! Started logfile: /scr/pima/bg219e_uvs/J0319+3101_S_dfm.log on Thu May 19 18:21:43 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219e_uvs/J0319+3101_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0319+3101_S_uva.fits ! AN table 1: 62 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.780914 visibilities/baseline/integration-bin. ! Found source: J0319+3101 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 6972 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0319+3101_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003644Jy sigma=23.716874 ! Fit after self-cal, rms=0.950352Jy sigma=22.552481 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=7.459 mas, bpa=21.47 degrees ! Estimated noise=0.618417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382006 Jy ! Component: 100 - total flux cleaned = 0.0468327 Jy ! Total flux subtracted in 100 components = 0.0468327 Jy ! Clean residual min=-0.003453 max=0.003942 Jy/beam ! Clean residual mean=0.000000 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.0468327 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0468327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068091Jy sigma=1.376136 ! Fit after self-cal, rms=0.066500Jy sigma=1.333949 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.448 mas, bmaj=7.765 mas, bpa=18.75 degrees ! Estimated noise=0.397381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600155 Jy ! Component: 100 - total flux cleaned = 0.00849837 Jy ! Component: 150 - total flux cleaned = 0.00988089 Jy ! Component: 200 - total flux cleaned = 0.0104358 Jy ! Total flux subtracted in 200 components = 0.0104358 Jy ! Clean residual min=-0.002587 max=0.002886 Jy/beam ! Clean residual mean=0.000003 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0572685 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.0572685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065835Jy sigma=1.323667 ! Fit after self-cal, rms=0.065828Jy sigma=1.323096 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.448 x 7.765 at 18.75 degrees (North through East) ! Clean map min=-0.0025816 max=0.051834 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.94 HN 1.01 KP 1.01 ! LA 0.96 NL 0.99 OV 0.98 PT 1.00 ! SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.88 HN 0.95 KP 1.04 ! LA 1.00 NL 1.09 OV 1.13 PT 1.00 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.94 HN 1.05 KP 1.01 ! LA 0.99 NL 1.00 OV 1.00 PT 1.05 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.02 KP 0.95 ! LA 1.09 NL 1.04 OV 1.13 PT 0.99 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.065828Jy sigma=1.323096 ! Fit after self-cal, rms=0.065302Jy sigma=1.319332 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.387 mas, bmaj=7.742 mas, bpa=19.17 degrees ! Estimated noise=0.399114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158616 Jy ! Component: 100 - total flux cleaned = 0.00189948 Jy ! Component: 150 - total flux cleaned = 0.00196924 Jy ! Component: 200 - total flux cleaned = 0.00196933 Jy ! Total flux subtracted in 200 components = 0.00196933 Jy ! Clean residual min=-0.002507 max=0.002678 Jy/beam ! Clean residual mean=0.000006 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0592378 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0592378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065232Jy sigma=1.318686 ! Fit after self-cal, rms=0.065215Jy sigma=1.318236 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065215Jy sigma=1.318236 ! Fit after self-cal, rms=0.066360Jy sigma=1.315150 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.363 mas, bmaj=7.715 mas, bpa=19.39 degrees ! Estimated noise=0.409428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145338 Jy ! Component: 100 - total flux cleaned = 0.00219424 Jy ! Component: 150 - total flux cleaned = 0.00233912 Jy ! Component: 200 - total flux cleaned = 0.00241153 Jy ! Total flux subtracted in 200 components = 0.00241153 Jy ! Clean residual min=-0.002592 max=0.002450 Jy/beam ! Clean residual mean=0.000003 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0616493 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.0616493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066299Jy sigma=1.314722 ! Fit after self-cal, rms=0.066319Jy sigma=1.314491 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148276 Jy ! Component: 100 - total flux cleaned = 0.000147639 Jy ! Component: 150 - total flux cleaned = 0.000162242 Jy ! Component: 200 - total flux cleaned = 0.000175932 Jy ! Total flux subtracted in 200 components = 0.000175932 Jy ! Clean residual min=-0.002598 max=0.002426 Jy/beam ! Clean residual mean=0.000004 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0618253 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0618253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066312Jy sigma=1.314342 ! Fit after self-cal, rms=0.066311Jy sigma=1.314331 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066311Jy sigma=1.314331 ! Fit after self-cal, rms=0.067250Jy sigma=1.313931 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.342 mas, bmaj=7.695 mas, bpa=19.61 degrees ! Estimated noise=0.416516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103305 Jy ! Component: 100 - total flux cleaned = 0.00159441 Jy ! Component: 150 - total flux cleaned = 0.00177063 Jy ! Component: 200 - total flux cleaned = 0.00182421 Jy ! Total flux subtracted in 200 components = 0.00182421 Jy ! Clean residual min=-0.002661 max=0.002391 Jy/beam ! Clean residual mean=0.000004 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0636495 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 58 components and 0.0636495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067214Jy sigma=1.313780 ! Fit after self-cal, rms=0.067220Jy sigma=1.313764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.48554e-05 Jy ! Component: 100 - total flux cleaned = 4.03435e-05 Jy ! Component: 150 - total flux cleaned = 5.16056e-05 Jy ! Component: 200 - total flux cleaned = 