! Started logfile: /scr/pima/bg219e_uvs/J0240+1848_X_dfm.log on Thu May 19 18:20:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0240+1848_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0240+1848_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.869048 visibilities/baseline/integration-bin.
! Found source: J0240+1848
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10512 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0240+1848_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028091Jy  sigma=24.835283
! Fit after  self-cal, rms=0.818326Jy  sigma=19.681075
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8878 mas, bmaj=2.155 mas, bpa=18.37 degrees
! Estimated noise=0.547986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128777 Jy
! Component: 100  -  total flux cleaned = 0.186184 Jy
! Total flux subtracted in 100 components = 0.186184 Jy
! Clean residual min=-0.008825 max=0.027073 Jy/beam
! Clean residual mean=-0.000031 rms=0.002999 Jy/beam
! Combined flux in latest and established models = 0.186184 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.186184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083990Jy  sigma=1.984837
! Fit after  self-cal, rms=0.082987Jy  sigma=1.966076
! Inverting map 
! Added new window around map position (-1, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0322435 Jy
! Component: 100  -  total flux cleaned = 0.049668 Jy
! Total flux subtracted in 100 components = 0.049668 Jy
! Clean residual min=-0.005206 max=0.008879 Jy/beam
! Clean residual mean=-0.000016 rms=0.001477 Jy/beam
! Combined flux in latest and established models = 0.235852 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.235852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063966Jy  sigma=1.479357
! Fit after  self-cal, rms=0.063671Jy  sigma=1.473772
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107296 Jy
! Component: 100  -  total flux cleaned = 0.0173499 Jy
! Total flux subtracted in 100 components = 0.0173499 Jy
! Clean residual min=-0.004763 max=0.006095 Jy/beam
! Clean residual mean=-0.000011 rms=0.001191 Jy/beam
! Combined flux in latest and established models = 0.253202 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.253202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060644Jy  sigma=1.395495
! Fit after  self-cal, rms=0.060582Jy  sigma=1.394438
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.128 mas, bmaj=2.271 mas, bpa=16.8 degrees
! Estimated noise=0.322065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104172 Jy
! Component: 100  -  total flux cleaned = 0.0173485 Jy
! Component: 150  -  total flux cleaned = 0.0221727 Jy
! Component: 200  -  total flux cleaned = 0.0256938 Jy
! Total flux subtracted in 200 components = 0.0256938 Jy
! Clean residual min=-0.003600 max=0.004794 Jy/beam
! Clean residual mean=-0.000010 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 0.278896 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 53 components and 0.278896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058451Jy  sigma=1.339046
! Fit after  self-cal, rms=0.058325Jy  sigma=1.335474
! Inverting map 
! Added new window around map position (4.4, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00521873 Jy
! Component: 100  -  total flux cleaned = 0.00835688 Jy
! Component: 150  -  total flux cleaned = 0.0107757 Jy
! Component: 200  -  total flux cleaned = 0.0127464 Jy
! Total flux subtracted in 200 components = 0.0127464 Jy
! Clean residual min=-0.002611 max=0.002718 Jy/beam
! Clean residual mean=-0.000005 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.291642 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 88 components and 0.291642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057781Jy  sigma=1.321488
! Fit after  self-cal, rms=0.057738Jy  sigma=1.320249
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.128 x 2.271 at 16.8 degrees (North through East)
! Clean map  min=-0.002475  max=0.18266 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.05     KP        1.00     
!   LA        0.97     NL        1.00     OV        1.01     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.04     KP        0.97     
!   LA        0.96     NL        0.99     OV        0.99     PT        0.99     
!   SC        0.91     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.00     KP        1.01     
!   LA        0.98     NL        1.03     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.98     NL        0.97     OV        1.02     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.04     KP        1.01     
!   LA        0.98     NL        0.98     OV        1.01     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.02     OV        1.00     PT        1.01     
!   SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.03     KP        1.00     
!   LA        0.99     NL        1.03     OV        1.00     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.00     KP        1.02     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.99     NL        0.99     OV        1.02     PT        1.00     
!   SC        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.06     KP        1.02     
!   LA        0.98     NL        1.00     OV        0.99     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.04     KP        1.00     
!   LA        0.98     NL        1.05     OV        0.99     PT        1.00     
!   SC        0.93     
! 
