! Started logfile: /scr/pima/bg219e_uvs/J0231+1322_X_dfm.log on Thu May 19 18:20:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0231+1322_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0231+1322_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.863095 visibilities/baseline/integration-bin.
! Found source: J0231+1322
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5220 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0231+1322_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.831674Jy  sigma=31.097822
! Fit after  self-cal, rms=0.637283Jy  sigma=10.328868
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8192 mas, bmaj=2.129 mas, bpa=18.08 degrees
! Estimated noise=1.034 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.958381 Jy
! Component: 100  -  total flux cleaned = 1.30441 Jy
! Total flux subtracted in 100 components = 1.30441 Jy
! Clean residual min=-0.062938 max=0.170075 Jy/beam
! Clean residual mean=-0.000042 rms=0.018033 Jy/beam
! Combined flux in latest and established models = 1.30441 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 1.30441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.418102Jy  sigma=6.716346
! Fit after  self-cal, rms=0.417799Jy  sigma=6.712122
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.200229 Jy
! Component: 100  -  total flux cleaned = 0.3205 Jy
! Total flux subtracted in 100 components = 0.3205 Jy
! Clean residual min=-0.027431 max=0.061488 Jy/beam
! Clean residual mean=-0.000020 rms=0.007416 Jy/beam
! Combined flux in latest and established models = 1.62491 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 14 components and 1.62491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.200153Jy  sigma=3.191773
! Fit after  self-cal, rms=0.200002Jy  sigma=3.190639
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0738517 Jy
! Component: 100  -  total flux cleaned = 0.121971 Jy
! Total flux subtracted in 100 components = 0.121971 Jy
! Clean residual min=-0.017511 max=0.026724 Jy/beam
! Clean residual mean=-0.000012 rms=0.004437 Jy/beam
! Combined flux in latest and established models = 1.74688 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 1.74688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.133782Jy  sigma=2.113355
! Fit after  self-cal, rms=0.133630Jy  sigma=2.112675
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0340751 Jy
! Component: 100  -  total flux cleaned = 0.0584966 Jy
! Total flux subtracted in 100 components = 0.0584966 Jy
! Clean residual min=-0.013677 max=0.018238 Jy/beam
! Clean residual mean=-0.000008 rms=0.003532 Jy/beam
! Combined flux in latest and established models = 1.80538 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 1.80538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110699Jy  sigma=1.745227
! Fit after  self-cal, rms=0.110509Jy  sigma=1.743651
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.305 mas, bpa=14.52 degrees
! Estimated noise=0.705086 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0394556 Jy
! Component: 100  -  total flux cleaned = 0.063461 Jy
! Component: 150  -  total flux cleaned = 0.0798927 Jy
! Component: 200  -  total flux cleaned = 0.0913406 Jy
! Total flux subtracted in 200 components = 0.0913406 Jy
! Clean residual min=-0.011608 max=0.021898 Jy/beam
! Clean residual mean=-0.000015 rms=0.003279 Jy/beam
! Combined flux in latest and established models = 1.89672 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 54 components and 1.89672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091120Jy  sigma=1.437555
! Fit after  self-cal, rms=0.091021Jy  sigma=1.436690
! Inverting map 
! Added new window around map position (2, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185817 Jy
! Component: 100  -  total flux cleaned = 0.0286027 Jy
! Component: 150  -  total flux cleaned = 0.0358731 Jy
! Component: 200  -  total flux cleaned = 0.0394058 Jy
! Total flux subtracted in 200 components = 0.0394058 Jy
! Clean residual min=-0.009423 max=0.012314 Jy/beam
! Clean residual mean=-0.000006 rms=0.002562 Jy/beam
! Combined flux in latest and established models = 1.93613 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 87 components and 1.93613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086437Jy  sigma=1.361884
! Fit after  self-cal, rms=0.085900Jy  sigma=1.351775
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.068 x 2.305 at 14.52 degrees (North through East)
! Clean map  min=-0.0090305  max=1.4241 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        1.00     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        0.99     
!   LA        0.98     NL        0.99     OV        0.99     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.02     OV        0.99     PT        1.03     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.02     KP        0.99     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        1.00     
