! Started logfile: /scr/pima/bg219e_uvs/J0252+1718_X_dfm.log on Thu May 19 18:21:06 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0252+1718_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0252+1718_X_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.885701 visibilities/baseline/integration-bin.
! Found source: J0252+1718
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23340 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0252+1718_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.037292Jy  sigma=24.301218
! Fit after  self-cal, rms=0.747615Jy  sigma=17.456319
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8655 mas, bmaj=2.174 mas, bpa=20.36 degrees
! Estimated noise=0.476943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.186733 Jy
! Component: 100  -  total flux cleaned = 0.258607 Jy
! Total flux subtracted in 100 components = 0.258607 Jy
! Clean residual min=-0.011126 max=0.030967 Jy/beam
! Clean residual mean=-0.000015 rms=0.003284 Jy/beam
! Combined flux in latest and established models = 0.258607 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.258607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082635Jy  sigma=1.895101
! Fit after  self-cal, rms=0.080885Jy  sigma=1.858270
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0356876 Jy
! Component: 100  -  total flux cleaned = 0.0524222 Jy
! Total flux subtracted in 100 components = 0.0524222 Jy
! Clean residual min=-0.004980 max=0.007740 Jy/beam
! Clean residual mean=-0.000005 rms=0.001224 Jy/beam
! Combined flux in latest and established models = 0.311029 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.311029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061371Jy  sigma=1.375445
! Fit after  self-cal, rms=0.060806Jy  sigma=1.363109
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102074 Jy
! Component: 100  -  total flux cleaned = 0.0151141 Jy
! Total flux subtracted in 100 components = 0.0151141 Jy
! Clean residual min=-0.003300 max=0.003723 Jy/beam
! Clean residual mean=-0.000003 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.326143 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 16 components and 0.326143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058754Jy  sigma=1.312405
! Fit after  self-cal, rms=0.058690Jy  sigma=1.311052
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.087 mas, bmaj=2.301 mas, bpa=15.74 degrees
! Estimated noise=0.211941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00486906 Jy
! Component: 100  -  total flux cleaned = 0.007028 Jy
! Component: 150  -  total flux cleaned = 0.00831506 Jy
! Component: 200  -  total flux cleaned = 0.00916287 Jy
! Total flux subtracted in 200 components = 0.00916287 Jy
! Clean residual min=-0.002040 max=0.002967 Jy/beam
! Clean residual mean=-0.000002 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.335306 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.335306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058322Jy  sigma=1.302157
! Fit after  self-cal, rms=0.058313Jy  sigma=1.301946
! Inverting map 
! Added new window around map position (-1.8, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00266488 Jy
! Component: 100  -  total flux cleaned = 0.00403743 Jy
! Component: 150  -  total flux cleaned = 0.00464283 Jy
! Component: 200  -  total flux cleaned = 0.00511123 Jy
! Total flux subtracted in 200 components = 0.00511123 Jy
! Clean residual min=-0.001940 max=0.001650 Jy/beam
! Clean residual mean=-0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.340417 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 37 components and 0.340417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058179Jy  sigma=1.298671
! Fit after  self-cal, rms=0.058164Jy  sigma=1.298358
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.087 x 2.301 at 15.74 degrees (North through East)
! Clean map  min=-0.0016201  max=0.24853 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.01     KP        1.02     
!   LA        1.02     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.00     NL        1.00     OV        1.01     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        1.01     
!   LA        0.99     NL        1.01     OV        1.01     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        1.01     
!   LA        1.00     NL        1.00     OV        1.01     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        1.00     
!   LA        1.00     NL        1.01     OV        0.99     PT        1.02     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        1.00     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.98     
!   SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.01     PT        0.97     
!   SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.01     NL        1.02     OV        0.99     PT        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.02     KP        1.00     
