125 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 128 components and 0.271125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061723Jy  sigma=1.357329
! Fit after  self-cal, rms=0.061721Jy  sigma=1.357326
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.195 mas, bmaj=1.999 mas, bpa=16.89 degrees
! Estimated noise=0.273696 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.195 x 1.999 at 16.89 degrees (North through East)
! Clean map  min=-0.0016601  max=0.17765 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9364 mas, bmaj=1.799 mas, bpa=22.21 degrees
! Estimated noise=0.512334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135806 Jy
! Component: 100  -  total flux cleaned = 0.181911 Jy
! Component: 150  -  total flux cleaned = 0.205131 Jy
! Component: 200  -  total flux cleaned = 0.22025 Jy
! Total flux subtracted in 200 components = 0.22025 Jy
! Clean residual min=-0.005073 max=0.008381 Jy/beam
! Clean residual mean=-0.000004 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 0.22025 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.22025 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.195 mas, bmaj=1.999 mas, bpa=16.89 degrees
! Estimated noise=0.273696 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139429 Jy
! Component: 100  -  total flux cleaned = 0.0229407 Jy
! Component: 150  -  total flux cleaned = 0.0291312 Jy
! Component: 200  -  total flux cleaned = 0.0335704 Jy
! Total flux subtracted in 200 components = 0.0335704 Jy
! Clean residual min=-0.002162 max=0.002513 Jy/beam
! Clean residual mean=-0.000002 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.25382 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 45 components and 0.25382 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.19 mas, bmaj=2.623 mas, bpa=-4.042 degrees
! Estimated noise=0.31904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00476455 Jy
! Component: 100  -  total flux cleaned = 0.00792552 Jy
! Component: 150  -  total flux cleaned = 0.010182 Jy
! Component: 200  -  total flux cleaned = 0.0118945 Jy
! Total flux subtracted in 200 components = 0.0118945 Jy
! Clean residual min=-0.002043 max=0.001727 Jy/beam
! Clean residual mean=-0.000001 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.265715 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133628 Jy
! Component: 100  -  total flux cleaned = 0.00239063 Jy
! Component: 150  -  total flux cleaned = 0.00322785 Jy
! Component: 200  -  total flux cleaned = 0.00389365 Jy
! Total flux subtracted in 200 components = 0.00389365 Jy
! Clean residual min=-0.002147 max=0.001556 Jy/beam
! Clean residual mean=-0.000000 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.269608 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 115 components and 0.269609 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.195 mas, bmaj=1.999 mas, bpa=16.89 degrees
! Estimated noise=0.273696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000442212 Jy
! Component: 100  -  total flux cleaned = 0.000650272 Jy
! Component: 150  -  total flux cleaned = 0.000741591 Jy
! Component: 200  -  total flux cleaned = 0.000742009 Jy
! Total flux subtracted in 200 components = 0.000742009 Jy
! Clean residual min=-0.001740 max=0.001641 Jy/beam
! Clean residual mean=-0.000000 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.270351 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 130 components and 0.270351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061737Jy  sigma=1.357582
! Fit after  self-cal, rms=0.061733Jy  sigma=1.357543
wmodel /J0324+3410_X_map.mod
! wmodel: Unable to open new model file: /J0324+3410_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0324+3410_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.195 x 1.999 at 16.89 degrees (North through East)
! Clean map  min=-0.001687  max=0.17773 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0324+3410_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.177735 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000379677 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.64086 0.64086 1.28172 2.56344 5.12688 10.2538 20.5075 41.015 82.0301
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.177 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  468.121 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0324+3410_X_dfm.log closed on Thu May 19 18:21:58 2016