! Started logfile: /scr/pima/bg219e_uvs/J0213+1820_X_dfm.log on Thu May 19 18:19:54 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0213+1820_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0213+1820_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.922068 visibilities/baseline/integration-bin.
! Found source: J0213+1820
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14340 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0213+1820_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036987Jy  sigma=24.539067
! Fit after  self-cal, rms=0.717964Jy  sigma=16.887491
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9205 mas, bmaj=2.103 mas, bpa=16.66 degrees
! Estimated noise=0.487055 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.214239 Jy
! Component: 100  -  total flux cleaned = 0.265385 Jy
! Total flux subtracted in 100 components = 0.265385 Jy
! Clean residual min=-0.007170 max=0.021121 Jy/beam
! Clean residual mean=-0.000025 rms=0.002214 Jy/beam
! Combined flux in latest and established models = 0.265385 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.265385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070114Jy  sigma=1.599798
! Fit after  self-cal, rms=0.070107Jy  sigma=1.599554
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232796 Jy
! Component: 100  -  total flux cleaned = 0.0356607 Jy
! Total flux subtracted in 100 components = 0.0356607 Jy
! Clean residual min=-0.003860 max=0.005993 Jy/beam
! Clean residual mean=-0.000009 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 0.301046 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.301046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060042Jy  sigma=1.346929
! Fit after  self-cal, rms=0.060018Jy  sigma=1.346280
! Inverting map 
! Added new window around map position (-1, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693968 Jy
! Component: 100  -  total flux cleaned = 0.0109514 Jy
! Total flux subtracted in 100 components = 0.0109514 Jy
! Clean residual min=-0.003438 max=0.003121 Jy/beam
! Clean residual mean=-0.000004 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.311997 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.311997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058863Jy  sigma=1.317773
! Fit after  self-cal, rms=0.058853Jy  sigma=1.317556
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.344 mas, bpa=15.76 degrees
! Estimated noise=0.274128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440598 Jy
! Component: 100  -  total flux cleaned = 0.00707837 Jy
! Component: 150  -  total flux cleaned = 0.00896006 Jy
! Component: 200  -  total flux cleaned = 0.0103159 Jy
! Total flux subtracted in 200 components = 0.0103159 Jy
! Clean residual min=-0.002026 max=0.003140 Jy/beam
! Clean residual mean=-0.000002 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.322313 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 56 components and 0.322313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058485Jy  sigma=1.308447
! Fit after  self-cal, rms=0.058470Jy  sigma=1.308122
! Inverting map 
! Added new window around map position (-2.8, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00278399 Jy
! Component: 100  -  total flux cleaned = 0.00376879 Jy
! Component: 150  -  total flux cleaned = 0.0041904 Jy
! Component: 200  -  total flux cleaned = 0.00450948 Jy
! Total flux subtracted in 200 components = 0.00450948 Jy
! Clean residual min=-0.001988 max=0.002481 Jy/beam
! Clean residual mean=0.000000 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.326823 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 82 components and 0.326823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058337Jy  sigma=1.304943
! Fit after  self-cal, rms=0.058316Jy  sigma=1.304492
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.113 x 2.344 at 15.76 degrees (North through East)
! Clean map  min=-0.0017774  max=0.28358 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        1.01     
!   LA        1.00     NL        1.00     OV        1.01     PT        1.02     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        1.02     
!   LA        1.00     NL        1.03     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.03     KP        0.99     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.01     KP        1.01     
!   LA        0.99     NL        1.02     OV        1.00     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        1.00     
!   LA        0.99     NL        1.01     OV        1.01     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.97     NL        1.01     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.99     NL        1.02     OV        0.99     PT        1.02     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        0.98     
!   LA        1.00     NL        1.02     OV        1.00     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.02     KP        1.00     
