! Started logfile: /scr/pima/bg219e_uvs/J0220+1652_X_dfm.log on Thu May 19 18:20:01 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0220+1652_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0220+1652_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.878968 visibilities/baseline/integration-bin.
! Found source: J0220+1652
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15948 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0220+1652_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007944Jy  sigma=24.940837
! Fit after  self-cal, rms=0.914382Jy  sigma=22.626480
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9109 mas, bmaj=2.157 mas, bpa=17.34 degrees
! Estimated noise=0.437689 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0612271 Jy
! Component: 100  -  total flux cleaned = 0.0778621 Jy
! Total flux subtracted in 100 components = 0.0778621 Jy
! Clean residual min=-0.011199 max=0.031898 Jy/beam
! Clean residual mean=-0.000043 rms=0.003487 Jy/beam
! Combined flux in latest and established models = 0.0778622 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0778622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095361Jy  sigma=2.343755
! Fit after  self-cal, rms=0.094174Jy  sigma=2.317267
! Inverting map 
! Added new window around map position (-2, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0307742 Jy
! Component: 100  -  total flux cleaned = 0.0456186 Jy
! Total flux subtracted in 100 components = 0.0456186 Jy
! Clean residual min=-0.007753 max=0.017091 Jy/beam
! Clean residual mean=-0.000028 rms=0.002460 Jy/beam
! Combined flux in latest and established models = 0.123481 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.123481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082470Jy  sigma=2.001237
! Fit after  self-cal, rms=0.075089Jy  sigma=1.814486
! Inverting map 
! Added new window around map position (-3, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0259798 Jy
! Component: 100  -  total flux cleaned = 0.0399898 Jy
! Total flux subtracted in 100 components = 0.0399898 Jy
! Clean residual min=-0.005743 max=0.008225 Jy/beam
! Clean residual mean=-0.000016 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 0.163471 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.163471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064196Jy  sigma=1.522446
! Fit after  self-cal, rms=0.062618Jy  sigma=1.481039
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133946 Jy
! Component: 100  -  total flux cleaned = 0.0214635 Jy
! Total flux subtracted in 100 components = 0.0214635 Jy
! Clean residual min=-0.003952 max=0.004453 Jy/beam
! Clean residual mean=-0.000009 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.184934 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 41 components and 0.184934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059183Jy  sigma=1.389093
! Fit after  self-cal, rms=0.058877Jy  sigma=1.380778
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00691803 Jy
! Component: 100  -  total flux cleaned = 0.0113545 Jy
! Total flux subtracted in 100 components = 0.0113545 Jy
! Clean residual min=-0.003218 max=0.002941 Jy/beam
! Clean residual mean=-0.000006 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.196289 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 51 components and 0.196289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057918Jy  sigma=1.355265
! Fit after  self-cal, rms=0.057846Jy  sigma=1.353280
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.143 mas, bmaj=2.376 mas, bpa=15.13 degrees
! Estimated noise=0.238867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479612 Jy
! Component: 100  -  total flux cleaned = 0.00780864 Jy
! Component: 150  -  total flux cleaned = 0.00985933 Jy
! Component: 200  -  total flux cleaned = 0.0107165 Jy
! Total flux subtracted in 200 components = 0.0107165 Jy
! Clean residual min=-0.001547 max=0.001644 Jy/beam
! Clean residual mean=-0.000004 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.207005 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 66 components and 0.207005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057392Jy  sigma=1.341253
! Fit after  self-cal, rms=0.057374Jy  sigma=1.340668
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.143 x 2.376 at 15.13 degrees (North through East)
! Clean map  min=-0.0015005  max=0.082005 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.06     KP        0.98     
!   LA        0.98     NL        1.02     OV        0.96     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.94     KP        1.00     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.01     KP        1.02     
!   LA        0.97     NL        0.99     OV        0.97     PT        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.96     KP        1.00     
!   LA        1.00     NL        0.99     OV        0.97     PT        0.97     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.94     KP        0.99     
!   LA        0.98     NL        1.00     OV        1.06     PT        0.97     
!   SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     HN        1.03     KP        0.98     
!   LA        0.98     NL        1.01     OV        0.97     PT        0.97     
!   SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.03     KP        1.01     