!   LA        1.00     NL        1.02     OV        1.00     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        0.99     
!   LA        1.00     NL        1.01     OV        1.01     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.99     NL        1.01     OV        1.00     PT        1.00     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.085900Jy  sigma=1.351775
! Fit after  self-cal, rms=0.082158Jy  sigma=1.275048
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.312 mas, bpa=14.58 degrees
! Estimated noise=0.704471 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00355725 Jy
! Component: 100  -  total flux cleaned = -0.00476479 Jy
! Component: 150  -  total flux cleaned = -0.00592583 Jy
! Component: 200  -  total flux cleaned = -0.00681449 Jy
! Total flux subtracted in 200 components = -0.00681449 Jy
! Clean residual min=-0.006289 max=0.006958 Jy/beam
! Clean residual mean=0.000004 rms=0.001613 Jy/beam
! Combined flux in latest and established models = 1.92931 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 100 components and 1.92931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081569Jy  sigma=1.266640
! Fit after  self-cal, rms=0.081543Jy  sigma=1.266321
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081543Jy  sigma=1.266321
! Fit after  self-cal, rms=0.080104Jy  sigma=1.229510
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.315 mas, bpa=14.62 degrees
! Estimated noise=0.705012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00398027 Jy
! Component: 100  -  total flux cleaned = -0.00399751 Jy
! Component: 150  -  total flux cleaned = -0.00415819 Jy
! Component: 200  -  total flux cleaned = -0.0042281 Jy
! Total flux subtracted in 200 components = -0.0042281 Jy
! Clean residual min=-0.004618 max=0.005369 Jy/beam
! Clean residual mean=0.000006 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 1.92508 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 117 components and 1.92508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079803Jy  sigma=1.225763
! Fit after  self-cal, rms=0.079797Jy  sigma=1.225693
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00434067 Jy
! Component: 100  -  total flux cleaned = 0.00436046 Jy
! Component: 150  -  total flux cleaned = 0.00461657 Jy
! Component: 200  -  total flux cleaned = 0.00500271 Jy
! Total flux subtracted in 200 components = 0.00500271 Jy
! Clean residual min=-0.004333 max=0.004971 Jy/beam
! Clean residual mean=0.000007 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 1.93009 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 136 components and 1.93009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079467Jy  sigma=1.220452
! Fit after  self-cal, rms=0.079447Jy  sigma=1.220186
! Inverting map 
! Added new window around map position (-14.4, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00433014 Jy
! Component: 100  -  total flux cleaned = 0.00579856 Jy
! Component: 150  -  total flux cleaned = 0.00683969 Jy
! Component: 200  -  total flux cleaned = 0.00746166 Jy
! Total flux subtracted in 200 components = 0.00746166 Jy
! Clean residual min=-0.003886 max=0.004304 Jy/beam
! Clean residual mean=0.000004 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 1.93755 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 167 components and 1.93755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079079Jy  sigma=1.215275
! Fit after  self-cal, rms=0.079055Jy  sigma=1.214996
! Inverting map 
! Added new window around map position (-10.6, -18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389468 Jy
! Component: 100  -  total flux cleaned = 0.00597393 Jy
! Component: 150  -  total flux cleaned = 0.00685311 Jy
! Component: 200  -  total flux cleaned = 0.00764325 Jy
! Total flux subtracted in 200 components = 0.00764325 Jy
! Clean residual min=-0.003540 max=0.003402 Jy/beam
! Clean residual mean=0.000002 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 1.94519 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 192 components and 1.94519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078783Jy  sigma=1.210898
! Fit after  self-cal, rms=0.078775Jy  sigma=1.210714
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078775Jy  sigma=1.210714
! Fit after  self-cal, rms=0.078659Jy  sigma=1.208847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.315 mas, bpa=14.63 degrees
! Estimated noise=0.704709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000724218 Jy
! Component: 100  -  total flux cleaned = 0.00179862 Jy
! Component: 150  -  total flux cleaned = 0.0027546 Jy
! Component: 200  -  total flux cleaned = 0.00363667 Jy
! Total flux subtracted in 200 components = 0.00363667 Jy
! Clean residual min=-0.003083 max=0.003123 Jy/beam