!   LA        1.01     NL        1.00     OV        0.99     PT        0.98     
!   SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.00     
!   LA        0.99     NL        1.00     OV        1.02     PT        0.99     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.058164Jy  sigma=1.298358
! Fit after  self-cal, rms=0.057709Jy  sigma=1.292854
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.084 mas, bmaj=2.304 mas, bpa=15.89 degrees
! Estimated noise=0.2115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000143461 Jy
! Component: 100  -  total flux cleaned = -0.00022291 Jy
! Component: 150  -  total flux cleaned = -0.000288126 Jy
! Component: 200  -  total flux cleaned = -0.000325236 Jy
! Total flux subtracted in 200 components = -0.000325236 Jy
! Clean residual min=-0.001508 max=0.001352 Jy/beam
! Clean residual mean=0.000000 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.340092 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 59 components and 0.340092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057689Jy  sigma=1.292380
! Fit after  self-cal, rms=0.057688Jy  sigma=1.292349
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057688Jy  sigma=1.292349
! Fit after  self-cal, rms=0.057598Jy  sigma=1.289982
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.083 mas, bmaj=2.304 mas, bpa=15.94 degrees
! Estimated noise=0.211365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000444972 Jy
! Component: 100  -  total flux cleaned = -0.000637837 Jy
! Component: 150  -  total flux cleaned = -0.000696808 Jy
! Component: 200  -  total flux cleaned = -0.000710008 Jy
! Total flux subtracted in 200 components = -0.000710008 Jy
! Clean residual min=-0.001304 max=0.001315 Jy/beam
! Clean residual mean=-0.000000 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.339382 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 73 components and 0.339382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057588Jy  sigma=1.289756
! Fit after  self-cal, rms=0.057589Jy  sigma=1.289742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.60118e-05 Jy
! Component: 100  -  total flux cleaned = -9.70848e-05 Jy
! Component: 150  -  total flux cleaned = -8.63432e-05 Jy
! Component: 200  -  total flux cleaned = -9.54224e-05 Jy
! Total flux subtracted in 200 components = -9.54224e-05 Jy
! Clean residual min=-0.001275 max=0.001317 Jy/beam
! Clean residual mean=-0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.339287 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 78 components and 0.339287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057585Jy  sigma=1.289651
! Fit after  self-cal, rms=0.057585Jy  sigma=1.289647
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057585Jy  sigma=1.289647
! Fit after  self-cal, rms=0.057598Jy  sigma=1.289595
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.084 mas, bmaj=2.305 mas, bpa=15.95 degrees
! Estimated noise=0.21133 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000420512 Jy
! Component: 100  -  total flux cleaned = -0.000579227 Jy
! Component: 150  -  total flux cleaned = -0.00063719 Jy
! Component: 200  -  total flux cleaned = -0.00065439 Jy
! Total flux subtracted in 200 components = -0.00065439 Jy
! Clean residual min=-0.001240 max=0.001269 Jy/beam
! Clean residual mean=-0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.338632 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 83 components and 0.338632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057594Jy  sigma=1.289502
! Fit after  self-cal, rms=0.057594Jy  sigma=1.289498
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.35763e-05 Jy
! Component: 100  -  total flux cleaned = -4.37927e-05 Jy
! Component: 150  -  total flux cleaned = -5.09218e-05 Jy
! Component: 200  -  total flux cleaned = -5.0888e-05 Jy
! Total flux subtracted in 200 components = -5.0888e-05 Jy
! Clean residual min=-0.001223 max=0.001261 Jy/beam
! Clean residual mean=-0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.338581 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.338581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057592Jy  sigma=1.289454
! Fit after  self-cal, rms=0.057592Jy  sigma=1.289453
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057592Jy  sigma=1.289453
! Fit after  self-cal, rms=0.057608Jy  sigma=1.289423
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.154 mas, bmaj=2.878 mas, bpa=0.7986 degrees
! Estimated noise=0.253508 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.29281e-05 Jy
! Component: 100  -  total flux cleaned = -0.000139433 Jy
! Component: 150  -  total flux cleaned = -0.000215396 Jy
! Component: 200  -  total flux cleaned = -0.000259725 Jy
! Total flux subtracted in 200 components = -0.000259725 Jy
! Clean residual min=-0.001252 max=0.001485 Jy/beam
! Clean residual mean=-0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.338321 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 94 components and 0.338322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057608Jy  sigma=1.289409