6.23471e-05 Jy ! Total flux subtracted in 200 components = 6.23471e-05 Jy ! Clean residual min=-0.002661 max=0.002390 Jy/beam ! Clean residual mean=0.000004 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0637118 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.0637118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067216Jy sigma=1.313663 ! Fit after self-cal, rms=0.067216Jy sigma=1.313658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067216Jy sigma=1.313658 ! Fit after self-cal, rms=0.067906Jy sigma=1.313459 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.905 mas, bmaj=9.555 mas, bpa=2.698 degrees ! Estimated noise=0.499958 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107597 Jy ! Component: 100 - total flux cleaned = 0.00121677 Jy ! Component: 150 - total flux cleaned = 0.00128261 Jy ! Component: 200 - total flux cleaned = 0.00130876 Jy ! Total flux subtracted in 200 components = 0.00130876 Jy ! Clean residual min=-0.003276 max=0.002863 Jy/beam ! Clean residual mean=0.000009 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.0650206 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.0650206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067887Jy sigma=1.313524 ! Fit after self-cal, rms=0.067883Jy sigma=1.313425 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.76515e-06 Jy ! Component: 100 - total flux cleaned = -4.70755e-05 Jy ! Component: 150 - total flux cleaned = -2.65207e-05 Jy ! Component: 200 - total flux cleaned = -1.81974e-05 Jy ! Total flux subtracted in 200 components = -1.81974e-05 Jy ! Clean residual min=-0.003268 max=0.002856 Jy/beam ! Clean residual mean=0.000009 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0650024 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.0650024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067883Jy sigma=1.313488 ! Fit after self-cal, rms=0.067880Jy sigma=1.313441 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.33 mas, bmaj=7.68 mas, bpa=19.77 degrees ! Estimated noise=0.421923 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.33 x 7.68 at 19.77 degrees (North through East) ! Clean map min=-0.0026685 max=0.054391 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=7.406 mas, bpa=22.3 degrees ! Estimated noise=0.651157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416189 Jy ! Component: 100 - total flux cleaned = 0.0521877 Jy ! Component: 150 - total flux cleaned = 0.0569472 Jy ! Component: 200 - total flux cleaned = 0.0597086 Jy ! Total flux subtracted in 200 components = 0.0597086 Jy ! Clean residual min=-0.003379 max=0.003894 Jy/beam ! Clean residual mean=0.000000 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.0597086 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0597086 Jy ! Inverting map and beam ! Estimated beam: bmin=4.33 mas, bmaj=7.68 mas, bpa=19.77 degrees ! Estimated noise=0.421923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322478 Jy ! Component: 100 - total flux cleaned = 0.00493777 Jy ! Component: 150 - total flux cleaned = 0.00518184 Jy ! Component: 200 - total flux cleaned = 0.00530098 Jy ! Total flux subtracted in 200 components = 0.00530098 Jy ! Clean residual min=-0.002846 max=0.002202 Jy/beam ! Clean residual mean=0.000004 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0650095 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.0650095 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.905 mas, bmaj=9.555 mas, bpa=2.698 degrees ! Estimated noise=0.499958 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000327766 Jy ! Component: 100 - total flux cleaned = -0.000392698 Jy ! Component: 150 - total flux cleaned = -0.000468835 Jy ! Component: 200 - total flux cleaned = -0.000533829 Jy ! Total flux subtracted in 200 components = -0.000533829 Jy ! Clean residual min=-0.003203 max=0.002738 Jy/beam ! Clean residual mean=0.000010 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0644757 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.40386e-05 Jy ! Component: 100 - total flux cleaned = -0.000106904 Jy ! Component: 150 - total flux cleaned = -0.000106534 Jy ! Component: 200 - total flux cleaned = -0.000106556 Jy ! Total flux subtracted in 200 components = -0.000106556 Jy ! Clean residual min=-0.003164 max=0.002721 Jy/beam ! Clean residual mean=0.000010 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.0643691 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 89 components and 0.0643691 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.33 mas, bmaj=7.68 mas, bpa=19.77 degrees ! Estimated noise=0.421923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000775027 Jy ! Component: 100 - total flux cleaned = 0.000939934 Jy ! Component: 150 - total flux cleaned = 0.00104078 Jy ! Component: 200 - total flux cleaned = 0.00105921 Jy ! Total flux subtracted in 200 components = 0.00105921 Jy ! Clean residual min=-0.002789 max=0.002136 Jy/beam ! Clean residual mean=0.000004 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0654284 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 0.0654284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067833Jy sigma=1.312419 ! Fit after self-cal, rms=0.067797Jy sigma=1.311940 wmodel /J0319+3101_S_map.mod ! wmodel: Unable to open new model file: /J0319+3101_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219e_uvs/J0319+3101_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.33 x 7.68 at 19.77 degrees (North through East) ! Clean map min=-0.0026868 max=0.054611 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0319+3101_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0546107 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000593313 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.25932 3.25932 6.51865 13.0373 26.0746 52.1492 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.054 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 92.043 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0319+3101_S_dfm.log closed on Thu May 19 18:21:45 2016