! Started logfile: /scr/pima/bg219e_uvs/J0209+2932_S_uvs.log on Thu Apr 7 06:33:50 2016 obs /scr/pima/bg219e_uvs/J0209+2932_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J0209+2932_S_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.858238 visibilities/baseline/integration-bin. ! Found source: J0209+2932 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7168 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0209+2932_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.031674Jy sigma=24.058994 ! Fit after self-cal, rms=0.775347Jy sigma=17.932503 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=7.099 mas, bpa=18.98 degrees ! Estimated noise=0.559248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170189 Jy ! Component: 100 - total flux cleaned = 0.233694 Jy ! Total flux subtracted in 100 components = 0.233694 Jy ! Clean residual min=-0.016224 max=0.054339 Jy/beam ! Clean residual mean=0.000005 rms=0.005146 Jy/beam ! Combined flux in latest and established models = 0.233694 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.233694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105714Jy sigma=2.425794 ! Fit after self-cal, rms=0.104946Jy sigma=2.409953 ! Inverting map ! Added new window around map position (-6, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493944 Jy ! Component: 100 - total flux cleaned = 0.0771388 Jy ! Total flux subtracted in 100 components = 0.0771388 Jy ! Clean residual min=-0.008335 max=0.021796 Jy/beam ! Clean residual mean=0.000003 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 0.310833 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.310833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074517Jy sigma=1.664014 ! Fit after self-cal, rms=0.072669Jy sigma=1.623190 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207268 Jy ! Component: 100 - total flux cleaned = 0.0342837 Jy ! Total flux subtracted in 100 components = 0.0342837 Jy ! Clean residual min=-0.004354 max=0.010607 Jy/beam ! Clean residual mean=0.000001 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.345117 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.345117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064407Jy sigma=1.414089 ! Fit after self-cal, rms=0.064267Jy sigma=1.410978 ! Inverting map ! Added new window around map position (6, 5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103989 Jy ! Component: 100 - total flux cleaned = 0.0176138 Jy ! Total flux subtracted in 100 components = 0.0176138 Jy ! Clean residual min=-0.003441 max=0.004155 Jy/beam ! Clean residual mean=0.000000 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.362731 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 77 components and 0.362731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061761Jy sigma=1.347284 ! Fit after self-cal, rms=0.061731Jy sigma=1.346737 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.522 mas, bmaj=7.666 mas, bpa=16.04 degrees ! Estimated noise=0.375687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00895554 Jy ! Component: 100 - total flux cleaned = 0.0150602 Jy ! Component: 150 - total flux cleaned = 0.0195394 Jy ! Component: 200 - total flux cleaned = 0.022961 Jy ! Total flux subtracted in 200 components = 0.022961 Jy ! Clean residual min=-0.002719 max=0.002740 Jy/beam ! Clean residual mean=-0.000001 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.385692 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 151 components and 0.385692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060097Jy sigma=1.306001 ! Fit after self-cal, rms=0.060062Jy sigma=1.305268 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.522 x 7.666 at 16.04 degrees (North through East) ! Clean map min=-0.002733 max=0.23042 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 0.96 KP 0.99 ! LA 0.99 NL 0.98 OV 0.99 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.00 KP 0.98 ! LA 0.99 NL 1.02 OV 0.98 PT 0.99 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.01 KP 1.00 ! LA 0.99 NL 1.02 OV 0.99 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.04 KP 1.01 ! LA 1.03 NL 1.01 OV 1.02 PT 1.01 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.060062Jy sigma=1.305268 ! Fit after self-cal, rms=0.059139Jy sigma=1.291640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.54 mas, bmaj=7.683 mas, bpa=15.88 degrees ! Estimated noise=0.373775 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145077 Jy ! Component: 100 - total flux cleaned = 0.00199792 Jy ! Component: 150 - total flux cleaned = 0.00225023 Jy ! Component: 200 - total flux cleaned = 0.0023415 Jy ! Total flux subtracted in 200 components = 0.0023415 Jy ! Clean residual min=-0.002206 max=0.002476 Jy/beam ! Clean residual mean=0.000004 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.388033 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 164 components and 0.388033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059093Jy sigma=1.290648 ! Fit after self-cal, rms=0.059080Jy sigma=1.290431 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059080Jy sigma=1.290431 ! Fit after self-cal, rms=0.058702Jy sigma=1.283504 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.535 mas, bmaj=7.677 mas, bpa=16.03 degrees ! Estimated noise=0.373691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766699 Jy ! Component: 100 - total flux cleaned = 0.00107452 Jy ! Component: 150 - total flux cleaned = 0.00120986 Jy ! Component: 200 - total flux cleaned = 0.00134287 Jy ! Total flux subtracted in 200 components = 0.00134287 Jy ! Clean residual min=-0.001862 max=0.001996 Jy/beam ! Clean residual mean=0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.389376 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 181 components and 0.389376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058680Jy sigma=1.282908 ! Fit after self-cal, rms=0.058669Jy sigma=1.282796 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (53.5, -72.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173321 Jy ! Component: 100 - total flux cleaned = 0.0023953 Jy ! Component: 150 - total flux cleaned = 0.00275438 Jy ! Component: 200 - total flux cleaned = 0.00303853 Jy ! Total flux subtracted in 200 components = 0.00303853 Jy ! Clean residual min=-0.001769 max=0.001829 Jy/beam ! Clean residual mean=0.000000 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.392415 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 202 components and 0.392415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058612Jy sigma=1.281282 ! Fit after self-cal, rms=0.058609Jy sigma=1.281189 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058609Jy sigma=1.281189 ! Fit after self-cal, rms=0.058623Jy sigma=1.281086 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.54 mas, bmaj=7.677 mas, bpa=15.98 degrees ! Estimated noise=0.3738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785866 Jy ! Component: 100 - total flux cleaned = 0.00113892 Jy ! Component: 150 - total flux cleaned = 0.00135859 Jy ! Component: 200 - total flux cleaned = 0.00149714 Jy ! Total flux subtracted in 200 components = 0.00149714 Jy ! Clean residual min=-0.001731 max=0.001727 Jy/beam ! Clean residual mean=0.000000 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.393912 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 215 components and 0.393912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058605Jy sigma=1.280627 ! Fit after self-cal, rms=0.058603Jy sigma=1.280598 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217469 Jy ! Component: 100 - total flux cleaned = 0.000328631 Jy ! Component: 150 - total flux cleaned = 0.000397487 Jy ! Component: 200 - total flux cleaned = 0.000493128 Jy ! Total flux subtracted in 200 components = 0.000493128 Jy ! Clean residual min=-0.001736 max=0.001695 Jy/beam ! Clean residual mean=0.000000 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.394405 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 224 components and 0.394405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058593Jy sigma=1.280344 ! Fit after self-cal, rms=0.058592Jy sigma=1.280321 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058592Jy sigma=1.280321 ! Fit after self-cal, rms=0.058616Jy sigma=1.280269 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.913 mas, bmaj=9.596 mas, bpa=-5.05 degrees ! Estimated noise=0.42858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359927 Jy ! Component: 100 - total flux cleaned = 0.000647264 Jy ! Component: 150 - total flux cleaned = 0.000815602 Jy ! Component: 200 - total flux cleaned = 0.000978284 Jy ! Total flux subtracted in 200 components = 0.000978284 Jy ! Clean residual min=-0.001731 max=0.001781 Jy/beam ! Clean residual mean=-0.000000 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.395383 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 247 components and 0.395383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058610Jy sigma=1.280111 ! Fit after self-cal, rms=0.058608Jy sigma=1.280072 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209224 Jy ! Component: 100 - total flux cleaned = 0.000227598 Jy ! Component: 150 - total flux cleaned = 0.000242941 Jy ! Component: 200 - total flux cleaned = 0.000270114 Jy ! Total flux subtracted in 200 components = 0.000270114 Jy ! Clean residual min=-0.001751 max=0.001715 Jy/beam ! Clean residual mean=-0.000000 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.395654 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 265 components and 0.395654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058607Jy sigma=1.280018 ! Fit after self-cal, rms=0.058606Jy sigma=1.280002 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.543 mas, bmaj=7.677 mas, bpa=15.93 degrees ! Estimated noise=0.373981 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.543 x 7.677 at 15.93 degrees (North through East) ! Clean map min=-0.0016207 max=0.22849 