! Started logfile: /scr/pima/bg219e_uvs/J0247+3254_X_dfm.log on Thu May 19 18:20:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0247+3254_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0247+3254_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.719907 visibilities/baseline/integration-bin.
! Found source: J0247+3254
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11196 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0247+3254_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.067971Jy  sigma=24.032512
! Fit after  self-cal, rms=0.649629Jy  sigma=14.453895
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8942 mas, bmaj=1.877 mas, bpa=22.95 degrees
! Estimated noise=0.676692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.256466 Jy
! Component: 100  -  total flux cleaned = 0.337285 Jy
! Total flux subtracted in 100 components = 0.337285 Jy
! Clean residual min=-0.012611 max=0.036698 Jy/beam
! Clean residual mean=-0.000007 rms=0.004406 Jy/beam
! Combined flux in latest and established models = 0.337285 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.337285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094617Jy  sigma=2.094443
! Fit after  self-cal, rms=0.094502Jy  sigma=2.091249
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0414246 Jy
! Component: 100  -  total flux cleaned = 0.0636562 Jy
! Total flux subtracted in 100 components = 0.0636562 Jy
! Clean residual min=-0.005962 max=0.010811 Jy/beam
! Clean residual mean=-0.000002 rms=0.001790 Jy/beam
! Combined flux in latest and established models = 0.400941 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.400941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068674Jy  sigma=1.459144
! Fit after  self-cal, rms=0.068556Jy  sigma=1.455702
! Inverting map 
! Added new window around map position (-1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130556 Jy
! Component: 100  -  total flux cleaned = 0.0207719 Jy
! Total flux subtracted in 100 components = 0.0207719 Jy
! Clean residual min=-0.004703 max=0.005936 Jy/beam
! Clean residual mean=-0.000001 rms=0.001225 Jy/beam
! Combined flux in latest and established models = 0.421713 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.421713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065093Jy  sigma=1.366390
! Fit after  self-cal, rms=0.065075Jy  sigma=1.365663
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.15 mas, bmaj=2.036 mas, bpa=21.58 degrees
! Estimated noise=0.326613 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00811476 Jy
! Component: 100  -  total flux cleaned = 0.0127492 Jy
! Component: 150  -  total flux cleaned = 0.0158231 Jy
! Component: 200  -  total flux cleaned = 0.0179777 Jy
! Total flux subtracted in 200 components = 0.0179777 Jy
! Clean residual min=-0.003582 max=0.004440 Jy/beam
! Clean residual mean=-0.000002 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 0.439691 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 38 components and 0.439691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064101Jy  sigma=1.338536
! Fit after  self-cal, rms=0.064094Jy  sigma=1.338174
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.15 x 2.036 at 21.58 degrees (North through East)
! Clean map  min=-0.0032593  max=0.35521 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        1.00     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.01     
!   LA        1.00     NL        1.01     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.98     NL        0.99     OV        0.97     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        1.01     
!   LA        0.99     NL        1.00     OV        0.97     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.99     NL        1.01     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.00     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.99     
!   LA        1.00     NL        1.03     OV        0.97     PT        1.01     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.99     NL        1.02     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.02     KP        1.00     
!   LA        0.98     NL        1.02     OV        0.98     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        1.00     
!   LA        1.01     NL        1.00     OV        0.98     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        1.02     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.05     KP        1.02     
!   LA        0.99     NL        1.01     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.064094Jy  sigma=1.338174
! Fit after  self-cal, rms=0.063766Jy  sigma=1.324462
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.045 mas, bpa=21.64 degrees
! Estimated noise=0.32568 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00172622 Jy
! Component: 100  -  total flux cleaned = -0.00255854 Jy
! Component: 150  -  total flux cleaned = -0.00272962 Jy
! Component: 200  -  total flux cleaned = -0.00286515 Jy
! Total flux subtracted in 200 components = -0.00286515 Jy
! Clean residual min=-0.003631 max=0.003104 Jy/beam
! Clean residual mean=-0.000000 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.436826 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.436826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063707Jy  sigma=1.323504
! Fit after  self-cal, rms=0.063709Jy  sigma=1.323434
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063709Jy  sigma=1.323434
! Fit after  self-cal, rms=0.063457Jy  sigma=1.311164
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.148 mas, bmaj=2.049 mas, bpa=21.71 degrees
! Estimated noise=0.325706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000233828 Jy
! Component: 100  -  total flux cleaned = -0.000467769 Jy
! Component: 150  -  total flux cleaned = -0.000626314 Jy
! Component: 200  -  total flux cleaned = -0.000693647 Jy
! Total flux subtracted in 200 components = -0.000693647 Jy
! Clean residual min=-0.002209 max=0.002213 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.436132 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 58 components and 0.436132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063435Jy  sigma=1.310692
! Fit after  self-cal, rms=0.063445Jy  sigma=1.310649
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.71808e-05 Jy
! Component: 100  -  total flux cleaned = -0.000106806 Jy
! Component: 150  -  total flux cleaned = -0.000133477 Jy
! Component: 200  -  total flux cleaned = -0.000158076 Jy
! Total flux subtracted in 200 components = -0.000158076 Jy
! Clean residual min=-0.002189 max=0.002172 Jy/beam
! Clean residual mean=-0.000001 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.435974 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 62 components and 0.435974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063439Jy  sigma=1.310503
! Fit after  self-cal, rms=0.063438Jy  sigma=1.310492
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063438Jy  sigma=1.310492
! Fit after  self-cal, rms=0.063453Jy  sigma=1.310392
