! Started logfile: /scr/pima/bg219e_uvs/J0253+3835_S_dfm.log on Thu May 19 18:21:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0253+3835_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0253+3835_S_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.904762 visibilities/baseline/integration-bin.
! Found source: J0253+3835
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3648 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0253+3835_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.057903Jy  sigma=24.064705
! Fit after  self-cal, rms=0.679008Jy  sigma=15.473990
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.871 mas, bmaj=6.635 mas, bpa=15.68 degrees
! Estimated noise=0.803589 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.241848 Jy
! Component: 100  -  total flux cleaned = 0.308409 Jy
! Total flux subtracted in 100 components = 0.308409 Jy
! Clean residual min=-0.012048 max=0.028673 Jy/beam
! Clean residual mean=0.000051 rms=0.003812 Jy/beam
! Combined flux in latest and established models = 0.308409 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.308409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085539Jy  sigma=1.897932
! Fit after  self-cal, rms=0.085248Jy  sigma=1.893197
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0328952 Jy
! Component: 100  -  total flux cleaned = 0.0518739 Jy
! Total flux subtracted in 100 components = 0.0518739 Jy
! Clean residual min=-0.009267 max=0.016946 Jy/beam
! Clean residual mean=0.000032 rms=0.002288 Jy/beam
! Combined flux in latest and established models = 0.360283 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 23 components and 0.360283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068376Jy  sigma=1.489760
! Fit after  self-cal, rms=0.068091Jy  sigma=1.485170
! Inverting map 
! Added new window around map position (-3.5, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157881 Jy
! Component: 100  -  total flux cleaned = 0.0252037 Jy
! Total flux subtracted in 100 components = 0.0252037 Jy
! Clean residual min=-0.008174 max=0.007156 Jy/beam
! Clean residual mean=0.000023 rms=0.001703 Jy/beam
! Combined flux in latest and established models = 0.385487 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 43 components and 0.385487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063607Jy  sigma=1.373070
! Fit after  self-cal, rms=0.063382Jy  sigma=1.368608
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.709 mas, bmaj=7.505 mas, bpa=12.33 degrees
! Estimated noise=0.575426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00947911 Jy
! Component: 100  -  total flux cleaned = 0.0155246 Jy
! Component: 150  -  total flux cleaned = 0.0195526 Jy
! Component: 200  -  total flux cleaned = 0.0222544 Jy
! Total flux subtracted in 200 components = 0.0222544 Jy
! Clean residual min=-0.005580 max=0.005752 Jy/beam
! Clean residual mean=0.000026 rms=0.001542 Jy/beam
! Combined flux in latest and established models = 0.407741 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 63 components and 0.407741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061866Jy  sigma=1.328009
! Fit after  self-cal, rms=0.061719Jy  sigma=1.325563
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.709 x 7.505 at 12.33 degrees (North through East)
! Clean map  min=-0.0055176  max=0.31436 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.98     
!   LA        1.00     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.00     KP        1.02     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.99     KP        1.01     
!   LA        1.02     NL        0.96     OV        0.98     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.00     KP        1.00     
!   LA        1.00     NL        0.97     OV        0.99     PT        1.00     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.061719Jy  sigma=1.325563
! Fit after  self-cal, rms=0.061195Jy  sigma=1.313246
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.724 mas, bmaj=7.515 mas, bpa=12.09 degrees
! Estimated noise=0.573805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000914218 Jy
! Component: 100  -  total flux cleaned = 0.00131372 Jy
! Component: 150  -  total flux cleaned = 0.00151547 Jy
! Component: 200  -  total flux cleaned = 0.00179618 Jy
! Total flux subtracted in 200 components = 0.00179618 Jy
! Clean residual min=-0.004928 max=0.005889 Jy/beam
! Clean residual mean=0.000018 rms=0.001443 Jy/beam
! Combined flux in latest and established models = 0.409538 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.409538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061084Jy  sigma=1.309968