! Clean residual mean=0.000003 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 1.94883 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 208 components and 1.94883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078506Jy  sigma=1.207102
! Fit after  self-cal, rms=0.078502Jy  sigma=1.207047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.2, 19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000809867 Jy
! Component: 100  -  total flux cleaned = 0.00147656 Jy
! Component: 150  -  total flux cleaned = 0.00206983 Jy
! Component: 200  -  total flux cleaned = 0.00239334 Jy
! Total flux subtracted in 200 components = 0.00239334 Jy
! Clean residual min=-0.002843 max=0.002880 Jy/beam
! Clean residual mean=0.000002 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 1.95122 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 232 components and 1.95122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078348Jy  sigma=1.205051
! Fit after  self-cal, rms=0.078341Jy  sigma=1.204941
! Inverting map 
! Added new window around map position (13, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127456 Jy
! Component: 100  -  total flux cleaned = 0.00190615 Jy
! Component: 150  -  total flux cleaned = 0.00224524 Jy
! Component: 200  -  total flux cleaned = 0.00250822 Jy
! Total flux subtracted in 200 components = 0.00250822 Jy
! Clean residual min=-0.002745 max=0.002268 Jy/beam
! Clean residual mean=0.000002 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 1.95373 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 251 components and 1.95373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078210Jy  sigma=1.203260
! Fit after  self-cal, rms=0.078205Jy  sigma=1.203155
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078205Jy  sigma=1.203155
! Fit after  self-cal, rms=0.078176Jy  sigma=1.202556
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.991 mas, bmaj=2.79 mas, bpa=-0.315 degrees
! Estimated noise=0.914694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111166 Jy
! Component: 100  -  total flux cleaned = 0.00164135 Jy
! Component: 150  -  total flux cleaned = 0.00217396 Jy
! Component: 200  -  total flux cleaned = 0.00254992 Jy
! Total flux subtracted in 200 components = 0.00254992 Jy
! Clean residual min=-0.002774 max=0.002504 Jy/beam
! Clean residual mean=0.000005 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 1.95628 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 279 components and 1.95628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078089Jy  sigma=1.202160
! Fit after  self-cal, rms=0.078089Jy  sigma=1.202127
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000570301 Jy
! Component: 100  -  total flux cleaned = 0.000848493 Jy
! Component: 150  -  total flux cleaned = 0.00110625 Jy
! Component: 200  -  total flux cleaned = 0.001263 Jy
! Total flux subtracted in 200 components = 0.001263 Jy
! Clean residual min=-0.002626 max=0.002294 Jy/beam
! Clean residual mean=0.000005 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 1.95754 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 297 components and 1.95754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078046Jy  sigma=1.201901
! Fit after  self-cal, rms=0.078046Jy  sigma=1.201888
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.316 mas, bpa=14.65 degrees
! Estimated noise=0.70438 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.068 x 2.316 at 14.65 degrees (North through East)
! Clean map  min=-0.0028608  max=1.4203 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078046Jy  sigma=1.201888
! Fit after  self-cal, rms=0.059673Jy  sigma=0.891683
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.317 mas, bpa=14.69 degrees
! Estimated noise=0.704269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194777 Jy
! Component: 100  -  total flux cleaned = -0.00011809 Jy
! Component: 150  -  total flux cleaned = -0.000190423 Jy
! Component: 200  -  total flux cleaned = -0.000523405 Jy
! Total flux subtracted in 200 components = -0.000523405 Jy
! Clean residual min=-0.002758 max=0.002557 Jy/beam
! Clean residual mean=0.000000 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 1.95702 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 318 components and 1.95702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059492Jy  sigma=0.888456
! Fit after  self-cal, rms=0.059489Jy  sigma=0.888357
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234351 Jy
! Component: 100  -  total flux cleaned = -0.000410491 Jy
! Component: 150  -  total flux cleaned = -0.000466236 Jy
! Component: 200  -  total flux cleaned = -0.000567418 Jy
! Total flux subtracted in 200 components = -0.000567418 Jy
! Clean residual min=-0.002589 max=0.002366 Jy/beam