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.05 mas, bpa=21.73 degrees
! Estimated noise=0.325565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000424306 Jy
! Component: 100  -  total flux cleaned = -0.000516802 Jy
! Component: 150  -  total flux cleaned = -0.000580641 Jy
! Component: 200  -  total flux cleaned = -0.000626546 Jy
! Total flux subtracted in 200 components = -0.000626546 Jy
! Clean residual min=-0.002161 max=0.002146 Jy/beam
! Clean residual mean=-0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.435348 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 67 components and 0.435348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063445Jy  sigma=1.310245
! Fit after  self-cal, rms=0.063444Jy  sigma=1.310233
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.33784e-05 Jy
! Component: 100  -  total flux cleaned = -0.000116252 Jy
! Component: 150  -  total flux cleaned = -0.000135842 Jy
! Component: 200  -  total flux cleaned = -0.000163121 Jy
! Total flux subtracted in 200 components = -0.000163121 Jy
! Clean residual min=-0.002149 max=0.002115 Jy/beam
! Clean residual mean=-0.000001 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.435185 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.435185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063441Jy  sigma=1.310161
! Fit after  self-cal, rms=0.063440Jy  sigma=1.310153
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063440Jy  sigma=1.310153
! Fit after  self-cal, rms=0.063447Jy  sigma=1.310114
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.38 mas, bmaj=2.579 mas, bpa=-21.27 degrees
! Estimated noise=0.385279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00049698 Jy
! Component: 100  -  total flux cleaned = -0.000550401 Jy
! Component: 150  -  total flux cleaned = -0.000573694 Jy
! Component: 200  -  total flux cleaned = -0.000574154 Jy
! Total flux subtracted in 200 components = -0.000574154 Jy
! Clean residual min=-0.002638 max=0.002364 Jy/beam
! Clean residual mean=-0.000003 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.43461 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 72 components and 0.43461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063446Jy  sigma=1.310067
! Fit after  self-cal, rms=0.063445Jy  sigma=1.310044
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.03346e-05 Jy
! Component: 100  -  total flux cleaned = -2.7069e-05 Jy
! Component: 150  -  total flux cleaned = -1.26936e-05 Jy
! Component: 200  -  total flux cleaned = -6.26366e-06 Jy
! Total flux subtracted in 200 components = -6.26366e-06 Jy
! Clean residual min=-0.002621 max=0.002340 Jy/beam
! Clean residual mean=-0.000003 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.434604 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 74 components and 0.434604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063445Jy  sigma=1.310028
! Fit after  self-cal, rms=0.063444Jy  sigma=1.310011
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.051 mas, bpa=21.74 degrees
! Estimated noise=0.325464 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.147 x 2.051 at 21.74 degrees (North through East)
! Clean map  min=-0.0020685  max=0.35402 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8917 mas, bmaj=1.889 mas, bpa=23.05 degrees
! Estimated noise=0.676172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.256293 Jy
! Component: 100  -  total flux cleaned = 0.33786 Jy
! Component: 150  -  total flux cleaned = 0.378921 Jy
! Component: 200  -  total flux cleaned = 0.400876 Jy
! Total flux subtracted in 200 components = 0.400876 Jy
! Clean residual min=-0.005462 max=0.010659 Jy/beam
! Clean residual mean=-0.000002 rms=0.001558 Jy/beam
! Combined flux in latest and established models = 0.400876 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.400876 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.051 mas, bpa=21.74 degrees
! Estimated noise=0.325464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161032 Jy
! Component: 100  -  total flux cleaned = 0.0237093 Jy
! Component: 150  -  total flux cleaned = 0.0278822 Jy
! Component: 200  -  total flux cleaned = 0.0303787 Jy
! Total flux subtracted in 200 components = 0.0303787 Jy
! Clean residual min=-0.002739 max=0.002154 Jy/beam
! Clean residual mean=-0.000002 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.431255 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.431255 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.38 mas, bmaj=2.579 mas, bpa=-21.27 degrees
! Estimated noise=0.385279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194093 Jy
! Component: 100  -  total flux cleaned = 0.00275546 Jy
! Component: 150  -  total flux cleaned = 0.00292124 Jy
! Component: 200  -  total flux cleaned = 0.00303498 Jy
! Total flux subtracted in 200 components = 0.00303498 Jy
! Clean residual min=-0.002891 max=0.002429 Jy/beam
! Clean residual mean=-0.000003 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.43429 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000113738 Jy
! Component: 100  -  total flux cleaned = 0.000177583 Jy
! Component: 150  -  total flux cleaned = 0.000232638 Jy
! Component: 200  -  total flux cleaned = 0.00028107 Jy
! Total flux subtracted in 200 components = 0.00028107 Jy
! Clean residual min=-0.002785 max=0.002412 Jy/beam
! Clean residual mean=-0.000003 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.434571 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 53 components and 0.434571 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.051 mas, bpa=21.74 degrees
! Estimated noise=0.325464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.29103e-06 Jy
! Component: 100  -  total flux cleaned = -1.67579e-05 Jy
! Component: 150  -  total flux cleaned = -1.61091e-05 Jy
! Component: 200  -  total flux cleaned = -1.67524e-05 Jy
! Total flux subtracted in 200 components = -1.67524e-05 Jy
! Clean residual min=-0.002133 max=0.002090 Jy/beam
! Clean residual mean=-0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.434554 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 0.434554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063445Jy  sigma=1.310131
! Fit after  self-cal, rms=0.063441Jy  sigma=1.310003
wmodel /J0247+3254_X_map.mod
! wmodel: Unable to open new model file: /J0247+3254_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0247+3254_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.147 x 2.051 at 21.74 degrees (North through East)
! Clean map  min=-0.0020498  max=0.35421 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0247+3254_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.354206 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000514526 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.435785 0.435785 0.871571 1.74314 3.48628 6.97257 13.9451 27.8903 55.7805
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.354 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  688.412 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0247+3254_X_dfm.log closed on Thu May 19 18:21:00 2016