! Started logfile: /scr/pima/bg219e_uvs/J0205+2416_X_uvs.log on Thu Apr  7 08:56:53 2016
obs /scr/pima/bg219e_uvs/J0205+2416_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0205+2416_X_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.912616 visibilities/baseline/integration-bin.
! Found source: J0205+2416
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18924 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0205+2416_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.016131Jy  sigma=25.671887
! Fit after  self-cal, rms=0.867392Jy  sigma=21.775806
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9731 mas, bmaj=2.05 mas, bpa=22.44 degrees
! Estimated noise=0.477152 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102196 Jy
! Component: 100  -  total flux cleaned = 0.139996 Jy
! Total flux subtracted in 100 components = 0.139996 Jy
! Clean residual min=-0.009255 max=0.019949 Jy/beam
! Clean residual mean=0.000002 rms=0.002728 Jy/beam
! Combined flux in latest and established models = 0.139996 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.139996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069511Jy  sigma=1.696434
! Fit after  self-cal, rms=0.067858Jy  sigma=1.657506
! Inverting map 
! Added new window around map position (1.2, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242186 Jy
! Component: 100  -  total flux cleaned = 0.0356648 Jy
! Total flux subtracted in 100 components = 0.0356648 Jy
! Clean residual min=-0.005206 max=0.006374 Jy/beam
! Clean residual mean=0.000003 rms=0.001321 Jy/beam
! Combined flux in latest and established models = 0.175661 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.175661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058481Jy  sigma=1.407959
! Fit after  self-cal, rms=0.057670Jy  sigma=1.388249
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00869365 Jy
! Component: 100  -  total flux cleaned = 0.0127067 Jy
! Total flux subtracted in 100 components = 0.0127067 Jy
! Clean residual min=-0.004096 max=0.003748 Jy/beam
! Clean residual mean=0.000003 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.188368 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.188368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056371Jy  sigma=1.354599
! Fit after  self-cal, rms=0.056198Jy  sigma=1.350330
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.177 mas, bmaj=2.232 mas, bpa=18.34 degrees
! Estimated noise=0.276014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332923 Jy
! Component: 100  -  total flux cleaned = 0.00494748 Jy
! Component: 150  -  total flux cleaned = 0.00527341 Jy
! Component: 200  -  total flux cleaned = 0.00535098 Jy
! Total flux subtracted in 200 components = 0.00535098 Jy
! Clean residual min=-0.002694 max=0.003865 Jy/beam
! Clean residual mean=0.000002 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.193719 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 42 components and 0.193719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055991Jy  sigma=1.345069
! Fit after  self-cal, rms=0.055959Jy  sigma=1.344257
! Inverting map 
! Added new window around map position (10, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305018 Jy
! Component: 100  -  total flux cleaned = 0.00407455 Jy
! Component: 150  -  total flux cleaned = 0.00502518 Jy
! Component: 200  -  total flux cleaned = 0.00563836 Jy
! Total flux subtracted in 200 components = 0.00563836 Jy
! Clean residual min=-0.001870 max=0.001811 Jy/beam
! Clean residual mean=0.000001 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.199357 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 68 components and 0.199357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055672Jy  sigma=1.336954
! Fit after  self-cal, rms=0.055629Jy  sigma=1.336024
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.177 x 2.232 at 18.34 degrees (North through East)
! Clean map  min=-0.0022738  max=0.12491 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.98     KP        1.02     
!   LA        1.01     NL        1.00     OV        1.00     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        1.00     
!   LA        1.00     NL        0.99     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        1.01     
!   LA        0.96     NL        0.99     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.96     KP        0.99     
!   LA        0.99     NL        1.01     OV        0.99     PT        1.00     
!   SC        1.04     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.98     KP        1.02     
!   LA        0.98     NL        0.98     OV        1.01     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.96     NL        1.02     OV        1.01     PT        1.03     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.01     KP        1.02     
!   LA        0.99     NL        1.02     OV        0.99     PT        1.01     
!   SC        1.03     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055629Jy  sigma=1.336024