! Fit after  self-cal, rms=0.057607Jy  sigma=1.289379
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.92868e-05 Jy
! Component: 100  -  total flux cleaned = -6.77267e-05 Jy
! Component: 150  -  total flux cleaned = -6.04852e-05 Jy
! Component: 200  -  total flux cleaned = -4.67735e-05 Jy
! Total flux subtracted in 200 components = -4.67735e-05 Jy
! Clean residual min=-0.001250 max=0.001477 Jy/beam
! Clean residual mean=-0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.338275 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 99 components and 0.338275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057609Jy  sigma=1.289406
! Fit after  self-cal, rms=0.057608Jy  sigma=1.289398
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.084 mas, bmaj=2.305 mas, bpa=15.94 degrees
! Estimated noise=0.211316 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.084 x 2.305 at 15.94 degrees (North through East)
! Clean map  min=-0.0010921  max=0.24803 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8617 mas, bmaj=2.18 mas, bpa=20.49 degrees
! Estimated noise=0.475754 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187942 Jy
! Component: 100  -  total flux cleaned = 0.263408 Jy
! Component: 150  -  total flux cleaned = 0.297883 Jy
! Component: 200  -  total flux cleaned = 0.314217 Jy
! Total flux subtracted in 200 components = 0.314217 Jy
! Clean residual min=-0.003650 max=0.007479 Jy/beam
! Clean residual mean=-0.000005 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.314216 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.314216 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.084 mas, bmaj=2.305 mas, bpa=15.94 degrees
! Estimated noise=0.211316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106169 Jy
! Component: 100  -  total flux cleaned = 0.0154073 Jy
! Component: 150  -  total flux cleaned = 0.0181149 Jy
! Component: 200  -  total flux cleaned = 0.019706 Jy
! Total flux subtracted in 200 components = 0.019706 Jy
! Clean residual min=-0.001682 max=0.001525 Jy/beam
! Clean residual mean=-0.000002 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.333923 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 31 components and 0.333923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.154 mas, bmaj=2.878 mas, bpa=0.7986 degrees
! Estimated noise=0.253508 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174557 Jy
! Component: 100  -  total flux cleaned = 0.00226716 Jy
! Component: 150  -  total flux cleaned = 0.00270182 Jy
! Component: 200  -  total flux cleaned = 0.00296271 Jy
! Total flux subtracted in 200 components = 0.00296271 Jy
! Clean residual min=-0.001412 max=0.001643 Jy/beam
! Clean residual mean=-0.000002 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.336885 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149588 Jy
! Component: 100  -  total flux cleaned = 0.000257746 Jy
! Component: 150  -  total flux cleaned = 0.000334501 Jy
! Component: 200  -  total flux cleaned = 0.00042151 Jy
! Total flux subtracted in 200 components = 0.00042151 Jy
! Clean residual min=-0.001341 max=0.001578 Jy/beam
! Clean residual mean=-0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.337307 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 68 components and 0.337307 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.084 mas, bmaj=2.305 mas, bpa=15.94 degrees
! Estimated noise=0.211316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000353818 Jy
! Component: 100  -  total flux cleaned = -0.000460103 Jy
! Component: 150  -  total flux cleaned = -0.00052019 Jy
! Component: 200  -  total flux cleaned = -0.000545838 Jy
! Total flux subtracted in 200 components = -0.000545838 Jy
! Clean residual min=-0.001236 max=0.001323 Jy/beam
! Clean residual mean=-0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.336761 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.336761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057636Jy  sigma=1.289991
! Fit after  self-cal, rms=0.057636Jy  sigma=1.289916
wmodel /J0252+1718_X_map.mod
! wmodel: Unable to open new model file: /J0252+1718_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0252+1718_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.084 x 2.305 at 15.94 degrees (North through East)
! Clean map  min=-0.0011914  max=0.2481 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0252+1718_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.248104 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00031029 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.375193 0.375193 0.750385 1.50077 3.00154 6.00308 12.0062 24.0123 48.0247 96.0493
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.248 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  799.589 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0252+1718_X_dfm.log closed on Thu May 19 18:21:09 2016