! Started logfile: /scr/pima/bg219e_uvs/J0237+2848_X_dfm.log on Thu May 19 18:20:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0237+2848_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0237+2848_X_uva.fits
! AN table 1: 51 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.934641 visibilities/baseline/integration-bin.
! Found source: J0237+2848
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20592 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0237+2848_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.457181Jy  sigma=30.439194
! Fit after  self-cal, rms=1.278400Jy  sigma=14.718019
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8672 mas, bmaj=1.87 mas, bpa=26.71 degrees
! Estimated noise=1.13476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.48441 Jy
! Component: 100  -  total flux cleaned = 1.89539 Jy
! Total flux subtracted in 100 components = 1.89539 Jy
! Clean residual min=-0.076920 max=0.187188 Jy/beam
! Clean residual mean=0.000050 rms=0.022817 Jy/beam
! Combined flux in latest and established models = 1.89539 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 1.89539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.583382Jy  sigma=6.270761
! Fit after  self-cal, rms=0.579929Jy  sigma=6.217175
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.22581 Jy
! Component: 100  -  total flux cleaned = 0.362815 Jy
! Total flux subtracted in 100 components = 0.362815 Jy
! Clean residual min=-0.057760 max=0.135918 Jy/beam
! Clean residual mean=0.000030 rms=0.014438 Jy/beam
! Combined flux in latest and established models = 2.2582 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 12 components and 2.2582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.377185Jy  sigma=4.026064
! Fit after  self-cal, rms=0.371374Jy  sigma=3.915453
! Inverting map 
! Added new window around map position (-0.8, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12988 Jy
! Component: 100  -  total flux cleaned = 0.210933 Jy
! Total flux subtracted in 100 components = 0.210933 Jy
! Clean residual min=-0.038509 max=0.045778 Jy/beam
! Clean residual mean=0.000025 rms=0.009315 Jy/beam
! Combined flux in latest and established models = 2.46913 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 2.46913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.264251Jy  sigma=2.814879
! Fit after  self-cal, rms=0.258569Jy  sigma=2.732469
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0661603 Jy
! Component: 100  -  total flux cleaned = 0.116281 Jy
! Total flux subtracted in 100 components = 0.116281 Jy
! Clean residual min=-0.032080 max=0.033963 Jy/beam
! Clean residual mean=0.000018 rms=0.007236 Jy/beam
! Combined flux in latest and established models = 2.58541 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 40 components and 2.58541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.206529Jy  sigma=2.216602
! Fit after  self-cal, rms=0.205434Jy  sigma=2.199345
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.987 mas, bmaj=2.067 mas, bpa=28.65 degrees
! Estimated noise=0.443783 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10061 Jy
! Component: 100  -  total flux cleaned = 0.161919 Jy
! Component: 150  -  total flux cleaned = 0.207635 Jy
! Component: 200  -  total flux cleaned = 0.242484 Jy
! Total flux subtracted in 200 components = 0.242484 Jy
! Clean residual min=-0.024769 max=0.029155 Jy/beam
! Clean residual mean=-0.000008 rms=0.006396 Jy/beam
! Combined flux in latest and established models = 2.8279 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 82 components and 2.8279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114351Jy  sigma=1.288243
! Fit after  self-cal, rms=0.112623Jy  sigma=1.265834
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.987 x 2.067 at 28.65 degrees (North through East)
! Clean map  min=-0.021565  max=1.9965 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.98     NL        1.01     OV        0.99     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.02     KP        0.98     
!   LA        0.96     NL        1.00     OV        0.99     PT        0.96     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.01     OV        0.99     PT        0.96     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.96     NL        1.01     OV        1.00     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.96     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.97     NL        1.01     OV        0.99     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.97     NL        1.02     OV        0.99     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.96     NL        1.01     OV        0.99     PT        0.96     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.97     NL        1.00     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.97     NL        1.00     OV        0.99     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.98     NL        1.02     OV        0.99     PT        0.97     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.112623Jy  sigma=1.265834
! Fit after  self-cal, rms=0.090865Jy  sigma=1.047734
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9912 mas, bmaj=2.076 mas, bpa=28.55 degrees
! Estimated noise=0.441163 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013308 Jy
! Component: 100  -  total flux cleaned = 0.0177597 Jy
! Component: 150  -  total flux cleaned = 0.0219284 Jy
! Component: 200  -  total flux cleaned = 0.0254128 Jy
! Total flux subtracted in 200 components = 0.0254128 Jy
! Clean residual min=-0.013301 max=0.012562 Jy/beam
! Clean residual mean=-0.000009 rms=0.002704 Jy/beam