! Fit after  self-cal, rms=0.061047Jy  sigma=1.309435
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061047Jy  sigma=1.309435
! Fit after  self-cal, rms=0.060669Jy  sigma=1.296578
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.72 mas, bmaj=7.523 mas, bpa=12 degrees
! Estimated noise=0.573961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000304667 Jy
! Component: 100  -  total flux cleaned = 0.000844872 Jy
! Component: 150  -  total flux cleaned = 0.00121828 Jy
! Component: 200  -  total flux cleaned = 0.00128694 Jy
! Total flux subtracted in 200 components = 0.00128694 Jy
! Clean residual min=-0.004306 max=0.005577 Jy/beam
! Clean residual mean=0.000014 rms=0.001342 Jy/beam
! Combined flux in latest and established models = 0.410825 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 0.410825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060596Jy  sigma=1.294507
! Fit after  self-cal, rms=0.060566Jy  sigma=1.294113
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011033 Jy
! Component: 100  -  total flux cleaned = 7.80026e-05 Jy
! Component: 150  -  total flux cleaned = 0.000200583 Jy
! Component: 200  -  total flux cleaned = 0.000227105 Jy
! Total flux subtracted in 200 components = 0.000227105 Jy
! Clean residual min=-0.004277 max=0.005503 Jy/beam
! Clean residual mean=0.000014 rms=0.001332 Jy/beam
! Combined flux in latest and established models = 0.411052 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 0.411052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060529Jy  sigma=1.293074
! Fit after  self-cal, rms=0.060506Jy  sigma=1.292816
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060506Jy  sigma=1.292816
! Fit after  self-cal, rms=0.060488Jy  sigma=1.292635
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.716 mas, bmaj=7.525 mas, bpa=12 degrees
! Estimated noise=0.574053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000268879 Jy
! Component: 100  -  total flux cleaned = 0.000617028 Jy
! Component: 150  -  total flux cleaned = 0.000757836 Jy
! Component: 200  -  total flux cleaned = 0.000757861 Jy
! Total flux subtracted in 200 components = 0.000757861 Jy
! Clean residual min=-0.004386 max=0.005401 Jy/beam
! Clean residual mean=0.000014 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.41181 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 93 components and 0.41181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060456Jy  sigma=1.291750
! Fit after  self-cal, rms=0.060437Jy  sigma=1.291573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.91266e-05 Jy
! Component: 100  -  total flux cleaned = 4.5257e-05 Jy
! Component: 150  -  total flux cleaned = 0.000115064 Jy
! Component: 200  -  total flux cleaned = 0.000157171 Jy
! Total flux subtracted in 200 components = 0.000157171 Jy
! Clean residual min=-0.004432 max=0.005361 Jy/beam
! Clean residual mean=0.000014 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.411967 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.411967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060419Jy  sigma=1.290951
! Fit after  self-cal, rms=0.060404Jy  sigma=1.290805
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060404Jy  sigma=1.290805
! Fit after  self-cal, rms=0.060405Jy  sigma=1.290742
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.156 mas, bmaj=9.723 mas, bpa=-6.972 degrees
! Estimated noise=0.657156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313266 Jy
! Component: 100  -  total flux cleaned = 0.00062384 Jy
! Component: 150  -  total flux cleaned = 0.000646416 Jy
! Component: 200  -  total flux cleaned = 0.000687373 Jy
! Total flux subtracted in 200 components = 0.000687373 Jy
! Clean residual min=-0.005777 max=0.007914 Jy/beam
! Clean residual mean=0.000025 rms=0.001997 Jy/beam
! Combined flux in latest and established models = 0.412654 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 103 components and 0.412654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060402Jy  sigma=1.290328
! Fit after  self-cal, rms=0.060386Jy  sigma=1.290158
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.54235e-05 Jy
! Component: 100  -  total flux cleaned = 0.000174394 Jy
! Component: 150  -  total flux cleaned = 0.000214142 Jy
! Component: 200  -  total flux cleaned = 0.000250093 Jy
! Total flux subtracted in 200 components = 0.000250093 Jy
! Clean residual min=-0.005855 max=0.007929 Jy/beam
! Clean residual mean=0.000024 rms=0.001997 Jy/beam
