! Started logfile: /scr/pima/bg219e_uvs/J0205+2416_X_dfm.log on Thu May 19 18:19:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0205+2416_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0205+2416_X_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.912616 visibilities/baseline/integration-bin.
! Found source: J0205+2416
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18924 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0205+2416_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015296Jy  sigma=24.642941
! Fit after  self-cal, rms=0.868357Jy  sigma=20.931248
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9508 mas, bmaj=2.028 mas, bpa=21.66 degrees
! Estimated noise=0.441312 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0987977 Jy
! Component: 100  -  total flux cleaned = 0.135414 Jy
! Total flux subtracted in 100 components = 0.135414 Jy
! Clean residual min=-0.008962 max=0.019474 Jy/beam
! Clean residual mean=0.000001 rms=0.002428 Jy/beam
! Combined flux in latest and established models = 0.135414 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.135414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072847Jy  sigma=1.698711
! Fit after  self-cal, rms=0.071057Jy  sigma=1.658673
! Inverting map 
! Added new window around map position (1.2, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242677 Jy
! Component: 100  -  total flux cleaned = 0.0359906 Jy
! Total flux subtracted in 100 components = 0.0359906 Jy
! Clean residual min=-0.005022 max=0.006272 Jy/beam
! Clean residual mean=0.000001 rms=0.001190 Jy/beam
! Combined flux in latest and established models = 0.171405 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.171405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061417Jy  sigma=1.408660
! Fit after  self-cal, rms=0.060640Jy  sigma=1.390110
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00899011 Jy
! Component: 100  -  total flux cleaned = 0.013386 Jy
! Total flux subtracted in 100 components = 0.013386 Jy
! Clean residual min=-0.003740 max=0.003661 Jy/beam
! Clean residual mean=0.000002 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.184791 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.184791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059173Jy  sigma=1.351999
! Fit after  self-cal, rms=0.059024Jy  sigma=1.348465
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.168 mas, bmaj=2.216 mas, bpa=18.3 degrees
! Estimated noise=0.220076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398792 Jy
! Component: 100  -  total flux cleaned = 0.00595103 Jy
! Component: 150  -  total flux cleaned = 0.00696728 Jy
! Component: 200  -  total flux cleaned = 0.0072165 Jy
! Total flux subtracted in 200 components = 0.0072165 Jy
! Clean residual min=-0.002228 max=0.004128 Jy/beam
! Clean residual mean=0.000001 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.192007 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 42 components and 0.192007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058769Jy  sigma=1.341611
! Fit after  self-cal, rms=0.058741Jy  sigma=1.340906
! Inverting map 
! Added new window around map position (10, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00344408 Jy
! Component: 100  -  total flux cleaned = 0.00429544 Jy
! Component: 150  -  total flux cleaned = 0.00521532 Jy
! Component: 200  -  total flux cleaned = 0.00558827 Jy
! Total flux subtracted in 200 components = 0.00558827 Jy
! Clean residual min=-0.001815 max=0.001741 Jy/beam
! Clean residual mean=0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.197596 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 74 components and 0.197596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058499Jy  sigma=1.334648
! Fit after  self-cal, rms=0.058451Jy  sigma=1.333452
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.168 x 2.216 at 18.3 degrees (North through East)
! Clean map  min=-0.0018523  max=0.12423 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.98     KP        1.02     
!   LA        1.00     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        0.99     
!   LA        1.00     NL        0.99     OV        1.01     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        1.01     
!   LA        0.96     NL        0.99     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.96     KP        0.99     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.95     KP        1.01     
!   LA        0.99     NL        0.99     OV        0.99     PT        1.00     
!   SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.97     KP        1.01     
!   LA        0.98     NL        0.99     OV        1.01     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.95     NL        1.02     OV        1.01     PT        1.03     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        1.01     
!   LA        0.98     NL        1.02     OV        0.99     PT        1.01     
!   SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.00     KP        1.05     
!   LA        0.98     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.99     KP        1.01     