! Clean residual mean=0.000000 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 1.95645 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 331 components and 1.95645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059387Jy  sigma=0.886713
! Fit after  self-cal, rms=0.059387Jy  sigma=0.886666
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059387Jy  sigma=0.886666
! Fit after  self-cal, rms=0.059359Jy  sigma=0.886399
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8175 mas, bmaj=2.142 mas, bpa=18.21 degrees
! Estimated noise=1.03973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.964394 Jy
! Component: 100  -  total flux cleaned = 1.31325 Jy
! Component: 150  -  total flux cleaned = 1.51302 Jy
! Component: 200  -  total flux cleaned = 1.63305 Jy
! Total flux subtracted in 200 components = 1.63305 Jy
! Clean residual min=-0.025695 max=0.060828 Jy/beam
! Clean residual mean=-0.000016 rms=0.007001 Jy/beam
! Combined flux in latest and established models = 1.63305 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 1.63305 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.317 mas, bpa=14.7 degrees
! Estimated noise=0.704187 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110196 Jy
! Component: 100  -  total flux cleaned = 0.165516 Jy
! Component: 150  -  total flux cleaned = 0.19954 Jy
! Component: 200  -  total flux cleaned = 0.222394 Jy
! Total flux subtracted in 200 components = 0.222394 Jy
! Clean residual min=-0.008088 max=0.012496 Jy/beam
! Clean residual mean=-0.000011 rms=0.002468 Jy/beam
! Combined flux in latest and established models = 1.85545 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 39 components and 1.85545 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157185 Jy
! Component: 100  -  total flux cleaned = 0.0273163 Jy
! Component: 150  -  total flux cleaned = 0.0363711 Jy
! Component: 200  -  total flux cleaned = 0.0437809 Jy
! Total flux subtracted in 200 components = 0.0437809 Jy
! Clean residual min=-0.005411 max=0.005761 Jy/beam
! Clean residual mean=-0.000003 rms=0.001416 Jy/beam
! Combined flux in latest and established models = 1.89923 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 70 components and 1.89923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.992 mas, bmaj=2.791 mas, bpa=-0.3002 degrees
! Estimated noise=0.914233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00962673 Jy
! Component: 100  -  total flux cleaned = 0.0167583 Jy
! Component: 150  -  total flux cleaned = 0.0212317 Jy
! Component: 200  -  total flux cleaned = 0.0248544 Jy
! Total flux subtracted in 200 components = 0.0248544 Jy
! Clean residual min=-0.004816 max=0.005348 Jy/beam
! Clean residual mean=-0.000002 rms=0.001342 Jy/beam
! Combined flux in latest and established models = 1.92408 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00335487 Jy
! Component: 100  -  total flux cleaned = 0.00617072 Jy
! Component: 150  -  total flux cleaned = 0.00881704 Jy
! Component: 200  -  total flux cleaned = 0.0111823 Jy
! Total flux subtracted in 200 components = 0.0111823 Jy
! Clean residual min=-0.003966 max=0.004026 Jy/beam
! Clean residual mean=-0.000001 rms=0.001012 Jy/beam
! Combined flux in latest and established models = 1.93526 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 162 components and 1.93526 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.317 mas, bpa=14.7 degrees
! Estimated noise=0.704187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312702 Jy
! Component: 100  -  total flux cleaned = 0.00568162 Jy
! Component: 150  -  total flux cleaned = 0.00781477 Jy
! Component: 200  -  total flux cleaned = 0.00945074 Jy
! Total flux subtracted in 200 components = 0.00945074 Jy
! Clean residual min=-0.003001 max=0.003236 Jy/beam
! Clean residual mean=-0.000001 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 1.94472 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 187 components and 1.94472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059847Jy  sigma=0.896467
! Fit after  self-cal, rms=0.059841Jy  sigma=0.895764
wmodel /J0231+1322_X_map.mod
! wmodel: Unable to open new model file: /J0231+1322_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0231+1322_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.068 x 2.317 at 14.7 degrees (North through East)
! Clean map  min=-0.0036896  max=1.4223 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0231+1322_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.42233 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000736444 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.155332 0.155332 0.310665 0.621329 1.24266 2.48532 4.97063 9.94127 19.8825 39.7651 79.5301
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.422 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1931.34 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0231+1322_X_dfm.log closed on Thu May 19 18:20:27 2016