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=7.094 mas, bpa=18.9 degrees ! Estimated noise=0.560377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172988 Jy ! Component: 100 - total flux cleaned = 0.243995 Jy ! Component: 150 - total flux cleaned = 0.284373 Jy ! Component: 200 - total flux cleaned = 0.311534 Jy ! Total flux subtracted in 200 components = 0.311534 Jy ! Clean residual min=-0.007483 max=0.015044 Jy/beam ! Clean residual mean=0.000003 rms=0.002202 Jy/beam ! Combined flux in latest and established models = 0.311534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.311534 Jy ! Inverting map and beam ! Estimated beam: bmin=4.543 mas, bmaj=7.677 mas, bpa=15.93 degrees ! Estimated noise=0.373981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244616 Jy ! Component: 100 - total flux cleaned = 0.040007 Jy ! Component: 150 - total flux cleaned = 0.0504643 Jy ! Component: 200 - total flux cleaned = 0.057851 Jy ! Total flux subtracted in 200 components = 0.057851 Jy ! Clean residual min=-0.002613 max=0.004113 Jy/beam ! Clean residual mean=0.000003 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.369385 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 89 components and 0.369385 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533792 Jy ! Component: 100 - total flux cleaned = 0.00926208 Jy ! Component: 150 - total flux cleaned = 0.0122772 Jy ! Component: 200 - total flux cleaned = 0.0146872 Jy ! Total flux subtracted in 200 components = 0.0146872 Jy ! Clean residual min=-0.001874 max=0.002260 Jy/beam ! Clean residual mean=0.000002 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.384072 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 130 components and 0.384072 Jy ! Inverting map ! Added new window around map position (6, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022369 Jy ! Component: 100 - total flux cleaned = 0.00394969 Jy ! Component: 150 - total flux cleaned = 0.00542253 Jy ! Component: 200 - total flux cleaned = 0.00671332 Jy ! Total flux subtracted in 200 components = 0.00671332 Jy ! Clean residual min=-0.001730 max=0.001681 Jy/beam ! Clean residual mean=0.000001 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.390786 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 171 components and 0.390785 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.913 mas, bmaj=9.596 mas, bpa=-5.05 degrees ! Estimated noise=0.42858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116673 Jy ! Component: 100 - total flux cleaned = 0.00205867 Jy ! Component: 150 - total flux cleaned = 0.00282265 Jy ! Component: 200 - total flux cleaned = 0.00348268 Jy ! Total flux subtracted in 200 components = 0.00348268 Jy ! Clean residual min=-0.001634 max=0.001670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.394268 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571383 Jy ! Component: 100 - total flux cleaned = 0.00106874 Jy ! Component: 150 - total flux cleaned = 0.00150254 Jy ! Component: 200 - total flux cleaned = 0.00188675 Jy ! Total flux subtracted in 200 components = 0.00188675 Jy ! Clean residual min=-0.001523 max=0.001597 Jy/beam ! Clean residual mean=-0.000001 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.396155 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 246 components and 0.396155 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.543 mas, bmaj=7.677 mas, bpa=15.93 degrees ! Estimated noise=0.373981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.52786e-06 Jy ! Component: 100 - total flux cleaned = 0.000245009 Jy ! Component: 150 - total flux cleaned = 0.00041026 Jy ! Component: 200 - total flux cleaned = 0.000583178 Jy ! Total flux subtracted in 200 components = 0.000583178 Jy ! Clean residual min=-0.001514 max=0.001668 Jy/beam ! Clean residual mean=-0.000000 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.396738 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 267 components and 0.396738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058577Jy sigma=1.279447 ! Fit after self-cal, rms=0.058571Jy sigma=1.279327 wmodel /scr/pima/bg219e_uvs/J0209+2932_S_map.mod ! Writing 267 model components to file: /scr/pima/bg219e_uvs/J0209+2932_S_map.mod wobs /scr/pima/bg219e_uvs/J0209+2932_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J0209+2932_S_uvs.fits wwins /scr/pima/bg219e_uvs/J0209+2932_S_map.win ! wwins: Wrote 5 windows to /scr/pima/bg219e_uvs/J0209+2932_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192114 Jy ! Component: 100 - total flux cleaned = 0.000110377 Jy ! Component: 150 - total flux cleaned = 5.91108e-05 Jy ! Component: 200 - total flux cleaned = 0.000106842 Jy ! Component: 250 - total flux cleaned = 0.00010676 Jy ! Component: 300 - total flux cleaned = 4.07389e-05 Jy ! Component: 350 - total flux cleaned = -2.44006e-06 Jy ! Component: 400 - total flux cleaned = -0.000149085 Jy ! Component: 450 - total flux cleaned = -0.000210399 Jy ! Component: 500 - total