! 
! Fit before self-cal, rms=0.057738Jy  sigma=1.320249
! Fit after  self-cal, rms=0.057422Jy  sigma=1.313028
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.125 mas, bmaj=2.281 mas, bpa=17.07 degrees
! Estimated noise=0.320283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019328 Jy
! Component: 100  -  total flux cleaned = 0.00198973 Jy
! Component: 150  -  total flux cleaned = 0.00203822 Jy
! Component: 200  -  total flux cleaned = 0.00207803 Jy
! Total flux subtracted in 200 components = 0.00207803 Jy
! Clean residual min=-0.002424 max=0.002030 Jy/beam
! Clean residual mean=-0.000000 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.29372 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 117 components and 0.29372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057329Jy  sigma=1.310721
! Fit after  self-cal, rms=0.057332Jy  sigma=1.310527
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057332Jy  sigma=1.310527
! Fit after  self-cal, rms=0.057091Jy  sigma=1.306213
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.125 mas, bmaj=2.283 mas, bpa=16.98 degrees
! Estimated noise=0.319863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000487629 Jy
! Component: 100  -  total flux cleaned = 0.000523332 Jy
! Component: 150  -  total flux cleaned = 0.000521422 Jy
! Component: 200  -  total flux cleaned = 0.000546236 Jy
! Total flux subtracted in 200 components = 0.000546236 Jy
! Clean residual min=-0.002277 max=0.002022 Jy/beam
! Clean residual mean=-0.000000 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.294267 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 130 components and 0.294266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057056Jy  sigma=1.305275
! Fit after  self-cal, rms=0.057055Jy  sigma=1.305192
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229678 Jy
! Component: 100  -  total flux cleaned = 0.000351106 Jy
! Component: 150  -  total flux cleaned = 0.00041745 Jy
! Component: 200  -  total flux cleaned = 0.000458403 Jy
! Total flux subtracted in 200 components = 0.000458403 Jy
! Clean residual min=-0.002240 max=0.002049 Jy/beam
! Clean residual mean=-0.000000 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.294725 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 142 components and 0.294725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057038Jy  sigma=1.304781
! Fit after  self-cal, rms=0.057037Jy  sigma=1.304759
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057037Jy  sigma=1.304759
! Fit after  self-cal, rms=0.057017Jy  sigma=1.304717
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.125 mas, bmaj=2.283 mas, bpa=16.96 degrees
! Estimated noise=0.319722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138554 Jy
! Component: 100  -  total flux cleaned = -0.000137557 Jy
! Component: 150  -  total flux cleaned = -0.000100412 Jy
! Component: 200  -  total flux cleaned = -6.52699e-05 Jy
! Total flux subtracted in 200 components = -6.52699e-05 Jy
! Clean residual min=-0.002217 max=0.002049 Jy/beam
! Clean residual mean=-0.000000 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.29466 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 148 components and 0.29466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057005Jy  sigma=1.304418
! Fit after  self-cal, rms=0.057004Jy  sigma=1.304400
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.88915e-05 Jy
! Component: 100  -  total flux cleaned = 0.000138806 Jy
! Component: 150  -  total flux cleaned = 0.000170761 Jy
! Component: 200  -  total flux cleaned = 0.000200856 Jy
! Total flux subtracted in 200 components = 0.000200856 Jy
! Clean residual min=-0.002199 max=0.002057 Jy/beam
! Clean residual mean=-0.000000 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.29486 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 151 components and 0.29486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056996Jy  sigma=1.304201
! Fit after  self-cal, rms=0.056995Jy  sigma=1.304188
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056995Jy  sigma=1.304188
! Fit after  self-cal, rms=0.056997Jy  sigma=1.304180
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.211 mas, bmaj=2.826 mas, bpa=3.37 degrees
! Estimated noise=0.377545 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000496071 Jy
! Component: 100  -  total flux cleaned = -0.000557376 Jy
! Component: 150  -  total flux cleaned = -0.000616778 Jy
! Component: 200  -  total flux cleaned = -0.000667816 Jy
! Total flux subtracted in 200 components = -0.000667816 Jy
! Clean residual min=-0.002638 max=0.002668 Jy/beam
! Clean residual mean=-0.000000 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.294193 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 172 components and 0.294193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056993Jy  sigma=1.304134
! Fit after  self-cal, rms=0.056993Jy  sigma=1.304114