! Combined flux in latest and established models = 2.85331 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 97 components and 2.85331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086464Jy  sigma=1.007360
! Fit after  self-cal, rms=0.086002Jy  sigma=1.000286
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086002Jy  sigma=1.000286
! Fit after  self-cal, rms=0.073905Jy  sigma=0.853400
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9905 mas, bmaj=2.077 mas, bpa=28.64 degrees
! Estimated noise=0.440734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320419 Jy
! Component: 100  -  total flux cleaned = 0.00492231 Jy
! Component: 150  -  total flux cleaned = 0.00601067 Jy
! Component: 200  -  total flux cleaned = 0.00660857 Jy
! Total flux subtracted in 200 components = 0.00660857 Jy
! Clean residual min=-0.008985 max=0.010269 Jy/beam
! Clean residual mean=-0.000022 rms=0.001980 Jy/beam
! Combined flux in latest and established models = 2.85992 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 106 components and 2.85992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072608Jy  sigma=0.842306
! Fit after  self-cal, rms=0.072476Jy  sigma=0.839675
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00954202 Jy
! Component: 100  -  total flux cleaned = 0.015711 Jy
! Component: 150  -  total flux cleaned = 0.0204599 Jy
! Component: 200  -  total flux cleaned = 0.0232013 Jy
! Total flux subtracted in 200 components = 0.0232013 Jy
! Clean residual min=-0.006851 max=0.006404 Jy/beam
! Clean residual mean=-0.000009 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 2.88312 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 134 components and 2.88312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070304Jy  sigma=0.823279
! Fit after  self-cal, rms=0.070063Jy  sigma=0.822033
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070063Jy  sigma=0.822033
! Fit after  self-cal, rms=0.069797Jy  sigma=0.819516
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9908 mas, bmaj=2.078 mas, bpa=28.65 degrees
! Estimated noise=0.440501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155844 Jy
! Component: 100  -  total flux cleaned = 0.00382133 Jy
! Component: 150  -  total flux cleaned = 0.0058463 Jy
! Component: 200  -  total flux cleaned = 0.00758162 Jy
! Total flux subtracted in 200 components = 0.00758162 Jy
! Clean residual min=-0.005891 max=0.005713 Jy/beam
! Clean residual mean=-0.000008 rms=0.001406 Jy/beam
! Combined flux in latest and established models = 2.8907 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 151 components and 2.8907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069150Jy  sigma=0.815129
! Fit after  self-cal, rms=0.069092Jy  sigma=0.814811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000541547 Jy
! Component: 100  -  total flux cleaned = 0.00160042 Jy
! Component: 150  -  total flux cleaned = 0.00263859 Jy
! Component: 200  -  total flux cleaned = 0.00351159 Jy
! Total flux subtracted in 200 components = 0.00351159 Jy
! Clean residual min=-0.005299 max=0.005410 Jy/beam
! Clean residual mean=-0.000006 rms=0.001357 Jy/beam
! Combined flux in latest and established models = 2.89421 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 161 components and 2.89421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068845Jy  sigma=0.813011
! Fit after  self-cal, rms=0.068818Jy  sigma=0.812837
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068818Jy  sigma=0.812837
! Fit after  self-cal, rms=0.068773Jy  sigma=0.812040
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.095 mas, bmaj=2.524 mas, bpa=18.81 degrees
! Estimated noise=0.594411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000440641 Jy
! Component: 100  -  total flux cleaned = 0.00114746 Jy
! Component: 150  -  total flux cleaned = 0.00208069 Jy
! Component: 200  -  total flux cleaned = 0.00270589 Jy
! Total flux subtracted in 200 components = 0.00270589 Jy
! Clean residual min=-0.006871 max=0.008421 Jy/beam
! Clean residual mean=-0.000010 rms=0.002235 Jy/beam
! Combined flux in latest and established models = 2.89692 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 168 components and 2.89692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068549Jy  sigma=0.812897
! Fit after  self-cal, rms=0.068502Jy  sigma=0.811862
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00125999 Jy
! Component: 100  -  total flux cleaned = -0.000585596 Jy
! Component: 150  -  total flux cleaned = -9.5316e-05 Jy
! Component: 200  -  total flux cleaned = 0.000277368 Jy
! Total flux subtracted in 200 components = 0.000277368 Jy
! Clean residual min=-0.006913 max=0.008336 Jy/beam
! Clean residual mean=-0.000008 rms=0.002208 Jy/beam
! Combined flux in latest and established models = 2.8972 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 177 components and 2.8972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068466Jy  sigma=0.812611
! Fit after  self-cal, rms=0.068444Jy  sigma=0.812245
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9911 mas, bmaj=2.078 mas, bpa=28.65 degrees
! Estimated noise=0.440419 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9911 x 2.078 at 28.65 degrees (North through East)
! Clean map  min=-0.0049907  max=1.9798 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068444Jy  sigma=0.812245
! Fit after  self-cal, rms=0.063942Jy  sigma=0.683075
! Inverting map and beam 
! Estimated beam: bmin=0.9908 mas, bmaj=2.079 mas, bpa=28.69 degrees
! Estimated noise=0.440047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00294479 Jy
! Component: 100  -  total flux cleaned = -0.00404363 Jy
! Component: 150  -  total flux cleaned = -0.00450922 Jy
! Component: 200  -  total flux cleaned = -0.0047859 Jy
! Total flux subtracted in 200 components = -0.0047859 Jy
! Clean residual min=-0.004768 max=0.004947 Jy/beam
