! Started logfile: /scr/pima/bg219e_uvs/J0158+1307_X_dfm.log on Thu May 19 18:19:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0158+1307_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0158+1307_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.890873 visibilities/baseline/integration-bin.
! Found source: J0158+1307
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10776 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0158+1307_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029714Jy  sigma=24.292991
! Fit after  self-cal, rms=0.761703Jy  sigma=17.947791
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9006 mas, bmaj=2.269 mas, bpa=19.27 degrees
! Estimated noise=0.514831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.184053 Jy
! Component: 100  -  total flux cleaned = 0.224902 Jy
! Total flux subtracted in 100 components = 0.224902 Jy
! Clean residual min=-0.006293 max=0.014105 Jy/beam
! Clean residual mean=-0.000005 rms=0.001760 Jy/beam
! Combined flux in latest and established models = 0.224902 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.224902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068673Jy  sigma=1.544871
! Fit after  self-cal, rms=0.068661Jy  sigma=1.544703
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157687 Jy
! Component: 100  -  total flux cleaned = 0.0245441 Jy
! Total flux subtracted in 100 components = 0.0245441 Jy
! Clean residual min=-0.004497 max=0.007654 Jy/beam
! Clean residual mean=-0.000004 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.249446 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 0.249446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064017Jy  sigma=1.424138
! Fit after  self-cal, rms=0.063987Jy  sigma=1.423214
! Inverting map 
! Added new window around map position (1.4, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00745906 Jy
! Component: 100  -  total flux cleaned = 0.0120294 Jy
! Total flux subtracted in 100 components = 0.0120294 Jy
! Clean residual min=-0.003856 max=0.004343 Jy/beam
! Clean residual mean=-0.000002 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.261475 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 0.261475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062766Jy  sigma=1.390606
! Fit after  self-cal, rms=0.062716Jy  sigma=1.389368
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.144 mas, bmaj=2.491 mas, bpa=17.81 degrees
! Estimated noise=0.319858 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00630086 Jy
! Component: 100  -  total flux cleaned = 0.0103913 Jy
! Component: 150  -  total flux cleaned = 0.0131537 Jy
! Component: 200  -  total flux cleaned = 0.0150896 Jy
! Total flux subtracted in 200 components = 0.0150896 Jy
! Clean residual min=-0.002584 max=0.003289 Jy/beam
! Clean residual mean=-0.000007 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.276565 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 62 components and 0.276565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062022Jy  sigma=1.370469
! Fit after  self-cal, rms=0.061998Jy  sigma=1.369651
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.144 x 2.491 at 17.81 degrees (North through East)
! Clean map  min=-0.0023934  max=0.24022 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.07     KP        0.99     
!   LA        0.98     NL        1.00     OV        0.98     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.99     NL        1.02     OV        0.98     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.97     NL        0.98     OV        0.98     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.03     KP        1.01     
!   LA        0.95     NL        1.01     OV        0.99     PT        0.97     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.98     NL        1.02     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        1.00     
!   LA        0.98     NL        1.01     OV        0.98     PT        1.03     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.01     KP        1.01     
!   LA        0.97     NL        1.01     OV        1.00     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        1.07     KP        1.02     
!   LA        0.99     NL        1.02     OV        0.97     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.01     
!   LA        1.01     NL        0.99     OV        1.00     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.02     
!   LA        1.00     NL        1.03     OV        1.00     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.01     NL        1.00     OV        1.00     PT        0.99     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.061998Jy  sigma=1.369651
! Fit after  self-cal, rms=0.061969Jy  sigma=1.361014