!   LA        1.01     NL        0.99     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.98     KP        1.00     
!   LA        1.00     NL        1.01     OV        1.00     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.97     NL        1.01     OV        1.02     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.98     KP        1.00     
!   LA        0.99     NL        1.02     OV        1.00     PT        1.00     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.058316Jy  sigma=1.304492
! Fit after  self-cal, rms=0.057861Jy  sigma=1.297432
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.112 mas, bmaj=2.348 mas, bpa=15.82 degrees
! Estimated noise=0.273841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00040046 Jy
! Component: 100  -  total flux cleaned = -0.000660458 Jy
! Component: 150  -  total flux cleaned = -0.000720055 Jy
! Component: 200  -  total flux cleaned = -0.000754115 Jy
! Total flux subtracted in 200 components = -0.000754115 Jy
! Clean residual min=-0.001617 max=0.001510 Jy/beam
! Clean residual mean=0.000002 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.326069 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 104 components and 0.326069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057840Jy  sigma=1.296915
! Fit after  self-cal, rms=0.057838Jy  sigma=1.296881
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057838Jy  sigma=1.296881
! Fit after  self-cal, rms=0.057655Jy  sigma=1.292186
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.349 mas, bpa=15.83 degrees
! Estimated noise=0.273811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137212 Jy
! Component: 100  -  total flux cleaned = -0.000103806 Jy
! Component: 150  -  total flux cleaned = -7.22117e-05 Jy
! Component: 200  -  total flux cleaned = -7.23844e-05 Jy
! Total flux subtracted in 200 components = -7.23844e-05 Jy
! Clean residual min=-0.001420 max=0.001466 Jy/beam
! Clean residual mean=0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.325996 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 125 components and 0.325996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057644Jy  sigma=1.291962
! Fit after  self-cal, rms=0.057645Jy  sigma=1.291944
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117784 Jy
! Component: 100  -  total flux cleaned = 0.00142824 Jy
! Component: 150  -  total flux cleaned = 0.00161704 Jy
! Component: 200  -  total flux cleaned = 0.0017608 Jy
! Total flux subtracted in 200 components = 0.0017608 Jy
! Clean residual min=-0.001325 max=0.001330 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.327757 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 143 components and 0.327757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057611Jy  sigma=1.291178
! Fit after  self-cal, rms=0.057611Jy  sigma=1.291148
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057611Jy  sigma=1.291148
! Fit after  self-cal, rms=0.057589Jy  sigma=1.291097
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.349 mas, bpa=15.83 degrees
! Estimated noise=0.273705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324462 Jy
! Component: 100  -  total flux cleaned = 0.000467077 Jy
! Component: 150  -  total flux cleaned = 0.000596374 Jy
! Component: 200  -  total flux cleaned = 0.000686732 Jy
! Total flux subtracted in 200 components = 0.000686732 Jy
! Clean residual min=-0.001316 max=0.001332 Jy/beam
! Clean residual mean=0.000002 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.328444 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 150 components and 0.328444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057578Jy  sigma=1.290888
! Fit after  self-cal, rms=0.057578Jy  sigma=1.290884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133198 Jy
! Component: 100  -  total flux cleaned = 0.000173857 Jy
! Component: 150  -  total flux cleaned = 0.000225938 Jy
! Component: 200  -  total flux cleaned = 0.000263137 Jy
! Total flux subtracted in 200 components = 0.000263137 Jy
! Clean residual min=-0.001306 max=0.001324 Jy/beam
! Clean residual mean=0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.328707 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 161 components and 0.328707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057572Jy  sigma=1.290772
! Fit after  self-cal, rms=0.057572Jy  sigma=1.290769
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057572Jy  sigma=1.290769
! Fit after  self-cal, rms=0.057566Jy  sigma=1.290760
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.19 mas, bmaj=2.892 mas, bpa=5.043 degrees
! Estimated noise=0.323149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120985 Jy
! Component: 100  -  total flux cleaned = 0.000151597 Jy
! Component: 150  -  total flux cleaned = 0.000190652 Jy
! Component: 200  -  total flux cleaned = 0.000180559 Jy
! Total flux subtracted in 200 components = 0.000180559 Jy
! Clean residual min=-0.001449 max=0.001287 Jy/beam