!   LA        0.98     NL        1.06     OV        0.99     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.02     KP        1.00     
!   LA        0.99     NL        1.05     OV        0.98     PT        0.99     
!   SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.99     HN        1.04     KP        1.00     
!   LA        1.00     NL        1.00     OV        0.97     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.98     NL        1.03     OV        0.97     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.96     KP        1.01     
!   LA        1.01     NL        1.01     OV        0.94     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.01     
!   LA        1.01     NL        1.02     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.057374Jy  sigma=1.340668
! Fit after  self-cal, rms=0.056954Jy  sigma=1.336287
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.145 mas, bmaj=2.382 mas, bpa=15.01 degrees
! Estimated noise=0.2366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000760046 Jy
! Component: 100  -  total flux cleaned = -0.000728327 Jy
! Component: 150  -  total flux cleaned = -0.000789052 Jy
! Component: 200  -  total flux cleaned = -0.000872918 Jy
! Total flux subtracted in 200 components = -0.000872918 Jy
! Clean residual min=-0.001466 max=0.001402 Jy/beam
! Clean residual mean=-0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.206132 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.206132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056899Jy  sigma=1.335219
! Fit after  self-cal, rms=0.056899Jy  sigma=1.335044
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056899Jy  sigma=1.335044
! Fit after  self-cal, rms=0.056913Jy  sigma=1.332037
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.386 mas, bpa=14.94 degrees
! Estimated noise=0.236343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000223291 Jy
! Component: 100  -  total flux cleaned = -0.000304732 Jy
! Component: 150  -  total flux cleaned = -0.000395167 Jy
! Component: 200  -  total flux cleaned = -0.000416243 Jy
! Total flux subtracted in 200 components = -0.000416243 Jy
! Clean residual min=-0.001188 max=0.001216 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.205716 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.205716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056888Jy  sigma=1.331599
! Fit after  self-cal, rms=0.056895Jy  sigma=1.331511
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.20373e-05 Jy
! Component: 100  -  total flux cleaned = 3.26771e-05 Jy
! Component: 150  -  total flux cleaned = 3.35321e-05 Jy
! Component: 200  -  total flux cleaned = 1.63417e-05 Jy
! Total flux subtracted in 200 components = 1.63417e-05 Jy
! Clean residual min=-0.001185 max=0.001217 Jy/beam
! Clean residual mean=-0.000001 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.205732 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 88 components and 0.205732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056881Jy  sigma=1.331255
! Fit after  self-cal, rms=0.056881Jy  sigma=1.331236
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056881Jy  sigma=1.331236
! Fit after  self-cal, rms=0.056953Jy  sigma=1.331212
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.386 mas, bpa=14.93 degrees
! Estimated noise=0.236461 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000284326 Jy
! Component: 100  -  total flux cleaned = -0.00035211 Jy
! Component: 150  -  total flux cleaned = -0.000400084 Jy
! Component: 200  -  total flux cleaned = -0.000461463 Jy
! Total flux subtracted in 200 components = -0.000461463 Jy
! Clean residual min=-0.001159 max=0.001204 Jy/beam
! Clean residual mean=-0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.205271 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 91 components and 0.205271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056942Jy  sigma=1.331015
! Fit after  self-cal, rms=0.056942Jy  sigma=1.331003
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.63272e-05 Jy
! Component: 100  -  total flux cleaned = -2.19555e-05 Jy
! Component: 150  -  total flux cleaned = -6.37804e-05 Jy
! Component: 200  -  total flux cleaned = -9.01444e-05 Jy
! Total flux subtracted in 200 components = -9.01444e-05 Jy
! Clean residual min=-0.001153 max=0.001211 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.205181 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 93 components and 0.205181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056935Jy  sigma=1.330862
! Fit after  self-cal, rms=0.056935Jy  sigma=1.330854
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056935Jy  sigma=1.330854
! Fit after  self-cal, rms=0.056949Jy  sigma=1.330845
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.218 mas, bmaj=2.923 mas, bpa=0.531 degrees
! Estimated noise=0.272795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000381101 Jy
! Component: 100  -  total flux cleaned = -0.000526952 Jy
! Component: 150  -  total flux cleaned = -0.000627348 Jy
! Component: 200  -  total flux cleaned = -0.000654368 Jy
! Total flux subtracted in 200 components = -0.000654368 Jy
! Clean residual min=-0.001178 max=0.001126 Jy/beam
! Clean residual mean=-0.000002 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.204526 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 99 components and 0.204526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056946Jy  sigma=1.330797