! Fit after  self-cal, rms=0.055431Jy  sigma=1.332793
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.177 mas, bmaj=2.229 mas, bpa=18.25 degrees
! Estimated noise=0.275702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167672 Jy
! Component: 100  -  total flux cleaned = 0.000683517 Jy
! Component: 150  -  total flux cleaned = 0.000975445 Jy
! Component: 200  -  total flux cleaned = 0.00104012 Jy
! Total flux subtracted in 200 components = 0.00104012 Jy
! Clean residual min=-0.001546 max=0.001531 Jy/beam
! Clean residual mean=0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.200397 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 84 components and 0.200397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055373Jy  sigma=1.331446
! Fit after  self-cal, rms=0.055369Jy  sigma=1.331292
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055369Jy  sigma=1.331292
! Fit after  self-cal, rms=0.055199Jy  sigma=1.328447
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.176 mas, bmaj=2.23 mas, bpa=18.08 degrees
! Estimated noise=0.275457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000280023 Jy
! Component: 100  -  total flux cleaned = 0.000415501 Jy
! Component: 150  -  total flux cleaned = 0.000440879 Jy
! Component: 200  -  total flux cleaned = 0.000484959 Jy
! Total flux subtracted in 200 components = 0.000484959 Jy
! Clean residual min=-0.001455 max=0.001264 Jy/beam
! Clean residual mean=0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.200882 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 97 components and 0.200882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055174Jy  sigma=1.327890
! Fit after  self-cal, rms=0.055174Jy  sigma=1.327822
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203552 Jy
! Component: 100  -  total flux cleaned = 0.000324192 Jy
! Component: 150  -  total flux cleaned = 0.000378915 Jy
! Component: 200  -  total flux cleaned = 0.000395779 Jy
! Total flux subtracted in 200 components = 0.000395779 Jy
! Clean residual min=-0.001401 max=0.001247 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.201278 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 106 components and 0.201278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055160Jy  sigma=1.327535
! Fit after  self-cal, rms=0.055159Jy  sigma=1.327507
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055159Jy  sigma=1.327507
! Fit after  self-cal, rms=0.055161Jy  sigma=1.327473
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.176 mas, bmaj=2.231 mas, bpa=18.08 degrees
! Estimated noise=0.275551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00010297 Jy
! Component: 100  -  total flux cleaned = 0.000156077 Jy
! Component: 150  -  total flux cleaned = 0.000187894 Jy
! Component: 200  -  total flux cleaned = 0.000188193 Jy
! Total flux subtracted in 200 components = 0.000188193 Jy
! Clean residual min=-0.001342 max=0.001200 Jy/beam
! Clean residual mean=0.000001 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.201466 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 109 components and 0.201466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055151Jy  sigma=1.327251
! Fit after  self-cal, rms=0.055151Jy  sigma=1.327236
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.01205e-05 Jy
! Component: 100  -  total flux cleaned = 0.000123551 Jy
! Component: 150  -  total flux cleaned = 0.000136858 Jy
! Component: 200  -  total flux cleaned = 0.000162704 Jy
! Total flux subtracted in 200 components = 0.000162704 Jy
! Clean residual min=-0.001333 max=0.001188 Jy/beam
! Clean residual mean=0.000001 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.201629 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 114 components and 0.201629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055143Jy  sigma=1.327090
! Fit after  self-cal, rms=0.055143Jy  sigma=1.327080
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055143Jy  sigma=1.327080
! Fit after  self-cal, rms=0.055157Jy  sigma=1.327069
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.249 mas, bmaj=2.744 mas, bpa=0.1116 degrees
! Estimated noise=0.320072 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.81775e-05 Jy
! Component: 100  -  total flux cleaned = -6.22513e-05 Jy
! Component: 150  -  total flux cleaned = -0.00010592 Jy
! Component: 200  -  total flux cleaned = -0.000126475 Jy
! Total flux subtracted in 200 components = -0.000126475 Jy
! Clean residual min=-0.001278 max=0.001238 Jy/beam
! Clean residual mean=0.000002 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.201503 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 129 components and 0.201503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055155Jy  sigma=1.327022
! Fit after  self-cal, rms=0.055155Jy  sigma=1.327017
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.40778e-05 Jy
! Component: 100  -  total flux cleaned = 2.79035e-05 Jy
! Component: 150  -  total flux cleaned = 1.5941e-05 Jy