!   LA        0.99     NL        1.04     OV        1.04     PT        1.02     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        1.01     
!   LA        1.00     NL        1.01     OV        1.01     PT        1.03     
!   SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        1.05     
!   LA        0.97     NL        1.05     OV        1.02     PT        0.98     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.058451Jy  sigma=1.333452
! Fit after  self-cal, rms=0.058296Jy  sigma=1.329610
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=2.214 mas, bpa=18.19 degrees
! Estimated noise=0.22009 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155482 Jy
! Component: 100  -  total flux cleaned = 0.000406826 Jy
! Component: 150  -  total flux cleaned = 0.000542207 Jy
! Component: 200  -  total flux cleaned = 0.000657462 Jy
! Total flux subtracted in 200 components = 0.000657462 Jy
! Clean residual min=-0.001421 max=0.001334 Jy/beam
! Clean residual mean=0.000001 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.198253 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 80 components and 0.198253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058247Jy  sigma=1.328422
! Fit after  self-cal, rms=0.058240Jy  sigma=1.328262
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058240Jy  sigma=1.328262
! Fit after  self-cal, rms=0.058023Jy  sigma=1.325352
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=2.215 mas, bpa=17.97 degrees
! Estimated noise=0.219849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265921 Jy
! Component: 100  -  total flux cleaned = 0.000391029 Jy
! Component: 150  -  total flux cleaned = 0.000476569 Jy
! Component: 200  -  total flux cleaned = 0.000495243 Jy
! Total flux subtracted in 200 components = 0.000495243 Jy
! Clean residual min=-0.001312 max=0.001205 Jy/beam
! Clean residual mean=0.000000 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.198748 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 96 components and 0.198748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058004Jy  sigma=1.324929
! Fit after  self-cal, rms=0.058004Jy  sigma=1.324858
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.54823e-05 Jy
! Component: 100  -  total flux cleaned = 0.000254923 Jy
! Component: 150  -  total flux cleaned = 0.000332007 Jy
! Component: 200  -  total flux cleaned = 0.000346418 Jy
! Total flux subtracted in 200 components = 0.000346418 Jy
! Clean residual min=-0.001257 max=0.001165 Jy/beam
! Clean residual mean=0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.199095 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 102 components and 0.199095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057994Jy  sigma=1.324644
! Fit after  self-cal, rms=0.057992Jy  sigma=1.324617
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057992Jy  sigma=1.324617
! Fit after  self-cal, rms=0.057996Jy  sigma=1.324596
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=2.216 mas, bpa=17.94 degrees
! Estimated noise=0.219879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.66487e-05 Jy
! Component: 100  -  total flux cleaned = 8.60124e-05 Jy
! Component: 150  -  total flux cleaned = 0.000140491 Jy
! Component: 200  -  total flux cleaned = 0.000165435 Jy
! Total flux subtracted in 200 components = 0.000165435 Jy
! Clean residual min=-0.001225 max=0.001140 Jy/beam
! Clean residual mean=0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.19926 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 116 components and 0.19926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057989Jy  sigma=1.324440
! Fit after  self-cal, rms=0.057988Jy  sigma=1.324422
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.16981e-05 Jy
! Component: 100  -  total flux cleaned = 8.32675e-05 Jy
! Component: 150  -  total flux cleaned = 0.000128985 Jy
! Component: 200  -  total flux cleaned = 0.000139746 Jy
! Total flux subtracted in 200 components = 0.000139746 Jy
! Clean residual min=-0.001209 max=0.001111 Jy/beam
! Clean residual mean=0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.1994 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 123 components and 0.1994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057983Jy  sigma=1.324317
! Fit after  self-cal, rms=0.057983Jy  sigma=1.324305
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057983Jy  sigma=1.324305
! Fit after  self-cal, rms=0.057999Jy  sigma=1.324301
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.247 mas, bmaj=2.739 mas, bpa=-0.7103 degrees
! Estimated noise=0.254775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162636 Jy
! Component: 100  -  total flux cleaned = -6.11768e-05 Jy
! Component: 150  -  total flux cleaned = -4.49865e-05 Jy
! Component: 200  -  total flux cleaned = -5.85657e-05 Jy
! Total flux subtracted in 200 components = -5.85657e-05 Jy
! Clean residual min=-0.001014 max=0.001070 Jy/beam
! Clean residual mean=0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.199341 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 137 components and 0.199341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057998Jy  sigma=1.324263
! Fit after  self-cal, rms=0.057997Jy  sigma=1.324251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.44658e-06 Jy