! Fit after  self-cal, rms=0.056946Jy  sigma=1.330782
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.96091e-05 Jy
! Component: 100  -  total flux cleaned = -2.99658e-05 Jy
! Component: 150  -  total flux cleaned = -2.94926e-05 Jy
! Component: 200  -  total flux cleaned = -3.34475e-05 Jy
! Total flux subtracted in 200 components = -3.34475e-05 Jy
! Clean residual min=-0.001178 max=0.001115 Jy/beam
! Clean residual mean=-0.000002 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.204493 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 101 components and 0.204493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056945Jy  sigma=1.330770
! Fit after  self-cal, rms=0.056945Jy  sigma=1.330765
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.387 mas, bpa=14.93 degrees
! Estimated noise=0.236444 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.149 x 2.387 at 14.93 degrees (North through East)
! Clean map  min=-0.0010677  max=0.08151 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9138 mas, bmaj=2.163 mas, bpa=17.16 degrees
! Estimated noise=0.435607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.070472 Jy
! Component: 100  -  total flux cleaned = 0.111345 Jy
! Component: 150  -  total flux cleaned = 0.137371 Jy
! Component: 200  -  total flux cleaned = 0.154787 Jy
! Total flux subtracted in 200 components = 0.154787 Jy
! Clean residual min=-0.004916 max=0.009452 Jy/beam
! Clean residual mean=-0.000014 rms=0.001392 Jy/beam
! Combined flux in latest and established models = 0.154787 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.154787 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.387 mas, bpa=14.93 degrees
! Estimated noise=0.236444 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165038 Jy
! Component: 100  -  total flux cleaned = 0.0267455 Jy
! Component: 150  -  total flux cleaned = 0.0334632 Jy
! Component: 200  -  total flux cleaned = 0.0380286 Jy
! Total flux subtracted in 200 components = 0.0380286 Jy
! Clean residual min=-0.001984 max=0.002510 Jy/beam
! Clean residual mean=-0.000007 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.192816 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 41 components and 0.192816 Jy
! Inverting map 
! Added new window around map position (-1, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319612 Jy
! Component: 100  -  total flux cleaned = 0.00549961 Jy
! Component: 150  -  total flux cleaned = 0.00713918 Jy
! Component: 200  -  total flux cleaned = 0.00788807 Jy
! Total flux subtracted in 200 components = 0.00788807 Jy
! Clean residual min=-0.001347 max=0.001315 Jy/beam
! Clean residual mean=-0.000003 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.200704 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 72 components and 0.200704 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.218 mas, bmaj=2.923 mas, bpa=0.531 degrees
! Estimated noise=0.272795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139898 Jy
! Component: 100  -  total flux cleaned = 0.00224835 Jy
! Component: 150  -  total flux cleaned = 0.0028274 Jy
! Component: 200  -  total flux cleaned = 0.00324007 Jy
! Total flux subtracted in 200 components = 0.00324007 Jy
! Clean residual min=-0.001236 max=0.001107 Jy/beam
! Clean residual mean=-0.000002 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.203944 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227695 Jy
! Component: 100  -  total flux cleaned = 0.000341288 Jy
! Component: 150  -  total flux cleaned = 0.000421895 Jy
! Component: 200  -  total flux cleaned = 0.000470129 Jy
! Total flux subtracted in 200 components = 0.000470129 Jy
! Clean residual min=-0.001224 max=0.001116 Jy/beam
! Clean residual mean=-0.000002 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.204414 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 106 components and 0.204414 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=2.387 mas, bpa=14.93 degrees
! Estimated noise=0.236444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157437 Jy
! Component: 100  -  total flux cleaned = -2.66073e-05 Jy
! Component: 150  -  total flux cleaned = 0.000135718 Jy
! Component: 200  -  total flux cleaned = 0.000239848 Jy
! Total flux subtracted in 200 components = 0.000239848 Jy
! Clean residual min=-0.001135 max=0.001238 Jy/beam
! Clean residual mean=-0.000001 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.204654 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 118 components and 0.204654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056944Jy  sigma=1.330700
! Fit after  self-cal, rms=0.056942Jy  sigma=1.330589
wmodel /J0220+1652_X_map.mod
! wmodel: Unable to open new model file: /J0220+1652_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0220+1652_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.149 x 2.387 at 14.93 degrees (North through East)
! Clean map  min=-0.0010668  max=0.081638 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0220+1652_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0816383 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000290033 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.0658 1.0658 2.13159 4.26319 8.52638 17.0528 34.1055 68.211
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.081 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  281.479 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0220+1652_X_dfm.log closed on Thu May 19 18:20:04 2016