! Component: 200  -  total flux cleaned = 1.585e-05 Jy
! Total flux subtracted in 200 components = 1.585e-05 Jy
! Clean residual min=-0.001273 max=0.001220 Jy/beam
! Clean residual mean=0.000002 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.201518 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 135 components and 0.201518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055154Jy  sigma=1.326986
! Fit after  self-cal, rms=0.055154Jy  sigma=1.326982
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.176 mas, bmaj=2.232 mas, bpa=18.09 degrees
! Estimated noise=0.275636 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.176 x 2.232 at 18.09 degrees (North through East)
! Clean map  min=-0.0020175  max=0.12459 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9736 mas, bmaj=2.05 mas, bpa=22.12 degrees
! Estimated noise=0.477711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105015 Jy
! Component: 100  -  total flux cleaned = 0.147783 Jy
! Component: 150  -  total flux cleaned = 0.167863 Jy
! Component: 200  -  total flux cleaned = 0.177977 Jy
! Total flux subtracted in 200 components = 0.177977 Jy
! Clean residual min=-0.003525 max=0.004887 Jy/beam
! Clean residual mean=0.000002 rms=0.000935 Jy/beam
! Combined flux in latest and established models = 0.177977 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.177977 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.176 mas, bmaj=2.232 mas, bpa=18.09 degrees
! Estimated noise=0.275636 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00696322 Jy
! Component: 100  -  total flux cleaned = 0.011367 Jy
! Component: 150  -  total flux cleaned = 0.0145115 Jy
! Component: 200  -  total flux cleaned = 0.0163254 Jy
! Total flux subtracted in 200 components = 0.0163254 Jy
! Clean residual min=-0.001832 max=0.001757 Jy/beam
! Clean residual mean=0.000002 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.194302 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 48 components and 0.194302 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.249 mas, bmaj=2.744 mas, bpa=0.1116 degrees
! Estimated noise=0.320072 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244402 Jy
! Component: 100  -  total flux cleaned = 0.00357844 Jy
! Component: 150  -  total flux cleaned = 0.00435323 Jy
! Component: 200  -  total flux cleaned = 0.00496836 Jy
! Total flux subtracted in 200 components = 0.00496836 Jy
! Clean residual min=-0.001532 max=0.001281 Jy/beam
! Clean residual mean=0.000002 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.199271 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000491877 Jy
! Component: 100  -  total flux cleaned = 0.000920036 Jy
! Component: 150  -  total flux cleaned = 0.00125241 Jy
! Component: 200  -  total flux cleaned = 0.00149666 Jy
! Total flux subtracted in 200 components = 0.00149666 Jy
! Clean residual min=-0.001369 max=0.001289 Jy/beam
! Clean residual mean=0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.200767 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 92 components and 0.200767 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.176 mas, bmaj=2.232 mas, bpa=18.09 degrees
! Estimated noise=0.275636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000873943 Jy
! Component: 100  -  total flux cleaned = 0.000964681 Jy
! Component: 150  -  total flux cleaned = 0.000937287 Jy
! Component: 200  -  total flux cleaned = 0.00091255 Jy
! Total flux subtracted in 200 components = 0.00091255 Jy
! Clean residual min=-0.001389 max=0.001179 Jy/beam
! Clean residual mean=0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.20168 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 107 components and 0.20168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055175Jy  sigma=1.327505
! Fit after  self-cal, rms=0.055165Jy  sigma=1.327223
wmodel /scr/pima/bg219e_uvs/J0205+2416_X_map.mod
! Writing 107 model components to file: /scr/pima/bg219e_uvs/J0205+2416_X_map.mod
wobs /scr/pima/bg219e_uvs/J0205+2416_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0205+2416_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0205+2416_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219e_uvs/J0205+2416_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000589564 Jy
! Component: 100  -  total flux cleaned = -0.000864064 Jy
! Component: 150  -  total flux cleaned = -0.00105949 Jy
! Component: 200  -  total flux cleaned = -0.00120585 Jy
! Component: 250  -  total flux cleaned = -0.00134684 Jy
! Component: 300  -  total flux cleaned = -0.00144381 Jy
! Component: 350  -  total flux cleaned = -0.00150055 Jy
! Component: 400  -  total flux cleaned = -0.00157414 Jy
! Component: 450  -  total flux cleaned = -0.00164529 Jy
! Component: 500  -  total flux cleaned = -0.00166227 Jy
! Component: 550  -  total flux cleaned = -0.00164507 Jy
! Component: 600  -  total flux cleaned = -0.00166153 Jy
! Component: 650  -  total flux cleaned = -0.00167777 Jy