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.504 mas, bpa=17.82 degrees
! Estimated noise=0.319292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.8, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296805 Jy
! Component: 100  -  total flux cleaned = 0.00431427 Jy
! Component: 150  -  total flux cleaned = 0.00523071 Jy
! Component: 200  -  total flux cleaned = 0.00578241 Jy
! Total flux subtracted in 200 components = 0.00578241 Jy
! Clean residual min=-0.001946 max=0.002393 Jy/beam
! Clean residual mean=-0.000004 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.282347 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 98 components and 0.282348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061823Jy  sigma=1.356963
! Fit after  self-cal, rms=0.061826Jy  sigma=1.356769
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061826Jy  sigma=1.356769
! Fit after  self-cal, rms=0.061606Jy  sigma=1.351609
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.506 mas, bpa=17.79 degrees
! Estimated noise=0.318909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114094 Jy
! Component: 100  -  total flux cleaned = 0.000256636 Jy
! Component: 150  -  total flux cleaned = 0.000375328 Jy
! Component: 200  -  total flux cleaned = 0.000527904 Jy
! Total flux subtracted in 200 components = 0.000527904 Jy
! Clean residual min=-0.001626 max=0.001520 Jy/beam
! Clean residual mean=-0.000002 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.282875 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.282875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061573Jy  sigma=1.350773
! Fit after  self-cal, rms=0.061569Jy  sigma=1.350715
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.56782e-05 Jy
! Component: 100  -  total flux cleaned = 0.000177881 Jy
! Component: 150  -  total flux cleaned = 0.000280051 Jy
! Component: 200  -  total flux cleaned = 0.000374474 Jy
! Total flux subtracted in 200 components = 0.000374474 Jy
! Clean residual min=-0.001614 max=0.001483 Jy/beam
! Clean residual mean=-0.000002 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.28325 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 126 components and 0.28325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061555Jy  sigma=1.350384
! Fit after  self-cal, rms=0.061553Jy  sigma=1.350368
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061553Jy  sigma=1.350368
! Fit after  self-cal, rms=0.061552Jy  sigma=1.350277
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.508 mas, bpa=17.8 degrees
! Estimated noise=0.318663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000335028 Jy
! Component: 100  -  total flux cleaned = -0.000334319 Jy
! Component: 150  -  total flux cleaned = -0.000299377 Jy
! Component: 200  -  total flux cleaned = -0.000332441 Jy
! Total flux subtracted in 200 components = -0.000332441 Jy
! Clean residual min=-0.001598 max=0.001532 Jy/beam
! Clean residual mean=-0.000002 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.282917 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 134 components and 0.282917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061540Jy  sigma=1.350004
! Fit after  self-cal, rms=0.061539Jy  sigma=1.349991
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.03219e-05 Jy
! Component: 100  -  total flux cleaned = -6.45706e-05 Jy
! Component: 150  -  total flux cleaned = -8.01656e-05 Jy
! Component: 200  -  total flux cleaned = -8.03864e-05 Jy
! Total flux subtracted in 200 components = -8.03864e-05 Jy
! Clean residual min=-0.001596 max=0.001509 Jy/beam
! Clean residual mean=-0.000002 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.282837 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.282837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061532Jy  sigma=1.349838
! Fit after  self-cal, rms=0.061531Jy  sigma=1.349833
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061531Jy  sigma=1.349833
! Fit after  self-cal, rms=0.061522Jy  sigma=1.349794
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.237 mas, bmaj=3.002 mas, bpa=8.898 degrees
! Estimated noise=0.367028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.82815e-05 Jy
! Component: 100  -  total flux cleaned = -0.000156549 Jy
! Component: 150  -  total flux cleaned = -0.000221929 Jy
! Component: 200  -  total flux cleaned = -0.000222383 Jy
! Total flux subtracted in 200 components = -0.000222383 Jy
! Clean residual min=-0.001619 max=0.001568 Jy/beam
! Clean residual mean=-0.000003 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.282615 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 152 components and 0.282615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061518Jy  sigma=1.349667
! Fit after  self-cal, rms=0.061517Jy  sigma=1.349640