! Clean residual mean=0.000004 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.328888 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 171 components and 0.328888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057563Jy  sigma=1.290699
! Fit after  self-cal, rms=0.057563Jy  sigma=1.290693
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.37655e-05 Jy
! Component: 100  -  total flux cleaned = 3.33959e-05 Jy
! Component: 150  -  total flux cleaned = 3.33674e-05 Jy
! Component: 200  -  total flux cleaned = 3.37878e-05 Jy
! Total flux subtracted in 200 components = 3.37878e-05 Jy
! Clean residual min=-0.001461 max=0.001252 Jy/beam
! Clean residual mean=0.000004 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.328921 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 176 components and 0.328921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057562Jy  sigma=1.290673
! Fit after  self-cal, rms=0.057562Jy  sigma=1.290669
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.35 mas, bpa=15.82 degrees
! Estimated noise=0.273674 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.113 x 2.35 at 15.82 degrees (North through East)
! Clean map  min=-0.0012145  max=0.28323 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.92 mas, bmaj=2.105 mas, bpa=16.68 degrees
! Estimated noise=0.486557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.213963 Jy
! Component: 100  -  total flux cleaned = 0.265267 Jy
! Component: 150  -  total flux cleaned = 0.288637 Jy
! Component: 200  -  total flux cleaned = 0.301035 Jy
! Total flux subtracted in 200 components = 0.301035 Jy
! Clean residual min=-0.003091 max=0.005989 Jy/beam
! Clean residual mean=-0.000009 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.301035 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.301035 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.35 mas, bpa=15.82 degrees
! Estimated noise=0.273674 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00906888 Jy
! Component: 100  -  total flux cleaned = 0.0138862 Jy
! Component: 150  -  total flux cleaned = 0.0169032 Jy
! Component: 200  -  total flux cleaned = 0.0190434 Jy
! Total flux subtracted in 200 components = 0.0190434 Jy
! Clean residual min=-0.001516 max=0.001540 Jy/beam
! Clean residual mean=-0.000002 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.320078 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 49 components and 0.320078 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.19 mas, bmaj=2.892 mas, bpa=5.043 degrees
! Estimated noise=0.323149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238494 Jy
! Component: 100  -  total flux cleaned = 0.00386867 Jy
! Component: 150  -  total flux cleaned = 0.00498098 Jy
! Component: 200  -  total flux cleaned = 0.00586195 Jy
! Total flux subtracted in 200 components = 0.00586195 Jy
! Clean residual min=-0.001446 max=0.001369 Jy/beam
! Clean residual mean=0.000002 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.32594 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000689166 Jy
! Component: 100  -  total flux cleaned = 0.0010793 Jy
! Component: 150  -  total flux cleaned = 0.00133926 Jy
! Component: 200  -  total flux cleaned = 0.00157349 Jy
! Total flux subtracted in 200 components = 0.00157349 Jy
! Clean residual min=-0.001431 max=0.001292 Jy/beam
! Clean residual mean=0.000003 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.327514 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 104 components and 0.327514 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.113 mas, bmaj=2.35 mas, bpa=15.82 degrees
! Estimated noise=0.273674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.43453e-05 Jy
! Component: 100  -  total flux cleaned = 9.83847e-05 Jy
! Component: 150  -  total flux cleaned = 0.000202861 Jy
! Component: 200  -  total flux cleaned = 0.000349965 Jy
! Total flux subtracted in 200 components = 0.000349965 Jy
! Clean residual min=-0.001278 max=0.001357 Jy/beam
! Clean residual mean=0.000001 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.327864 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 117 components and 0.327864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057575Jy  sigma=1.290949
! Fit after  self-cal, rms=0.057572Jy  sigma=1.290905
wmodel /J0213+1820_X_map.mod
! wmodel: Unable to open new model file: /J0213+1820_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0213+1820_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.113 x 2.35 at 15.82 degrees (North through East)
! Clean map  min=-0.0012019  max=0.28349 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0213+1820_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.283493 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000316502 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.334931 0.334931 0.669862 1.33972 2.67945 5.3589 10.7178 21.4356 42.8712 85.7424
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.283 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  895.706 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0213+1820_X_dfm.log closed on Thu May 19 18:19:57 2016