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.94585e-05 Jy
! Component: 100  -  total flux cleaned = 3.80706e-05 Jy
! Component: 150  -  total flux cleaned = 2.74604e-05 Jy
! Component: 200  -  total flux cleaned = 1.75968e-05 Jy
! Total flux subtracted in 200 components = 1.75968e-05 Jy
! Clean residual min=-0.002648 max=0.002692 Jy/beam
! Clean residual mean=-0.000000 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.29421 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 186 components and 0.29421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056992Jy  sigma=1.304095
! Fit after  self-cal, rms=0.056992Jy  sigma=1.304086
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.125 mas, bmaj=2.283 mas, bpa=16.96 degrees
! Estimated noise=0.319715 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.125 x 2.283 at 16.96 degrees (North through East)
! Clean map  min=-0.0021482  max=0.18152 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8841 mas, bmaj=2.169 mas, bpa=18.49 degrees
! Estimated noise=0.543541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12825 Jy
! Component: 100  -  total flux cleaned = 0.18672 Jy
! Component: 150  -  total flux cleaned = 0.218086 Jy
! Component: 200  -  total flux cleaned = 0.235207 Jy
! Total flux subtracted in 200 components = 0.235207 Jy
! Clean residual min=-0.005019 max=0.008532 Jy/beam
! Clean residual mean=-0.000013 rms=0.001453 Jy/beam
! Combined flux in latest and established models = 0.235207 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.235207 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.125 mas, bmaj=2.283 mas, bpa=16.96 degrees
! Estimated noise=0.319715 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167915 Jy
! Component: 100  -  total flux cleaned = 0.0278354 Jy
! Component: 150  -  total flux cleaned = 0.0356406 Jy
! Component: 200  -  total flux cleaned = 0.0414185 Jy
! Total flux subtracted in 200 components = 0.0414185 Jy
! Clean residual min=-0.003151 max=0.003457 Jy/beam
! Clean residual mean=-0.000008 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.276625 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 42 components and 0.276625 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.211 mas, bmaj=2.826 mas, bpa=3.37 degrees
! Estimated noise=0.377545 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00650797 Jy
! Component: 100  -  total flux cleaned = 0.0105303 Jy
! Component: 150  -  total flux cleaned = 0.01323 Jy
! Component: 200  -  total flux cleaned = 0.0151619 Jy
! Total flux subtracted in 200 components = 0.0151619 Jy
! Clean residual min=-0.002859 max=0.002427 Jy/beam
! Clean residual mean=-0.000003 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.291787 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133136 Jy
! Component: 100  -  total flux cleaned = 0.00205023 Jy
! Component: 150  -  total flux cleaned = 0.00262641 Jy
! Component: 200  -  total flux cleaned = 0.00283683 Jy
! Total flux subtracted in 200 components = 0.00283683 Jy
! Clean residual min=-0.002617 max=0.002659 Jy/beam
! Clean residual mean=-0.000000 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.294624 Jy
! Adding 93 model components to the UV plane model.
! The established model now contains 119 components and 0.294624 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.125 mas, bmaj=2.283 mas, bpa=16.96 degrees
! Estimated noise=0.319715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000365173 Jy
! Component: 100  -  total flux cleaned = -0.000448652 Jy
! Component: 150  -  total flux cleaned = -0.000519136 Jy
! Component: 200  -  total flux cleaned = -0.000425992 Jy
! Total flux subtracted in 200 components = -0.000425992 Jy
! Clean residual min=-0.002288 max=0.002018 Jy/beam
! Clean residual mean=-0.000000 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.294198 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 137 components and 0.294198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057052Jy  sigma=1.305360
! Fit after  self-cal, rms=0.057049Jy  sigma=1.305137
wmodel /J0240+1848_X_map.mod
! wmodel: Unable to open new model file: /J0240+1848_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0240+1848_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.125 x 2.283 at 16.96 degrees (North through East)
! Clean map  min=-0.0021108  max=0.18196 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0240+1848_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.181965 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00051181 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.843807 0.843807 1.68761 3.37523 6.75045 13.5009 27.0018 54.0036
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.181 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  355.531 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0240+1848_X_dfm.log closed on Thu May 19 18:20:52 2016