! Component: 700  -  total flux cleaned = -0.0016938 Jy
! Component: 750  -  total flux cleaned = -0.00174103 Jy
! Component: 800  -  total flux cleaned = -0.00171061 Jy
! Component: 850  -  total flux cleaned = -0.00175605 Jy
! Component: 900  -  total flux cleaned = -0.00180025 Jy
! Component: 950  -  total flux cleaned = -0.00181501 Jy
! Component: 1000  -  total flux cleaned = -0.00190007 Jy
! Component: 1050  -  total flux cleaned = -0.00188607 Jy
! Component: 1100  -  total flux cleaned = -0.00194102 Jy
! Component: 1150  -  total flux cleaned = -0.00196795 Jy
! Component: 1200  -  total flux cleaned = -0.00199452 Jy
! Component: 1250  -  total flux cleaned = -0.00199465 Jy
! Component: 1300  -  total flux cleaned = -0.00203346 Jy
! Component: 1350  -  total flux cleaned = -0.0020587 Jy
! Component: 1400  -  total flux cleaned = -0.00208386 Jy
! Component: 1450  -  total flux cleaned = -0.002096 Jy
! Component: 1500  -  total flux cleaned = -0.00210794 Jy
! Component: 1550  -  total flux cleaned = -0.00210789 Jy
! Component: 1600  -  total flux cleaned = -0.00214351 Jy
! Component: 1650  -  total flux cleaned = -0.00219017 Jy
! Component: 1700  -  total flux cleaned = -0.00219018 Jy
! Component: 1750  -  total flux cleaned = -0.00225859 Jy
! Component: 1800  -  total flux cleaned = -0.00230375 Jy
! Component: 1850  -  total flux cleaned = -0.0023706 Jy
! Component: 1900  -  total flux cleaned = -0.00241459 Jy
! Component: 1950  -  total flux cleaned = -0.0024474 Jy
! Component: 2000  -  total flux cleaned = -0.00252288 Jy
! Component: 2050  -  total flux cleaned = -0.00254418 Jy
! Component: 2100  -  total flux cleaned = -0.00258646 Jy
! Component: 2150  -  total flux cleaned = -0.00262827 Jy
! Component: 2200  -  total flux cleaned = -0.00264902 Jy
! Component: 2250  -  total flux cleaned = -0.0026798 Jy
! Component: 2300  -  total flux cleaned = -0.00273046 Jy
! Component: 2350  -  total flux cleaned = -0.00276066 Jy
! Component: 2400  -  total flux cleaned = -0.00277058 Jy
! Component: 2450  -  total flux cleaned = -0.00281992 Jy
! Component: 2500  -  total flux cleaned = -0.00284915 Jy
! Component: 2550  -  total flux cleaned = -0.00286857 Jy
! Component: 2600  -  total flux cleaned = -0.00290696 Jy
! Component: 2650  -  total flux cleaned = -0.00290699 Jy
! Component: 2700  -  total flux cleaned = -0.00296351 Jy
! Component: 2750  -  total flux cleaned = -0.00296349 Jy
! Component: 2800  -  total flux cleaned = -0.00300969 Jy
! Component: 2850  -  total flux cleaned = -0.00300966 Jy
! Component: 2900  -  total flux cleaned = -0.0030551 Jy
! Component: 2950  -  total flux cleaned = -0.00307308 Jy
! Component: 3000  -  total flux cleaned = -0.00310892 Jy
! Component: 3050  -  total flux cleaned = -0.00310013 Jy
! Component: 3100  -  total flux cleaned = -0.00312656 Jy
! Component: 3150  -  total flux cleaned = -0.00314401 Jy
! Component: 3200  -  total flux cleaned = -0.00316997 Jy
! Component: 3250  -  total flux cleaned = -0.00316136 Jy
! Component: 3300  -  total flux cleaned = -0.00316148 Jy
! Component: 3350  -  total flux cleaned = -0.00317825 Jy
! Component: 3400  -  total flux cleaned = -0.0032034 Jy
! Component: 3450  -  total flux cleaned = -0.00322826 Jy
! Component: 3500  -  total flux cleaned = -0.00324477 Jy
! Component: 3550  -  total flux cleaned = -0.00325302 Jy
! Component: 3600  -  total flux cleaned = -0.00330167 Jy
! Component: 3650  -  total flux cleaned = -0.00330974 Jy
! Component: 3700  -  total flux cleaned = -0.00335767 Jy
! Component: 3750  -  total flux cleaned = -0.00338932 Jy
! Component: 3800  -  total flux cleaned = -0.00339712 Jy
! Component: 3850  -  total flux cleaned = -0.00341274 Jy
! Component: 3900  -  total flux cleaned = -0.00345151 Jy
! Component: 3950  -  total flux cleaned = -0.00345917 Jy
! Component: 4000  -  total flux cleaned = -0.00345147 Jy
! Component: 4050  -  total flux cleaned = -0.0034439 Jy
! Total flux subtracted in 4096 components = -0.0034968 Jy
! Clean residual min=-0.000506 max=0.000460 Jy/beam
! Clean residual mean=0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.198183 Jy
keep
! Adding 269 model components to the UV plane model.
! The established model now contains 376 components and 0.198183 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0205+2416_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.176 x 2.232 at 18.09 degrees (North through East)
! Clean map  min=-0.0016183  max=0.12437 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0205+2416_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.124372 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000128806 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.310697 0.310697 0.621393 1.24279 2.48557 4.97114 9.94229 19.8846 39.7692 79.5383
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.124 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  965.572 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0205+2416_X_uvs.log closed on Thu Apr  7 08:56:57 2016