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.41385e-06 Jy
! Component: 100  -  total flux cleaned = -2.85159e-06 Jy
! Component: 150  -  total flux cleaned = -1.90678e-06 Jy
! Component: 200  -  total flux cleaned = 7.9105e-06 Jy
! Total flux subtracted in 200 components = 7.9105e-06 Jy
! Clean residual min=-0.001626 max=0.001525 Jy/beam
! Clean residual mean=-0.000003 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.282623 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 156 components and 0.282623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061516Jy  sigma=1.349608
! Fit after  self-cal, rms=0.061516Jy  sigma=1.349600
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.509 mas, bpa=17.81 degrees
! Estimated noise=0.318448 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.147 x 2.509 at 17.81 degrees (North through East)
! Clean map  min=-0.0014882  max=0.23941 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9009 mas, bmaj=2.284 mas, bpa=19.28 degrees
! Estimated noise=0.514756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.183967 Jy
! Component: 100  -  total flux cleaned = 0.224608 Jy
! Component: 150  -  total flux cleaned = 0.240024 Jy
! Component: 200  -  total flux cleaned = 0.249244 Jy
! Total flux subtracted in 200 components = 0.249244 Jy
! Clean residual min=-0.003791 max=0.004847 Jy/beam
! Clean residual mean=-0.000003 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 0.249244 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.249244 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.509 mas, bpa=17.81 degrees
! Estimated noise=0.318448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00872623 Jy
! Component: 100  -  total flux cleaned = 0.0142653 Jy
! Component: 150  -  total flux cleaned = 0.0181894 Jy
! Component: 200  -  total flux cleaned = 0.021138 Jy
! Total flux subtracted in 200 components = 0.021138 Jy
! Clean residual min=-0.001997 max=0.002190 Jy/beam
! Clean residual mean=-0.000005 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.270382 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 47 components and 0.270382 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.237 mas, bmaj=3.002 mas, bpa=8.898 degrees
! Estimated noise=0.367028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334813 Jy
! Component: 100  -  total flux cleaned = 0.00564635 Jy
! Component: 150  -  total flux cleaned = 0.00732847 Jy
! Component: 200  -  total flux cleaned = 0.00858849 Jy
! Total flux subtracted in 200 components = 0.00858849 Jy
! Clean residual min=-0.001840 max=0.001677 Jy/beam
! Clean residual mean=-0.000006 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.27897 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000601556 Jy
! Component: 100  -  total flux cleaned = 0.00114626 Jy
! Component: 150  -  total flux cleaned = 0.0016093 Jy
! Component: 200  -  total flux cleaned = 0.00198407 Jy
! Total flux subtracted in 200 components = 0.00198407 Jy
! Clean residual min=-0.001703 max=0.001601 Jy/beam
! Clean residual mean=-0.000004 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.280955 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 114 components and 0.280955 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=2.509 mas, bpa=17.81 degrees
! Estimated noise=0.318448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00079918 Jy
! Component: 100  -  total flux cleaned = 0.00114381 Jy
! Component: 150  -  total flux cleaned = 0.00134052 Jy
! Component: 200  -  total flux cleaned = 0.00144304 Jy
! Total flux subtracted in 200 components = 0.00144304 Jy
! Clean residual min=-0.001674 max=0.001542 Jy/beam
! Clean residual mean=-0.000002 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.282398 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 134 components and 0.282398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061552Jy  sigma=1.350323
! Fit after  self-cal, rms=0.061542Jy  sigma=1.350205
wmodel /J0158+1307_X_map.mod
! wmodel: Unable to open new model file: /J0158+1307_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0158+1307_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.147 x 2.509 at 17.81 degrees (North through East)
! Clean map  min=-0.0015348  max=0.23956 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0158+1307_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.239558 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000388979 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.48712 0.48712 0.974241 1.94848 3.89696 7.79393 15.5879 31.1757 62.3514
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.239 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  615.864 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0158+1307_X_dfm.log closed on Thu May 19 18:19:24 2016