! Component: 100  -  total flux cleaned = 5.62531e-05 Jy
! Component: 150  -  total flux cleaned = 5.02407e-05 Jy
! Component: 200  -  total flux cleaned = 3.8754e-05 Jy
! Total flux subtracted in 200 components = 3.8754e-05 Jy
! Clean residual min=-0.001010 max=0.001041 Jy/beam
! Clean residual mean=0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.19938 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 143 components and 0.19938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057996Jy  sigma=1.324233
! Fit after  self-cal, rms=0.057996Jy  sigma=1.324226
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=2.216 mas, bpa=17.92 degrees
! Estimated noise=0.219918 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.17 x 2.216 at 17.92 degrees (North through East)
! Clean map  min=-0.0015567  max=0.12386 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9527 mas, bmaj=2.026 mas, bpa=21.32 degrees
! Estimated noise=0.441723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101611 Jy
! Component: 100  -  total flux cleaned = 0.143991 Jy
! Component: 150  -  total flux cleaned = 0.164457 Jy
! Component: 200  -  total flux cleaned = 0.175014 Jy
! Total flux subtracted in 200 components = 0.175014 Jy
! Clean residual min=-0.003242 max=0.005051 Jy/beam
! Clean residual mean=0.000001 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.175014 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.175014 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=2.216 mas, bpa=17.92 degrees
! Estimated noise=0.219918 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00766519 Jy
! Component: 100  -  total flux cleaned = 0.0122969 Jy
! Component: 150  -  total flux cleaned = 0.0154266 Jy
! Component: 200  -  total flux cleaned = 0.0176027 Jy
! Total flux subtracted in 200 components = 0.0176027 Jy
! Clean residual min=-0.001611 max=0.001692 Jy/beam
! Clean residual mean=0.000001 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.192617 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 38 components and 0.192617 Jy
! Inverting map 
! Added new window around map position (13.4, -44.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135212 Jy
! Component: 100  -  total flux cleaned = 0.00235272 Jy
! Component: 150  -  total flux cleaned = 0.00324434 Jy
! Component: 200  -  total flux cleaned = 0.00400222 Jy
! Total flux subtracted in 200 components = 0.00400222 Jy
! Clean residual min=-0.001308 max=0.001105 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.196619 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 65 components and 0.196619 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.247 mas, bmaj=2.739 mas, bpa=-0.7103 degrees
! Estimated noise=0.254775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000978451 Jy
! Component: 100  -  total flux cleaned = 0.00145674 Jy
! Component: 150  -  total flux cleaned = 0.00178838 Jy
! Component: 200  -  total flux cleaned = 0.00202094 Jy
! Total flux subtracted in 200 components = 0.00202094 Jy
! Clean residual min=-0.001108 max=0.001006 Jy/beam
! Clean residual mean=0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.19864 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161401 Jy
! Component: 100  -  total flux cleaned = 0.000283949 Jy
! Component: 150  -  total flux cleaned = 0.000376769 Jy
! Component: 200  -  total flux cleaned = 0.000473287 Jy
! Total flux subtracted in 200 components = 0.000473287 Jy
! Clean residual min=-0.001086 max=0.001056 Jy/beam
! Clean residual mean=0.000000 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.199113 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 127 components and 0.199113 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.17 mas, bmaj=2.216 mas, bpa=17.92 degrees
! Estimated noise=0.219918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.89597e-05 Jy
! Component: 100  -  total flux cleaned = 4.0373e-05 Jy
! Component: 150  -  total flux cleaned = 0.000163041 Jy
! Component: 200  -  total flux cleaned = 0.000273757 Jy
! Total flux subtracted in 200 components = 0.000273757 Jy
! Clean residual min=-0.001129 max=0.001014 Jy/beam
! Clean residual mean=0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.199387 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 150 components and 0.199387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057977Jy  sigma=1.323875
! Fit after  self-cal, rms=0.057969Jy  sigma=1.323725
wmodel /J0205+2416_X_map.mod
! wmodel: Unable to open new model file: /J0205+2416_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0205+2416_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.17 x 2.216 at 17.92 degrees (North through East)
! Clean map  min=-0.0014544  max=0.12357 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0205+2416_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.123572 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000253011 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.614245 0.614245 1.22849 2.45698 4.91396 9.82792 19.6558 39.3117 78.6234
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  488.404 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0205+2416_X_dfm.log closed on Thu May 19 18:19:40 2016