! Clean residual mean=-0.000005 rms=0.001226 Jy/beam
! Combined flux in latest and established models = 2.89241 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 193 components and 2.89241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063680Jy  sigma=0.679979
! Fit after  self-cal, rms=0.063655Jy  sigma=0.679829
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000765967 Jy
! Component: 100  -  total flux cleaned = -0.000883884 Jy
! Component: 150  -  total flux cleaned = -0.00093497 Jy
! Component: 200  -  total flux cleaned = -0.00108539 Jy
! Total flux subtracted in 200 components = -0.00108539 Jy
! Clean residual min=-0.004680 max=0.004785 Jy/beam
! Clean residual mean=-0.000004 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 2.89133 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 198 components and 2.89133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063553Jy  sigma=0.678700
! Fit after  self-cal, rms=0.063539Jy  sigma=0.678623
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063539Jy  sigma=0.678623
! Fit after  self-cal, rms=0.063494Jy  sigma=0.678118
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.865 mas, bmaj=1.878 mas, bpa=27.09 degrees
! Estimated noise=1.1571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.50973 Jy
! Component: 100  -  total flux cleaned = 1.96434 Jy
! Component: 150  -  total flux cleaned = 2.20716 Jy
! Component: 200  -  total flux cleaned = 2.35253 Jy
! Total flux subtracted in 200 components = 2.35253 Jy
! Clean residual min=-0.038299 max=0.077452 Jy/beam
! Clean residual mean=-0.000007 rms=0.010417 Jy/beam
! Combined flux in latest and established models = 2.35253 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 2.35253 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9909 mas, bmaj=2.079 mas, bpa=28.7 degrees
! Estimated noise=0.439898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.144266 Jy
! Component: 100  -  total flux cleaned = 0.236919 Jy
! Component: 150  -  total flux cleaned = 0.302049 Jy
! Component: 200  -  total flux cleaned = 0.349013 Jy
! Total flux subtracted in 200 components = 0.349013 Jy
! Clean residual min=-0.016816 max=0.028483 Jy/beam
! Clean residual mean=-0.000014 rms=0.005454 Jy/beam
! Combined flux in latest and established models = 2.70154 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 49 components and 2.70154 Jy
! Inverting map 
! Added new window around map position (-11.8, 25.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0343032 Jy
! Component: 100  -  total flux cleaned = 0.059349 Jy
! Component: 150  -  total flux cleaned = 0.078072 Jy
! Component: 200  -  total flux cleaned = 0.0926678 Jy
! Total flux subtracted in 200 components = 0.0926678 Jy
! Clean residual min=-0.009915 max=0.009309 Jy/beam
! Clean residual mean=-0.000018 rms=0.002498 Jy/beam
! Combined flux in latest and established models = 2.79421 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 70 components and 2.79421 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=2.524 mas, bpa=18.87 degrees
! Estimated noise=0.59342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0190381 Jy
! Component: 100  -  total flux cleaned = 0.0321985 Jy
! Component: 150  -  total flux cleaned = 0.0425754 Jy
! Component: 200  -  total flux cleaned = 0.0509934 Jy
! Total flux subtracted in 200 components = 0.0509934 Jy
! Clean residual min=-0.008955 max=0.008837 Jy/beam
! Clean residual mean=-0.000028 rms=0.002909 Jy/beam
! Combined flux in latest and established models = 2.8452 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0069586 Jy
! Component: 100  -  total flux cleaned = 0.012767 Jy
! Component: 150  -  total flux cleaned = 0.0176366 Jy
! Component: 200  -  total flux cleaned = 0.0217497 Jy
! Total flux subtracted in 200 components = 0.0217497 Jy
! Clean residual min=-0.007573 max=0.007524 Jy/beam
! Clean residual mean=-0.000017 rms=0.002403 Jy/beam
! Combined flux in latest and established models = 2.86695 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 142 components and 2.86695 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9909 mas, bmaj=2.079 mas, bpa=28.7 degrees
! Estimated noise=0.439898 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272407 Jy
! Component: 100  -  total flux cleaned = 0.00479955 Jy
! Component: 150  -  total flux cleaned = 0.00641597 Jy
! Component: 200  -  total flux cleaned = 0.00760987 Jy
! Total flux subtracted in 200 components = 0.00760987 Jy
! Clean residual min=-0.005704 max=0.006481 Jy/beam
! Clean residual mean=-0.000005 rms=0.001347 Jy/beam
! Combined flux in latest and established models = 2.87456 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 165 components and 2.87456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064093Jy  sigma=0.687948
! Fit after  self-cal, rms=0.063911Jy  sigma=0.684253
wmodel /J0237+2848_X_map.mod
! wmodel: Unable to open new model file: /J0237+2848_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0237+2848_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9909 x 2.079 at 28.7 degrees (North through East)
! Clean map  min=-0.0048108  max=1.9769 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0237+2848_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.97689 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00131491 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.199542 0.199542 0.399084 0.798167 1.59633 3.19267 6.38534 12.7707 25.5414 51.0827
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0039 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.976 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1503.44 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0237+2848_X_dfm.log closed on Thu May 19 18:20:44 2016