flux cleaned = -0.000289778 Jy ! Component: 550 - total flux cleaned = -0.00028973 Jy ! Component: 600 - total flux cleaned = -0.000327936 Jy ! Component: 650 - total flux cleaned = -0.000308879 Jy ! Component: 700 - total flux cleaned = -0.000253776 Jy ! Component: 750 - total flux cleaned = -0.000271746 Jy ! Component: 800 - total flux cleaned = -0.000236151 Jy ! Component: 850 - total flux cleaned = -0.00016638 Jy ! Component: 900 - total flux cleaned = -0.00011481 Jy ! Component: 950 - total flux cleaned = -3.03137e-05 Jy ! Component: 1000 - total flux cleaned = 5.2882e-05 Jy ! Component: 1050 - total flux cleaned = 0.000118395 Jy ! Component: 1100 - total flux cleaned = 0.000198776 Jy ! Component: 1150 - total flux cleaned = 0.000214697 Jy ! Component: 1200 - total flux cleaned = 0.000308876 Jy ! Component: 1250 - total flux cleaned = 0.000386534 Jy ! Component: 1300 - total flux cleaned = 0.000524126 Jy ! Component: 1350 - total flux cleaned = 0.000569323 Jy ! Component: 1400 - total flux cleaned = 0.000718373 Jy ! Component: 1450 - total flux cleaned = 0.000791828 Jy ! Component: 1500 - total flux cleaned = 0.000879343 Jy ! Component: 1550 - total flux cleaned = 0.000894012 Jy ! Component: 1600 - total flux cleaned = 0.00102263 Jy ! Component: 1650 - total flux cleaned = 0.00105092 Jy ! Component: 1700 - total flux cleaned = 0.00112101 Jy ! Component: 1750 - total flux cleaned = 0.00119 Jy ! Component: 1800 - total flux cleaned = 0.0012309 Jy ! Component: 1850 - total flux cleaned = 0.00127154 Jy ! Component: 1900 - total flux cleaned = 0.00127163 Jy ! Component: 1950 - total flux cleaned = 0.00128499 Jy ! Component: 2000 - total flux cleaned = 0.00127204 Jy ! Component: 2050 - total flux cleaned = 0.00131124 Jy ! Component: 2100 - total flux cleaned = 0.00129834 Jy ! Component: 2150 - total flux cleaned = 0.00129845 Jy ! Component: 2200 - total flux cleaned = 0.00129842 Jy ! Component: 2250 - total flux cleaned = 0.00126087 Jy ! Component: 2300 - total flux cleaned = 0.00129838 Jy ! Component: 2350 - total flux cleaned = 0.0013354 Jy ! Component: 2400 - total flux cleaned = 0.00129879 Jy ! Component: 2450 - total flux cleaned = 0.00134716 Jy ! Component: 2500 - total flux cleaned = 0.00128707 Jy ! Component: 2550 - total flux cleaned = 0.00127556 Jy ! Component: 2600 - total flux cleaned = 0.00131095 Jy ! Component: 2650 - total flux cleaned = 0.00129908 Jy ! Component: 2700 - total flux cleaned = 0.00128752 Jy ! Component: 2750 - total flux cleaned = 0.00125305 Jy ! Component: 2800 - total flux cleaned = 0.00124173 Jy ! Component: 2850 - total flux cleaned = 0.00127574 Jy ! Component: 2900 - total flux cleaned = 0.00127559 Jy ! Component: 2950 - total flux cleaned = 0.00126438 Jy ! Component: 3000 - total flux cleaned = 0.00122006 Jy ! Component: 3050 - total flux cleaned = 0.00123111 Jy ! Component: 3100 - total flux cleaned = 0.00127477 Jy ! Component: 3150 - total flux cleaned = 0.00126398 Jy ! Component: 3200 - total flux cleaned = 0.00127476 Jy ! Component: 3250 - total flux cleaned = 0.00129622 Jy ! Component: 3300 - total flux cleaned = 0.00133863 Jy ! Component: 3350 - total flux cleaned = 0.00135973 Jy ! Component: 3400 - total flux cleaned = 0.00140169 Jy ! Component: 3450 - total flux cleaned = 0.00140171 Jy ! Component: 3500 - total flux cleaned = 0.00143273 Jy ! Component: 3550 - total flux cleaned = 0.00147381 Jy ! Component: 3600 - total flux cleaned = 0.00144305 Jy ! Component: 3650 - total flux cleaned = 0.0014837 Jy ! Component: 3700 - total flux cleaned = 0.00149376 Jy ! Component: 3750 - total flux cleaned = 0.00148384 Jy ! Component: 3800 - total flux cleaned = 0.00151387 Jy ! Component: 3850 - total flux cleaned = 0.0015238 Jy ! Component: 3900 - total flux cleaned = 0.00152372 Jy ! Component: 3950 - total flux cleaned = 0.00150414 Jy ! Component: 4000 - total flux cleaned = 0.00151403 Jy ! Component: 4050 - total flux cleaned = 0.00149464 Jy ! Total flux subtracted in 4096 components = 0.00148508 Jy ! Clean residual min=-0.000551 max=0.000545 Jy/beam ! Clean residual mean=0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.398223 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 567 components and 0.398223 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J0209+2932_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.543 x 7.677 at 15.93 degrees (North through East) ! Clean map min=-0.0011911 max=0.23069 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0209+2932_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.230695 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183652 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.238826 0.238826 0.477651 0.955302 1.9106 3.82121 7.64242 15.2848 30.5697 61.1393 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.23 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1256.15 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J0209+2932_S_uvs.log closed on Thu Apr 7 06:33:54 2016