! Combined flux in latest and established models = 0.412904 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 107 components and 0.412904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060384Jy  sigma=1.289925
! Fit after  self-cal, rms=0.060373Jy  sigma=1.289822
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.713 mas, bmaj=7.525 mas, bpa=12.02 degrees
! Estimated noise=0.574179 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.713 x 7.525 at 12.02 degrees (North through East)
! Clean map  min=-0.0046322  max=0.31314 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.88 mas, bmaj=6.64 mas, bpa=15.35 degrees
! Estimated noise=0.803197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.241439 Jy
! Component: 100  -  total flux cleaned = 0.310993 Jy
! Component: 150  -  total flux cleaned = 0.343452 Jy
! Component: 200  -  total flux cleaned = 0.361954 Jy
! Total flux subtracted in 200 components = 0.361954 Jy
! Clean residual min=-0.006813 max=0.009410 Jy/beam
! Clean residual mean=0.000027 rms=0.001893 Jy/beam
! Combined flux in latest and established models = 0.361954 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.361954 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.713 mas, bmaj=7.525 mas, bpa=12.02 degrees
! Estimated noise=0.574179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161768 Jy
! Component: 100  -  total flux cleaned = 0.0261769 Jy
! Component: 150  -  total flux cleaned = 0.0330557 Jy
! Component: 200  -  total flux cleaned = 0.037972 Jy
! Total flux subtracted in 200 components = 0.037972 Jy
! Clean residual min=-0.004946 max=0.005102 Jy/beam
! Clean residual mean=0.000022 rms=0.001423 Jy/beam
! Combined flux in latest and established models = 0.399926 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 103 components and 0.399926 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.156 mas, bmaj=9.723 mas, bpa=-6.972 degrees
! Estimated noise=0.657156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00516353 Jy
! Component: 100  -  total flux cleaned = 0.00829007 Jy
! Component: 150  -  total flux cleaned = 0.0103027 Jy
! Component: 200  -  total flux cleaned = 0.0116126 Jy
! Total flux subtracted in 200 components = 0.0116126 Jy
! Clean residual min=-0.006020 max=0.007876 Jy/beam
! Clean residual mean=0.000026 rms=0.002003 Jy/beam
! Combined flux in latest and established models = 0.411538 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000856177 Jy
! Component: 100  -  total flux cleaned = 0.00141868 Jy
! Component: 150  -  total flux cleaned = 0.00155343 Jy
! Component: 200  -  total flux cleaned = 0.0015837 Jy
! Total flux subtracted in 200 components = 0.0015837 Jy
! Clean residual min=-0.005937 max=0.007972 Jy/beam
! Clean residual mean=0.000024 rms=0.001994 Jy/beam
! Combined flux in latest and established models = 0.413122 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 150 components and 0.413122 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.713 mas, bmaj=7.525 mas, bpa=12.02 degrees
! Estimated noise=0.574179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.53848e-05 Jy
! Component: 100  -  total flux cleaned = -2.14571e-05 Jy
! Component: 150  -  total flux cleaned = 1.08453e-05 Jy
! Component: 200  -  total flux cleaned = -1.6818e-05 Jy
! Total flux subtracted in 200 components = -1.6818e-05 Jy
! Clean residual min=-0.004811 max=0.005330 Jy/beam
! Clean residual mean=0.000013 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.413105 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 160 components and 0.413105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060437Jy  sigma=1.290942
! Fit after  self-cal, rms=0.060403Jy  sigma=1.290410
wmodel /J0253+3835_S_map.mod
! wmodel: Unable to open new model file: /J0253+3835_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0253+3835_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.713 x 7.525 at 12.02 degrees (North through East)
! Clean map  min=-0.0045767  max=0.31302 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0253+3835_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.313016 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00131562 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.26091 1.26091 2.52182 5.04364 10.0873 20.1746 40.3492 80.6983
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0039 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.313 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  237.923 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0253+3835_S_dfm.log closed on Thu May 19 18:21:13 2016